Resume - Iam a postgraduate in Environment Management worked with various petrochemicals,...

Misco Jobs

Resume #8995

CONTACT INFORMATION:
View contact information...

MARCH 2004 TO PRESENT

Employer: Hamraa Al-Daroua Petroleum Services Co. LLC.

Location: Petroleum Development Oman, Sultanate Of Oman

Position Held: QHSE Engineer ( Oil and Gas E & P Well Services)

Duties

Plan, develop, Co-ordinate and implement Quality Management system ISO 9001: 2001
and HSEMS in the organization
Prepare company policy on Quality, Health, Safety and Environment Management system
Identifying and providing QHSE training needs of employees in well services operations
Conduct monthly HSE meeting, emergency drill, Inhouse training
Training and implementing Dupont's STOP Program, Hearts and mind Program
Prepare annual budget for safety, monitor the expenditure and justify Variance
Develop and facilitate HSE Plan, job safety plans
Conduct incident/accident/ near miss investigations( Tripod Beta, Tripod Delta)
Carry out hazard and effect management Plan (HEMP) &Health Risk Assessment
Co-ordinate with PDO on all HSE matters and tracking of legal compliance
Maintain HSE statistics and report to management & PDO Contract holder.
Quantitative and Qualitative risk assessment, Job Hazard Analysis
Validation of equipments and machineries for the well services
HSE case studies for the well services operation
HSE audit and inspections on Well Head Maintenance, Well Pulling Hoist, Non-Corrosive Pumping and wireline operations
Radiation safety in well services operations
Member of DOIRC – Drilling Operations Incident Review Committee

APRIL 2001 TO MARCH 2004

Employer: Alkatheery Trdg. & Cont. Est.

Location: Petroleum Development Oman, Sultanate Of Oman

Position Held: Environmental Service Engineer

Duties

Plan, direct and Co-ordinate the Environmental services.
Develop and update the waste management systems
Prepare company policy on Quality, Health, Safety and Environment Management system
Plan, direct and supervise Environment protection measures associated with executing present and new projects
Plan, develop and supervise environmental protection monitoring, sampling, analysis and review periodically for compliance and recommend effective treatment system
Prepare annual budget for operating, monitor the expenditure and justify Variance
Handling drilling waste WBM (Water Based Mud), OBM (Oil Based Mud), UBD (Under Balanced Drilling) cuttings, NORM (Naturally Occurring Radioactive Materials), Radioactive materials and other Hazardous waste.
Advise on Operation of Hydrocarbon recovery system, Oil saver pits, Waste Management facilities, and land filling sites & biological treatment systems
Project study on oil recovery from oil contaminated sand using thermal de-sorption technology.
Knowledge on Production water treatment by reed bed technology, Solar dew technology, shallow and deep well water re-injection.
Ensure the training and awareness programme for the site personnel to ensure precautions and practices are taken to reduce the pollution
Co-ordinate EIA studies, Environmental awareness training and EIS
Waste management facilities inspections & audit with reference to PDO HSE specifications, MRME Permit and ISO 1400 requirement.
Statistical interpretation of data on waste generated & recycled by Environment Information System, Environmental Performance Indicator ( EPI)
Hazard Effect Management Plan and other risk assessment studies.

MARCH 1999 - APRIL 2001

Employer: Chemplast Sanmar Limited

Location: Mettur, INDIA

Position Held: Senior Engineer Environment Control

Duties

Developing and updating the waste management system, treatment options, standards and practices
Approving projects and design on all environmental related matters
Inform and advice management on new rules, law and legislation on environment
Review and ensure the company Environmental protection standards, code of practice and procedures are in line with local legislation, statutory requirement and prescribed standards.
Identify and report emissions and propose control measure to reduce emission
Plan, direct and devise standards to eliminate pollution at source
Propose treatment methodologies to minimize pollution effects on discharges and disposal to environment
Erection, commissioning and operation of Effluent Treatment plant comprising of Primary Clarifiers, Bio-digesters, Anaerobic Lagoon, Aeration with Fine Bubble Diffusers, Solar Evaporation, reed bed technology & color removal.
Fluidized bed incinerators with 100% destruction efficiency.
Project on Bio-composting organic solid waste
Plan,develop&supervise PollutionMonitoring for air, soil, water and ground water contamination
Liaise with Pollution Control Board, Ministry of Environment and regulatory bodies
Improving environmental performance by utilising byproduct generated in the process like
- Biogas as a substitution for Furnace oil in Boiler
- Hcl produced in PVC production is used as raw material for producing Ethylene di-
chloride.
Involving local community in bio-composting and treated effluent usage in agriculture.

