Resume - A dynamic HSE/ Safety engineer with 10 years of Experience in Oil/Gas and Petroc...

Misco Jobs

Resume #11896

CONTACT INFORMATION:
View contact information...

Nanthan Ramakrishnan - HSE/Safety Specialist

OBJECTIVE:
A competitive and challenging job to work for the best in technology and to be in the best of company and a position to best utilize my skills and abilities in HSE (Health, Safety and Environment)

PROFESSIONAL SUMMARY:
A dynamic HSE & Loss Prevention engineer with 10 years of Experience in Oil/Gas and Petrochemical industries with strong desire for success, Extensive background in coordination of major projects; Current HSE skills includes but are not limited to the following area: Industrial hydrocarbons and Sour gas (H2S) management, HSE Plan and Policy preparation, HSE MS Administration, Design, Construction, Commissioning, Process Safety and Risk management, first-class analytical and Problem solving skills, Loss Prevention engineering, Safety Audit/Inspection/Surveys, MSDS Database, Quantitative/Health risk assessment(QRA/HRA) Skill, Emergency response, Evacuation and disaster management, Accident/ Fire/Explosion Prevention skills, Investigate and Analyze Accident and Injuries and correct root causes in the work place, good at JSA, HIP, HSEIA, HEMP; fair at HAZOP and HAZID review studies, skills in the use of various safety equipment (gas and fire detector and various gas monitors, F.E, SCBA, Escape hood, lifting and life saving devices, radio communication etc), Knowledge of all safety procedures, which includes work permit systems, lock out/tag out, inspection of lifting gears and scaffolding, confined space entry. Waste management including hazardous waste contingency plan, Radiation Safety, Industrial Hygiene and occupational health/ergonomics monitoring and reporting, HSE Training, HSE Statistics preparation, Review and Report of functional Safety KPIS, conducting HSE committee meeting with client/company/sub contractors. Familiarity with fire and safety standards, codes and regulations such as OSHA 18001, ANSI, CFR, NFPA and API and provided HSE input to bid evaluations and submissions

EDUCATIONAL AND TECHNICAL QUALIFICATIONS
Graduated in Chemical engineering (B. Tech) from University of Madras (Full time residential program), India

Before Graduation: Attained 3 Years full time Diploma in Chemical Technology from Central Institute of Technology, CIT, Tharamani, Chennai, India

After Graduation: Succeeded in post Diploma in Environmental pollution control from National Institute of Ecology and Environment, NIEE, India (Distance Learning)

Additional: Diploma In Industrial Safety from Annamalai University, India (Distance Learning)

PROFESSIONAL CERTIFICATIONS:
Certified Safety Professional by IOSH-UK in IOSH – Managing safely in the Oil and Gas Industries (Full Time), NIT, Oman, Muscat; Certificate No: 169032

Completed NEBOSH international general certificate course in Occupational Health and Safety with RRC, UK, awaiting for Examination result during early August 2006.

Holder of the title 'Chartered Environmentalist' and a life member of Environmental Protection Society, India

SOFTWARE SKILLS:
Application software: Proficient in Microsoft Applications (word, excel, power point, outlook, publishers) and Adobe Photo Shop
Operating System: Windows NT/98/2000/XP
Business Application Software: Good functional knowledge in SAP EHS module
Data base packages: Excel, Coinf and Access, SQL 7.0
Coinf – Database software that best measures the efficiency of Waste, Health and Safety management at the project site

KEY SKILLS
Good command of written and spoken English
Good administration and reporting skill
Good interpersonal and organizational skills
Familiar in IS0 14001(EMS)
Decision making and leadership skill
HSE presentation and training skills

MAJOR ACHIEVEMENTS
Reduced number of LTIs/Accidents by implementing and adhering to the site/job specific HSE procedures and increased number of Near Miss Reporting trend for correction by promoting positive and proactive safe working thought.

Responded immediately to shut off major chlorine leaking line manual valve from the storage bullets when Automatic control system failed that saved company from a major environmental disaster and from a fatal incident

Implemented various tools to improve the database of a Sicon-Coinf software system – a system to figure out the best qualitative and quantitative measure of a waste management and health management and safety management at project site level.

