Resume - Twenty-two years in leadership and management with ten years experience in the P...

Misco Jobs

Resume #84622

CONTACT INFORMATION:
View contact information...

Objective:
To maintain a successful career as a HSE supervisor, by managing, educating and informing personnel of local, state, and federal regulations, while promoting and attaining a "Behavioral Based" safe working environment.

Education/Certifications/Skills:
* Graduate of Ross S. Sterling High School 1982 Baytown, TX.
* Radio Teletype School 1983 – 1984
* Petrochemical Processing Technical School 1998
* EMT B Course 1999-2000
* Lee College Courses 2001:
-Safety Program Management
-Accident Prevention, Inspection, and Investigation
* Essentials of OSHA Compliance
* First-Aid/Adult and Child CPR 2003
* Office Management (35-40wpm.)
* Record Keeping/Required Monthly Reports
* Generation and Submission of Worker Comp. claims
* Basic computer skills
* MS Word/Excel
* Injury/Case Management
* OSHA Gen. Construction Standards 1910/1926
* New Hire Orientations
* Pre employment Physicals
* Full face/Half face fit testing
* Vessel/Confined Space Entry Trainer
* SCBA Application
* Oxy/Fuel Trainer
* Harness/Ladder/Fire Extinguisher Insp.
Compitant Trainer for:
* HazCom/PSM
* Permitting Process
-Lock Out Tag Out
-Line Break
-Hot Work
-Excavation Safety

Experience:
* Mar. 2009-Apr. 2009
Timec- Safety Specialist
Conoco/Phillips- (Ponca City, OK.)

* Dec. 2008-Feb. 2009
Timec- Permit Writer/Safety Specialist
Exxon Mobil- (Torrance, CA.) F.C.C.

* Mar. 2008-Nov. 2008
C.S.S.- Permit Writer/Safety Specialist
Winnie Wood Refinery-Winnie Wood O.K.
Lyondell Bassell - (Houston, TX.) (SRU/HDS)
Exxon/Mobil- (Torrance, CA.) Coker

* Dec. 2007-Feb. 2008
HealthSafe Inc. - Fire Marshal/Permit Writer
B.P. - (Carson, CA.) (Turnaround Alky/F.C.C.)

* Sept. 2007-Nov. 2007
Nooter Const. - Safety Rep.
B.P. - (Toledo, OH) (Shutdown F.C.C. /CO Boiler)

* May 2006-May 2007
A.S.R. Safety-Safety Supervisor/Permit Writer
PRSI- (Pasadena, TX.)(New Const. S-ZORB)

* Mar.- May 2006
Madison LTD.- Safety Tech
Conoco/Phillips- (Trainer, PA.)(Outage)

* Feb.-Mar. 2006
A.S.R. Safety-Safety Coordinator/Permit Writer
PRSI- (Pasadena, TX.)(F.C.C.U. Outage)

* Sept.-Nov. 2005
Madison LTD.-Safety Tech
Valero- (Del. City, DE.)(Turnaround/Coker)

* Jun.-Sept. 2005
A.R.S Safety- Safety Coordinator
PRSI- (Pasadena, TX.)(Unit Demo Project)

* Apr.-May 2005
Hagameyer- Safety Tech.
LCR- (Pasadena, TX.)(Turnaround/SRU)

* Feb.-Mar 2005
ISH Safety- Safety Tech./Permit Writer
Flint Hills - (Corpus, TX.)(Turnaround)

* Oct. 30-2004 to Nov. 10-2004
Rimcor Inc.- Safety Director
DOMTAR- (Ashdown, AR.)(Turnaround)

* Apr. 2002 to Jul. 2004
Kellogg Brown & Root- HSE Tech./Coordinator
DOMTAR- (Ashdown, AR.)(Small Caps)
CHEVRON- (St. James, La.) S.M.-1 (Shutdown)
BP SOLVAY- (Pasadena, TX.) Closeout
EXXON/MOBIL- (Baytown, TX.) (Shutdown)

