Resume - Extensive working experience in Chemical Processing, Power Generation and Oil & ...

Misco Jobs

Resume #13731

CONTACT INFORMATION:
View contact information...

BACKGROUND SUMMARY
I am a dedicated individual that works well at all levels in an organization. I am a strategic thinker who is able to resolve issues and articulate solutions. As a Mechanical Engineer I have over 22 years of management and staff level experience in project, maintenance, operations & safety management experience in chemical processing, power generation and oil & gas industries.

Currently, I am seeking a challenging position where I can utilize my Engineering and ERP skills and experience to add value to an Organization

Specific skill areas include:
- Preparation of Expenditure Proposals for new and expansion of existing plants
- Preparation of Front End Design Manual for new and expansion of existing plants
- Project Management from initial design, selection / manufacturing of equipment through to installation and commissioning
- Preparation of predictive / preventive maintenance schedule and overhauling procedures
- Investigate mechanical failure or unexpected break-down of equipment
- Training of plant operation and maintenance staff on effective use of MAXIMO
- Preparation of material, cost and timing estimates, reports and design specifications
- Procurement of material for mechanical and electrical systems
- Preparation of contract documents and evaluation of tenders for industrial construction
- Supervise and inspect the installation, modification and commissioning of mechanical systems at construction sites and industrial facilities
- Developed Site Engineering & Safety Procedures for providing necessary training to the staff
- Developed Training modules for Staff on specific plant operation & maintenance issues
- Develop and establish Warehousing and Inventory control systems

TRAININGS & COURSES
- Managing for Performance; ICI Pakistan Ltd., Karachi- 1999
- Fire & Explosion Hazards; ICI Pakistan Ltd., Lahore- 1999
- Hazard & Reliability Appreciation; ICI Pakistan Ltd., Lahore- 1999
- Discipline & Grievance Handling; ICI Pakistan Ltd., Lahore- 1998
- Introduction to ISO 9000; SYSTEMS.9000 International Training, Khewra- 1998
- Effective Time Management; ICI Pakistan Ltd., Khewra – 1997
- MAXIMO-Computerized Maint. Management Software; ICI Pak. Ltd., Khewra-1997
- Primavera- Planning Software; Pakistan Naval Engineering College, Karachi- 1996
- Re-Engineering; Pakistan Institute of Management, Karachi- 1995
- Safety, Health & Environment; ICI Pakistan Ltd., Lahore- 1993
- German Language Elementary level; Goethe- Institut, Karachi- 1983
- Maintenance Management; Petroman, Karachi- 1982
- Apprenticeship- Engine Overhauling; PIA Workshop, Karachi- 1979
- Apprenticeship- Cessna Aircrafts; Lahore Flying Club, Lahore- 1979

PROFESSIONAL EXPERIENCE
* Engineering & Erp Consultant 2003 - Present
Working as an Independent Engineering & ERP Consultant for the Oil & Gas, Chemical Processing and the Beverage Industry

* Presson- Descon Intl. Limited 2002 - 2003
A joint venture between Presson Manufacturing a Canadian company and Descon Engineering a Pakistani company responsible for EPCC projects in the Oil & Gas sectors.

Projects Manager
* Mazarani Gas Processing & Compression Project- Ppl
* Design, Fabrication & Supply Of Three Phase Separator- Bp
* Engineering & Erp Consultant 2001 - 2002
* Sap Partner Academy 2001 - 2001

Acquired comprehensive, module-specific knowledge followed by case study and certification test as a SAP R/3 Materials Management Consultant in Release 4.6B during several weeks' training.

* ICI Pakistan Limited 1988 – 2001
During my tenure at ICI I held the following positions which were attained through promotions
* Power & Services Manager- Soda Ash Business
* Contracts & Liaison Manager- Polyester Expansion Project
* Procurement Manager- Soda Ash Expansion Project
* Estimation Engineer- Refined Sodium Bi-Carbonate Project
* Construction Manager- Power Generation Project
* Design & Materials Co-Ordinator- Soda Ash Expansion Project
* Project Engineer- Polyester Expansion Project

* Crystal Chemicals Ltd. 1984 to 1988
A private limited company with an annual turnover of USD 10 million engaged in the manufacturing of Stearic Acid, Glycerin, Toilet and Laundry Soap.

