Resume - Fifty Years Total Experience in process engineering and technology development. ...

Misco Jobs

Resume #86532

CONTACT INFORMATION:
View contact information...

M.S., Chemical Engineering, Drexel Institute
B.S., Chemical Engineering, CCNY
Certificate, Business Administration, UCLA

Registered Professional Chemical Engineer, California
Member/Fellow, American Institute of Chemical Engineers
Emeritus Member, American Chemical Society

Fifty Years Total Experience in process engineering and technology development. Including More Than Twenty Years Process Engineering Experience on petroleum refinery, oil & gas production and petrochemical projects. Experience includes process simulation software Hysys/Pro II/Dynsim/Aspen (Distillation, Heat Transfer Trains, Hydraulics - conventional and advanced designs), Excel spreadsheet programs (Pinch, equipment, pump, compressor, line, valve, relief system, flare sizing and specification sheets), heat and material balances, PFDs and P&IDs.

Fields of Experience include petroleum refining, oil & gas production, petrochemical, gas processing, energy and water conservation, waste-to-energy and alternate fuel development projects.

2009 to Present: Proprietor of Samuel Woinsky Consulting. Solicitation and execution of various assignments in the following areas: process and cost engineering, process debottlenecking, pollution prevention, water and energy conservation, and technical marketing, sales and legal matters.

2006 - 2009 Bechtel: Major responsibilities have included:

My last Bechtel assignment was as a Process Engineer on an Exxon Mobil LNG Feed project doing resolution work relative to the differences between the client's and Bechtel's relief specifications, equipment datasheets, relief narratives/calcs/datasheets and PUD development.

My second Bechtel assignment was as the Process Engineering Lead for a section of a confidential new-technology project for Chevron. I managed up to four people and also was actively involved in producing work product myself. Issues were uncovered and numerous suggestions were made by my team. Many of our suggestions were accepted by the client. The work included IFA and IFD PFD development and H&MB, equipment datasheet and relief work (narratives, calcs and datasheets) relative to these PFDs. This work was done under strict client intellectual property protection rules.

My first Bechtel assignment was as a Process Engineer on the Motiva 350,000 BPD Port Arthur Refinery Crude Expansion Project (will be the largest U. S. refinery upon completion). Responsible for work on the new crude atmospheric and vacuum distillation units and crude preheat trains (performed rough Pinch analysis leading to symmetrical parallel crude preheat trains, heat exchanger data sheets, furnace margin analysis). Worked on process and control narratives for the new crude distillation units, saturated gas plan, delayed coker, naphtha hydrotreater, reformer and isomerization units. Worked on crude atmospheric and vacuum distillation units' relief PSFDs, narratives, calcs and data sheets.

Previous Work History:

2005 - 2006 Contract Process Engineer for Nana-Colt assigned to various process studies. Upstream oil & gas work included successful completion of two tight budget, tight schedule projects (recommended control and equipment changes to stop failures of existing progressive cavity pumps and provided conceptual process input to Cost Estimating for ultra low sulfur diesel storage and truck loading project), successful completion of a debottlenecking study for expansion of an oilfield (recommended piping and equipment additions vs extent of expansion), successful completion of dynamic simulation projects using Dynsim: (1) recommend valve and control changes to preventing production shut-downs when compressors fail, while not over pressuring the flare knockout drum have been implemented (to date, one plant shutdown has been avoided), (2) sized control valve to drive pig with gas to purge water line and not exceed 20 ft/sec, (3) determined control valve size and location for gas heating of a -50 deg F water line to avoid appreciable JT cooling of the pipe, and keep pipe temperature gradients low enough to avoid damaging the pipe supports, work on a number of pipeline pigging designs (new offshore/onshore facility, decommissioning of a NGL pipeline and installation of a temporary pig launcher for environmental compliance), and developed/presented a Dynsim training course.

