Resume - Experienced & Seasoned Engineer

Misco Jobs

Resume #88390

CONTACT INFORMATION:
View contact information...

PROFILE

Seasoned engineer with supplier development, project management, manufacturing, and design & development experience.

United States citizen & Canadian permanent resident.

PROFESSIONAL EXPERIENCE

BALLARD POWER SYSTEMS, Burnaby, BC 2007 – 2009
Supplier Development Engineer (2008 – 2009)
* Ensured that suppliers met technical, capability and quality requirements through the Pre-Production Approval Process (PPAP) and were in line with product cost targets.
* Researched and evaluated potential suppliers with respect to ability to execute against Ballard's long-term strategic plan.
* Assessed product feasibility and quality for the automotive fuel cell stack (MK1100), Bus program (HD6) and Back-Up Power programs (1020 ACS & 1300).

Manufacturing Engineer (2007 – 2008)
* Developed hydrogen fuel cell assembly processes for the MK1100 program. Past process had no flow and had a lot of waste in the system. The MK1100 fuel cell is the lead automotive program for Ford Motor Company and Daimler Corporation.
* Drove variability out of the finished stack assembly by implementing process changes and/or recommending product design changes.
* Investigated root causes behind any out-of-specification conditions and implemented corrective actions.

FORD MOTOR COMPANY, Dearborn, MI, USA 2001 – 2007
Manufacturing Engineer, Vehicle Operations
* Acted as Systems Engineer for Body Shop sheet metal on the 2008 Ford Taurus / Ford Taurus X / Mercury Sable at the Chicago Assembly Plant. Worked with Ford Stamping, Ford vendors and Ford body launch teams to ensure a quality product. Ensured that all "A" surface sheet metal was free from dents, dings and that specified margin and flushness requirements were met.
* Launched the Ford Focus (3dr/4dr/5dr/Wagon) underbody tooling at Wayne Assembly Plant for the 2006 Consolidation program. Reduced total cost by approx $1.5 million USD by eliminating non-essential program content. Increased line rate in the rear ladder line from 62 net to approx 70 net jobs per hour (JPH).
* Launched the Lincoln LS closure manufacturing and closure install tooling at Wixom Assembly Plant for the 2003 refreshening program. Ensured that all "A" surface sheet metal standards were met and eliminated overhead cost by 2 heads per shift.
* Provided simultaneous engineering, manufacturing direction, and assembly feasibility to ensure product / process compatibility from the early stages of development through the launch process. Delivered capable processes and tools for body shop operations.
* Assisted in establishing and delivering program investment, variable cost, and weight, quality and capacity targets.
* Took a leadership role in resolving assembly related concerns for respective area of responsibility.
* Supported variability reduction and lean manufacturing initiatives and incorporated global manufacturing strategies and best common assembly practices.
* Managed the design, development, installation and launch of body assembly tooling. Worked as a team with Ford manufacturing & design engineers, Ford assembly plant and tool vendor personal to make each program a successful launch.

TELEFLEX AUTOMOTIVE, Troy, MI, USA 2000 - 2001
Applications Engineer
* Led the design and development of the Accelerator & Cruise Control systems for Ford Motor Company.
* Managed all Ranger, Explorer, and F-53 Stripped Chassis programs.
* Met with Ford engineers on a daily basis to discuss and resolve new, current or past program issues.
* Reported issue status and resolution to Ford and Teleflex engineering, purchasing, and manufacturing operations.

YAZAKI NORTH AMERICA, Canton, MI, USA 1996 - 2000
Mechanical Design Engineer
* Led the design and development of Instrument Clusters for the Toyota and Mitsubishi North American markets.
* Worked with OEM customers, Yazaki Corporation-Japan office, North American suppliers and Yazaki manufacturing team during product development.
* Traveled to Yazaki's Mexican manufacturing operations to ensure a quality launch of each product that I was involved in.

CARRON & COMPANY, Contracted to Ford Motor Company, Dearborn, MI, USA 1995 - 1996
Design Aid Coordinator
* Chaired and coordinated the 1999 Expedition/Navigator Design Aid meetings.
* Coordinated installation of latest level prototype parts on design aid bucks for packaging analysis.
* Reported complex problems with underhood packaging to Design Engineers.