Technical Manager
* National Fibres Limited 1981 to 1984
A state owned company with an annual turnover of USD 54 million, engaged in the manufacturing of 12,000 ton / annum man-made polyester staple fiber and 3000 ton / annum draw-texturized yarn

Deputy Manager (Maintenance)

EDUCATIONAL QUALIFICATIONS:
B. Sc. Mechanical Engineering 1980
SAP R/3 (4.6B) Certification 2001

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 837)

Go to Search Parameters...

Brief Description

Finance*Strategy*Management*Sales*Contracts*Financial Services*International/Global Trade

Geologist with background experience in Mining and Exploration of mineral resources- gold and base metals. QAQC for sampling projects. Ability to prepare technical Exploration reports for Project Managers incl drilling proposals.MapInfo, Micro-Mine, Vulcan, MP3, MS-packages.Ore reserve calculation

Master of Science in Mechanical Engineering Zone and Energy Manager, Facilities Maintenance Manager

CHEMICAL PLANT OPERATION

Project Management / Lean Training / PFMEA (Process failure modes and effects analysis) / PCP (Process Control Plan) / PFD (Process Flow Diagrams) / Lean Manufacturing / 5S / Value Stream Mapping / Visual Management

Logistics, shipping and Offshore Assistant

Driven by innovation and integrity as a member or your technical group I will be able to provide technical drafting support using the latest version of Microstation, Intergraph, Auto Cad and other GIS, ICGS software platforms. In addition, perform non-routine and complex drafting assignments, Coordi

I have 12 years experience in the South African Police ( VIP Protection , Access Control , Cime Prevention , Investigatins ) , 3 Years experience in The Private Security Industry ( Regional Manager ) and 1 year experience in conflict zones ( Baghdad , raq as a Mentor / Advisor )

I started my career in 1991. I am a qualified fitter & turner (trade) Currently working as a workshop foreman. Did courses in inspection (QC) and management.

Hard working and Dependable Environmental Professional

I have been involved in developement and implementation of various safety programs and helping create safety cultures within organizations on and off the job. My most recent assignments have been in UAE and Mexico as a HSE Manager and I would like to continue in this role.

Experienced Automation/Process Control Engineer

Windows NT4.0, Windows 2000, Windows XP professional, home edition, Windows 2003 Enterprise edition server, Windows 2003 Standard edition server, Windows 2000 Advance server, Novell Netware LAN & Windows for Workgroup. RIS server, DNS server, DHCP server. Symantec server (NT, 2000, 2003 server),Rout

FRAMME (Intergraph), Microstation (Bentley Systems), Projectwise, C++, Microsoft Office, HTML, Matlab, AUTOCAD,

Geotechnical, Geological Exploration, Resevoir geologist

* MBA in Asset Management and Graduation in IT. * Proven ability to manage complex projects. * Building motivated teams to accomplish capital projects.

I am interested in employment for any position where I may acquire new skills or my current skills may be fully utilized. I have experience in Crush and Convey, Leaching, Haulage, Safety and Environmental areas. Upon my employment I will bring a safe and positive work ethic to your company.

Organizational Development •Procurement & Purchasing Systems & Hardware • Operations Management •Business Development • System Analysis • MIS Administration • Inventory System Control • Team Management • Regional ICT Management • Regional MIS Management • Regional Database Management

ms word,internet marketing,power point,quality control assuransce,NIM nigerian institute of management , NISLT nigerian institute of science and lab technicaince , PGD post graduate diploma in industrial chemistry , HND in polymer technology

Initially degree qualified as an Electrical/Electronic Engineer, I have been working in the field of DCS Control systems for the past 25 years. I have worked as a Field Service Engineer, Application Engineer, Systems Engineer, Commissioning Engineer. Primarily with Foxboro systems.

