Resume - Electronic/ Mechanical Tech

Misco Jobs

Resume #76683

CONTACT INFORMATION:
View contact information...

Work Experience

Field Service Tech
Aerotec (Sub-Contractor)
August 2008 – Present
Piping Instrument Diagram (P&ID) Validation Procedure and Data Collection.
Working on 11X17 Piping Instrument Diagram P&ID drawing, noting the location of all pipe connection flanges on the P&ID, Verifying that all piping T- connections, blind flanges, reducers, equipment/valve/device: ie. Scrubber, ball valve, actuator, pressure transmitter, compressors/cyclinders and noting piping that is insulated also showing the proper sequential order and location on the drawing symbols. Data Collection gathering information on transmitters, level switches, pneumatic controllers, heat trace controls, temperature elements, pressure temperature and level gauges, manual valves, actuated valves, PSV, pumps, compressors, tanks, vessels, and heat exchangers. Recording all information shown on the name plate/data plate, including manufacturer, model #, range w/units and most importantly the setpoint.

Field Service Tech
Hilliard Energy/Copier Service Co. (Sub-Contractor)
July 2008 – August 2008
The copier service technician provides customer service by maintaining, servicing and repairing office equipment at customer locations within the assigned territory. Set up and prepare new copier/fax/scanner equipment for install, Responsible for on-site repair and maintenance of copier/fax/scanner equipment, Refurbish used equipment, which includes cleaning and repairing, Assist with warehouse duties and serve as back up for delivery driver, and Provide outstanding support by meeting customers needs in a courteous and timely manner.

Electronic/Field Mechanic
Field Tech
Abilene New Holland
July 2007 - June 2008
Field Service Technician, Perform preventative maintenance and make repairs to diesel engines, and gasoline and diesel-driven construction equipment. Typical examples include bulldozers, cranes, bucket loaders, graders, forklifts, container lifting equipment, air compressors, and other engine-driven or towed construction equipment. Engineer Equipment Repair Hydraulic equipment, Motors 3 Phase, Mechanical on heavy equipment, Electrical/Electronic and Lube Service's.

Mechanic/Electrical Tech
Employer: Key Interprise (Sub-Contractor)
Abilene, Texas
November 2005 - July 2007
Field Service Technician, Support engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro-mechanical systems, experimental design circuitry or specializes test equipment. Applications included analog, digital and/or video circuits, and logic systems. Work from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions. Performed operational test and fault isolation on systems and equipment. Assists in determining methods or action to remedy malfunctions. Assisted in the design, construction, test and check-out of test equipment. Used manufacturing, test, development or diagnostic equipment, including, but not limited to test programs o-scopes, signal generators and specialized test apparatus. Also Responsible for the scheduled maintenance and repairs, mechanical and electrical troubleshooting of controls, switch gears and accessories such as batteries, battery chargers, heaters, motors and pumps, and all other components in a generator. Experience with PLC's, relays, digital/analog inputs-outputs signals. Mechanical-Electrical troubleshooting and/or repairs of marine, aeronautic,

Fernando Gomez and power generation turbines or diesel engines. Installing Cables, Wind Turbines, Mechanical Installer, Heavy Equipment mechanic.

Contractor Worker
Employer: Ginn Group (Sub-Contractor)
Title: QA/QC Inspector/Mechanic
Location: Temple, Tx
Duration: 01/2005 - 05/2005 (Temp. Contract)
Job Duties: The Maintenance, repair and overhaul of gasoline and/or diesel powered vehicles, equipment and related hydraulic pumping units, hoses and pressure lines, electrical, and electronic components systems; fabricate, install and retrofit related ancillary devices; perform related work. Incumbents work around heavy equipment, toxic fumes, gasoline, diesel fuel and solvents, and high voltage. Typical duties: mechanical and hydraulic systems.
Troubleshoots, designs, fabricates, and installs electronic controls, hydraulic systems, and electrical circuits; removes, repairs, or rebuilds components parts such as starters, alternators, generators, and carburetors; diagnoses and repair heating, cooling, and emission systems.