Identified and suggested a best sprinkler fire protection design for a multi loop vertical Heat exchangers model at Rastanura Refinery expansion projects- Saudi Aramco

CAREER HISTORY
Aug 2004 -To date: HSE Manager- at EURABIA Engineering &
Construction Co. For SABIC INDUSTRIES, Al-Jubail, Saudi Arabia

Eurabia is a joint venture Company of Roxby International Co, UK and Taher Group Co; KSA. Eurabia provides comprehensive technical support services to Oil, Gas and Petrochemical, Refining and Power generation Industries. The services includes construction, installation, Plant commissioning, Operation and maintenance. My responsibilities at Eurabia includes but are not limited to the following

Responsible for overall safety aspects at the site and visit sites routinely to ensure safe work practices: Current major concern: Process Safety Management (PSM)
Implemented Accident Reporting and injury investigation programs, Injury and Illness record keeping
Recommended improvements in processes, design, procedures, and operating equipment, to minimize the hazardous potential
Effectively chaired and attended monthly and weekly safety meetings at various refineries facilities- SABIC affiliates
Effectively participated company and plant safety Audits, Safety Inspections and Toolbox Talk
Identified and recommended the right PPEs for the company staffs at various process industries
Organized task based HSE training on Confined space entry, Electrical safety, Manual lifting, Defensive driving and use of MSDS, Eye and Face Protection etc, also prepared and produced necessary documents for employees in the Process industries.
Prepared and circulated Company monthly HSE statistics (various sites) to client and to the company management personnel
Developed a CONTRACTOR SAFETY PROGRAM to bid for Jubail Petrochemical complex maintenance contract
Identified and Arranged medical Check-up and audiometric test annually for all the workers
Prepared and distributed monthly Safety news letters/Safety bulletins on various safety topics as per job and client requirement
Expertise in behavioral based safety
Coordinated Emergency Response & Fire Evacuation Drills in accommodations and sites

Aug 2003 – July 2004: Senior Safety Engineer
Snamprogetti Qatif GOSP -I Project, Saudi Aramco, Saudi Arabia

Given the large multinational Workforce in the region of 7,000 employees involved in a major Gas/Oil separation construction site for Saudi Aramco, a significant challenge has been faced was in the field of Safety/Environmental Occupational health management at site

Directed and coordinated site personnel on Environmental/Health/Safety aspects through site specific HSE MS and HSE plan
Reviewed company safety/loss control programs in line with Saudi Aramco requirements
Delivered HSE training on the use of safety equipment (Fire extinguishers, Gas Monitors, SCBA, Escape hood and Full body safety harness etc) to site employees at all levels of the Construction division and to our subcontractors
Trained personnel on how to report an accident/Incident and safe guard people, company asset and environment and Increased "Near Miss Reporting" significantly for correction and accident prevention
Executed Industrial Hygiene and safety management
Coordinated client extensive project safety reviews and pre-start up safety reviews during commissioning
Provided professional advice on design requirements for Fire/Flammable and life saving systems guided by the Snamprogetti's HSE philosophies as well as Local and International Safety Design Codes/Standards.
Reduced site Incidents/Accidents by conducting regular safety and health audits/ safety walkthrough, toolbox talks and demonstrations
Monitored camp facilities for drinking water, lighting facilities, First aid clinic facilities, water treatment etc.
Managed a team of HSE advisors
Conducted Accident Investigation and implementation of recommendations
Participated in HAZOP, HAZAN review studies

Mar 02 - Aug 03 Safety Coordinator
Snamprogetti - Rastanura Refinery Expansion Project,
Saudi Aramco, Saudi Arabia

As this construction project was carried out within the refinery facilities, we demonstrated a great deal of controlling excess and profuse H2S leak, providing a safe working environment for about 2000 multinational workers for the entire span of Project