* Nov. 2001 to Apr. 2002
Fluor Global Services - TAR HSE Coordinator
BP/AMOCO- (Texas City TX.)(Turnaround)
Four Units: ARU/UU4/SRU/Ultra Cracker

* Jul. 1999 to Nov. 2001
Kellogg Brown & Root - HSE Tech./Permit Writer
BASELL- (Pasadena, TX.) (Shutdown)
AKZO NOBEL- (Pasadena, TX.) (Shutdown)
BP/AMOCO- (Texas City, TX.) (Maintenance)
OXYCHEM- (Deer Park, TX.) (Construction)
SHELL- (Deer Park, TX.) (Construction)
DU PONT- (Richmond, VA.)(Maintenance)

* Jan. - Jul. 1999
Met'l Span - Chemical Control Supervisor
Richmond, VA.

* Mar. 1996 - Oct. 1998
Weatherford Compression – Mech./Fabricator
Corpus Christi, TX.

* Feb. 1995 - Nov. 1995
Brown & Root - Iron Worker Helper
Houston, TX.

* Dec. 1989 - Nov.1994
American Wires - Sales/Route Driver
Houston, TX.

* Nov. 1986 - Dec. 1989
Discount Tire - Asst. Sales Mgr.
Houston, TX

Military:
* Oct. 1983 - Sept. 1986
United States Army: Ft. Polk, LA.
Discharge: Honorable
Security Clearance: Secret (Inactive)

Passport Status:
Current/ No Restrictions

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1401 to 1450 of 1622)

Go to Search Parameters...

Brief Description

To be part of a strong team of intellectuals saddled with challenging tasks, targets and responsibilities requiring a high degree of dedication in a conducive and friendly environment that upholds the tenet of customer satisfaction without jeopardizing profit and standards.

Engineer (Design & Vendor Development), (CAD/CAM) Engineer, 1)Planning and maintaining Our Section and the Customer regarding the Development 2) Visit Companies for our tools Development & make Reports on Current Status3)Responsible for the job planning and implementing with the schedules

Senior project planner schedule with 12 years heavy industry and construction projects experience ,professional in using MS Project,Primavera P3&P5,MS office,CMMS systema like SAP R/3 , Maximo. Strong technical background , project management and cost control, contract and claim adminstration

INSTRUMENTATION ENGINEER

Planning, Scheduling, Primavera, Risk management, Pertmaster

I am an M.Tech in Energy Technology and M.Sc in Chemistry. Have Experience Non Conventional Energy Field. Well aware of Electrochemical Power Sources like Fuel Cell, Battery etc. Basic computer skills including language C, C++, Matlab etc.

Mechanical Engineer with wide experience in Manufacturing, Maintenance, Sales and Service, Application Engineering, Project Engineering and Administration. Total experience of 30 years. Can work in any field like Construction, Hospitality Industry and Process Industry.

Ms-word,Ms-Excel,Proficient in management,General HSE certification, HSE Competency Development Course Level 3

If you need a dedicated expert heavy equipment/drill rigs/are welder/fab/design, hydraulics, air compressors, all around field/shop management, i can design/build & repair anything with or without a big budget, will work on contract are as needed!!

Cummins Sales & Service Pakistan (Power Generation)(Nov2007 – to date)Mining Experience(2004-2007):

Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre-commissioning Engineer, Commissioning Engineer, Start-up Engineer, Process Engineer, Chemical Engineer

Repairs, servicing, maintenance of electronic systems

iosh managing safely and osha in construction safety and health qalified hse officer with 9 yrs experience in safety. other trainings attended: basic rescue, work safely at heights, scaffolding, first aid, fire fighting etc. work experience in india and middle east in construction projects.

Geology degree and Geology Honours degree. Two years exploration geology experience. Currently busy with Masters degree in Hydrogeology on part time basis. Working as geologists at Hydrogeology company.

