Resume - INSTRUMENTATION ENGINEER

Misco Jobs

Resume #88434

CONTACT INFORMATION:
View contact information...

OBJECTIVE
To work in a dynamic and challenging job environment where I will be able to significantly contribute to the organization's requirements while continuously enhancing my skill-set.

EDUCATION

Graduation
* B.Tech in Applied Electronics & Instrumentation from LBS Institute of Science and Technology, University of Kerala with first Class (66.6%) in 2008
Higher Secondary
* Completed Higher Secondary in 2004, Board of Public Examinations,
Government of Kerala (71.3 %) with first class from Govt. Cotton Hills G.H.S.S
Schooling
* Completed SSLC in 2002, Board of Public Examinations,
Government of Kerala. (89%) with distinction from Govt. Cotton Hills G.H.S.S

Software Proficiency:
C++, C#.net, AutoCAD 2007

Experience:

Presently working as Instrumentation Engineer in a petrochemical consultancy
(Petrocil Engineers and Consultancy), Sasthamangalam, Trivandrum, Kerala.
(From 01/10/2008 -presently).

E-mail id - supriya.sr@petrocil.com

Responsibilities of job:
Preparation of the following Instrumentation drawings/documents:
* Technical Instrument Datasheets.
* Instrument Index/Schedules.
* Cable Sizing Calculations.
* Equipment layouts.
* Instrument Cable routing/tray layouts.
* Instrument Cable schedule.
* Block diagrams of Instruments.
* Instrument Hookup drawings.
* Instrument Loop and Logic diagrams.
* Wiring/schematic, Interconnection diagram, termination details.

Academic Mini project
Linear Angular Frequency Meter (LAFM):

Linear angular frequency meter is a device which accurately determines the frequency of input signal. With the help of selection mode it can distinguishes between linear and angular input. We just press the start button for frequency display. The device computes the number of pulses in 1 second, which it is implemented using microcontroller AT89C51. It is a low power, high performance CMOS 8-bit microcontroller with 4k bytes of Flash Programmable and erasable read only memory. In this product micro controller is used as a counter. i.e. to count the number of pulses at the output either optocoupler module or squaring circuit. Optocoupler is used for the measurement of angular frequency. It consist of LED and phototransistor in a module, we get the pluses as output.
The device can be effectively used in areas which require accurate frequency determination.

Academic Main project
Design of RS485 Tran receiver Protocol Controller:

To obtain a design of RS 485 Transreceiver protocol controller using VHDL. RS 485 is the communication standard defined by EIA. The RS 485 standard permits a balanced transmission line to be shared in multi drop mode. Maximum of 32 driver/receiver pairs can share a multidrop network.EIA-485 is an OSI model physical layer electrical specification of a two wire, half duplex multi point connection.
In our project there are mainly three major blocks: Transmitter, receiver and a baud rate generator. The baud rate generator is the crucial block that provides the proper clock for the transmitter and receiver for proper synchronization and working, for proper functioning, the synchronization between the transmitter and receiver is necessary. The function of baudrate generator is to generate local clock signal.
We have undertaken here to obtain a simple model of RS 485 Trasreceiver protocol controller using VHDL; it stands for VHSIC (Very High Speed Integrated Circuit) hardware description language. Coded and simulated the model. Coding involved converting the basic operation into VHDL code. Simulation involves the generation of various waveforms associated with the code.

PERSONAL INFORMATION
Sex: Female
Marital Status: Single
Nationality: Indian
Hobbies: Enjoying music, Net surfing
Date of Birth: 05/05/1987

Activities and Achievements:

„« Contributed articles for college and school magazines,
„« Active participant in College sports meet.
„« Won prize in short story writing in Youth Festival
„« Student representative in 10th &12th
„« Active member in nature club and NSS

Reference
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1351 to 1400 of 1597)

Go to Search Parameters...

Brief Description

Geologist

A Senior Inspector with more than 20 years extensive offshore/onshore activity in the Oil, Gas, Petrochemical and Nuclear Industries

Construction supervisor (industrial civil works , Algerian HND) (48 GAS wellheads linked to 2 GAS Production trains to 4 GAS marine offloading systems

Associates Degree in Electronics Technology. No work expierience, graduated in 12/06. Ready to work!

Over 25 Years of Crane/Equipment /Rigging + CDL Experience

Rigger crane op scaf

20 years in the Navy I worked as a Supervisor/Quality Assurence/Electronics

Power plant engineer involved in a variety of power plant equipment design and commissioning.

My experienced includes hydrocarbon analysis, pore pressure detection, lithology identification, and subsurface evaluation. Drilling experience on directional, sidetrack, vertical, and geosteering wells, with various drilling fluids, throughout the US and Gulf of Mexico.

Six Sigma,Lean manufacturing practices,Capacity planning,Line balancing,Human Factors

DBA database administrator oracle, system analyst, programmer

Project Planning and Management, and Procurement / Purchasing

I have a varied skill sets and expertise which puts me in a unique position to contribute enormously to a wide range of duties and activities- Ranging from Mechanical Engineering (projects and operations), to Project Management and Process Improvement

Process/Electronic Technician

I am a civil engineer designer with a multi - disciplinary consultancy. I am involved in all aspects of delivering flood alleviation schemes including design of flood defences. I have a BEng(hons) from an accredited university and am finishing my MSc part - time. I also have 2 years of site exp.

