Resume - NACE Corrosion Specialist, Chemical/Mechanical/Consultant , Corrosion Engineer

Misco Jobs

Resume #87453

CONTACT INFORMATION:
View contact information...

Summary

Global Corrosion Engineer/Chemical/Mechanical consultant manager, with 30 years of broad quality oversight for major process capital equipment, field mechanical integrity reports, DOT chemical shipping classification, electrochemical analyses and R& D process engineering compatibility issues. Working knowledge of API, ASME, and NACE engineering codes. Well trained in leading failure investigations, extending the life of chemical processes, establishing new purchasing engineering standards and eliminating the effects of costly corrosive agents thereby improving processes and savings millions of dollars. Experienced in dealing with hundreds of different corrosive liquids and gases.

* Saved Hercules $ 6.7 MM over 3 years through improvements in materials handling, rotating equipment design, and dryer construction changes.

* Saved $ 32 MM over the last 10 years through projects this extended the life of capital equipment, eliminating costly field process failures, and by improving product quality for both Colgate Palmolive and Hercules.

* Certified by NACE International &CESB as a Corrosion Specialist, Materials Selection Design Specialist and Sr. Corrosion Technologist.

Professional Experience

Sr. Staff Engineer at Hercules Inc. July 2006 – July 31, 2009 (3 years 1 month)

* Saved $ 1.2 MM through the alteration of materials handling of cutter blades which eliminated compound fretting fatigue. This project reduced the chance of catastrophic failure of a cutters by practically 100%

* Conducted failure analysis of critical processing mixer leading to redesign by engineering vendor eliminating blade tip fatigue and process shutdowns saving $ 2.0 MM.

* Led international team in the investigation of two failed coiled serpentine heat exchanger dryers to determine the root cause of the failures. Dimensional modifications were made to one dryer while the other needed an upgrade in materials of construction and welding procedures at a cost savings of $ 2.5 MM.

* Extended the life of critical Kymene reactors to allow for continued operation without replacement saving $ 1.0 MM.

* Revised corporate engineering standards to bring them up to date including, FRP composite construction, Coatings and Linings as well as revision of welding methodology specifications.

* Managed corrosion lab studies and interpreted compatibility parameters for R&D and field engineers.

* Crafted materials engineering specifications for sales organization.

Sr. Engineer Colgate Palmolive Co. November 1984 – November 2004

* New formulated super fatted soap dryers developed pitting corrosion after 3 years of service. A failure analysis and several plant inspections were conducted. Recommended higher throughput velocities and materials of construction upgrade from 316 SS to Al6XN saving $ 2 MM.

* Spray detergent towers around the globe were experiencing pernicious internal corrosion Made several trips to South America to internally inspect the towers. The towers were experiencing condensation corrosion at the explosion door level mid way up. Made recommendations to shore up tower with new internal fillet welded carbon steel plate and additional insulation to prevent continued condensation corrosion saving over $ 5 MM worldwide.

* Inspection of Glycerin recovery evaporators in Brazil revealed stress corrosion cracking after 5 years of service requiring a change in material of construction. Recommendation was made to change metallurgy to 2205 duplex alloy. The evaporators were repaired with this alloy with no further corrosion issues around the globe saving $ 7 MM

* High Speed Rotary valves in abrasive toothpaste formulas were experiencing erosion pitting corrosion around the world. Made recommendation to machine new valve out of Nitronic 60 alloy. This resolved the erosion issue and eliminated the chance for metal contamination in toothpaste saving $ 2 MM worldwide.

* Resolved a Dual laminate FRP tank failed in hypochlorite service in Europe. Moved away from lined FRP to cross-linked HDPE saving $ 1 MM.

* Led a global team of packaging engineers and scientists in resolving critical Soft-soap Pump Springs crevice corrosion by testing and reformulation eliminating the issue with a worldwide saving to the business of $ 10 MM.

* Developed an eight-hour informative Corrosion course on engineering materials and chemistry. An overview of significant company corrosion issues and solutions was given. It included sections on materials selection, engineering design, corrosion testing and a how to checklist for plant corrosion inspections.

