Resume - My background is varied in both in education and 'hands on'. I currently hold a ...

Misco Jobs

Resume #26905

CONTACT INFORMATION:
View contact information...

EXPERIENCE:
WRS Infrastructure & Environment. Tallahassee, Fl.
Field Inspector on Florida Department of Environmental Protection funded soil and groundwater remediation projects resulting from petroleum contamination. Verified field activities conducted in accordance with department statues. Areas of oversight include but are not limited to groundwater sampling, well installations, soil removal and replacement, above and underground storage tank removals and installations.
All activities documented with Field Journals, written and photographic reports.
Collecting of groundwater samples for lab analysis using industry standard equipment including purge volume calculations.
Current 40hr HazMat and 10hr OSHA

Water Resource and Prospecting Consultants, Fort Worth, TX
Project Manager on a multi-million dollar leak detection system for the Las Vegas Valley
Water District. Oversaw all phases of the project including but not limited to supervision of district personnel, organization of information from various sources to construct an efficient installation pattern of individual units through the city to ensure successful completion of the project.

Power Engineers, Hailey, ID
Environmental Field Engineer/ Monitor for multi-million dollar cross-country fiber optic line installation. Interfaced with general construction contractor and other interested agency representatives to ensure environmental compliance as specified within construction guidelines. Supervised crews in multiple phases of reclamation followed by inspection from a US Forest Service representative to ensure all areas were reclaimed to U.S.F.S. standards with written approval. Created and maintained digital journals on construction activities in addition to a written daily log.

Lockheed Missiles & Space, Sunnyvale, CA
Designed remote computer sites including conduit layouts and power requirements while coordinating with outside contractors. Troubleshoot various types of equipment including logic boards, power supplies and disk drives.
EBI/Secret clearance

Intel Corporation, Santa Clara, CA
Maintained various types of fabrication equipment used in the manufacturing of computer chips. These machines using both high voltage and high vacuum.
Installed electrical feeders to wafer fabrication equipment. Maintained A/C units and other building support equipment.

Pensacola Electrical Apprenticeship, Pensacola, Fl
All phases of electrical construction in both commercial and industrial construction projects.
Construction activities included conduit runs, installation of main power feeders and
Motor Control Centers. and switch gear. Mounting and connection of electrical sub panels wire pulling, installation of switches receptacles and lights.

EDUCATION:
University of Idaho, Moscow, ID
Mathematics/ Physics

Lewis-Clark State College, Lewiston, ID
B.S. Interdisciplinary Studies (Dean's List)
Natural Science/ Math/ Physics/Hydrology

Pensacola Jr. College, Pensacola, FL
A.S. Electronics (President's List)

PUBLICATIONS:
Contributing author: General Construction Techniques and Environmental Considerations in Fiber Optic Installations, Presented at the U.S. Forest Service/ BLM National Lands Academy.
National Training Center, Phoenix, AZ. April, 2002.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 556)

Go to Search Parameters...

Brief Description

CMIOSH - Sr. Industrial Hygienist : Expertise in writing & implementing OH Procedures, conducting HSE Training, Inspection, Audits, Risk & Industrial hygiene Exposure Assessment & Monitoring etc. Able to work with little guidance, hold good inter-personal relations & transparent communication skill.

Electrical systems testing, quality control, repairs, troubleshooting, electronics, component design, and/or training and development

Projects Management / Technology Consultant / Business Development & Management of Information Systems

My background is varied in both in education and 'hands on'. I currently hold a B.S. in Natural Science and an A.S. in Electronics, In the areas of 'hands on', my background includes but is not limited to maintenance on various types of equipment.

a young engineer who has versatile knowledge in mechanical engineering , marine engineering and electrical wiring/installation(domestic and industrial)

Confident to handle the construction and quality control activities as specified in the Drawings and applicable standards and specifications.Familiar with Material Inspection, dimensional check and documentation as per Construction Materials Standards such as ASTM / ASME SA 106, SA 515, SA 516etc.

Skills: electronics mech (technician) S.M.t component repairing and touch up through whole component assemble, soldering work and production supervision , testing of electronics tuner with the help of oscilloscope, fault finding etc Qualification: Under Graduate and 2 year diploma in electronics

I am currently working with the National Environment Agency as an operation engineer in an incineration plant. Had obtain Degree in Electrical Engineering, and is a Australian PR

Recent MBA grad with spl in Asset Mgt; bachelors in IT;3 yrs wrk exp varied business segment

First Aid Attendant and Field Supervisor Familiar with drilling rig and service rig operations. Have some hours experience on a variety of machinery. Have proven abilities in first aid. Have proven leadership skills.

Im currently an engineer in ghana in africa for a caterpillar dealership working mainly on power generation all over ghana including 2 mine sites. My duties include breakdowns servicing and maintenance and major overhauls . I also teach locals and supervise them .