My experience in biological science ranges from working independently to working for, State, Federal Agencies and Environmental Companies. This experience has provided me with valuable skills in conducting field research, data collection and analysis on many threatened and endangered species.

Graduate chemical engineer (The University of Queensland), hardworking, quick learner and eager to learn with excellent communication and project & time management skills.

Mechanical technician - rotating equipment, pumps, compressors, heat exchangers, gas, petrochemical industry, valves offshore survival BOSIET. Hazardous area

HAZOP, Risk Assessment, EHS Training, Waste Management, EMS, OSHAS 18001

Graduate in chemical and electrochemical engineering one of the unique course offered by central electrochemical research institute in elecrochemical science , having professional expertise in various electrochemical area with CGP of 7.934 looking for a challenging career in reputed organisation .

Timed served Mechanic with safety certification and good leadership skills

Industrial Projects Management / Engineering Design,Purchase / Supply Chain Management.,Installation, Erection and Commissioning of Machinery,Business Development,Material Management.

Very good analytical and project management skill. Do multi tasking and road warrior.

Mechanical Engineer (Recent Graduate)

Good analytical and communication skills. Can communicate fluently in both English and Tamil. Willing to learn and adapt to new challenges. Self-motivated, dynamic, quick learner and team player.

Motivated scientist looking to bring new and fresh ideas to current environmental projects.

Production Manager with BS in Mechanical Engineering and 8 years of experience in CNC Machine Shops, QC, QHSE, Planning, Inventory Control, Cost Control, Budgeting, ERP (Great Plains), Pro / E, AutoCAD. Good experience in factories start ups. CPIM (Certified in Production and Inventory Management).

Responding to all types of emergencies such as structural, aircraft and shipboard fires, activation of installed fire protection and alarm system, hazardous material operation, and rescue and retrieval operations during times of calamities.

Licensing, installing and configuring Windows Server 2003. Licensing, installing and configuring Active Directory. • Managing physical and logical disc. Configuring terminal services. Managing, monitoring and securing Windows Server 2003 resources. Managing user, group and computer accounts i

A highly skilled and very experienced Supply Chain Professional with over 20 year's expertise in Logistics, Procurement and Materials Control mainly overseas.

Engineer (Design & Vendor Development), (CAD/CAM) Engineer, 1)Planning and maintaining Our Section and the Customer regarding the Development 2) Visit Companies for our tools Development & make Reports on Current Status3)Responsible for the job planning and implementing with the schedules

Senior project planner schedule with 12 years heavy industry and construction projects experience ,professional in using MS Project,Primavera P3&P5,MS office,CMMS systema like SAP R/3 , Maximo. Strong technical background , project management and cost control, contract and claim adminstration

INSTRUMENTATION ENGINEER

Planning, Scheduling, Primavera, Risk management, Pertmaster

I am an M.Tech in Energy Technology and M.Sc in Chemistry. Have Experience Non Conventional Energy Field. Well aware of Electrochemical Power Sources like Fuel Cell, Battery etc. Basic computer skills including language C, C++, Matlab etc.

Mechanical Engineer with wide experience in Manufacturing, Maintenance, Sales and Service, Application Engineering, Project Engineering and Administration. Total experience of 30 years. Can work in any field like Construction, Hospitality Industry and Process Industry.

Ms-word,Ms-Excel,Proficient in management,General HSE certification, HSE Competency Development Course Level 3

If you need a dedicated expert heavy equipment/drill rigs/are welder/fab/design, hydraulics, air compressors, all around field/shop management, i can design/build & repair anything with or without a big budget, will work on contract are as needed!!

Cummins Sales & Service Pakistan (Power Generation)(Nov2007 – to date)Mining Experience(2004-2007):

Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre-commissioning Engineer, Commissioning Engineer, Start-up Engineer, Process Engineer, Chemical Engineer

iosh managing safely and osha in construction safety and health qalified hse officer with 9 yrs experience in safety. other trainings attended: basic rescue, work safely at heights, scaffolding, first aid, fire fighting etc. work experience in india and middle east in construction projects.

Geology degree and Geology Honours degree. Two years exploration geology experience. Currently busy with Masters degree in Hydrogeology on part time basis. Working as geologists at Hydrogeology company.

Detail oriented Instrument and Controls technician seeking international opportunities

20 years experience in Industrial Electronics, Electrical,Mechanical, Pneumatics, Hydraulics

Involved in all construction activities including fabrication , installation and control off all structural items.Steel structural estimates include, pipe-racks, elevated pipe supports, pump shelters, access platforms, handrails, et

2 years experience in an Open pit coal mine. I have done long term planning for pit and dump, various professional reports, tailings dam design and monitoring, and yearly budget planning. Therefore, I have experience in both mining and geotechnical engineering.

Good time management, ability to work with or without supervision and a working experince in a oil and gas industry

Mechanical Engineer, 12 Years Gulf Experience In Maintenance Department

Dynamic Health & Safety Coordinator Looking For Work In Mining, Heavy Construction Or Oil Industry

im interested in doin marine and i spoke wel in english and i know hindi also and my specification is doin work in any circumstances

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 [ 28 ] 29 30 31 32

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out