Supported site implementation of company's HSE management systems in construction, commissioning and Initial operations
Coordinated and reviewed subcontractor HSE project documentation (site-specific health, safety and environmental plans, job hazard analyses, incident prevention plans etc.)
Participated field safety surveys with Loss prevention team and recommended loss control methods for refinery construction facilities
Liaison with clients on project HSE matters
Conducted Safety committee meetings with client and contractors.
Prepared and carried out training of all personnel expatriate and local (Saudis) in safety orientations and contents of HSE manual. Site and Job specific training delivered on H2S awareness and escape, basic firefighting training, confined space entry, work permit, radiation safety, hydro testing, working at heights etc.
Prepared monthly updates on HSE statistics
Coordinated the investigation of any HSE incidents and ensured that any resulting action items are closed out
Organized and carried out various procedure compliance audits such as work permits, fire safety, housekeeping, PPE, scaffolds, lifting, excavation etc
Participated in HRA, JHA and HIP prior to all new activities and process facility development
Monitored Camp hygiene program as per Saudi Aramco requirements
Monitored Physical and Chemical Hazards (Industrial Hygiene) at the project site
Inventory of Waste (Water and Industrial Waste)
Developed and delivered safety presentations to Personnel, Clients and Sub contractors
Worked with field safety personnel to enhance skills and promoted sharing of best practices

Dec 00 – Mar 02 Safety Engineer
Keerthy Bangalore Pvt Ltd, For a Large Sulphuric Acid Plant – India

Worked for a large DCDA Sulphuric acid processing plant on a rotate shift system with company and sub-contractors personnel of 350 employees

Promoted HSE Culture
Organized safety training, inductions and awareness campaigns whilst providing daily recording, monitoring and communication of all site safety issues
Augmented the regular fire safety inspections and gave recommendations to remove hazards/Prepared Fire Emergency Plan
Implemented the HSE Management System requirements on Company personnel, Vendors & Contractors
Developed and Implemented various HSE audit programs and inspections
Prepared various training procedure for the safe operation of Process equipments and conducted Tool Box Meeting.
Performed safety review and Process Hazard Analysis (PHA)
Liaison with various regulatory bodies

Sep 98 – Oct 00 HSE Advisor
Al-Hassan Engg Group companies,
For Petroleum Development of Oman -Muscat

Worked for South Oman Gas and Oil fields for C, M, E & I contract to prepare Oil rig sites. Hook up rig tanks, supply deep water to Rig drilling Operations and hook up Oil Well Heads,

Ensured that HSE plans and relevant HSE-MS and ER documentation is established
Monitored adherence to the Project HSE Plan through inspections and audits
Submitted HSE plan for critical S/D activities
Coordinated joint safety campaign with other contractors to inspect and audit client and contractors various facilities
Monitored cross country road safety whilst transporting heavy equipments to rig sites
Carried out quantitative Risk Assessment, HIP and JHA for specific work
Administered Occupational Health and Food hygiene program at the site and at camp facilities as per Petroleum Development of Oman, Muscat and Conducted Camp Accommodation & Canteen / Kitchen Audits
Conducted Fire and Emergency Drill on sites and camps
Prepared & Conducted Safety Training Program on defensive Driving training, H2S Emergency escape, etc for company and Sub-Contractors Employees
Minute taking at monthly safety meetings
Participated in accident/incident/and near miss investigations and implementation of corrective actions where required
Gained knowledge on the application of Shell safety standards

Apr 98 – Sep 98 Safety Engineer
Imperial Chemical Industries (ICI), India, a Joint venture of ICI-UK Plc

ICI is the producers of Bulk drugs and pesticides on manual and semi automated methods where the risk of personnel involved was more

Promoted the effective use of existing HSE management tools and techniques on each work area
Checked and monitored Effluent treatment plant (ETP) samples
Ensured compliance with the relevant Environment legislation and liaise with pollution control board.
Monitored Occupational Health and Waste Management at the Pharmaceutical and Pesticides division
Trained company personnel about hazardous wastes and their health risk management
Assisted in the preparation of relevant Monthly/Quarterly reports as required
Participated in, reviewed Hazard Identification and Risk Assessments as required

Jul 93 – Aug 95 HSE Officer
SPIC ORGANICS Ltd, India,
A giant Petrochemical complex

Spic Organics handles the Ethylene Oxides and Propylene, Chlorine to produce the Propylene Oxide, Propylene Glygol and Polyol that are high in fire and explosion hazards

Reviewed the comments on safety designs and drawings on fire protection systems, emergency shut down systems, cause effect diagrams, Failure Mode Effect Analysis (FMEA) for each activities that carries greater hazards
Participated Emergency Response drills & exercises
MSDS Management of various hazardous products like Polypropylene, Propylene Glycol and Polyol.
Participated in the investigation of accidents / dangerous occurrences, and recommend means of preventing recurrence of such an incident

