Resume - Experienced Designer

Misco Jobs

Resume #85852

CONTACT INFORMATION:
View contact information...

Objective:
Looking for a full time position in Cad design with an opportunity to learn and grow with a great team of designers and engineers.

Employment History:
Modern Engineering LLC
Dearborn, MI
02/05 - 10/07 Senior Designer
Redsign work for Ford Motor Co. using IDEAS/SDRC Cad system. Work done was on the PN-09 program including design of the seat tracks, all mounting hardware, interior trim and trunk lid and rear body panels. Also supplied detailed drawings using GD&T per ASME Y14.5M-1994

Roush Industries
Allen Park, MI
04/1998 - 10/2002 Senior Designer
Cad design using both PDGS & SDRC/IDEAS software systems. Work included redesigning the overhead stowage tray,floor console,and instrument panel for the F150,250&350 Ford pick-ups. Also supplied detailed drawings using GD&T per ASME Y14.5M-1994.

Modern Engineering
Warren, MI
10/1996 - 04/1998 Senior Designer
Cad design using PDGS & SDRC/IDEAS software systems. Work included left and right hand cowl, airbag sensors throughout vehicle and the anti-theft modules for the Ford Lincoln Towncar. Completed detail drawings per ASME Y14.5M-1994.

Ford of Australia
Melbourne 01/1996 - 10/1996 Senior Designer
Cad design using PDGS software. Redesigned the front body panels, B-pillar and B-pillar reinforcement, roof rails(inner and outer) and heat shield for the exhaust system. Completed detail drawings using ASME Y14.5M-1982.

Pioneer Engineering
Dearborn, MI
10/1988 - 01/1996 Senior Designer
Cad design using PDGS software. Work included Class "A" surface design on the entire hood for the Mercury Marquis.Also designed hood latches,grill,surround moldings and front fascia. Also taught Cad classes at night for eight months for same company.

Modern Engineering
Madison Heights, MI
02/1980 - 10/1988 Designer
Manual design for General Motors. Design included body panels, transmissions & brake systems.Also manual design on hood, roof, inner and outer body panels and all complete detail drawings.

Education:
Design
Major: Automotive Design
Henry Ford Community College
MI Manual Design
Major: Automotive Design
Batavia School of Automotive Design
MI

Certificates and Licenses:

IDEAS/SDRC Cad System, Ford Mo. Co, MI
IDEAS/SDRC Surface Design, Ford Mo. Co., MI
PDGS Cad System, Ford Mo. Co, MI
PDGS Surface Training, Ford Mo. Co., MI

Skills and Abilities:
I also have worked in Tool & Die for three years. I will be completeing the Pro-E training this summer.
Honors and Activities:
I have donated time cooking at the Methodist church in Kingsley Mi for Thanksgivings.
Notes and Other Information:
I am a very hard working father of two. I pride myself as having a very good work ethic! I am always on time and strive to do the best possible job I can!

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 1618)

Go to Search Parameters...

Brief Description

Free! Project Manager with established record of successfully completing large-scale drilling programs. Proficient in prioritizing and directing complicated logistical operations, synthesizing abundant data, and optimizing mineral resource potential.

Free! Experienced hard working Geologist, Underground and open pit experience, Resource development modelling and drill program design and implementation, Very experienced mapping and strong structural background.

A qualified geologist with an exceptional track record in sedimentology, mineralogy, geochemistry of non- clastic sediments and open cut mines of non – metallic ores

I have experience and skills in the following areas: Production Management, Quality Engineering, Project Management, and Purchasing

I am an experienced EIA and environmental management consultant with experience in mining, oil and gas and construction. I have worked in various countries (Kenya, PNG, Pakistan, Afghanistan, Botswana, Sri Lanka, & UK) & have been environment manager for construction of major dams in Laos & Egypt.

Designig water supply distribution,wastewater collection,water modelling,water and wastewater treatmenr,contract documentation and project management

Renewable, Alternative, Energy Development including multiple Biofuels

I am a Senior Environmental Project Manager (> 16 years experience) specializing in Environmental Remediation and Construction Management. My areas of expertise include project management, construction management, scheduling, document control, cost control, quality assurance, and quality control.

24 years of experience as a Cartographer, I am expert at Topographic maps and Nautical charts. I have designed and created atlas and sheet maps. I operate AUTOCAD to digitize maps and covert manual maps to digital maps. I am known for quality work, productivity, and organization.

Responsible for entire Process monitoring, Trouble Shooting/ Rectification or modification for optimum Production in each section.