Weight Analyst
* Analyzed total weight of 1999 light truck subsystems to ensure that US government emission standards were met.
* Tracked and recorded weights of steering, suspension, wheels/tires, and interior components.

GENERAL MOTORS CORPORATION Pontiac, MI, USA Summer 1994
Engineering Intern
* Worked with Product and Container Engineers to develop sheet metal racks.
* Developed and delivered quote packages for sheet metal container assemblies to vendors.
* Traveled to various plants and suppliers to inspect and analyze body part containers.
* Followed up with suppliers on body panel rack tooling.

EDUCATION & PROFESSIONAL DEVELOPMENT

Bachelor of Science – Industrial Engineering Technology 1995
Central Michigan University, Mt Pleasant, MI, USA

Six Sigma Greenbelt / Process Control Methods / Failure Mode and Effects Analysis (FMEA) / Systems Engineering Fundamentals / Global 8D / Experimental Design /
Manufacturing Reliability / Applied Consumer Focus / CM4D / GD&T

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 901 to 950 of 1597)

Go to Search Parameters...

Brief Description

Project Management / Production Control

B.E.(ECE) in College of Engineering, Guindy, Anna University, Chennai having experiences in working in Integrated Systems Laboratory (Anna Univ) on various projects and interested in taking up a career in Analog VLSI Design

im a hard worker and want to learn and server the company. im willing to relocate and travel anywhere in the world

A self-directed, high organized individual who is able to easily identify and achieve priorities. Significant broad based experience in the areas of facilities planning, production, engineering, maintenance, environmental, staffing, and safety. Excellent communication and technical report writing

Assisant professor, PhD environmental biotechnology, expert in biological treatment of hazardous contaminants.

I have experience with SCADA system using Citect and RSView (Allen Bradley) as Man Machine Interface (MMI) and control system such as Allen Bradley PLC5, SLC500, ControlLogix, SimaticS5 and SimaticS7.

Zinc and Lead Smelter Plants Metallurgical Engineer with experince in operations, consultancy & Project Execution & Management

Seeking an opportunity in the oil and gas industry to develop and utilize expertise in electrical/electronics, control, instrumentation and/or automation as a new entry or trainee engineer.

Looking for management position in mineral (gold and precious metals) exploration and environmental engineering consulting.

I graduated in July 2006 with a BE Honours Degree in Manufacturing Engineering. I have over two years’ experience as a Process/Project engineer in a multinational company. I have completed courses on DOE & PDA and Project Management. Proficiency with Microsoft Word, Excel, PowerPoint, AutoCAD,etc

BE,MBA graduage having 13+ years experience in Sales & Marketing of Engineering, Flow Control & Instrumentation Process Products

i have complited a MSc degree from pune univeristy,worked as a geologist in geotechnical field,wel known to GPS ( Trimble Geoexplorer 3 )

M.Sc. Environmental Engineering and B.Sc. Civil Engineering holder seeking more experience. Although I do not have long working experience, I assure you that I am a keen learner and will work hard for the department if I am selected.

Mechanical Engineer, Pro-E, Pro/Intralink, ECM System

Licensed professional engineer with multi-million dollar construction projects experience. Fully trilingual - fluent in English, Spanish & French. Highly proficient with AutoCAD, GIS, SewerCAD, MS Project, Primavera and Microsoft Office.

Professional EHS Manager

Fresher Skills : C,C++,Visual Basic, Java

Project Manager/Construction Supervisor/Contracts Manager/Claims Manager/Cost Engineer/Construction Manager/Site Supervisor/Civil Engineer/Quantity Surveyor etc.,

I'm a recent graduate in Metallurgical Engineering and have an extensive Internship experience in the Oil and Gas Industry.

Excellent experience, coupled with a strong quantitative and analytical background, makes me an excellent candidate

Controls I&C Engineer

Electronics/Instrumentation Technician Specialist

Consultant, Project Management, Mechanical, Marine Engineering, HSE and Quality.

