Resume - Electrician

Misco Jobs

Resume #29114

CONTACT INFORMATION:
View contact information...

PROFILE
Licensed Industrial Electrician, Industrial Mechanic Millwright and Electronics Service Technician, possessing an Associates Degree in Industrial / Commercial Electronics Technology, coupled with over 15 years of electro mechanic and electronic troubleshooting, test, maintenance and reliability experience. Enhanced knowledge of industrial controls, data analysis. Track record of success in executing large-scale projects involving implementation of integrated PLC/PC-based control systems, power distribution and troubleshooting diverse Motion Control Systems.

MAJOR PROJECTS
Fully Automated UV Electrical Systems for customers in North America, Europe, Asia, Australia: Pickering Ontario Nuclear Power Station, City of Mannheim, City of Winnipeg, E.L.Smith Water Authority, New York Water Authority, City of Tyrone Water Treatment, Lockheed Martin Corp. N.A.S.A. White Sands Water and Air treatment.

RELEVANT EXPERIENCE

CALGON CARBON CORPORATION 1999 - 2005
http://www.catalyticcarbon.com/ccc/index.html.
High purity water treatment for pharmaceutical and fermentation processing; brewing and bottling plan process waters; Environmental, for groundwater remediation of organics; Drinking water treatment; Industrial wastewater treatment, Process water for semiconductors.

Engineered Solutions Plant, Ultraviolet Water Disinfection Division, Pennsylvania
*Senior Test and Reliability Technician
Big Sandy Plant, Carbon Reactivation Division, Catlettsburg, Kentucky
*Industrial Maintenance Electrician and Mechanic
Advanced Oxidation Technologies, Markham, Ontario (UV Division relocated in PA)
*Electric/Electronic/Assembly Service and Test Technician

TROUBLESHOOTING AND SERVICE DUTIES:
- Read, interpret and revise schematic drawings and documentation. Final assembly, quality control, start-up, test, calibration, troubleshooting and maintenance of fully automated water disinfection systems. Responsible for ensuring proper assembly and operation of each unit prior to shipment to the customer. Verify that the equipment assembly conforms to the required electrical codes (NEC, CSA, NFPA 79 and UL508). Initiate Engineering Changing Orders
- Design, layout and install electrical control panels for specialized functions, as required to update and improve existing equipment. Assemble integrated test units from module level for test execution. Assemble electrical test setups from industry standard equipment to perform all required tests on development type units - setup & operate data acquisition systems for test data capture.
- Investigate product non-conformances and assist Design Engineers to identify root causes.
- Work with the R&D team to develop next generation high performance systems in order to resolve design or quality problems. Ability to use software diagnostic tools.
- Test, diagnose troubleshoot and observe electrical, electronic and mechanical components and systems using testing and measuring instruments. Correct wiring errors, calibrate DC drive boards, scale analog sensors, check PLC I/O points, measure harmonics and three phase power quality, and collect other test data for the equipment summary report. Replace or recondition components, disassemble defective units and repair or replace worn or suspect parts. Install, maintain and troubleshoot high, low and DC voltage power distribution systems, lighting and services for the manufacturing facility as required; AC/DC protective devices, transformers, grounding systems, emergency power back-up systems.
- Carry out preventative maintenance programs to ensure proper machine performance keeping required maintenance records.
- Perform internal and external training with customers and new employees for electro mechanical assembly, testing and observe safe practices at all times in the performance of work duties. Maintain a well-organized, safe working environment that is essential in a manufacturing workplace with the presence of high voltages and water.
- Provide assistance on all safety related problems and on all production equipment, to correct any hazardous conditions and maintain a well organized, safe working environment according to recognized electrical practices and in compliance with Canadian Electrical Code, National Fire Protection Association and OSHA.