Employer: United Defense
Title: Field Engineer (Sub-Contractor)
Location: Fort Hood, Tx
Duration: 01/2004 - 01/2005 (Temp Contract)
Job Duties: M88A1and M1A1 system and various track laying equipment. Military Track & wheeled Vehicle repairer experience. Knowledge of Army Supply Upgrade Modifications on Maintenance policies. Knowledge of army DS/GS shop functions. Experience in U.S. Army DS/GS Maintenance operations, and Track vehicle mechanic in troubleshooting and performs unit maintenance on internal combustion engines and accessories, power trains, and chassis components of track vehicles. Performed repairs and preventive maintenance checks and services. This position also tests lead acid batteries for serviceability. Also prepared vehicles for operation under abnormal conditions by sealing, waterproofing, and servicing with special fuels and lubricants. Also performed unit maintenance to correct malfunctions of mechanical, electrical, and hydraulic systems or components. Performed preventive maintenance on tools, repair parts, assigned vehicles and uses shop equipment to adjust operating mechanisms. Also included in this role are tuning engines, repairing parts and components as outlined in appropriate maintenance allocation charts, interpreting schematic diagrams, and determining the extent of required corrective actions and repair parts. Also tested and operated vehicles and equipment, and observes for evidence of abnormal operation and assisted in the operation of, track vehicles in conjunction with maintenance and recovery operations.

Employer: Texas Aerospace Services
Title: Technician (Sub-Contractor)
Location: Abilene, Tx
Duration: 05/2002 - 01/2004 (Temp Contract) Job Duties: Responsible of Training in the maintenance repairs and rebuild of Aircraft parts. Technical services required by the company and able to use the ability to achieve efficient production and overhauling and repairing and testing of equipment and doing the level of DEPOT level maintenance and Performed repairs on hydraulic canopy actuators, hydraulic door actuator, jackscrews, hydraulic vales, truck unit landing frame, and Pressurize the entire system for any leaks or pressure lost in the entire hydraulic units system in the air craft. Also repairing circuit boards and replacing components like diode, resisters and other parts that are also part of the electronic field and testing with AC/DC power. Equipment of repairing are as follows. Conducts non-destructive inspections by radiography, ultrasonic, eddy current, magnetic particle, and liquid penetrant. Evaluates results and makes recommendations to correct deficiencies as appropriate. Performs non-destructive inspections on and certifies the structural integrity of OH-58C, UH-60A, and UH-1V and all associated equipment. Maintains all NDI equipment within guidelines of operator responsibilities. Reads and interprets customer and manufactures Technical Orders and other specifications to determine feasibility and methods of repairing or replacing components, actuator Electro Mechanical for B1B, Actuator Rotary Electro for F-16, Regular Actuator for F-15, Trowel Positioned for Black Hawks, Valves Rotary Cam for F-15, F-16, C5, C-130, Emergency Controllers for B1B, Fuel Mass Flow meter Transmitters for KC-135, Transmitters For Various Aircraft, Trim Box Calibrator for F-15, and Electrician for other aircraft. Also Troubleshooting malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating
Fernando Gomez systems. Also mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. Also interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Performed 100-hour, progressive, isochronal, phase, periodic and other hourly or calendar inspections. Examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments. Also maintenance records description of the work performed and verified the work that was performed satisfactory.

Employer: Raytheon Company
Title: Writer/Instructor (Sub-Contractor)
Location: Kuwait
Duration: 05/2001 - 04/2002
Job Duties: Responsibilities in Generate instructional material, i.e. lesson plans and student guides, supple mental texts, and other materials as required by the Scope of Work as supervision as a Supervisor. Training present instruction in accordance with the Program of Instruction and update reference documentation as required and cross training operations to maintenance; maintenance to operations; analog to digital and digital to analog.