Biomedical Engineer

Strong character and leadership traits – Outstanding work ethic – Quick learner – Self motivated- Dedication to quality job performance- Highly professional attitude- 15 years of experience in a manufacturing production environment.

Experienced Underground Blaster w/ 13 + years Experience in Construction/Quarry

Procurement specialist in the Oil & gas Industry with 9 years experience of procurement/buying/contracts/expediting.

Geologist

A Senior Inspector with more than 20 years extensive offshore/onshore activity in the Oil, Gas, Petrochemical and Nuclear Industries

Rigger crane op scaf

20 years in the Navy I worked as a Supervisor/Quality Assurence/Electronics

QA/QC IN POWER, PIPE FITTER, STRUCTURAL FITTER, AND HEAVEY AND LIGHT EQUIPMENT OPERATOR

My experienced includes hydrocarbon analysis, pore pressure detection, lithology identification, and subsurface evaluation. Drilling experience on directional, sidetrack, vertical, and geosteering wells, with various drilling fluids, throughout the US and Gulf of Mexico.

Process/Electronic Technician

Mechanical technician - rotating equipment, pumps, compressors, heat exchangers, gas, petrochemical industry, valves offshore survival BOSIET. Hazardous area

Fire Fighter I & II (Accredited at SAESI), BAC (Registered at HPCSA)

Administration, Marketing, Operations & Computers

Timed served Mechanic with safety certification and good leadership skills

Oil & Gas Land Title, Leasing, Right of Way, Consulting & Reporting

Industrial Projects Management ,Purchase / Supply Chain Management,Business Development,,Material Management

I have completed CA - Inter and currently a Chartered Accountant - Finalist from Institute of Chartered Accountants of Pakistan. I am working with Ernst & Young Global Limited in Karachi office for the last 4 years and currently my designation is Senior Auditor.

Over 08 years experience in IT/IS with around 04 years of expereince in JD Edwards implementaion in technical and funtional role, proficient in coordinating overall project execution to ensure inter-project dependencies are properly identified and managed, familiarity with Project Management methodo

Senior project planner schedule with 12 years heavy industry and construction projects experience ,professional in using MS Project,Primavera P3&P5,MS office,CMMS systema like SAP R/3 , Maximo. Strong technical background , project management and cost control, contract and claim adminstration

Seasoned expat. Strong broad-based tech skills and extensive project O&M exp in frontier third world environments. Road const, water rehab, airports, infrastructure rehab. Extensive EPL/EPC exp as Project Eng.

Heavy Eqiupment Operator,Construction,

Ms-word,Ms-Excel,Proficient in management,General HSE certification, HSE Competency Development Course Level 3

If you need a dedicated expert heavy equipment/drill rigs/are welder/fab/design, hydraulics, air compressors, all around field/shop management, i can design/build & repair anything with or without a big budget, will work on contract are as needed!!

Cummins Sales & Service Pakistan (Power Generation)(Nov2007 – to date)Mining Experience(2004-2007):

Daily rotational positions including, Operation of Kranco over-head charge crane with 15 and 50 ton hoist, Kranco over-head make-up crane with load lifting magnet & clam shell bucket, Deck operations for 2 Brown Boveri 55 ton coreless furnaces

Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre-commissioning Engineer, Commissioning Engineer, Start-up Engineer, Process Engineer, Chemical Engineer

iosh managing safely and osha in construction safety and health qalified hse officer with 9 yrs experience in safety. other trainings attended: basic rescue, work safely at heights, scaffolding, first aid, fire fighting etc. work experience in india and middle east in construction projects.

Geology degree and Geology Honours degree. Two years exploration geology experience. Currently busy with Masters degree in Hydrogeology on part time basis. Working as geologists at Hydrogeology company.

Detail oriented Instrument and Controls technician seeking international opportunities

20 years experience in Industrial Electronics, Electrical,Mechanical, Pneumatics, Hydraulics

Involved in all construction activities including fabrication , installation and control off all structural items.Steel structural estimates include, pipe-racks, elevated pipe supports, pump shelters, access platforms, handrails, et

Mechanical Engineer, 12 Years Gulf Experience In Maintenance Department

I am a current registered EMT Paramedic Assessor and First Aid Instructor. I am now working in a local company as a Safety cum Fire Safety Manager. My responsibilities include coordinate and conduct training, investigate and writing incident report, ensure safety at workplace comply.

Dynamic Health & Safety Coordinator Looking For Work In Mining, Heavy Construction Or Oil Industry

im interested in doin marine and i spoke wel in english and i know hindi also and my specification is doin work in any circumstances

12 years experience in instrumentation mining processing plant.holder of a craft certifitecate in process control instrumentation.

Finance, Investment Banking, Management consulting

Experienced in construction and repair of recovery and power boilers, exchangers, vessels, light and heavy plate work, basic pipe and structural fitting, as well as work on mild steel, stainless, and aluminum.

1 2 3 4 5 6 7 [ 8 ] 9 10 11 12

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out