2001 - 2006 Proprietor of Sam Woinsky Consulting. Solicitation and execution of various assignments in the following areas: process and cost engineering, process debottlenecking, pollution prevention, water and energy conservation [developed Excel programs (to estimate equipment efficiencies, utility and other operating costs, equipment and plant capital costs, and internal rates of return) for a book being written (about 90% complete) "Process Economic Analysis Made Easy"].

1997 - 2004 Chemical & Petroleum Program Manager for EPRI Chemicals, Petroleum & Natural Gas Center (on a contract and consulting basis) responsible for oil & gas production, petroleum refinery and petrochemical conceptual projects (thermal, water and hydrogen Pinch studies, advanced distillation studies and cogeneration, environmental and debottlenecking assessments). Personally developed and presented training courses ("Petroleum Refining Made Easy" and "Petrochemicals Production Made Easy") and, researched and wrote EPRI reports on Advanced Distillation and Water and Wastewater Management (includes expert process selection & water use minimization).

2001 - 2002 Contract Process Engineer for Foster Wheeler assigned to various process studies. Refinery work including analyzing an under performing crude/vacuum column crude preheat train (identified cause as off-spec operation due to OVHD corrosion problem, identified short-term improvements involving only minor repiping for upcoming winter operation, performed partial Pinch analysis and identified longer term preheat train solutions, performed dual condenser simulations to identify potential column modifications to increase OVHD temperature to solve the corrosion problem), simulation of a naphtha splitter to meet specs, a crude/vacuum column/coker heavier feed revamp conceptual study and a caustic carryover problem.

1993 - 1997 Director Strategic Product Development for ACS Industries' Separations Technology Division responsible for development of new products. Ultra-high capacity mist eliminator designs and computer expert equipment design systems for mist eliminators and valve trays were successfully developed.

1995 - 1995 Proprietor of Sam Woinsky Consulting. Solicitation and execution of various assignments including continuation of work for ACS, development of a conceptual first-of-a-kind process flow diagram, heat and material balance and economic analysis for a coal cleaning process, and Pollution prevention assessments at plants in former USSR republics.

1989 - 1993 Technology Development Manager for the M. W. Kellogg Company responsible for environmental, remote gas utilization and cumene/phenol technology development projects. A low residence time cumene-hydroperoxide to phenol/acetone reaction was developed, commercialized and licensed.

1987 - 1989 Manager of Technology Development for Kinetics Technology International (KTI) responsible for various technology development projects. Wrote winning proposal to DOE and managed the resulting successful execution of a brewery Pinch analysis.

1985 - 1987 Technical Project Manager and Advanced Technical Projects Adviser for Santa Fe Braun responsible for various projects including studies and pilot-plant work on an advanced thermal enhanced oil recovery project, and work on getting into the waste-to-energy business.

1982 - 1985 President and owner of Research Services Incorporated responsible for Solicitation and execution of various assignments related to technical sales and new technology development.

1977 - 1985 Part-time Lecturer for California State College, Long Beach California lecturing on process plant design, kinetics, fluid flow, process control, production economics.

1974 - 1982 Various positions for Occidental Petroleum's Occidental Research Corporation including Assistant to the President, Manager of Laboratory Projects Planning and Technical Recruiting, Senior Commercial Development Engineer and Contract Research Engineer.

1965 - 1974 Senior Research Engineer and Process Engineer for C. F. Braun assigned to equipment development pilot and semi-works research and writing design methods, and process design work on refinery, ammonia, ethylene and other projects.

1957 - 1965 Plant Technical Service and Development Engineer for Atlantic Richfield assigned to refinery studies and startups, and refinery and petrochemical bench and pilot process research projects.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 1622)

Go to Search Parameters...

Brief Description

3D Modeling, FEA, ANSYS, GTSTRUDL, STAAD, RAM, RISA, CAESAR II. USA, British, Euro, China, Russia Codes and Industries Standards.

