Resume - Dynamic, highly adaptive professional offering 20+ years’ experience.

Misco Jobs

Resume #86946

CONTACT INFORMATION:
View contact information...

SUMMARY
Dynamic, highly adaptive professional offering 20+ years' experience of manufacturing industrial & construction experience by a comprehensive 2D and 3D CADD education. An exemplary Senior CADD and Microstation operator completes the most stringent design challenges with speed, accuracy, and enthusiasm. Expertly interfaces with and communicates complex technical issues to all levels of personnel.
Proven expertise in: AutoCAD Release 12, 13, 14, 2000i, 2004-2006, Smart Plant Review, AUTOPLANT 3D-Structural, Microstation SE & J, Lite Frameworks (PDS), Additional usage of Revit, Graphic Data System (GDS), SKETCH, Raster Edit System Software and Soft Plan.
WORK HISTORY
JACOBS ENGINEERING / Eastern Design Services Charleston, S.C.
Structural Designer February 2007- April 2009
* 3D modeling of oil recovery facilities using modular assembly process.
* Plant layout and detailing.
* Layout and design / 3D modular pipe racks and equipment modules.
* Create 3D modular structures using Auto plant, Microstation & Smart Plant Review.
* Create 2D drawing packages, Isometric, plans, elevations, sections and details from 3D models.
* Update and design existing modular structural structures and supports from engineering mark-ups.
* Updating as-built drawings (concrete, mechanical, piping, civil and structural).
* Responsibilities include, structural steel design and Layout of various steel structures, equipment support, steel platforms, stairs, steel and concrete details as well as construction documents for
Modular and stick built construction.
Bechtel, Savannah River Site / ACTS, Inc., Aiken, SC
Structural / Mechanical Designer March 2006 – Feb. 2007
* Create conceptual and final design drawings of piping and structural supports.
* Update and design existing structural structures and supports from engineering mark-ups.
* Updating as-built drawings (electrical, mechanical, piping, civil and structural).
* Responsibilities include, but not limited to Structural Steel Design and Layout of various steel structures.
* Plant layout and detailing of pipe racks, fabricated stairs and ladders, reinforced concrete pads, rails, grading, detailing foundation and grid plans, steel beams, concrete sections, steel joists, metal decks, and supports.

Jackson Design Group / Aerotek Herndon, Va.
Architectural Layout Aug. 2005 – Feb. 2006
* Create architectural floor plans, sections, details and site plan drawings for residential and commercial construction.
* Create electrical and mechanical drawing, wiring and schematic diagram for underground utilities from engineering mark-ups.
* Creating contract sets for building permits
M.C. Dean, Building Intelligence/ Aerotek Herndon, Va.
Mechanical / Structural Designer June 2005 - Aug. 2005
* Create details and site plan drawings for wastewater treatment plants.
* Create electrical and mechanical drawing, wiring and schematic diagram for underground utilities from engineering mark-ups.
* Security equipment and conduit layout.
Jefferson Millwork & Design Sterling, Va.
Architectural Designer July 2004 – June 2005
* Layout and design all detailed drawings for client and architect.
* Create shop drawings to specifications.
* Order and submit samples for client approval.
* Responsible for ordering material for fabrication.
* Coordinate fabrication and installation of structure at job site.
Cocley Home Remodeling Washington, DC
Architectural Designer May 2003-May 2004
* Layout as-built and new design drawings for permits and construction in residential and commercial remodeling.
* Construct forms, align, straighten, plumb and square forms for installation.
* Measure and mark location for studs, leaders, and receptacle openings to determine conformance to specifications.
* Install rough door and window frames, sub-flooring, fixtures and temporary supports in structures undergoing construction and repair.

Tourgee & Associates, Inc. Owings Mills, MD
Architectural Designer Jan 2003-May 2003
* Detailing foundation and grid plans, steel beams, and concrete sections, steel joists, metal decks, and supports for commercial buildings.
* Layout and detailing aluminum steel rails, grading, stairs, and nosing
* Consultation and coordination with other design workers.
* Checked dimensions of materials to be used for sections and details.
Hayes, Seay, Mattern & Mattern, Inc Washington, DC
Structural Designer Sep 2000-Jan 2003
* Detailing foundation and grid plans, steel beams, concrete sections, steel joists, metal
* Decks, and supports
* Layout and detailing demolition plans.
* Consultation and coordination with other design workers and engineers
* Checked dimensions of materials to be used on each project

