Resume - Pursuing Master’s in Material Science & Engineering at Michigan Technological Un...

Misco Jobs

Resume #9401

CONTACT INFORMATION:
View contact information...

OBJECTIVE
Looking for an Internship/Co-op in a good organization that will effectively utilize my technical, leadership and organizational skills.

EDUCATION
* Pursuing Master's in Material Science & Engineering at Michigan Technological University, Houghton MI(May 2006)
* Punjab Engineering College (PEC), Chandigarh, India (July, 1998- June, 2002)
Bachelor of Metallurgical Engineering with 72.08% marks.

EMPLOYMENT
* Jindal Stainless Ltd., Hisar, Haryana, India (From October. 2002 –July 2004)
(Jindal Stainless Limited, a $ 417 Million plus ISO: 9001, ISO: 14001 & OHSAS 18001 company is India's largest producer of Stainless Steel)
* Responsible for handling the shift of 8 hours in Steel Melting Shop
* Responsible for TPM, ISO:9001, EMS:14001 and OHSAS 18001
* Responsible for Evaluating Cost of poor quality every month
* Exposure to Six-Sigma.

HONORS
* B.E Project adjudged best in the department of Metallurgical Engineering, Punjab Engineering College among 40 students and was published in the city edition of a Leading English Daily of India.
* 2nd runner up in national level technical paper contest held in PEC, Chandigarh.

INTERNSHIPS
* DCM Engineering Products, Ropar (Panjab), India (June, 2001 – July, 2001)
Undergone in-plant training in QS-9000 Automotive Gray Iron Foundry. Worked in induction furnace, quality labs, and mould preparation shop and on Spectrometer.
* Visakhapatnam Steel Plant, Visakhapatnam, India (Jun., 2000- July, 2000)
Worked in 'Quality Assurance and Technology Development' labs. of various depts. to test and analyze the various raw materials, semi- finished goods and finished goods as well as visited all the shop floors.

EXTRA CURRICULAR ACTIVITIES
* Participated in All India Quiz Contest in 1995.
* Participated in All India General Knowledge Test conducted by USO (VEC for the United Nations).
* Member of NSS society of PEC throughout the degree course (1998-2002)
* Member of Dramatics Club of PEC. (2001-2002)

SKILLS
* Windows
* MS Office (Word, Excel, Power Point)

SUMMARY OF RESEARCH ACTIVITIES

1. Improvement project titled "Increase in AOD (Argon oxygen decarburization) refractory lining life": I was the member of the project team at Jindal Stainless Ltd. we as a team improved the lining life of AOD vessel by 20% in the span of six months using six-sigma methodology.

2. B.E. Project titled "Production of Small Auto Parts through Swarf Forging": Manufactured small auto parts like hub, bushes, rough forging of gear, etc. through a corollary of powder metallurgy technique. Process utilizes industrial wastes like metal turnings of mild steel, hacksaw cuttings and then converting it into a solid compact by applying gradually increasing pressure. The compact was then hot forged to get a homogenized product. It was then given a final shape by machining if required. The properties of the product obtained like hardness, tensile strength, elongation, microstructure etc. were comparable to the conventional method of casting, rolling and machining. Project was published in city edition of National English Daily of India (The Indian Express). The technique saves approximately 25% of the cost as compared to the conventional route besides other advantages like environmental friendly, energy conservation & material conservation.

3. Summer project titled "Chrome Plating": Literature review of various types of chrome plating like soft, industrial & alloyed, physical & chemical properties of chrome, process of chrome plating, tests of chromium deposit and it's applications.

4. "Shape Memory Alloys": Studied the history, formation, crystallography and the thermo-
mechanical behavior of various shape memory alloys. These alloys are finding use in force actuators, in proportional control and also in super elastic applications. The paper discussed commercial shape memory alloys like Ni-Ti & copper base alloys in detail. The paper also discussed the future prospects of shape memory alloys in medical industry & in actuator devices. It also discussed the research work on iron base shape memory alloys, which can have better properties than the conventional ones.

5. "Ceramic Matrix Composites": The paper discusses the advantages & importance of ceramic matrix composites over the ceramic materials. Literature gives the information about various types of ceramics like silica, alumina, mullite, etc., their properties, advantages and most importantly their limitations, which leads to the need of ceramic matrix composites. Paper gives the details of various processes like hot pressing, reaction bonding process, liquid infiltration, and gel casting to get CMC's. Paper also discusses typical CMC's like zirconia-toughened alumina, SiC whisker reinforced composite, their properties and applications.

6. "Gray Iron- A unique Engineering Material": Paper gives information regarding the unique properties of gray iron which makes it versatile of all foundry metals. Paper gives details about metallurgy, composition, mechanical properties, heat treatment & machining of gray iron.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 751 to 800 of 837)

Go to Search Parameters...

Brief Description

Dual masters degree in mechanical and manufacturing engineering

General computer repair, uasage, modification skills.

Engineer seeking Challenging job

I am a Geologist with 5 years of experience in one of the Asia's best exploration and production petroleum company - ONGC. I am willing to relocate and have an ability to work for the organisation with full efforts.

Information Technology, IT Operations & Implementations Regional Manager

Experinced Pre-commissioning, Commissioning, Completions and Handover Coordination. Additional experience in Human Resources.