CANADA BREAD TORONTO, CANADA
http://www.mapleleaf.com/aboutus/bakery.aspx
1999 - 2000

Maintenance Electrician and Mechanic (Part time / Weekends, and Full time / Second shift)

TROUBLESHOOTING AND SERVICE DUTIES:
- Install, examine, replace, troubleshoot, repair and maintain PLC's, electrical / electronic control systems and mechanical related devices for industrial food processing and packaging equipment using testing and measuring instruments. Read and interpret drawings, blueprints, schematics to determine layout of industrial electrical and mechanical equipment / machine installations.
- Experienced in automation: Texas Instruments, Allen Bradley, Direct Logic and Siemens PLC's with strong mechanical aptitude – In charge of three high-speed food processing equipment lines including: conveyor systems, dough mixer, divider, rounder, proffer, oven, slicing, freezing, heat-sealing, metal detecting, vacuum and high-speed packaging, labeling and palletizing systems. Disassemble defective units and repair or replace worn or suspect parts. Trouble shooting and repairing AC & DC drives down to components levels. Analyze, test, and design data; develop or prepare schematics, designs, specifications, parts lists or make recommendations regarding these items. Review designs and specifications for adequacy and improvement. Install and repair electrical systems, apparatus, and electrical and electronic equipment by following Canadian Electrical Code, manual, schematic diagrams, blueprints, and using power tools, and electrical and electronic test equipment. Made minor programming changes and modifications as required.
- Performed dielectric measurements on AC/DC motors and other various electrical devices to determine the wiring condition and to ensure that current leakage is in with acceptable levels.
- Worked with production personnel as required, made decisions and prioritize jobs to production requirements.
- Carry out preventative maintenance programs to ensure proper machine performance keeping required maintenance records. Maintained and upgraded all plant equipment to Canadian Electrical Code.

STANDARD MODERN MACHINE TOOLS
http://www.standard-modern.com /CNC.html
1997 - 1999

CNC Industrial Electrician and Maintenance Electrician and Mechanic

TROUBLESHOOTING AND SERVICE DUTIES
- Responsible for electrical operations and maintenance activities.
- Test, diagnose, repair and observe electrical, electronic and mechanical components and systems.
- Supervised electrical assembly team members. Trained new employees and observed safe practices at all times in the performance of work duties. Performed maintenance activities.
- Gained experience in complete design and manufacturing process of, standard and computerized machines in compliance with Canadian Electrical Code and National Fire Protection Association.
- Worked with engineers to both improve and research new CNC machinery. Provided design support.
- Wired and tested electrical panels with diverse combinations of motion controls (Kollmorgen, Allen Bradley, Fanuc, Autocon, Fagor, Vikers, Milltronics, and brushless servo amplifiers: Kollmorgen Servostar, Custom Servo Motors, Yaskawa ).
- Installed, maintained and repaired AC/DC motors and generators, lubrification pumps/systems, mechanical, electrical alignment and auxiliary protective equipment, spindle motors, pneumatic chuck, breaking and clutch systems, automate tool changer, solenoid valves, grinder, digital readouts, transducers, sensors, encoders.
- Performed warranty, service and troubleshooting of electrical equipment in Canada and USA.

REALSTAR MANAGEMENT COMPANY TORONTO, CANADA 1996 - 1997
http://www.realstar.ca/renpro/renPropertyDetail.asp?country=1&province=12&city=57&propertyId=107

Maintenance Electrician and Mechanic

- Responsible for the operation, preventive maintenance and repair of tower building-systems equipment and facilities (Air conditioning, chillers, boilers, ventilation, dust collectors, lighting, elevators, water systems, swimming pool, TV's, audio/video systems, fire and alarm systems, emergency diesel power generators.)

WORK EXPERIENCE IN EUROPE 1978 - 1996
http://www.roumanie.com/magazine/economie/no15/consta_e.htm

TECHNOTON SERVICE ROMANIA, CONSTANTA SHIPYARD AND HARBOUR
http://profitromania.com/det_comp.php?id=848
Certified Electronics Service Technician

- Provided technical service on hazard detection systems. Repairs, calibration and start up of high temperature detection systems often used in the commercial, industrial and marine applications.
- Used a variety of measurement techniques and test equipment in checking electrical, electronic and data circuits. Diagnose and correct various electric and electronic failures.
- Troubleshot to component level electronic systems, radio receivers, audio, video, television and other professional electronic circuit boards for industrial, marine, hospital and consumer use.
- Commissioning new electronic equipment for 3 shipyards at Constanta, Midia and Mangalia for oil tankers and ferryboat ships with a maximum of 250,000 tones (deadweight).