Delon Hampton & Associates, Silver Springs, MD
Structural Designer Mar 2000-Sept 2000
* Bridge and civil detailing
* Detailing foundation and grid plans, steel beams, concrete sections, steel joists, and metal.
* Decks, and supports
* Layout and detailing sections of steel and concrete connections.
* Consultation and coordination with other design workers and engineers.
Baltimore Gas & Electric Woodlawn, MD
Structural Designer July 1998-Mar 2000
* Detailing HVAC and Sprinkler layouts
* High voltage equipment layout and detail.
* Layout and detailing aluminum fabrication, reinforced concrete pads, rails, grading.
* High voltage racks for renovating of old and new sub-stations.
Niro Pharmaceutical / Tri-Serv, Inc Columbia, MD
Mechanical Designer Apr 1998-July 1998
* Pneumatics
* Piping and conduit layout for pharmaceutical equipment
CSA (Aerospace Division) Crofton, MD
Mechanical Designer Jan 1998-Apr 1998
* 3D Modeling
* Mechanical layout and packaging
* Rack and panel wiring assembly for military equipment
Structural Steel Fabrications, Inc Hanover, MD
Structural Designer 1997-1998
* Review rough sketches, drawings, specifications, and other data received from engineers.
* To ensure they conform to design concepts
* Draft plans and detailed drawings for structures, installations, and construction projects.
* Layout and set up the program of cuts and hole punch outs in steel and steel plates for shop fabrication.
Potomac Iron Works, Inc Baltimore, MD
Structural Designer 1995-1997
* Review rough sketches, drawings, specifications, and other data received from engineers.
* To ensure they conform to design concepts
* Draft plans and detailed drawings for structures, installations, and construction projects
* From architectural drawings.
* Layout and detailing for aluminum fabrication, rails, grading, stairs, and nosing.

Long Island Cable Productions Hicksville, NY
Designer/Detailer 1993-1995
* Electrical and mechanical drawing; wiring and schematic diagrams for underground utilities.
Pharmetic, Inc Long Island, NY
Designer/Detailer 1990-1993
* Mechanical layout and packaging on pharmaceutical equipment
* Pneumatics and space arrangement
Consultants & Designers, Inc Hanover, MD
Designer/Detailer 1979-1990
* Mechanical layout and packaging
* Electrical and mechanical drawing; wiring and schematic diagrams.
* Printed circuit board taping and layout.
* Detailing rack and panel wiring assembly.
* Detailing HVAC and Sprinkler layout.
* Layout of sewage systems, road, curb, tunnel, and bridge detailing.
* Layout/detailing transit railroad track and communications stations.

Education
* 1996 Catonsville Community College
* 1995 Island Drafting & Technical Institute
* 1992-1993 Career Computer Center
* 1991-1992 R.E.T.S.
* 1977-1979 New York Institute of Technology

References Available Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 301 to 350 of 1624)

Go to Search Parameters...

Brief Description

Sr. Geotechnical Engr, Design and Construction of Underground Structures, Mgmt of Multidisciplinary Projects, Numerical Modeling, Rock Mechanics, Ground Support Design, Tunnel Inspections, Hands-on Experience in Applying FLAC, FLAC3d, UDEC and 3DEC Codes in Design, Work Under NQA-1 Q A Program

I am currently a graduate student at the Univ. of Illinois at Urbana-Champaign in the Env. Engineering Dept. I seek a job that will give me the opportunity to explore the field of env. engineering. One in which I can be active both physically and mentally and that challenges me.

Three year working experince in field of hydrogeology and hydrochemistry.

I am a Chemical Engineer with Seven years of experience. My experience can be divided in to two main categories; industrial and consulting, on air and wastewater, treatment, operation and maintenance encompassing permit applications, work plans for regulatory compliance in the areas of Environment,

Hydraulic Design, Troubleshoot, Repair and Manufacture

Petroleum and Natural Gas Engineering, BSc Earth science, MS Candidate

Experience in pollution assessment, emission inventories / monitoring, characterisation of sources, exposure assessment, source testing, data collection & interpretation, emission estimates, regulatory analysis, engineering calculation, presentation and technical report writing.

ME (Environmetal Engineering), 4+ years in desing of waste water treatment units, design of under ground drainage network systems to cities.

Dynamic Assistant Professor of Environmental Engineering broadly experienced in contaminant transport modelling and pollution control in surface and groundwater. Physico-chemical, biological and electrochemical design of environmental control processes, hazardous waste management and treatment.

Iam a postgraduate in Environment Management worked with various petrochemicals, chemical, pharmaceutical, bulk drugs and Oil & Gas E&P industry for the past 8 years in various countries. My experience has been as an Environment Engineer; Environmental Specialist; QHSE Engineer and EMS staff in

Assistant Product Engineer " Wafer Probing ang responsible for Yield improvement "

Desktop technician

Diploma in Mechanical Engineering. (Good in Auto CAD Draughting and Designing)

Senior Weld Mgr / Engineer. I have for decades specialized in providing management support for the implementation of Best Weld Practices and the establishment of Weld Process Controls. I

I have 15 years of working experience with over 5 years in senior management positions with international companies in Asia.