Logistics & Transportation

I am electrical diploma holder,having ten years experience in variety of field like textile company,power plant and research centre.I desire to settle in Australia for betterment

Free! In excess of 15 years Health and Safety experience. Strong coaching. Leadership skills and experience in BBS. Experience includes large 3D programs in all types of terrain including mountains, Arctic, and cold weather conditions.

Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)

Highly qualified HSE Contractor looking for overseas positions.

Chemical engineer

Dear Sir, I am a highly motivated person who works hard to accomplish my vision for the Future. The success of your company fits perfectly within my vision, and I firmly Believe I possess the tools to help your company thrive. In my most recent experience, I took on a leadership position a

With over three years of experience in commercial and highway projects, I have developed a strong background in planning and designing; consequently, I have developed effective quantitative and drafting skills in AutoCAD 2D &3D and MicroStation/GEOPAK, Inroads, TransCAD, LDD and also planning skills

Chemical Engineering, Control System engineer. Pipeline operation. Catalyst

Journeyman Heavy Equipment Operator/Foreman 10 yrs exp.

I have experiance in sulphoric and sulphonation factories

Livelink Administrator, Causeway Collboration Administrator

I completed my Bachelor of Science in Agricultural Economics and Agribusiness in the year 2001 and have completed the MBA programme majored in International Business in August 2008.

Good in warehouse/steel company settings. Good use of math and industrial tools. Can be self starter.

I'm a 33 year old African (Tanzanian) male, a holder of Bachelor of science (chemistry/Botany) degree. I've over the years accumulatedgreat analytical and technical skills, excellent communication and interpersonal skills, a team player and a very fast learner able to cope and fit in fast.

Catia, Solid Works, Solid Edge, Pro/ENGINEER, Adobe, Microsoft Office ( PowerPoint, Access, Project ), Photoshop, Blue Prints, Design, Product Development, Plant Layout Strategy, Six Sigma, Lean Manufacturing, 5S, , Injection Mold Press, Class A/CDL license, Lathe, Forklift, Donkey-lift, Milling

PARAMEDIC(ADVANCED LIFE SUPPORT)/FIREFIGHTER/ EMT RESCUE TECHNICIAN

I am conversant with offshore rig operations,such as;logging while drilling,measuring while drilling, mudlogging,formation evaluation.I got this skills at chevron,during a nine months intership.

I have project management experience in all phases of pump installations, well development, geothermal installs. I can run almost any type of equipment. I have worked at geothermal powerplants and mines all over the western states. I all keep my crews safe and productive. Can work well with others.

i am having 13 years of experience in condition monitoring and in plant inspection includes vibration, vibration analysis, balancing, ndt, coating & corrosion and welding inspection.

I am a graduate of Eastern Michigan University and enthusiastic to work in my field. I am a hard worker, efficient, accurate, knowledgeable and I am eager to continue my education both through job experience and additional classroom learning

Over six years experience as a professional geologist with training in petroleum geology, mining geology and geochemistry

Mining Engineer with Business Administration experience in one of the world's largest cement company

A young, dynamic, astute, confident, result-oriented and self motivated person with the ability to handle pressure of a working environment and also work well within a team. Smart in appearance, proven starter with strong analytical skill and an enthusiastic fast learner.

4 years experinece in electronincs and electrical related works and in embeddeded sytems

HUMAN RESOURCE PLANNING, ADMINISTRATION, RECRUITMENT & SELECTION, ORIENTATION, TRAINING & DEVELOPMENT, PERFORMANCE MANAGEMENT & EMPLOYEE RELATION MANAGEMENT

Young Mining Engineer (short experience in geophysics - jr Observer, HSE Officer, and coal mines - trainee)

Master Mariner, Class 1: Graduate doing MBA: Employed as Planning Manager with a Container Company

As site Geophysicist/ project coordinator in UNICEF (United Nation Children and Education Funds), Geologist for GABIMO ENGINEERING CO LTD and National Water Resources Institute my principal responsibilities were to ensure that all projects were carried out in consonance with requirements and standar

All activities relating to Electrical Construction projects such as installation & commissioning of Electrical equipments namely generator, Transformer, HT. LT panel, Laying of power, Lighting cables & Lighting Fitting

1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out