Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #87958 next resume »»
CONTACT INFORMATION:
View contact information...

PG, CPG

Introduction

Experienced geoscientist desires senior geologist or supervisor level position with team oriented, active and successful oil & gas company. Experienced in all aspects of hydrocarbon exploration and production. Extensive history of exploration in the Appalachian, Gulf Coast, Anadarko and Gulf of Mexico basins areas. Recent experience ranges from detailed development geology in historical producing trends of the Appalachian Basin to exploration and delineation of the Marcellus Shale in Pennsylvania and West Virginia.

Skills/Experience
Gas Shales Field Mapping 2D/3D Seismic Interpretation
Tight Sands Reservoir Maps Prospect Sales
Overpressured Reservoirs Attribute Mapping Joint Ventures
Conventional Reservoirs Play Definition Wellsite Operations
Stratigraphic Analysis Prospect Development Microsoft Software
Sequence Stratigraphy Resource Plays SMT
Facies Analysis Log Correlation Geographix
Seismic Stratigraphy Wildcat Programs Technical Writing
OCS Lease Sales Development Drilling Core Description
Seal Analysis Trapping Configurations

Work History

Chesapeake Appalachia, LLC
Senior Geologist – Eastern Division 2008 – 6/2009
* Southwest District geologist responsible for development activities in eastern Kentucky, Virginia, northeastern Tennessee and southern West Virginia.
* Principal geologist for tight gas sand and Devonian gas shales developments.
* Provided direction for horizontal Lower Huron Shale, Berea Sand and Weir Sand drilling programs.
* Supervised geological programs for CHK Southeast and Southwest Districts as assistant to the Exploration Manager.

Cabot Oil & Gas Corporation
Senior Geologist – Eastern Division 2002 – 2008
* Lead geologist for Marcellus exploration and development programs in Pennsylvania.
* Planned 120 well development program for Cabot's Marcellus activity area in Susquehanna and Wayne Counties, Pennsylvania.
* Led Cabot's Glasgow and Danville District E & P efforts in the Appalachian Basin of West Virginia.
* Developed and managed 70+ well development program in 2006.
* Developed and managed 90+ well development program for 2007.
* Produced detailed 5-yr. development plans.
* Identified thousands of acres of "lost" leases through district-wide lease reviews.
* Maintained district reserve (PUDs & PRBs) and drilling location maps.

Lead Geologist – Gulf Coast Division 1999 - 2002
Developed exploration opportunities and screened prospect submittals for Cabot's early Gulf Coast and Gulf of Mexico expansion efforts.
* Elevated Lake Pelto (South Louisiana) property to best 100% ownership producing property in company through the drilling of 2 major wildcat wells and 2 development wells in 2000 & 2001.
* Screened in excess of 100 submittals for E & P opportunities.
* Interpreted 2D & 3D seismic data in state waters and OCS areas of coastal Texas and Louisiana.
* Provided Gulf of Mexico expertise to management for development of exploration strategy.

Senior Geologist – Eastern Division 1997 - 1999
* Led Cabot's Oriskany tight sand exploration efforts and southern Appalachian new ventures program. Matured 60 prospect Oriskany exploration program inventory in PA and WV.
* Managed development in Cabot's Glasgow and Clarksburg Districts.

L. Robert Kimball & Associates, Inc.
Project Manager 1992 – 1997
Project Manager for leading Northeastern US engineering firm. Lead technical writer and proposal writer. Interacted at the project management level with state and federal regulatory agencies.
* Wrote project winning, multi-million dollar proposals.
* Developed goals and budgets for awarded projects.
* Implemented and managed complex environmental remediation projects.
* Primary contact with federal, state and local agencies on a variety of engineering, regulatory and environmental projects.

SOHIO/BP Exploration
Staff Geologist 1991 - 1992
Group Leader and Staff Geologist for development of exploration strategies and technical evaluation methods for Gulf of Mexico Flexure Trend, Sub-Salt and Deep Water Plays.
* Evaluated regional seismic data sets using sequence-stratigraphic and seismic-stratigraphic concepts.
* Prioritized Gulf of Mexico exploration areas.
* Recommended acquisition candidates based upon multi-parameter analyses.

Anadarko Geoscience Supervisor 1989 - 1991
Geoscience Supervisor for Anadarko Basin exploration and development program.
* Supervised 12 member team comprised of geologists, geophysicists, petrophysicists and technicians.
* Team efforts resulted in 3 major, deep gas (Morrow and Redfork) discoveries.
* Provided oversight for multimillion dollar budget(s).
* Performed staff evaluations and performance reviews.