Chillers Process Systems, Compressor Screw & Reciprocating & Centrifugal,Motor Starter,Cascade Refrigeration, Gas Compression,Ammonia Plants,Control Panel, PLC's, VFD's

PhD in enironment engineering

A talented land Surveyor who is able to deliver services in Cartography, photogrammetry, cadastral, mining and Geomatics work.

Technological Assessment and Management -environmental studies, transportation and energy production

Environmental Engineer with more than 7 years professional experience in water projects. Right now, she is acquiring her Masters Degree in Environmental Engineering Science, UNSW, Australia.

I have a BS in Chemical Engineering from Colorado State University. I am a recent graduate from the Environmental Science and Engineering department at Colorado School of Mines, where I completed graduate Master’s research and thesis work specializing in groundwater remediation.

A Graduate in Master of Technology (M.Tech) in Environmental Engineering and Management. having 8 years of experience in the areas of Environmental, Health and Safety Projects Management.

ITI fitter I have 6 years experience in mechanic field also i know lathe ,milling machine operations

Piping Designer PDS CAD

Dynamic, highly adaptive professional offering 20+ years’ experience.

Technical /Project Engineer

I have experience in control systems design, Motor control center design, Variable speed drives, PLC and SCADA programming, power distribution network design. C/C++ and MATLAB programming skills

Proficient in Microsoft Word and Microsoft Excel, Knowledge in Time and Motion Study and Quality Control, Good in communication and writing skills

Experiennced Environmental Scientist

OBJECTIVE A challenging position which provides opportunity to improve my skills as a Senior Process Engineer.

Machine and computer expert

Am adepoju Ademiposi gabriel by name just finished my NYSC,during my youth service i was a site supervisor of construction of Drainage,installation Motorized of Bole-hole in my plce of Primary assingment.

attached for Safety Officer designation

HSE Engineer-a good educated, skilled and experienced individual on construction, fire protection and safety operations aspects, attained from exposure in different industry, hard working individually and in team, friendly and outgoing, self-motivated and well- organized

I am diciplinarian, and had strong in interpersonal and comunication skill with experience in leading the group of fishermen to continous their bussiness improvement. I liked to work with the well planning and target oriented. I had a good knowledge of different social culture of indonesia.

Safety Engineer

Experienced with water/wastewater treatment technologies, Experience in designing reterofitting structures for highway bridges, Good knowledge of urban storm water hydrology and GIS software.

I would like to take this opportunity to present my employment credentials for your consideration, and I would welcome the opportunity to introduce myself to you at your earliest convenience

COMPUTER GEOLOGIST Databases, GIS & 3D Modelling Project & Quality Management

CFD (Computational Fluid Dynamics), Multiphase/Multi-component flows, Fluid Flows, FSI (Fluid Structure Interaction), ASI (Arbitrary Sliding Interfaces), Heat Transfer, Thermal engineering, Design/development, Combustion, Chemical/Reaction Kinetics and Chemical simulation, PhD, Mechanial Engineering

Looking for a challenging position in the field of Civil Engineering, Construction Utilities.

Total 7 years of industrial experience in the large manufacturing set-up/project, in the field of Environmental Management and Resource Conservation and Infrastructure Development projects planning, operation and monitoring.

Strong Academic and Labratory Skills in Geology. Management experience, 13+ years of work experience, Quick to learn, can work solo or in a group, ready and willing to learn anything new.

Sr. Field Engineer, 20+ years, excellent customer service skills, electro-mechanical repair, maintenance

Safety Trainer seeking entry level position with Safety minded company.

BE CIVIL, SPECILIZATION IN ENVIRONMENTAL, MDBA

Experienced Civil / Structural Engineer

Design, collaborative Industrial design, product development, rapid prototyping, surfacing, drafting, Pro/E, Solidworks, plastics, sheet metal, die cast, machining, weldments, tooling, GD&T, analysis, concepting, presentation, project management tools, materials sourcing, costing, vendor interface

I have completed my graduation in Computer Science. Have worked with Bell Canada as a Tech support Customer Representative. Right now working in a telecommunication Industry for Sony Ericsson as Software engineer.

29 years of Intergraph/Microstation, 9 years of AutoCad, 8 years of civil roadway design ,5 years InRoads, 4 years GeoPak, 3 years PDS/Frameworks, 2 years Bentley Structural TriForma

1 2 3 4 5 6 [ 7 ] 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out