Detail oriented Instrument and Controls technician seeking international opportunities

20 years experience in Industrial Electronics, Electrical,Mechanical, Pneumatics, Hydraulics

Involved in all construction activities including fabrication , installation and control off all structural items.Steel structural estimates include, pipe-racks, elevated pipe supports, pump shelters, access platforms, handrails, et

2 years experience in an Open pit coal mine. I have done long term planning for pit and dump, various professional reports, tailings dam design and monitoring, and yearly budget planning. Therefore, I have experience in both mining and geotechnical engineering.

Good time management, ability to work with or without supervision and a working experince in a oil and gas industry

Mechanical Engineer, 12 Years Gulf Experience In Maintenance Department

Dynamic Health & Safety Coordinator Looking For Work In Mining, Heavy Construction Or Oil Industry

im interested in doin marine and i spoke wel in english and i know hindi also and my specification is doin work in any circumstances

Occupational Health Safety & Environmental Practitioner, Post Gruate Cert. in OHS&E Management

Workplace Safety Health Environment Coordinator - Moreton Island Oil Spill Clean Up Project

12 years experience in instrumentation mining processing plant.holder of a craft certifitecate in process control instrumentation.

Chemical/Natural Gas Engineer

Education: M. Sc., Chemistry, Specialisation: Heterogeneous Catalysis; Work experience (current occupation), Researcher, Subject: Preparation supported metal catalysts, Goal: Development self-invented technique; International experience: Manager & windsurf instructor, Aruba, Dutch Antilles

Commissioning, servicing, maintenance, diesel gensets, engine-alternator alignments, overhauling diesel engines.

HSE ENGINEER AND SUPERVISOR

Graduated 09/2004 in Master of Science (Mechanical Engineering) from The University at Buffalo, The State University of New York. Emphasis: Design Optimization. 8 years experience in facilities management (water, fire protection). Extensive experience in South and South East Asia.

Twenty-two years in leadership and management with ten years experience in the Petrochem/Paper Mill industry. Ten years in health and safety in the fields of general construction, maintenance, Turn Around/Shutdown. Able to identify at risk behaviors, trends, and policy infractions through observati

BE in Mechanical Engineering.

Maintenance Technician

Experienced CAD-GIS Professional/Consultant with years of experience in Autodesk design softwares such as AutoCAD, Civil 3D, Map 3D, MapGuide Enterprise and Raster Design.

Marine Geologist with experience in Bathymetric, Oceanographic, Geophysical and Geotechnical Data Processing and QA/QC. Proficient in MicroStation, uSMART and InRoads mapping softwares.

To obtain a challenging, high demand QA/QC, Power Generation Tech, Electrical or Mechanical position utilizing my skills and experience in all fields.

Catia V5, Unigraphics, Pro-Engineer, Solid Edge

Working as a Piping Supervisor in the field of Oil/Petro-Chemical industries Maintenance & Project Work.

I have the qualifications and experience you are seeking. I am certified as a Journeyman Refrigeration Mechanic, Journeyman Electrician, and Controls Technician. My experience includes over 17 years in construction and service of mechanical systems.

Seven years of hands on mining experience in surface and underground mining of rock salt, silica sand, high alumina clay (fire clay), and limestone

Supply Chain and Procurement Professional with international oil and gas project experience!

Comupter And Office applications, Microsoft word proficiency,Good analytical skills

I have done B.Sc Chemistry with First class & also i have prior experience in Bhart Petroleum Co. Ltd as a Process Trainee.

Rangeland Ecology and Management Degree

CSWIP 3.1 Welding Inspector, MIGAS Welding Inspector, Familiar with Software (Auto Cad, PDMS, Pro-Eng), Familiar with Microsoft Office (Word, Excel, Power Point, Visio)

Diploma in computer engineering from state board of punjab

Security, life support, camp management, logistics

Bilinguel (CSST) Construction Site Safety Technicion

I am an enthusiastic highly motivated Quantity Surveyor / Cost Engineer, with an excellent working knowledge of pre & post contract quantity surveying and also pro-active team member with experience of major construction projects. I have gained deep awareness of contract administration and advanced

Technical Writer / Editor and Proposal Writer

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 [ 29 ] 30 31 32 33

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out