Resume - I am currently working in an Offshore Vessel as an Electrician. I've worked exp...

Misco Jobs

Resume #31198

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVES: To have a challenging, rewarding and promising job as an Electrician.

Work Status: Currently employed in an Offshore Vessel.

EMPLOYMENT HISTORY:
September 2006 to Present GPS Saipem ENI Group
(Platform & Pipe laying Offshore Project)
Saipem DLV (Derick/Lay Vessel)
Castoro Otto

Position: Electrician)

* Synchronizing Powered Diesel AC Generator with PLC control rated 4200 HP, 5.5 KV for Vessel Power Supply.
* Monitoring MW Meters (Active Power), Excitation Current, Stator Current, RPM, instrument temperatures & pressure sensors.
* Hands-on trouble shooting of AC Generators and maintenance of electrical controls and other equipments such as Steam Boiler, Evaporator, Air-compressors, Bilge pumps, Actuator valve magnetic sensor, Incinerator, Fire pumps, Fuel transfer pumps, Water feed pumps, Oil & Water Separator, etc.
* Calibration of Pressure Switches.

February 2004 – Present Al-SUWAIDI INDUSTRIAL SERVICES
Project assigned to Saudi Petrochemical Company
(SADAF/ SABIC)
Location: Jubail, Kingdom of Saudi Arabia
Position: (Electrical Technician)

* Hands-on trouble shooting and maintenance of electrical controls and its electrical equipments even on hazardous location such as Industrial motor AC/DC.
* Performed Preventive Maintenance with Lockout/Tag-out (LOTO) procedures on motor control panels. Including MCC's, Switchgears, Motor Starter Breakers, UPS batteries & its chargers. Subsystems lightings and other control panel boards.
* Assist Engineering Utility personnel during trouble shooting and preventive maintenance of medium and high voltages e.g. 4160 V & 13.8 KV especially during turn around or shutdown activities.
* Performed functional testing in coordination with Instrument Technicians.
* Performed calibration using a current injector on overload relays and contact resistances testing. Also using Surge Comparison Tester, Megger or Insulation Resistance Meter and Multi-tester.
* Experienced on Variable Frequency Drive (VFD), SCR, PLC installation, Power diesel Generator and Motorized Operated Valves (MOV).
* Performed other related duties that maybe assigned from time to time.

July 3, 2001 – August 21, 2002 URBANA 2000
Project: Chevron Texaco (Oil & Gas)
Location: Malongo, Cabinda, Angola Africa
Position: (Industrial Electrician)

* Perform scheduled maintenance (corrective & preventive) on electrical systems.
* Hands-on troubleshooting & repair of electrical equipments.
* Perform scheduled maintenance (corrective & preventive) on electrical systems.
* Perform disassembly, inspection, repair, reassembly, adjustment, testing and calibration of electrical equipment and systems in accordance with pertinent technical manuals, drawings, manufacturer's specifications and standards.
* Diagnose and troubleshoot electrical problems.
* Requisition of necessary spare parts, tools and materials.
* Maintenance of low, medium voltage switchgears and breakers and cathodic protection systems.
* Ensure that all protective and emergency systems are functional and that all tasks are performed in accordance with pertinent electrical safety standards.
* Compliance with Common Maintenance Strategy (CMS).

November 1998 – June 2001 JTL CONSTRUCTION
Project: House & Building Wiring Installation
Location: Philippines
Position: (Building Electrician)

* Lay electrical pipes, cable pulling, Threading/bending of pipes
Such as Emt, IMC and RSCP.
* Install power Panel board, Junction/utility box, pull box, isolator switch, breakers,
Convenience outlet, switches and service entrance.
* Wiring installation, cable pulling and splicing of power & lightings.

February 1997 – October 1998 METITO ARABIA INDUSTRIES, LTD.
Project: Water Treatment Plant & Sewage Treatment Plant.
Location: Kingdom of Saudi Arabia
Position: (Electrical Technician)

* Erection of sewage & water treatment plant (reverse osmosis)
* Lay power cable; install cable tray/gutter, threading/bending of pipes, wiring & Installation of main & local control panel boards.
* Install float level switches, control panel boards high pressures pump, aerator pump, control valves, membrane & ultra violet ozone machine.
* Erection of raw water tank & potable water tank
* Loading Media filters inside the tank with large gravel# 203, medium gravel#197 small gravel #193, course sand #210, fine sand #207 & carbon.
* Project commissioning
* Housekeeping after each work

August 1996 – January 1997 ENGINEERING EQUIPMENT, INC. (EEI)
Project: Servicing/Maintenance
Location: Philippines
Position: (Industrial Electrician)

* Repair/maintain electrical equipments such as AC Diesel Power
Generator Mobile, DC Welding Generator & Air-compressor
* Do preventive maintenance as per schedule
* Render technical service to the client.
* Do house keeping.