LekCV

I am an electrical engineer working in Torrent Cables Ltd as electrical maintenance engineer since 1994. I have 12 years exprience. I have exprience of A.C drive, D.C. drive and other electrical instruments.

Aerdynamic principals, aircraft structures and analysis, systems engineering, experienced with MS Office, CATIA V5, ANSYS, and AutoCAD

Civil Engineer

Process Design and Commissioning of Raw Water Treatment Plant, Waste Water Treatment Plant, Demineralization water Treatment Plant, Tertiary Treatment Plants ,Solid and Hazardous waste management, Safety and Environmental Audits etc for mega oil Refineries and Petrochemical Complexes.

Enthusiastic Environmental Geologist with MS in Geology

I have seven years of experiences in the field of water well drilling as a hydrogeologist .

Autocad draughtsman 19 years mainly civil/structural experience

An engineering post-graduate with specialization in environmental engineering. Overall work experience of more than 14 years with majority in Petrochemical.Career Objective-To excel in the field of Industrial Environmental Management by virtue of knowledge, team work and self motivation.

A driven environmental major with positive outlook & expertise in business

I am a bilingual and experienced GIS professional looking for a challenging position with increasing responsibility that requires strong technical skills and proven leadership ability.

Over 10 years of environmental experience with same company! I can provide the following; • Phase I and Phase II Site Assessments • Asbestos inspections • Groundwater studies • Environmental assessment worksheets • Mineral analysis • Hazardous waste compliance audits

Process Engineer with experience in the design, commissioning and operation of a copper smelter. Worked for engineering firms on various projects for lead and zinc, gold, nickel/cobalt and sludge incineration.

In Geotechnics I ensured the supervision, the control and the establishment of design reports for several geotechnical investigations of large civil structures in soft and hard grounds : special foundations, retaining structures, soil improvement and reinforcement by geosynthetics' products,

Geologist and expert of GIS/Remote Sensing and Digital Image Processing

Bachelors degree in Electrical Engineering Technician. Interested in any position utilizing my degree. Very detailed oriented and committed to completion of projects. New graduate seeking employment.

I am currently looking for a position as a maintenance manager, supervisor, or engineer. I am a highly qualified maintenance professional have over 20 years of leadership experience in the manufacturing and production industry. I have obtained exceptional skills and experience in maintenance manage

position as an MEP Design management, Sustainable Design, LEED Facilitation, Building Commissioning, and Building Energy Modeling for High Performance Buildings.

30 years experience in civil and horizontal projects

Detail-focused and culturally-sensitive professional offering more than 20 years of increasingly-responsible experience. Track record of completing complex projects on time and under strict budgetary guidelines without sacrifice to overall project quality

Im an Mechanical Engineer I have full training and exposure in Safety Health environmental code Im fully aware of the OSHA, NFPA, the ISO 14000, ISo 18000, and the ISO 2000 im an auditor for safety health and environment also an inspector for HVAC facilities.

* Seven years concentrated consulting experience * One project was awarded the Grade II "Excellent Designing" by the Construction Ministry of China

Double French/Argentine Nationality Entry Level Environmental Engineer, fluent in Spanish and English languages, willing to relocate world wide. EIA preparation, ISO 14000, Environmental Management & Consulting, Bio diesel technology, etc.

OBJECTIVE Seeking a position with a consulting company as a consultant to utilize a wide background of environmental projects, experiences, and a strong background in computers.

My goal is to pursue a career in the geomatics industry where I can apply my skills to effectively communicate and present results through software customization, database management and maintenance, data analysis as well as continuing to learn new GIS principles and techniques.