Offshore District Geologist 1986 - 1989
Coordinated offshore exploration programs in the GOM Flexure Trend and deep water areas.
* Geoscience supervisor for 9 offshore lease sales.
* Supervised geological evaluations that resulted in the leasing of 160 blocks and the discovery of in excess of 500MMBOE
* Worked with Offshore Exploration Manager to develop yearly goals and budgets.
* Conducted annual performance reviews and recommended compensation awards.
* Developed presentations for quarterly and annual corporate management meetings.
*

Offshore Area Geologist 1984 - 1986
Supervised Eastern Louisiana Offshore geological exploration team. Responsible for Flexure Trend regional investigations to identify salt-withdrawal basins and depositional pathways for shelf-edge and deep water sediments.
* Supervised team of 5 geologists.
* Assisted Offshore Exploration Manager in lease sale strategy and drilling program development.
* Supervised post-sale drilling program development and implementation.
* Solo geological evaluations led to the leasing of 15 blocks in OCS Sale 72.

Additional Work History
Division Geologist, OMNI Exploration, Inc. 1982 – 1984
(Lower 48 US )

Advanced Geologist, Marathon Oil Corp. 1980 – 1982
(South Texas deep Wilcox trend; Offshore GOM)

Senior Geologist, Consolidated Gas Supply Corporation (WV) 1977 – 1980
(Appalachian Basin)

Geologist I through IV, Mobil Oil Corp. 1974 – 1977
(Offshore GOM; Gulf Coast Basins)

Education
* Master of Arts in Geology, Indiana University, 1974
* Bachelor of Science in Earth Science – Geology Option, U. of Pittsburgh, 1972

Licenses & Certificates
* Registered Professional Geologist in Texas, Tennessee, Pennsylvania & Wyoming
* AAPG-DPA Certified Petroleum Geologist #3863

Software Experience
* Geographix
* SMT/Kingdom
* Microsoft Word, Excel & PowerPoint

Publications
Hirsch, S., and Perry, G., Using a Unique High-Resolution Imaging Process to Find Pay, World Oil, March 2002, p. 57