TRAINING RECEIVED FROM SAUDI ARAMCO and PETROLEUM DEVELOPMENT OF OMAN
Gained professional safety training on Work permit receiver, Hazards recognition course, Gas testing, SCBA Standard, Fire fighting, Scaffolding inspector from Loss Prevention Dept, Saudi Aramco (Certified)

Accomplished safety certificate courses on Supervising Safety, Permit Work Signatories, Incident/ Accident Notification/ Investigation Reporting & Follow up Procedures, Basic Life support &First Aider Course, H2S Awareness and Escape, Environmental Awareness from Petroleum Development of Oman, Muscat

ADDITIONAL INFORMATIONS
An active and enthusiastic individual, comfortable with people from all walks of life, enjoys working as part of a team or individually as the need arises, has extensive experience in motivating and monitoring groups of all sizes.

Self-starter, have the ability and versatility to learn new skills and techniques as required and appreciates the opportunity to use own initiative and skills to deal with differing situations.

Competent and capable of operating to the highest standards and to the satisfaction of employers, clients and colleagues

PERSONAL DETAILS
Language Skills: Good knowledge and fluency in written and spoken English; Hindi, Malayalam and Arabic are at working level; other native languages known: Tamil, Telugu.

REFERENCES
Names of referees will be supplied on request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 601 to 650 of 758)

Go to Search Parameters...

Brief Description

Sales, marketing, advertising and merchandising, administrative support for major projects, Strong analytical and organizational skills, excellent MS Office skills (MS Word, Excel, PowerPoint, etc)

I completed a B. Tech degree in Environmental Health at Peninsula Technikon. I also completed short courses in Environmental Management, HACCP, and Audiometry. I did my experimental training at the Worcester Municipality, Worcester Abattoir, and Maitland Abattoir.

MSc Applied Geology with specialization in RS and GIS Plus 2 Computer Diplomas of 1 yr duration each.

I have experience in researching well and lease records for petroleum prospect mapping and in well site services/ mud logging.

Registered as Professional Civil engineer 2124-11 in Engineers Australia

Have been employed full time since 1981. First 15 years in the military, specializing in explosive ordinance disposal. Since 1997 been working on middle and higher level Security and Safety management. Have extensive security qualifications and experience and very good Safety and Health experience.

Over 20 years experience providing quality customer service. Excellent organizational skills, ability to follow through on multiple tasks and meet deadlines. Dependable, goal oriented, and a team player. Demonstrate readiness to accept new challenges.

Mechanical Engineer (B.Sc. - Istanbul Technical University - ABET accredited university), Strong command of English, Occupational Safety and Health engineer, Pipeline engineer, Member of ASME, National & International work experience, Good communication & social skills, Result oriented work approach

Finish all my subjects of the Career of OIL ENGINEERING, in the Autonomous University Gabriel René Moreno (U.A.G.R.M), counting at the moment with the Title in National Provision, and got the title of Environment Fiscal and Advisor Under norms SO 9000, ISO 14000, OHSAS 1800 SA 8000, and Consultants

B.E(Electrical Power) Engineering, A good skill in production and maintenance of electric transformers and consultant on Quality Management System(ISO 9001)

Sales, Customer Service, Accounting and Administration with 6 years of experience in Multinational Companies, Banks & Large Organizations in INDIA and ABROAD.

Experienced mining engineer, mine layout and design, design and scheduling of waste stockpiles, roads and utility planning, drill and blast layouts, scheduling, short term planning and project work

Just graduating with a B.S. in Geology. My degree includes a large portion of field work, including: vibracoring modern sedimentary environments (St. Croix, U.S.V.I); studing deformation of the Cumberland Overthrust; hydrology work. I am a quick learner and hard worker.

IT Microsoft Technologies for object-oriented development including VB.Net, C#, ADO.Net, COM, XML, VC++, SQL-Server, Oracle, MS-Access, and Web technologies like ASP.Net, HTML, JavaScript, etc.

I HAVE 4 YEARS OF EXPERIENCE FROM THE MILITARY AND 3 YEARS OF EXPERIENCE CONTRACTING IN KUWAIT AS AN ELECTRONICS ENGINEER

uranium processing,ground water analysis,lab operation

HONOURS ENGINEERING DEGREE,ASNT NDT LEVEL-2 in RT,UT,PT,MT,CATIA V5 DESIGNING,JAPANESE LANGUAGE

Oil field,heavy equipment operator,driver

ASE certified in brakes, steering and suspension. good with computers, scanners, and most things mechanical.

