Resume - PDS, Micro Station, AutoCAD

Misco Jobs

Resume #85912

CONTACT INFORMATION:
View contact information...

Career Objective:
An enthusiastic, Versatile, Young individual seeking an opportunity to play a challenging creative role with a commitment to company's excellence.
Professional Qualification:
Degree: Bachelor of Engineering in Mechanical (B.Eng.)
University: Bharathidasan University, Tiruchirappalli.
Period of Completion: April 2003
Software Proficiency:

Application Packages: PDS, Micro Station-V8, Auto Cad 2008.

Key Competencies:

„` Having through knowledge on Design of Piping system, Determination of Diameter and thickness (based on flow and strength). Shapes and tolerances, material selection concept (based on Temp and application), code allowable stress, piping codes and standards with code comparison, Loads and Loads combinations, Stiffness and Flexibility check and analysis, Branch connections, Valves, fitting and Flange design concept, Nozzle reinforcement calculations, Water/steam hammer concept, piping insulation design concept.
„` Theories of failure applicable for piping, supports and restraints and spring selection concept. VLH and CLH selection procedure. Allowable support span, Rigid and flexible support, hangers, limit stop and guides.

Career profile:
September, 2007 - Till Date: Worley Parsons, Abu Dhabi, UAE
Role: Piping / Mechanical Designer
Environment: PDS, Micro Station ¡V V8, AutoCAD 2008

Projects:

1. Emirates Aluminium Smelter Complex (EMAL), Abu Dhabi, UAE.

Contribution:

* Scope of work involved piping layout design & PDS modeling for several Equipments, GAD for IFC, Support Placement as per stress requirement, Resolved Interference detection.
* Piping Study layout with reference of Plot-Plan, Process P&ID, Utility P&ID, Line-List, Civil Drawing, Piping Specification, Equipment Data sheet, Instrument specification, etc. to identify location for equipments and associated infrastructure for routing the piping.

* Preparation of equipment / piping sketches and model in PDS; extracting 2D drawings from 3D model; Support selection.

* Preparation of GA-s for Underground piping; MTO; Vendor Package Reviews.

* Preparing drawing lists, equipment lists, line lists, valve lists, instrument lists.

* Checking the clashing with other discipline model.

* Special Pipe support Drafting and Detailing using Micro Station.

* Plant drainage systems & layout drawings.

* Developed conceptual layouts with minimal information during early stages of plot plan development.

December, 2005- September, 2007: Fluor Corporation (PMC ¡V KOC), Kuwait
Role: Piping CAD Designer
Environment: AutoCAD 2005

Projects:

1. Replacement of 9 No.s crude oil filling lines
2. KOC feed pipelines for new refinery project (NRP)

Contribution:
* Preparation of PFDs, P&IDs (PEFS/UEFS)
* Piping General Arrangements. Including piping and equipment sections and piping details
* Preparation of Piping Layout, Isometric drawings, Pipe support schedule, Line schedule.
* Development of equipment layout and plot plan.
* Preparation of material specifications for piping and supports.
* Knowledge of codes (API, ASME etc.) and standards.
* Review of vendor drawings and documents.
* Checking and reviewing of piping layouts and inter discipline layouts.

June, 2003 ¡V November, 2005: Hofincons InfoTech & Industrial Services Pvt. Ltd

Tyco Hofincons is a pioneer in providing Industrial solutions in the areas of Design and development of 'Planned Industrial Equipment maintenance packages (Computerized Maintenance & Management Systems (CMMS)), MAXIMO, IMPACT, Material coding and cataloguing viz., MESC, Stock Analysis, Noun modifier (NOMCAT), BOM preparation, Updating & Up gradation of Maintenance data for ERP. It offers specialized services in Asset Management, Reliability studies and Industrial consultancy.

Projects:
1. Updating and up gradation of Maintenance Data for SAP implementation for Qatar Petroleum, Refinery.

Role: Documentation Leader & Team Member in PM / MM Module
Location: Doha, Qatar
Environment: AutoCAD 2005, Windows xp, Ms Access

Contribution:
* Collection of Data Sheet, Specification Sheet for Technical Objects preparation.
* Collection of Parts List, SPIR, and Cross Sectional Drawings of the entire refinery related equipments for Bill of
Materials preparation.
* Collection of Assembly Drawings, Vendor drawings, Manufacturer's drawings of all static equipments for the Shutdown Activities.
* Collection of Installation & Operation Manuals of all Mechanical & Electrical Equipments for the PM Activities.
* Involved in the activity of Physical Asset verification of all Plant Equipments.
* Updating Piping & Instrumentation Diagram (P&ID) using AutoCad2005.

2. Hierarchy buildup for ADMA-OPCO (Abu Dhabi Marine Operating Company), Abu Dhabi.

Role: Team Member ¡VMechanical
Location: Chennai, India
Environment: Windows xp, Ms Access.

Contribution:
* Preparation of Master Tag List from Piping and Instrumentation diagram and Vendor packages
* Loop Identification from P&ID and Instrument Loop Diagram.
* Verification of P&ID and Hierarchy building for criticality analysis.

Software Proficiency:

Application Packages: PDS, Auto Cad 2008, Micro Station-V8,

Personal Profile:
Date of Birth: 9th June 1982
Sex: Male
Religion: Islam
Nationality: Indian

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 1619)

Go to Search Parameters...