* Developed a Materials Engineering corrosion database that was used extensively by engineers and the manufacturing plants to select materials of construction for Colgate Palmolive co. saving $ 5 MM worldwide.

FMC- Metallurgical Corrosion Engineer 1981-1984

Failure analysis of machine parts and corrosion studies for FMC that included fractography, metalography, and corrosion testing. Work centered on aluminum alloy selection for the Army fighting vehicles including the Bradley.

EDUCATION/PROFESSIONAL DEVELOPMENT

Wayne State University, Detroit, Michigan. BS Material Science& Engineering, Chemistry Minor. Completed numerous ASM and NACE professional development courses. Completed UCLA extension course on Electrochemistry and uses for corrosion testing. Failure Analysis courses were taken and completed through the Society of Professional Advancement. Participated in NACE annual corrosion society meetings and section meetings for over 25 years while obtaining all NACE certifications.

OBJECTIVE:
------------
Looking for a varied assignment corrosion engineering job. Looking after mechanical integrity, corrosion control, failure analysis, chemical inhibition and monitoring, project engineering work.
------------

ADDITIONAL INFORMATION:
------------
U.S. citizen, enjoy golf, swimming, traveling, and reading.
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 1624)

Go to Search Parameters...

Brief Description

I am a Chemical Engineer, with Masters Degree in Environmental Science. My employment history includes process engineer experience at aluminium smelter, and at pulp/paper mill. I have also worked for an environmental consultancy, and for a company developing environmental technologies.

An environmental engineering professional with 17 years of experience in the public and private sectors. Expertise in regulatory compliance and policy-making for environmental concerns. An excellent business and personnel manager who demonstrates superior communications skills.

Highly skilled Quality Control and Research & Development Lab Technician

SYSTEM ADMINISTRATION

Provide structural engineering, construction management, real estate due diligence and expert witness services.

chemical and process engineer with mining and environmental experience

NUCLEAR SAFETY ENGINEER / NEBOSH INTERNATIONAL

Water Resources Hydrologist and Civil Construction speacialist

Over 20 Years work experience in the Water & Wastewater Field Associates Degree in Environmental Engineering Technology Water & Wastewater Certifications 11+ Years work experience Overseas Additional work experience in: Training, Logistics, and Materials Purchasing

OBJECTIVE To be employed as a licensed professional engineer responsible for project management of environmental, water and wastewater, and/or water resources programs.

Environmental, Health and Safety engineer with over 14 years experience. B.S. in Environmental Biology from Cal Poly S.L.O. M.S. in EHS management from Denver University.

I am looking for a job In Process/Sales/Servcie/Proposals/Opearation in water treatment field.

Strong experience in regulatory compliance and inspections with knowledge in wastewater, air quality, and hazardous waste management

M.Tech with 3 years of experience in Telecom technologies like UMTS, GSM

working as csu saferty officer in sabic,I am having Industrial safety diploma from annamalai university.chennai

Sub officer trg from NFSC Nagpur,Garduateshipinfireengineering from IFE (U.K), M.I fire from IFE (UK), Diploma In industrial safety from annamalai University India, MSc environment from Sikkim manipal University Of technological sciences. 13 years experience in Gasplants, petrochemicals, fertilizer

Environment & Machine Control with experience integrating PLC's, HMI's, VFD's, Networks and Radio.

A GIS/CAD specialist with 20 years experience in the field of business, urban planning, and GIS

Health and Safety Auditor

Pursuin M.com Privious Year,Completed Comnet Certified Hardware & networking Experts,Working in Project management

Geologist/Hydrogeologist, 18 years experience, environmental, sedimentary and glacial bedrock and soil deposits, 3-dimensional characterization of fracture zones in bedrock, LNAPL and DNAPL migration pathway analysis.

I have over five years in the environmental consulting field, specializing in drinking water and wastewater. I am currently working part-time while I pursue a M.Sc. in Water Resources Engineering at the University of Guelph in Guelph, Ontario.

Designer/Drafter with Inventor experience.