Process:
Erection, commissioning and operation of Ethylene di-chloride plant, Ethylene Processing plant and Ethyl alcohol plant with continuous fermentation & distillation.

AUGUST 1996 – MARCH 1999

Employer: MEDICORP TECHNOLOGIES INDIA LTD.

Location: Hyderabad, INDIA

Position Held: Junior Execuive Engineer – Environment Engineering.
Duties

Plan, direct and supervise the environmental survey to identify environmental protection measure associated with the development project, production, maintenance activities and review, recommend remedial actions to be considered for discharges, emissions, spill, etc.
Plan, develop and supervise the environmental protection monitoring, sampling and analysis for all discharges, emission to atmosphere and occupational health hazards
Erection, commissioning & operation of Effluent Water Reclamation plant with separate flow for organic, inorganic and Incineration stream.
Effluent Treatment plant comprises of (UASB) Up flow anaerobic sludge blanket, Facultative lagoons, extended activated sludge process, pressure sand filters, Activated charcoal filters, forced solar evaporation and Pyrolytic type incineration
Ensure development of standards, procedures and follow-up the Environment & Quality Management System requirements and up-grade existing system to achieve ISO certification.
Liase with Pollution Control Board, Ministry of Environment and forest and other government agencies for obtaining the necessary permits and no objection certificates.
Rapid Environment Impact Assessment for projects.
Coordinate risk assessment and disaster management plan, process safety studies.

APRIL 1996 – AUGUST 1996

Employer: SIBER

Location: Kolhapur, INDIA

Position Held: Project Assistant - EIA

Duties
I worked with the Environment Management Dept. of Chh. Shahu Central Institute of Business Education and Research, Kolhapur for two months during April '96 to August '96, as a part of my post-Graduation study.

During this period I was a team member of the Environment Impact Assessment Study of INDAL Bauxite Mines located at Chandghad and carried out field and laboratory studies to generate Base Line Environmental Data.

Training and Courses

Seminar and workshop Training on Safety from NTI
(National Training Institute – Muscat)
Environment of Palani Hills HSE Induction
Estuarine Habitat of Pichavaram Incident, Investigation & Reporting
Environmental Awareness Basic Life support
Pollution control in Industries Life saver- Fire Fighting
ENVIRO TECH 95, International Conference H2s Awareness & Escape
Enhanced Site Safety Supervision Job Hazard analysis
Safety Leadership by PDO Permit to Work – Signatories
HSE plan 2002 PDO Supervising safety
HSEMS by PDO Gas Testing
SCBA
Presented paper on oily sand treatment for oil & gas E&P industry, at the
International Environmental conference conducted by MRME ( Ministry of Regional
Muncipalities and Environment) Oman at Albustan Palace Hotel, Oman.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 301 to 350 of 1622)

Go to Search Parameters...

Brief Description

Sr. Geotechnical Engr, Design and Construction of Underground Structures, Mgmt of Multidisciplinary Projects, Numerical Modeling, Rock Mechanics, Ground Support Design, Tunnel Inspections, Hands-on Experience in Applying FLAC, FLAC3d, UDEC and 3DEC Codes in Design, Work Under NQA-1 Q A Program

I am currently a graduate student at the Univ. of Illinois at Urbana-Champaign in the Env. Engineering Dept. I seek a job that will give me the opportunity to explore the field of env. engineering. One in which I can be active both physically and mentally and that challenges me.

Three year working experince in field of hydrogeology and hydrochemistry.

I am a Chemical Engineer with Seven years of experience. My experience can be divided in to two main categories; industrial and consulting, on air and wastewater, treatment, operation and maintenance encompassing permit applications, work plans for regulatory compliance in the areas of Environment,

Hydraulic Design, Troubleshoot, Repair and Manufacture

Petroleum and Natural Gas Engineering, BSc Earth science, MS Candidate

Experience in pollution assessment, emission inventories / monitoring, characterisation of sources, exposure assessment, source testing, data collection & interpretation, emission estimates, regulatory analysis, engineering calculation, presentation and technical report writing.

ME (Environmetal Engineering), 4+ years in desing of waste water treatment units, design of under ground drainage network systems to cities.

Dynamic Assistant Professor of Environmental Engineering broadly experienced in contaminant transport modelling and pollution control in surface and groundwater. Physico-chemical, biological and electrochemical design of environmental control processes, hazardous waste management and treatment.

Iam a postgraduate in Environment Management worked with various petrochemicals, chemical, pharmaceutical, bulk drugs and Oil & Gas E&P industry for the past 8 years in various countries. My experience has been as an Environment Engineer; Environmental Specialist; QHSE Engineer and EMS staff in

Assistant Product Engineer " Wafer Probing ang responsible for Yield improvement "

Desktop technician

Diploma in Mechanical Engineering. (Good in Auto CAD Draughting and Designing)

Senior Weld Mgr / Engineer. I have for decades specialized in providing management support for the implementation of Best Weld Practices and the establishment of Weld Process Controls. I

I have 15 years of working experience with over 5 years in senior management positions with international companies in Asia.