Environmental monitoring

Individual expert in Surveying - Topography - Land registration - Remote sensing – GPS – Cartography - GIS agreed by the European Commission

BE Mech. API-653/510/571 certified. 16+ years inspection experiance

An experienced Project Engineer - Designer - CAD Manager with very strong concepting /training/team building skills

Experienced Designer

20 years of power generation/desalination engineering expertise

Experience working in electrical and automation field

Electro-Mechanical Engineering Technician, with a demonstrated ability in Research and Development to extract of expandon new or existing corporate core technologies from concept to commercialization, in a variety of industries, including medical devices.

Wastewater and water engineer, experience on several process and equipment on water and wastewater technology. Currently working as a Senior Wastewater Engineer for one US CDM company in Jakarta. Very interesting to see if there is a new company willing to enter Indonesia as their Regional off.

I am an electrical engineer with 24 years experience 10 of which were in a power utility and 14 as an energy and environment consultant. My strengths are in energy planning, energy efficiency improvement and also in climate change.

I got bachelor, master and PhD from three universities in hydrogeology, hydrogeology and engineering geology, and geological engineering. In the past 20 years, I kept my job in geological field and worked for three employers: survey, research, and academic institutions.

A Geophysicist/Seismologist ,Graduated from St Louis University(PhD),and an MS from Stanford University. Have long experience in Teaching, Research, Academic Administration and Management. Bilingual (Arabic and English),A US Citizen. Seeking a post in Northern Virginia (Washington DC Metro Area).

22 yrs experience in environmental science. Marine, freshwater and coastal. Environmental impact assessment. Monitoring, mitigation and remediation programs for impacted habitats. Extensive international experience, wide industry experience. freelance.

Mechanical Engineer having 15 years experiance in tubular n flat products of stainless steel like sheets, plates, coils, pipes in ss304, 316, 304L, 316L.

Senior Environmental Engineer/Manager, Multimedia, heavy industry, permitting, compliance, ISO14001

Attached herewith is my current RESUME. I would like to be considered for a suitable position in the fields of Applied and Analytical Chemistry, Chemical Process Design and Development, Environmental Engineering, and/or Project Management.

Successful manager of operations, projects and people.

Fifteen years experience in leading teams towards effective energy efficiency and Demand Side Management campaigns in petroleum refineries,industrial, commercial and residential sectors. Career tenure included: National Energy Conservation Program (IAC-Industrial Assessment Program)

I am in Saudi Arabia working for a reputed company since 15 years as a bio-medical eng. with matter of broad future and to learn new technology i would like to switch to other company.iam in need of visa too.so as to go and comeback again.

Environmental Microbiologist Phycologist

EHS chemical engineer

Environmental, Civil, Mining, other Engineering. Excellent people skills. Organization talent. Create entire programs/departments. Accomplish tasks quickly and accurately. Save dollars through efficiency. Easily adapt and understand new situations. Continually improve performance.

Mechanical & Electrical Engineering Manager in PT. Muara Manggalindo since June 2007 until now.

Instrumentation & Control Engineering Trainer / Technical Instructors

Graduate in Chemistry with 10 years Cement experience in Chemical Analysis OR a Graduate in Science (Chemistry ) with 14years background in Cement Plant Quality Control procedures.

Telecommunications with over 30 years

Results driven environmental professional with broad-based experience in consultative sales, project management, and operations administration.

Project Manager, PMP, MBA Finance, B.E

Worldwide experience in planning, managing, designing and implementing a wide range of water resources and water supply projects.

French Engineer with international and overseas experience Contract Management, General Management In the field of Water Treatment.

Specializaion in environmental management in an iron ore industry backerup by the experience in a regulatory body dealing with environment conservation.

-University – Master Science in Geology evaluated by York University. -Environmental adviser course – 1000 hours;

HVAC PROJECT MANAGER

I am a proficient project Manager in GIS with ESRI and ERDAS technologies

Environmental Management include the preparation of complete EIA report for various industries in relevant to sustainable use of resources / quality health safety environmental management / various water treatment components. Qualification - M.Sc. in Enviornmental Science.

Five tears of experience in the field of industrial environmental monitoring specially related to petroleum and petrochemical complexes.I have sound knowledge of US EPA regulation. I can also design air air polltion control systems.

M.Sc Applied Geology. M.Tech Min Expln,PG Dip In Envt Mgmt & PGDip In Env Scs, 22 years of experience in govt industry. opte vrs ,desg Manager (Environment)

Seeking a career change to obtain a challenging Project/Process Engineer position in a Water Management company.

I am a chemical Engineer having Post Graduate in Environmental Engg.with safety background with 20 years experience. Past 13 years I have been involved in the implementation of environmental legislations. I involved in contaminated site assessment and bioremediation of contaminated site.

25 years of experience in the environmental aspects of power plants and the oil and gas industry. Work experience in Southeast Asia, Middle East, West Africa, East Africa, Central America, South America, North America, Eastern Europe, UK, USA, Former Soviet Union

[ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out