Employer: US GOVT.
Title: Instructor (FAADS) 1712-GS9
Location: Fort Bliss, Tx
Duration: 09/1999 - 03/2001
Job Duties: Worked as an Instructor conducting training on subjects in one or more courses covering the components of software (UNIX, NT, WINDOWS 95/98/2000, MS DOS), and hardware for the Forward Area Air Defense System to include associated communication and test equipment and all Product Improvement Program. Knowledge of operation and technical characteristics of the 140A Military Occupational Specialty, (MOS), and entire Air Defense C3I, Air Defense C4I, JTAGS, THAAD, Patriot Air Defense Systems, (PCOFT), OPERATOR/MAINTENANCE. Design new training courses which conform to existing guidelines and precedent, or revise a course which requires only minor modifications for Air Defense Weapons Systems using the Systems Approach to Training, (SAT), process.

Computer Maint.
US Army
All, US
Employer: US Army Patriot Maintenance DS/GS
Title: Service Member
Location: United States and Germany
Duration: 04/1977 - 08/1998
Job Duties: Performed clerical and administrative work in support of the office organization. Used varied and advance functions of word processing software to create, format, modify, edit, and print a variety of letters, reports, memos and other text documents. Provided Operator Maintenance, Direct Support/General Support, (DS/GS), for the entire Patriot Systems. Training Instructor for the DS/GS Depot level Maintenance, TMDE Instructor on how to work all digital and analog test equipment. Prep. Lessons plains for training IAW Army Regulations.

Fernando Gomez

SPECIALIZED TRAINING:

MOS 27X Patriot Missile System Direct Support/General Support 18 Months
MOS 14E/24T Patriot Air Defense Operator/Maintainer 12 Months
MOS 27M Track Operator, Multiple Launcher Rocket System Repairer
MOS 24U Nike Hercules Missile 12 Months
MOS 140A C3, C4I Air Defense Integrator 4 Months
106 Hours of Digital Technology Performance
40 Hours Instructor Training Course
40 Hours Category E Solder
40 Hours Category F Wire Wrap
24 Hours Resident Testing Workshop
12 Hours Counseling and Guidance
48 Hours Self Development Test Workshop
Master Instructor
80 Hours System Approach to Training, (SAT)
484 Hours of Digital, Microprocessor, Microwave, and Electronic

Fernando Gomez

Education
Central Texas Coll.
Associate Degree in Computers
Science
June 1988 - May 1992

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 839)

Go to Search Parameters...

Brief Description

Looking for career enrichment opportunities in Sales & Marketing, Business Development, Technical Services, Operational Manager, or Telecom commercial consultant with a frontline organization

Highly Trained Manager

Senior Program, Project, and Construction Management Engineer

I have served as the catalyst for successful Operations, Production, Projects, Technical Support, Client Relationship Management and Team Management, complimented by Bachelor’s Degree in Engineering (B.E) – Electrical & Electronics , Bachelor of Science (B.Sc) in Physics & Six sigma –Green belt

Designing, putting on service and managing 9 years whole logistics of implementation a national network for 10 billion clients

I am flexible, reliable, company oriented, team player. I am fluent in French as well as English and I have learn Spanish.

Installation, Testing and Comissioning of various SCADA and Telecommunication related equipments

Seeking expatriate position

My Q-HSE management experience spans more than 20 years and includes a broad spectrum from that of worker, public safety officer and emergency responder to educator, consultant and civilian contractor to both construction and general industry clients, including 21 months in Afghanistan.

HSSE Management System Coordinator / Sales / International Buyer

Thermo-Energy Engineer

Technical Author, Trainer, Project Manager

Broad experience of oilfield infrastructure, water,sewage treatment , gas turbine stations, oil pipelines, rig sites, industrial building, housing, earthworks, rail & general civil, mechanical & electrical works in UK, Africa & Asia. Project and Site Management in a variety of challenging locations

Metallurgist/Mill Engineer, Grinding/Flotation/Cyanidation/Solvent-Extraction/Electrowinning

manager

17 year experience in environmental management as Head - EHS and GM (Env. Tech) in large environment consulting and waste management co

Qualified, results-producing Management Professional with experience steering and directing all aspects of operations, administration, budgeting, and equipment maintenance. Successful in managing multiple projects with compelling priorities involving program development.