Punctual, diligent, detail-oriented. Superior oral and written communication, organizational and time management skills. Demonstrated expertise in data collection and reporting, statistical analysis, and trend identification. Expert with Microsoft Office applications

Hands on experience in the dynamics and data types of the Oil & Gas exploration industry. Proven reliability and commitment to getting tasks done under tight time constraints. Good time-management skills with an emphasis on attention to detail to ensure quality of data whilst working to a deadline.

Talented mechanic seeks overseas assignment

A dynamic HSE/ Safety engineer with 10 years of Experience in Oil/Gas and Petrochemical Industries with strong desire for success. B.Tech Chemical Engg graduate, NEBOSH-International Certificate in Occupational Health & Safety, IOSH Certified in Managing Safely in Oil and Gas Industries from UK.

Washington Class A Commercial Drivers Licenses with Air Brakes Endorsements: Doubles/Triples, Tanker, Hazardous Material

Service engineer (diesel gensets) commissioning, servicing, maintenance

Warehouse, forklift, labor, some machines operator,

Mechanical Drafter ( Auto Cad Operator)

I bring a wide range of Contract Administration experience with me as well as specific experience suited to International positions. I have a keen ability to follow policy and strive on ensuring 100% compliance to my employer.

Proven capabilities in HSE supervision and training: this includes heavy construction, onshore & offshore drilling and diving with an assertive personality sensitive to multicultural & multi-national environments with the ability to work and train workforces in remote and harsh environments.

IT expert, Helpdesk Support, Server Administration, IT Manager

Bsc Honours (Geology), BSc (geology, Zoology, Chemistry); Exploration/Resource Geologist with varirty of skills, such as Datamine, InTouch, ArcGIS, Surfer, GeoDatabase Management

Bachelor of Science degree majoring in Environmental Science and Biology. Previous job focused heavily on Environmental Regulations and Storm Water Pollution Prevention. Proficient with computers, (both PC and Apple) and all Microsoft Office programs and Lotus Notes. Highly organized & efficient.

Offshore, Leadership, Cementing Operations and Maintenance

BSc Electrical Engineer; PLC Programmer, Maintenance Engineer, Production Manager

MBA Industrial Managemant, MSc Engineering and Graduate in Mechanical engineering, Experience in CAD/CAE - Finite Element Analysis and Modeling using MSC Nastran, Patran and Hypermesh

Superior technical, writing, and people skills will add value to company.

I am a holder of a BSc Honors Degree in Mechanical Engineering and have 3 years working experience as a Mechanical Projects Engineer in Heavy engineering, materials handling aresearch and development and in a Petrochemical Industry

Maintenance professional, Electrician, Steam, Safety, Instumentation, multi-skilled

MBA - International Business, M.Sc - Environmental Engg, B.Tech - Chemical Engg; Knowledge of ISO 14001, ISO 9001, OHSAS 18001, environmental regulations, sustainability issues, CSR, chemical processes, environmental protection technologies; Possess project mgmt, consulting, business strategy skill

Iam a 5 years experienced visual basic programmer, very talented in ADO programming, now working in Dubai,UAE. as Software support Engineer, having very much knowledge in barcode soultions development and skilled in handling barcode industry related hardwares

Accountancy Honours & Honours diploma in Network centered computing

Dual masters degree in mechanical and manufacturing engineering

I am an extremely driven individual that thrives under pressure. I work well as an individual as well as a team player. I have strong statistical skills and the ability to accurately and efficiently present findings both orally and in written. I am dedicated to acheiving excellence.

Engineer seeking Challenging job

Production reports, seismic data processing, independant team work, computer skills, fluent english, qc department, field.

I am a Geologist with 5 years of experience in one of the Asia's best exploration and production petroleum company - ONGC. I am willing to relocate and have an ability to work for the organisation with full efforts.

Waste management,mud processing,handling and containment,solids control

Information Technology, IT Operations & Implementations Regional Manager

Telecommunication Enineer

SAP FICO Configurator

1 2 3 4 5 6 7 8 9 10 11 12 [ 13 ] 14 15 16

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out