BMS Project & AMS Manager with 9 Yrs. Experience

A research and development position or QC/QA/synthetic position in the pharmaceutical/chemical industry that takes advantage of extensive experience in synthetic/analytical chemistry

I possess a BSc. Degree in Chemical Engineering and post grade studies in Health and Safety Engineering Specialist. I worked 16 years as Industrial Hygienist and Health and Safety Specialist at the Venezuelan Oil Industry (PDVSA).

Water/wastewater treatment engineering study, design, modeling, operation optimization for municipalities,oil &gas, refinery,power and petrochemical plants.

- Highly educated professional (Ph.D. and M.Sc. in Environmental Geosciences) - Managed portfolio of several environmental projects (NSERC, DIAND, CIDA, ICEF) - Seven years of professional experience in characterization, assessment and monitoring of contaminated sites

Civil engineer with surveying, mining, and GIS experience

Material Controller with over 12 years of relevant experience in major international oil and gas companies. Have deep knowledge of supply chain principles and procedures. Familiar with most of material controlling systems and softwares. Strong knowledge of almost all types of construction, fabri

B.E Mechanical with 6 years of experience in design field using ProE

Well Qualified, Skilled & Experienced proffer in Design, Consultancy, R&D in Civil, Structural, Geotechnical, Architectural and Industrial Engineering

nior Software Engineer, Ascendum Solutions Pvt Ltd, Bangalore, India Dec 2007 - Present * Member of the ATG development team in the educational software development

Environmental Coordinator, experienced in: annual reporting, auditing, Title V permiting, SWPPP, SPCC, environmental program development, environmental training development, and project managment.

To work for a company in the environmental field that allows professional and personal growth.

Utility Process Engineer

I have a Bachelor degree in Agriculture and irrigation sciences and some related experiences in some companies.I would love to work with more companies here and gain experiences.No matter what sort of job but related to water. Thanks

Water wastewater business development

Mechanical Engineering Graduate with seven (7) years experience in supervision of the operation and maintenance of furnace, compressors, cranes, pumps, boilers, expellers, oil heaters, water supply and water treatment. Four (4) years experience as Maintenance Supervisor in a 62-hectare Prawn Farm

outdoor field technician

A detailed, oriented, dependable and organized individual with progressive responsibilities within the Environmental, Health and Safety Field with Hand- on Field and Laboratory Experiences. Resourceful in achieving tasks accurately, timely and neatly. Enjoys accepting and handling new challenges.

repairing,overhaulilng,diagnosing,servicing and troubleshooting of heavy duty machines,and other equipment.

Registered Professional Engineer with 13 years experience in mineral processing and extractive metallurgy. Holder of a B.S. in Metallurgical Engineering and a M.S. in Environmental Science.

Team oriented, love to work in highly motivated teams,Good communication skills ,In-depth understanding of special knowledge in the field of Applied catalysis of Physical chemistry,Skilled in using all kinds of experimental installation, good practical ability,Familiar with many softwares.

1. Site engineer, Hyperion Development Ltd. 2.Sub asst. Engineer,Public works department, 3. Jr. asst. manager,Power Grid Company of Bangladesh

Skills in performing safety inspections and ensuring compliance with OSHA safety standards. Excellent ability to develop, implement, and enforce safety programs and protocols. Strong ability to gather data, compile information, and prepare reports.

More than 15 yrs of professional work experience as WATER RESOURCES ENGR/HYDROGEOLOGIST/WELL DRILLING SPECIALIST gained from four (4) local & with international affiliation consulting cos., mostly ISO 9001:2000 certified, & a gov't. agency from year 1988 to 2004 in the Philippines.

over 12 years in the HSE field. B.S. degree in environmental engineering, M.S. degre in Quality Assurance. Experience including hazardous materials (asbestos, lead, etc.) management, inspections, monitoring, report writing, compliance, and training. Attended many HSE workships and training.

NACE Corrosion Specialist, Chemical/Mechanical/Consultant , Corrosion Engineer

A dynamic, Mechanical Design/Process Engineer offering over 20 years of outstanding experience in Machine/Tool Design and Project Management. Successful problem solving skills with the talent to transform complex design criteria into simple design solutions.

1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out