PIPE DESIGNER, More than twenty-five years experience in Technical drafting, piping and equipment hands on field work in the Chemical Manufacturing environment.

PhD chemical engineering, 15 years experience as operations and academic teaching

Camp Catering & Facilities Management, Remote Sites(Catering Degree, Hygiene Diploma, HACCP Training Cert)

Well-rounded professional with 15+ years experience in areas of: Project Management, Operations, Product Development and Engineering

Experienced Equipment and Packaging Field Service Technician seeking a position in Technical, Mechanical, or Packaging Field.

Desalination Plant Maintenance/Inspection, Materials Testing, Technical Evaluation,Troubleshooting, Supervisory/Managerial Skills

Seeking a responsible and challenging growth oriented position in the field of electrical engineering with emphasis on high voltage out-door substations including its preliminary design, selection of transformers, switchgears and other materials

Plant Manager, Quality Manager, Industrial Engineer

Electronic/ Mechanical Tech

Safety, Environment, Industrial Hygiene, Loss Prevention, Security Program Management

An experienced engineering manager, project manager, and program manager with Department and Division operations experience at engineering and construction, and consulting firms. Experience in multi-disciplinary infrastructure projects and environmental remediation.

Water & Wastewater Specialist searching for a challenging position overseas.

safety and environmental protection

Chemical Engineer, Project and Quality-Security-Environmental Management

I am looking for a job as Technical Manager / Supervisor for heavy machines worldwide

Key word : Power Plant Engineer, Boiler Operation Engineer, Boiler Maintenance Engineer, Turbine Operation Engineer, Turbine Maintenance Engineer,Field Service Engineer, Field Supervisor, Boiler Estimate Engineer, Boiler Shift Supervisor, Boiler Operator,Boiler Performance Engineer,Start up Engineer

Exploration, Prospecting,Quality Control,Mapping,Surpac Mine Planning software, survey & Autocad

My qualifications include City & Guilds Chemical Plant Operation, ONC & HNC Mechanical & Production Engineering. Refinery Operations/Commissioning/Planning/Inspection and Safety roles

degree in environmental sciences ,curntly employed as a ems co-ordinator, have previous experience in mining

International Engineer and MBA.

mining foreman and operator: 11 years experience; Mine operator Certification; Miner's Safety Training Fire and Aide Crew; Emergency Medical Technician; Experience running hydraulic excavators, motor graders, bull dozers, front end loaders, electric shovels, etc...surface mining

Fifteen years experience in management, manufacturing and engineering with emphasis on quality assurance, environmental and safety.

Knowledge of engineering theories and practices and an understanding of environmental principles involves with exploration, drilling, production and development operations.

HSE

Professionally qualified and highly experienced mechanical engineer offering 25 years experience in managing operations & maintenance of real estate properties (facilities management) and electro-mechanical projects.

Very flexible, Diverse experience. Looking for a place to excel.

Construction Management/Estimating/Supt/PM

Electrical engineer, Constraction, Control & Instrument, Coal, Oil & Gas projects,

Chief Enineer, Limited, Oceans, Unlimited HP

I have been working in the Safety, Health and Environmental (SHE) field for more than 9 years. Throughout these years I have been exposed to various SHE related requirements and problems. One of my key competency area will be managing workplace day-to-day safety, health and environment issues and

I am seeking Medical Advisor/Occupational Health position to continue my occupational physician’s career with a multinational company.

Western IT and data networking expertise. Enterprise and Telecom experience. PMP holder

My areas of expertise are production, short-term planning and project management. I am a troubleshooter and leader that use influence to get things done

1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out