Brief Description

Environmental Manager/Top Wastewater Licenses

PhD environmental engineering/bioremediation, MSc environmental diagnostics, BSc (Hons) Biology

Licensed Professional Engineer registered in British Colombia and Alberta, and able to be registered in other Canadian, U.S. and international jurisdictions.

Mechanical Engineer, Static Equipment, Pressure Vessel, Heat Exchanger, Tank

Geologist/Exploration geologist

5 years as a assistant Analytical Chemical Technician

I have the EIT license and took the PE Exam on April 2009. Familiar with SAP 2000, Staad Pro, Mathcad, AutoCad, and ABAQUS. Academic experience in Civil/Structural Engineering, and professional experience in Environmental Engineering. I am looking to relocate to the Boston Area.

HSE Learning/Development Professional seeking position in an industrial setting.

Fire Safety Engineer

Mechanical Engineer, EIT

6 Years Exp. In LAN, WAN, VPN, VLAN, VOIP, Microsoft Servers, IIS, ISA, Exchange, Lotus Note, Backup

I would like to work in IT department to give the company from what I gain experiance and knowledge

PDS, Micro Station, AutoCAD

CHEMICAL ENGINEER

Degree in Chemical Engineering at the University of Pretoria. I see myself as an enthusiastic and disciplined person who will give his all in his career. I am very eager to learn to I am looking forward the opportunity of learning the inn’s and outs of industry

Installation, Testing and Comissioning of various SCADA and Telecommunication related equipments

Environmental Engineer( solid waste management)

Experience in Collection and processing of Ground Control Points data using Geodetic quality GPS receivers and LGO(Leica Geo Office & TGO (Trimble Geomatics Office)

My Q-HSE management experience spans more than 20 years and includes a broad spectrum from that of worker, public safety officer and emergency responder to educator, consultant and civilian contractor to both construction and general industry clients, including 21 months in Afghanistan.

Graduate Structural E.I.T.

I have 12 years experience as an engineer in mechanical engineering field. I worked last 10 years as a Ship Repair Engineer and Project Engineer. I can undertake full responsibilities and worke idepenerntly in teams. I respect and highly dicipline person.

Health, Safety, Security & Environment Management professional (BE, MBA) from premier Indian Educational Institute, with expertise in audit, compliance, policy and consulting

Ingenieur in the Industrial Chemical

Thermo-Energy Engineer

I am presently a PhD student looking for Industry Coop. and Intership

Senior Construction Manager

Geotechnical engineer with international experience

SPCC,AUTOCAD,GIS,MICROSOFT OFFICE,FRENCH,AIR POLLUTION MONITORING,ORGANIZED,TEAM PLAYER,QUICK LEARNER.

Technical Author, Trainer, Project Manager

Broad experience of oilfield infrastructure, water,sewage treatment , gas turbine stations, oil pipelines, rig sites, industrial building, housing, earthworks, rail & general civil, mechanical & electrical works in UK, Africa & Asia. Project and Site Management in a variety of challenging locations

Engineering/Project Manager skilled in organizational/project management/business development. Highly skilled in client relations/development. Diverse experience in environmental consulting/nuclear power/regulatory compliance/facilities/systems engineering/infrastructure projects.

Metallurgist/Mill Engineer, Grinding/Flotation/Cyanidation/Solvent-Extraction/Electrowinning

Laboratory Techniques, computing skill, creativity, communication skill.....

Telecom Field Engineer :- Having experience in telecom planning, field survey, telecom construction, testing, and maintenance of Telecom field & quality assurance. Installtion & testing of telecom equipment & networks.

AutoCAD MEP 2009; Revit MEP 2008, Civil Survey CAD programs

I am proficient in a lab setting and work very well in a team setting. In me you will find a hard working, cheerful person who takes her work very seriously and is always up for a challenge.

Spainish Citizen

I am a hardware engineer and a hardworking person

Site investigation, Design of Foundation, Design of Embankment and Retaining Structures, Slopes Stability, Numerical Analysis, Constitutive Modelling, Contaminated Land Remediation, Ground Work Supervision, Mining Engineering, Total Station and Precise Level Surveying.

Power electrical engineer from Aleppo university

17 year experience in environmental management as Head - EHS and GM (Env. Tech) in large environment consulting and waste management co

Over five years of experience in Environmental Engineering including environmental evaluations, water quality impact analysis, environmental permits and environmental management.

Diversified: Nuclear Power Clearance /Mechanical/Electrical/Civil/Architectural/GIS Map/Water Design

31 yrs im field. I have ben an Electrical Field Engineer For a long time

Qualified, results-producing Management Professional with experience steering and directing all aspects of operations, administration, budgeting, and equipment maintenance. Successful in managing multiple projects with compelling priorities involving program development.

Broad-based experience covering a full spectrum of health safety and environmental services, including, Environment and Earth Resource management, and experience in administration and consulting. Knowledge of environmental tools: life cycle analysis, environmental impact assessment and HSE

Diesel Generator Mechanic, Knowlegde in Computor Hardware

PIPE DESIGNER, More than twenty-five years experience in Technical drafting, piping and equipment hands on field work in the Chemical Manufacturing environment.

Experience has been gained operating from supervisory, management and design standpoints on a variety of E&IC contracts within the U.K. and overseas.

PhD chemical engineering, 15 years experience as operations and academic teaching

1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out