View contact information...
«« previous resume next resume »»
Search Results (Resumes 401 to 450 of 1619)Go to Search Parameters...
Brief Description
An Environmental Engineer with Water Resources/Geological Engineering background. He also has four years of experience in a Gold Mine as a Geologist.
Civil Engineer, Civil maritime engineer
Computer ?Automation & Controls Engineer
Bachelors degree in Chemistry and Geology, approximately 13 years experience in site investigation and remediation, most recently as project manager. Last 3 years in USA, previously overseas. Permanent resident wiht green card.
I have a MS and BS in Environmental Engineering with just under 1 year experience as engineering consultant. I am looking for a career related to energy supply, generation, and distribution.
I am a talented and hard-working individual, committed to the environment, seeking to gain experience in environmental research.
Risk Assessment Studies, Safety and Environmental Audits, Environmental Management Plans, Environmental Impact Assessment Studies, Basic & Detailed Design and Engineering of Effluent Treatment Plants & Sewage Treatment Plants
Posses the ability to develop conceptual and or final mechanical designs, plot plans & equipment arrangements working from P&ID’s or PFD’s. Prepare complete detailed design drawings from P&ID’s, edit specifications and review/markup construction shop drawings for many industries
14 Years of Technical and Service Industry Experience as a Staff and Consulting Engineer within the Environmental, Health & Safety Field.
4 Years experience in networking field.Looking for a networking job
As a senior Mechanical Engineer, has over 10 years experience in the engineering industry, mainly in the water cycle, mining and minerals processing practice sector. He has expertise in fluid mechanics practice area, especially in Water and Alumina processing.
Metallurgical engineer with diploma in mechanical engg. and graduate's diploma in computer application
14 yrs, in Refinery & Petrochem. Develop& management of cost-effective EHS Programs, Implementation of EMS, Wastewater Treatment, Hazardous Waste, Air Pollution Control Tech., prevention/minimization& recycle/reuse, Knowledge of national and international environmental regulations.
I am chemical engineer with 14 years experieced in corrsion inthe industrial water treatment, process units, coating, cathodic protection, and chemical injection.
Seeking Project Engineer or Sr Process Engineer position worldwide based out of Houston Texas
Outstanding Engineer
Groundwater sampling, indoor air, GIS, groundwater/contaminant transport modeling
Environmental Engineer looking for a full-time engineering position in the field of environmental, transportation or civil engineering, nationwide, willing to travel, will consider other engineering disciplines if training is available. Prefers jobs in a big metropolitan area, 2 weeks notice needed.
Highly motivated, team-oriented individual with excellent communication skills. Two years of industry experience with Turner Construction-USA & NESPAK-Pakistan respectively. Prepared budget reports, schedules, estimates and bill of quantities and performed engineering supervision of various trades.
At the present time I am working as an Environmental Engineer within the Semiconductor field. I manage the companies Hazardous Waste Management program and teach numerous health and safety training classes globally.
To obtain a civil/environmental engineering position with the opportunity for promotion to project management
Environmental Scientist, with experience in Water Quality. Willing to train for any position. Willing to travel Worldwide.
Sr. Lead Piping Designer, AutoCAD, AutoPlant, PDMS, MicroStation, 3D
Product Distribution / Customer Field Support / Product Design-in / Market Development / Data & Market Analysis / Disti support / Market material writing / Public presenting / OEM Relationships / Product Presentations / Technical Analysis / Technical writing/translating
Working HSE Engineer with 7 years of experience and 2 years in Oil and Gas field in UAE
Fifteen years experience in the oil and gas industry. Five years overseas work experience in Libya and Indonesia. Experience working on onshore and offshore projects. Experience with a variety of equipment including centrifugal pumps, gas compressors, pressure vessels, piping.
Project Manager / Engineer, Private & Public Sector Experienced
Obtain experience on Environmental Design and Environmental Health focused in Soil, Water and Air Quality Management and/or remediation.
Seeking a position in environmental engineering utilizing knowledge, skills and experience in water and wastewater treatment and design and waste management.
I'm a masters student in the department of Environmental Engineering, University of Missouri - Rolla, USA . I will be graduating in august 2004 and looking for an entry level environmental position. My resume give additional information regarding my background
seeking a position in the construction ,design and research field preferable in Water Resources projects in order to have more experience and to work globally, to be able to apply my professional interest in the field of Water Resources and Environmental Engineering.
Position as Electro-Mechanical Designer. Open to full-time regular employment or long-term contract arrangement. Extensive experience on CADAM, CADRA and CatiaV4. Also experience with CADEX-CCD and AutoCAD 3-D Solid Modeling. Over 25 years experience.
Wastewater treatment, waste management, EIA
I am a geoscientist with a strong technical background with seismic processing, interpretation and analysis experience. Also experienced in shallow geophysics, field sampling, and monitor well installation for environmental projects.
I am an Diploma Engg. in Electronics & Telecommunication and right now i am working in reliance comm.Ltd. as a Transmission engg.
Supervisor, Quality, Process, wastewater
A multilingual and experienced GIS (Geographic Information Systems) and hydrography professional
Environmental Post Graduate
I am a well rounded geologist and am excited about applying my skills, as well as learn new ones, to the benefit of myself and my company. My MS is in structure and mineralogy from UNC Chapel Hill and my BS from SUNY Binghamton in geology with a concentration in geophysics as well as geomorphology.
I am a civil engineer with an MBA degree from Rollins College, Orlando, FL. I have work experience in geotechnical and transportation engineering. Now, i am looking for a job in geo environmental engineering throughout the world.
Civil Engineer with 4 and a half years experience in wastewater modelling and design.
To obtain a full time position in the field of Environmental Engineering where I can get an opportunity to prove myself by implementing my potentials in the company interests.
I'm M.Tech In Mineral Engineering and B.Tech in Chemical Engineering candidate with 6 year experience in technical sales and service. I've a concrete experience in the field of Coal Preparation, Iron Ore Washing, Phosphate and Alumina Industry from Indian Industries.
Chemical Engineer with 5 years Experience
I am a highly motivated, quick learner and hard working person. Who has no problem to work in team. I believe in proving my best in whatever responsibility that is entrusted to me and I make sure that my work is completed in very professional manner
Hydrocarbon Exploration and Development
I am working as a Safety Relief System Design Engineer at Dupont Nylon-Victoria Plant. The responsibilities include relief device sizing, preparation of safety procedures and maintenance of safety documentation, performing risk analyses, Hazop studies, and process safety estimation of projects.
I am interested in pursuing a career in conservation and GIS. As I have acquired various skills and valuable experience throughout my academic and work career, I feel I have much to offer you. I enclose my resume as a first step in exploring the possibilities of employment with your company.
Recent college graduate seeking a career in environmental engineering in a Latin country where I can learn to speak Spanish fluently. I have experience with environmental phase assessments and geotechnical related work. Please see my resume for further information.
PhD in chemical engineering. Expert in nanoparticle synthesis, surface modification, dispersion in polymer melts seeking research and development position in Richmond, Virginia.
1   2   3   4   5   6   7   8   [ 9 ]   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33  
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com