PETROMAR - MARINE RIGS FOR DRILLING AND OIL EXTRACTION - BLACK SEA
http://www.compositecatalog.com/infocenter/RIG_DETAIL.asp?A=NAMETODETAIL&RIG_ID=297
Licensed Marine Electrician (Endorsed by The Geneva Convention)

- Preventive and predictive electrical maintenance for marine electrical equipment: AC/DC power generators, prime movers, rotary tables, draw works, self-elevating jack-up systems, heliport, etc. Mechanical repairs.
- Repairs and calibration of hazard detection systems.
- Troubleshot to component level marine electric/electronic equipment for geological research.
- Carry out preventive maintenance program on electrical equipment

CONSTANTA MUNICIPAL POWER PRODUCTION AND DISTRIBUTION
CITY OF CONSTANTA WATER TREATMENT AUTHORITY
Licensed Electrician for Power Distribution Stations and Electrical Network.

- Field testing and maintenance, installation, troubleshot and repair: distribution equipment, circuit breakers; transformers, protective relays, switchgear, motor controls and associated substation apparatus.
- Performed AC/DC hi-potential testing, power factor testing, time motion analysis, turns ratio and protective relay testing.

EDUCATION & PROFESSIONAL DEVELOPMENT

Industrial Electrician License (Red Seal).
Provincial and Interprovincial Standards Certification - Toronto, Ontario, Canada (2004)

Industrial Mechanic Millwright License (Red Seal).
Provincial and Interprovincial Standards Certification - Toronto, Ontario, Canada (2004)

Electrical Technician and Assembly Technician Certification.
Associates Degree in Electrical and Electronics Technology
United States Department of Labor, Employment and Training Administration
Philadelphia, Pennsylvania, USA (2002)

Marine Electrician International Certification (Geneva Convention Seal)
Marine Training Center, Constanta Harbor, Romania (1985)

Electrical/Electronic Technologist Diploma
College of Technology and Engineering, Constanta, Romania (1981-1983)
Marine Training Center, Constanta, Romania (1984)

Electrician for Power Stations and Electrical Network Diploma
Constanta, Romania (1978)

TRAINING COURSES

National Electrical Code Theory - Certificate of Completion
CJL Engineering, Pittsburgh, Pennsylvania, USA (2004)

Robotics Technology, Programmable Logic Controllers
Community College of Allegheny County, Pittsburgh, Pa. USA (2002)

Advanced electrical applications, theory, concepts, and practices.
National Electrical Code, NFPA 79 - 2000 Edition
Community College of Allegheny County, Pittsburgh, Pa. USA (2001)

Canadian Standards Association, Electrical Code Theory
George Brown College, Toronto, Ontario, Canada (1997)

COMPUTER SKILLS
Operating Systems: Win 98, WinNT, Win 2000 Pro, Win XP Pro
Software Packages: MS Excel, Word, AutoCAD, Direct Logic, RS Logics 500.
Power Quality Analyzers: Hioki, Walhalla, Amprobe, HarmonaLink, Fluke RPM.

INVENTION - Thermal self-adjusting assembly for UV Lamps (Patent is pending)

REFERENCE LETTERS are available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 557)

Go to Search Parameters...

Brief Description

Electronic/ Mechanical Tech

Water & Wastewater Specialist searching for a challenging position overseas.

Professional Contract Chef / EMR Available

I am currently working in an Offshore Vessel as an Electrician. I've worked experienced in Petro-Chemical Plant in Saudi & CHEVRON, Angola Africa as Maintenance Electrician. I am a Registered Master Electrician with PRC Licensed no. 0023265. I am currently looking for a job.

Very experienced Welder, Pipe fitter, Foreman

Fifteen years experience in management, manufacturing and engineering with emphasis on quality assurance, environmental and safety.

Construction Management/Estimating/Supt/PM

I am seeking Medical Advisor/Occupational Health position to continue my occupational physician’s career with a multinational company.

Welder Fitter, with pressure certification (F3/F4 on 5G uphill progression -mild steel). Worked in fabricating shop on commercial and industrial products. Very proficient with GMAW and SMAW. Little experience with GTAW. Worked mostly mild still and some alloy. Little aluminum experience.

Journeyman Industrial Electrician , Apprentice Instrumentation Mechanic / PLC , DCS, HMI, SCADA . Underground / Surface, Oil and Gas, Mining

Environmental pre-construction surveys for wetlands, streams, and wildlife habitat; knowledge of wetland plants, soils, and delineation rules as well as general ecological knowledge. 10 years of experience on pipeline projects.