Chillers Process Systems, Compressor Screw & Reciprocating & Centrifugal,Motor Starter,Cascade Refrigeration, Gas Compression,Ammonia Plants,Control Panel, PLC's, VFD's

PhD in enironment engineering

A talented land Surveyor who is able to deliver services in Cartography, photogrammetry, cadastral, mining and Geomatics work.

Technological Assessment and Management -environmental studies, transportation and energy production

Environmental Engineer with more than 7 years professional experience in water projects. Right now, she is acquiring her Masters Degree in Environmental Engineering Science, UNSW, Australia.

I have a BS in Chemical Engineering from Colorado State University. I am a recent graduate from the Environmental Science and Engineering department at Colorado School of Mines, where I completed graduate Master’s research and thesis work specializing in groundwater remediation.

A Graduate in Master of Technology (M.Tech) in Environmental Engineering and Management. having 8 years of experience in the areas of Environmental, Health and Safety Projects Management.

ITI fitter I have 6 years experience in mechanic field also i know lathe ,milling machine operations

Piping Designer PDS CAD

Dynamic, highly adaptive professional offering 20+ years’ experience.

Technical /Project Engineer

I have experience in control systems design, Motor control center design, Variable speed drives, PLC and SCADA programming, power distribution network design. C/C++ and MATLAB programming skills

Proficient in Microsoft Word and Microsoft Excel, Knowledge in Time and Motion Study and Quality Control, Good in communication and writing skills

Experiennced Environmental Scientist

OBJECTIVE A challenging position which provides opportunity to improve my skills as a Senior Process Engineer.

Machine and computer expert

Am adepoju Ademiposi gabriel by name just finished my NYSC,during my youth service i was a site supervisor of construction of Drainage,installation Motorized of Bole-hole in my plce of Primary assingment.

attached for Safety Officer designation

HSE Engineer-a good educated, skilled and experienced individual on construction, fire protection and safety operations aspects, attained from exposure in different industry, hard working individually and in team, friendly and outgoing, self-motivated and well- organized

I am diciplinarian, and had strong in interpersonal and comunication skill with experience in leading the group of fishermen to continous their bussiness improvement. I liked to work with the well planning and target oriented. I had a good knowledge of different social culture of indonesia.

Safety Engineer

Experienced with water/wastewater treatment technologies, Experience in designing reterofitting structures for highway bridges, Good knowledge of urban storm water hydrology and GIS software.

I would like to take this opportunity to present my employment credentials for your consideration, and I would welcome the opportunity to introduce myself to you at your earliest convenience

COMPUTER GEOLOGIST Databases, GIS & 3D Modelling Project & Quality Management

CFD (Computational Fluid Dynamics), Multiphase/Multi-component flows, Fluid Flows, FSI (Fluid Structure Interaction), ASI (Arbitrary Sliding Interfaces), Heat Transfer, Thermal engineering, Design/development, Combustion, Chemical/Reaction Kinetics and Chemical simulation, PhD, Mechanial Engineering

Looking for a challenging position in the field of Civil Engineering, Construction Utilities.

Total 7 years of industrial experience in the large manufacturing set-up/project, in the field of Environmental Management and Resource Conservation and Infrastructure Development projects planning, operation and monitoring.

Strong Academic and Labratory Skills in Geology. Management experience, 13+ years of work experience, Quick to learn, can work solo or in a group, ready and willing to learn anything new.

Sr. Field Engineer, 20+ years, excellent customer service skills, electro-mechanical repair, maintenance

Safety Trainer seeking entry level position with Safety minded company.

BE CIVIL, SPECILIZATION IN ENVIRONMENTAL, MDBA

Experienced Civil / Structural Engineer

Design, collaborative Industrial design, product development, rapid prototyping, surfacing, drafting, Pro/E, Solidworks, plastics, sheet metal, die cast, machining, weldments, tooling, GD&T, analysis, concepting, presentation, project management tools, materials sourcing, costing, vendor interface

I have completed my graduation in Computer Science. Have worked with Bell Canada as a Tech support Customer Representative. Right now working in a telecommunication Industry for Sony Ericsson as Software engineer.

29 years of Intergraph/Microstation, 9 years of AutoCad, 8 years of civil roadway design ,5 years InRoads, 4 years GeoPak, 3 years PDS/Frameworks, 2 years Bentley Structural TriForma

1 2 3 4 5 6 [ 7 ] 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out