PhD, CFD, Fortran, Matlab, C++, Fluent, Gambit, Tecplot, AutoCAD, ArcGIS

Chem Analyst - Laboratory Technician

CA licensed geologist (CEG&RG). More than 24 years of professional experience in engineering geology and environmental consulting in CA & HI, including 16 years as supervisor/owner. Currently self-employed with own environmental consulting firm in HI since 1992. Relocating to AZ (Tucson or Phoenix)

Ability to work in team with high collaboration Capable of achieving personal objectives as demonstrated by successful completion of my degree Excellent analytical and problem-solving skills Extensive experience with public conference and presentation. Good knowledge in radiation protection

Experienced in autocad ,microstation and manual drafting. 32 years in civil and structural design

Over five years of Mechanical Engineering experience in various organizations in US. * Highly proficient in development, design and analysis of Energy systems like Industrial Gas Turbine, Aero derivative Gas turbines, Fuel Cell Systems.

MA(ECONOMICS), PGDCA, HEALTH & SAFETY MANAGEMENT DIPLOMA, FIRE AND SAFETY MANAGEMENT DIPLOMA, FIRST AID DIPLOMA, CONSTRUCTION SAFETY CERTIFICATE, COSHH CERTIFICATE, SAFETY MANAGEMENT CERTIFICATE, OHSAS-18001-1999 HEALTH AND SAFETY INTERNAL AUDIT, ENVIRONMENT AWARENESS CERTIFICATE, MANUAL HANDLING CE

Civil Engineer expert in computer and water sector

More Than five years of professional experience in: Analyzing Business requirements. Usage of ArcGIS, ArcIMS, ArcSDE, ArcXML and ESRI based products.

Summary of Qualifications,Combined experience in Industrial Refrigeration Technician / Electrician Technician in the Pharmaceutical Industry,Petro chemistry, Building Management System (BMS), Ship Systems, Maintenance and Troubleshooting.

I have exp. 16 months as fire&safty supervisor, 18 months as a electrical technician

Fifty Years Total Experience in process engineering and technology development. Including More Than Twenty Years Process Engineering Experience on petroleum refinery, oil & gas production and petrochemical projects. Experience includes process simulation software Hysys/Pro II/Dynsim/Aspen.

Petroleum Geologist with 20 years international experience

Pro/ENGINEER, AutoCAD, SAS, Microsoft Office, MSC NASTRAN

A Mechanical Engineer with over 11 years of proven functional experience and can perform various roles in Manufacturing, Programming ,Design and Materials Procurement / Material Management.

I am the head of the laboratory at the moment. I have been working in the metrology field for 6 years and I deal with the following: preparation of gas mixtures by gravimetric and dynamic methods, gas analysis on GC, NDIR, FTIR and others. As the head of the lab I deal with clients.

LOOKING FOR A CHEMIST AND/OR ENVIRONMENTAL POSITION THAT ALLOWS ME TO APPLY MY 9 YEARS OF EXPERIENCE AND EDUCATION IN CHEMISTRY.

Experienced Industrial Structural Engineer - concrete, steel - 20+ years, UK & US codes

Exceptional performance as a Senior Process and Production Engineer for major industrial, polymer, refining, and specialty chemical manufacturing companies on the Texas Gulf Coast.

Diploma In Mechancial Engineering+NEBOSH Level-3+Environment, Health and Safety Management Specialist Certification from NASP of USA+ ISO 14001:2004 & 9000:2000 Certified Lead Auditor with 15 Years Experience in Oil&Gas as HSE Advisor/Engineer/Supervisor/Coordinator/

Wetland Studies, Wildlife Research, Environmental Assessment, Endangered Species Survey

I have: . Master's Degree in Geology . 4 years research experience . 2 years teaching experience . An impressive career of field works including mapping . Efficiency in sampling of rock and soil from outdoors . Extensive training and experience in laboratory.

Senior Structural Designer whom has been on both sides of construction. I started out on the tools and made my way into the design and engineering. Please review the letters of reference on my website. My background has always been an asset in the design office.

I have a 6 years diesel mechanic in kuwait and at present i am working in afghanistan as a Sr Wheel vehicle mechanic.

1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out