Project Controls Cost Engineer / Analyst (EVMS, Change Management, Cost Forecasting Planning and Budgeting)

Geologist with good expertise in planning, follow-up and reporting of geotechnical and geophysical site-/soil-investigations.

To contribute strong background in project management, civil engineering, contracts and along with unique drive for excellence and success to your firm in a Planning & Control Engineer position.

Civil engineer having knowlegde and working exposure of AutoCad 2000 and Staad 2004

Junior geologist with some prior experience in both exploration and mining. Skills include mapping, core loging, sampling, 3D modeling (Gemcom), statistical evaluation, grade control and reconciliation. Strong communication skills. Available immediately.

Construction Project Manager, Property Development Manager

Olympic Ice Skating Rink, Muliti-storey, Apartments, Precast Panels, Site Retention, Post Tensioned slabs, Structural Steel,

To obtain a challenging position that utilizes proven experience and skills.

Excellent interpersonal, oral and written communication skills, Good computer skills (MS-Word, MS-Excel, MS-Power Point, MS-Access, Oracle etc.). Excellent knowledge and Training on ISO 9001, ISO 14001, OSHA and OHSAS 18001. Master degree, Diploma in Safety, Training on HSE.

I have completed B.E,(Electrical & Electronics Engg) in may 2006 with 70% as the aggregate from Anna University(Kamban engg College) India.Having 2 years experience in transformer manufacture, Being given to understand that you are entertaining candidates for various positions

Over 15 years in Fuels Distribution, Storage and Transfer / Commercial Truck driver

A highly experienced Sr. Chemist with postgraduate qualification in Analytical Chemistry from AMU Aligarh University, India. Possessing 14 years of experience in operation and management of environmental protection, power and desalination plant and R&D laboratories. Expert in analytical technique

Well qualified Tunnelling professional with broad experience in several technical key areas like microtunneling,dewatering,piling and CCTV sewerage inspection includes management,administration and team building skills in Project Management, troubleshooting, execution in Infrastructure industry.

laboratory, mechanical, electrical, computer, supervisory and leadership skils

Civil Engineering graduate with over 16yrs of experience in Civil Works (12yrs in Middle East) with a versatile potential to utilize & develop the vast experience gathered in the field of pipelines & infrastructures, dedicated to contribute the best efforts for growth of the company.

I have 10 years experience in instrumentation and control field. I have designed, installed, tested, calibrated, start up, commissioned, maintained and repaired industrial electrical and instrumentation control systems and skilled in PLC, DCS, Programmable drive based control systems.

I have 10 total years in the environmental field ranging from conducting historical research on irrigation and water use in 17th and 18th century New Mexico to conducting site investigation field activities, including soil and ground water sampling and monitoring well installation, conducting enviro

Over 15 years of engineering and project management experience in commercial and industrial construction. Demonstrated ability to manage a diverse array of projects, including hospitals, stadiums, FAA airport projects, casinos, biopharmaceutical, and semiconductor facilities.

Strategic thinking Executive leading environmental, health and safety area. Recognized for assessing environmental, health and safety protocol, formulating and implementing highly effective policies, procedures and training to meet compliance, minimize injuries & reduce worker’s compensation claims.

Qualifications: B.E (Mechanical). Graduated with second class, first division honors. Have an MEP consulting background with over 2 years experience. Advanced in: AutoCAD, Solid Works, Excel, Visual Basic programming, Word, TRACE heatload and Matlab programming.

Experienced Mechanical supervisor with over thirty years spent employed in the middle east.

GSM/CDMA Project Manager

Experienced & Seasoned Engineer

Recent Geology Graduate with experience in geologic mapping, interpretation, and analysis.

Mechanical Engineer with experience in Oil, Gas and Industrial air filtration to meet ISA standards

Experienced Engineer, Diverse Background, Mining, Environmental

water and waste water power plant, steam, laboratory, analysis chemical chemist

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 [ 19 ] 20 21 22 23 24 25 26 27 28 29 30 31 32

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out