Fully qualified safety proffesional, with extensive experience in the construction industry, Rigging & Lifting Supervisor and Qualified Engineer please review CV for all qualifications & working background

ISO Implementation, Documents, Records, Archival Management, QA Manager, Writing Technical Documents, Auditor

Rotating & reciprocating equipment technician

I have 7 years experience of electrical installation onshore and offshore Oil / Gas Industry complemented with a 4-year recognized apprenticeship.

Professional Land Surveyor

International Operations- Foreman, Diamond Driller, RC Driller, Long Hole Driller, Blaster etc.

Sales, Engineering Project Manager

Project Manager, Field Engineer, Commissioning Electrical Switchgear

Have been a rigger/ironworker for 10 years+. Have experience in welding and have done this on/off for 8 years.

Qualified, results-producing Emergency Management Professional with experience steering and directing all aspects of operations, administration, budgeting, and equipment maintenance. Successful in managing multiple projects with compelling priorities involving program development.

Project Manager - Sales - Technical

Mining Engineer with 20+ years experience, Supervisor of Drilling Crews, great work ethic, will meet deadlines and bottom line, effective team builder

Graduate Botanist, four year science degree, environmental consultancy, surveying, vegetation analysis, climate studies, administration,

Extensive skills in composites, operations management, plant management, as well as manufacturing of high speed offshore vessels.

Technical Project Manager

Quailty Coordinator, Welding Specialist, Safety Training Coordinator, Operations Coordinator Prefer Former CIS Russia, Kazakhstan

My two and a half years experience working in the mining atmosphere in the Morenci Mine repairing and maintaining CAT equipment and haul trucks coupled with my interest and passion for heavy duty mechanics will hopefully align well with what you are looking for.

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Project Management / Inspection / Procurement / Quality Assurance

Concrete plant operator, concrete mixer driver, semi-dump truck and some flatbed experience. Also site supervisor with end loader and skid steer experience. Many years of welding, machining, and maintenance duties.

I am working with Gujarat Narmada valley Fertiliser company ltd which is a fertilizer and petrochemical complex and produces Ammonia, Urea, Acetic acid, Formic acid, Weak Nitric acid, Concentrated nitric acid, Ammonium Nitro phosphate, Calcium ammonium Nitrate, Aniline, TDI, Methanol.

Oil and Gas Plant Superintendent / On Shore or Off Shore Production Supervisor / Senior Process Technician / Marine Terminal Supervisor, SIMOPs Coordinator / PTW Coordinator

US Air Force and Old Dominion Freight, Inc. (Over The Road Operator in 51 of 52 States, excluding Hawaii)

Maintenance, water purification, reverse osmosis, materials, logistics, management

Electrician - Certified

Experienced Design Engineer

An experienced security professional with 24 years of strong corporate security and law enforcement qualifications who has demonstrated a high level of success in a variety of significant and highly critical assignments in a fast paced environment. Also has an impressive track record of hands-on exp

Channel sales, Institutional sales, Oem sales, Business development, International sales

Repair and Maintenance, Product Quality Analyst, electrical fault analysis, acceptance testing, interpret drawings and schematics, advanced vibration, reliability growth testing, precise measuring equipment, tester platforms (Teradyne, Polaris, Fusion), power supply adjustment and replacement

Software Developer .NET, Java SQL

As a skilled excavator operator in most fields presently holding CPCS operators card at NVQ level

Contracts Manager

Quality, Safety, Health, Environment and Security Professional w/ 17+ years in International upstream and downstream O&G sectors

Assisant professor, PhD environmental biotechnology, expert in biological treatment of hazardous contaminants.

Company Oriented,Safety Is #1 And Very Hard Working

Looking for management position in mineral (gold and precious metals) exploration and environmental engineering consulting.

Previous warehouse work..good hard worker ,fast learner

12 Years Maritime Experience • Crew Training and Management implementing. Marine Safety, Salvage, Port and Offshore Operations • Policy and Procedure Enforcement/Compliance

Project Manager/Construction Supervisor/Contracts Manager/Claims Manager/Cost Engineer/Construction Manager/Site Supervisor/Civil Engineer/Quantity Surveyor etc.,

1 2 [ 3 ] 4 5 6 7 8 9 10 11 12

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out