I am a material planning professional with extensive experience in Production Planning, Scheduling, Inventory and Materials control, Document controlling and Purchasing.

As listed on my resume I have experience in landfill remediation and operation, groundwater quality analysis, groundwater sampling, oversight, knowledge of environmental regulations and investigations, plan and report preparation and experience in performing site investigations to assess hydro-geolo

Over ten years experience in providing the highest level of consumer and business-level client satisfaction, by performing a variety of assignments including: customer call functions, technical support, solving billing issues

11 years experience in running met Labs and Labs and supervising them as well

FAA airframe and powerplant certified, BS and AS in Aviation Maintenance Science / Management AOC

Project Geophysicist (Mineral Exploration)

To be a part of your esteemed organization and prove myself dedicated, worthful and energetic in Mining and Reliability Engineering, that gives me scope to apply my knowledge and skills to the best and dynamically work towards the success and growth of the organization.

I am a qualified and experienced safety professional/officer.

Competent Instruments/Production Technician

Class A CDL, railroad equipment ie. spotter truck tandem dump truck, front end loader, fork lift, assorted types, sizes and hp tractors & mowers, snow removal, emergency & on call & work in extreme and inclement weather conditions, wiring, installation & preliminary programming of traffic signals.

I am a fresh passed out Chemical Engg (H) Graduate from one of the best universities of India i.e Kurukshetra university with 76.5% marks.

Bilingual Entry Level I&C Engineer

Geologist/Engineer, 4 years in environmental and information technology. Degreed in earth science and networking. Team oriented project management and support. Involvement: four mine development projects and hazardous materials. Desire a contract or permanent position.

Implementation of H.S.E. policies on and off project sites, Knowledge of fire prevention and safety practices, Field sampling for all Environmental studies, ability to make accident investigations and prepare reports, good administrative & Environmental quality management skill, good teamwork spirit

Field engineer

Experienced in purchasing, buying, and expediting

Looking for o job with better condittions

Holder of BMin.Scie Degree, with two years metallurgical engineering experience in the copper mining industry, and conversant with various mineral processing, hydro, and electro-metallurgical processes. Possess good technical aptitude and skills. Hardworking, results-oriented.

AutoCAD "2D, 3D", Customer Service, Microsoft Office, Car Supervisor Engineer etc

Pursuing Master’s in Material Science & Engineering at Michigan Technological University, Houghton MI(May 2006)

BTech Electronics and Communication Engineer, 3 yrs exp in Power Substation Operation, Having PG Diploma in Advanced Computing, Knowledge of PLC and SCADA Programming and Applications.

Emergency fire rescue etc. Licence in France and followed of a large experience in overseas

I am a mining professional seeking expat opportunities (Contract or Permanent) in either a production or technical field. The majority of my experience has been in mining; with a technical background in Mine Surveying, and experience in Drill and Blast Engineering and Site Engineering.

Hard working, dependable, adventurous

I am an EH&S specialist to energy, industrial and commercial clients. I have experience in soil & water sampling, soil conservation, erosion control, remedation, reclamation of oilfield sites, environmental liability models, management systems and emergency response. I am an registered P. Biol.

Mechanical Engineering Technologist

Graduate Mechanical Engineering

Forensic reviewing and reporting, 2 years engineering pipeline company, 4 years government drugs screening laboratory, GC/MS, 10+ years non wizardry speech freedom computer environment

Pursuing MBA Marketing. Completed BE Mechanical good at convincing people, selling skills, etc, good at computers, good communication skills

Petroleum Engineer & Geologist with strong knowledge and experience working for Oil & Gas companies, Oilfield Services and Engineering & Construction Companies.

Experience in construction and as a trades assistant to carpenters, builders, electricians, bricklayers. Have exerience in cold and hot work forklift scissor lifts confined spaces looking for a career in mining

Senior Instrument Technician / Foreman "Experience: 10+years", working with one of the largest refinary in middal east.

BA-degree in Geosciences ( 4 years) graduated in 2000

Certified Public Accountant - Feb 2004, Bachelor of Business Adminstration - 1998

Computer Programmer, Database Administrator, System Analyst

Facilities and Administration

My academic experience, focusing on health and the environment, and my professional experiences, have enabled me to gain good problem solving and team working skills, as well as the communication, negotiation and persuasion skills required to succeed in missions in the environmental sector.

GIS / IT professional with experience in application development and relational databas. GIS Technologist with experience in ESRI ArcGIS 9.0, and ArcIMS.

An organized, experienced, self-motivated individual, seeking an opportunity to work within an organization where quality and commitment to excellence are valued as well as to be a contributing team member where my abilities and experience can be a significant factor in achieving company goals.

Proven Experince in Sales and Marketing,

I am a trained Geologist. I am versed in working in the field. I can work well under minimum supervision. I am honest, deligent and keen to progress. I am a team player. It is best to reach me by E-Mail

My leadership ability and my training on various Heavy Equipment.

I am an Advanced Rigger of 2 years experience. I have a variety of skills including Steel erection, underground work, Franna operator and Heavy lift. I am currently employed as a Heavy lift rigger for mammoet. I am skilled in all aspects of rigging including plan/ lift study reading and dual lifts.

Petroleum Technologist, Technical Support, Electrical Engineer, Oil & Gas Analyst

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [ 16 ] 17

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out