March 1995 – September 1996 WILSON CONSTRUCTION
Project: Building Wiring & Installation
Location: Philippines
Position: (Building Electrician)

* Lay electrical pipes, cable pulling, threading/bending of pipes such
As Emt, IMC & RSCP.
* Install power Panel board, junction/utility box, pull box, isolator switch, breakers, Convenience outlet, switches & service entrance.
* Wiring installation, cable pulling and splicing of power & lightings.

July 1993 - February 1995 RIYADH DISTRICT WATER &
Project: SEWAGE AUTHORITY
Riyadh Sewerage Operation & Maintenance
Location: Kingdom of Saudi Arabia, Riyadh
Position: (Plant Maintenance Electrician)

* Obtained work permit prior to commence the work.
* Perform maintenance works on different stations of sewerage plant which Includes troubleshooting/repair, disassemble/assemble of 3 phase motors & Wiring installation.
* Assist Senior Electrician in heavy repairs of High and low-voltage switch gear & Air circuit breakers for industrial application.
* Also assist in synchronization of large AC Generator rated 2 MW.
* Do housekeeping after each work.

January 1992 – May 1993 AL-THINAYAN EST. (K.S.A.)
Project: Maintenance & Servicing
Location: Al-Qassim, K.S.A.
Position: (Pivot/Electrical Technician)

* Erect & install Pivot irrigation system.
* Repair & trouble shoot Pivot irrigation system and its electrical control system.
* Render technical service to the company's clients.

December 1990-December 1991 NEWTON ENGINEERING CORP.,
Project Maintenance & Servicing
Location Novaliches, Quezon City
Position (QA/QC & Service Technician)

* Perform series of testing/Check-up of Ac/DC motors, generator &
Transformer subject for repairs & evaluation.
* Use surge comparison tester, Hipotronic, vibro tester, Galvanometer, Megger or Insulation resistance, multi tester, temperature monitor, tacho meter, growler & Polarity tester.
* Conduct no load testing, current check, temperature, etc., for final evaluation of newly repaired motors.
* Render technical service to the clients.

EDUCATIONAL ATTAINMENT:

ELEMENTARY Banlat Elementary School
Date Graduated 28 March 1977

HIGH SCHOOL Pasong Tamo High School
Date Graduated 26 March 1981

COLLEGE FEATI University
Date Graduated 27 March 1985
COURSE Associate in Electrical Engineering (A.E.E.)

TRAININGS & SEMINARS ATTENDED:

May 3-9, 1992 Technical Service Seminars
Sponsored and Conducted by Valmont Industries Inc. USA

July 3-6, 2000 Personal Safety and Social Responsibilities
Conducted by National Maritime Polytechnic

October 28, 2003 Fall Protection and Ladder Safety
Safety House V.V. Soliven, San Juan, Metro Manila

November 4, 2003 Control of Hazardous Energies
Safety House V.V. Soliven, San Juan, Metro Manila

November 5, 2003 Basic Electrical Safety
Safety House V.V. Soliven, San Juan, Metro Manila

November 19, 2003 Confined Space
Safety House V.V. Soliven, San Juan, Metro Manila

November 22, 2003
1) Fire Safety
2) Hazardous Communication
3) Advanced Chemical
4) Manufacturing Ergonomics
Safety House V.V. Soliven, San Juan, Metro Manila

March 19, 2004 Permit Work Receiver
Conducted by: Saudi Petrochemical Company
Jubail, Saudi Arabia

January 2005-April 2005 Reflexology Seminar (Scientific Massaging)
Conducted by: Mr. Ramon Garcia
Jubail, Saudi Arabia

CONTACT PERSON IN CASE OF EMERGENCY:
Upon request

CHARACTER REFERENCES:
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 557)

Go to Search Parameters...

Brief Description

Electronic/ Mechanical Tech

Water & Wastewater Specialist searching for a challenging position overseas.

Professional Contract Chef / EMR Available

I am currently working in an Offshore Vessel as an Electrician. I've worked experienced in Petro-Chemical Plant in Saudi & CHEVRON, Angola Africa as Maintenance Electrician. I am a Registered Master Electrician with PRC Licensed no. 0023265. I am currently looking for a job.

Very experienced Welder, Pipe fitter, Foreman

Fifteen years experience in management, manufacturing and engineering with emphasis on quality assurance, environmental and safety.

Construction Management/Estimating/Supt/PM

I am seeking Medical Advisor/Occupational Health position to continue my occupational physician’s career with a multinational company.

Welder Fitter, with pressure certification (F3/F4 on 5G uphill progression -mild steel). Worked in fabricating shop on commercial and industrial products. Very proficient with GMAW and SMAW. Little experience with GTAW. Worked mostly mild still and some alloy. Little aluminum experience.

Journeyman Industrial Electrician , Apprentice Instrumentation Mechanic / PLC , DCS, HMI, SCADA . Underground / Surface, Oil and Gas, Mining

Environmental pre-construction surveys for wetlands, streams, and wildlife habitat; knowledge of wetland plants, soils, and delineation rules as well as general ecological knowledge. 10 years of experience on pipeline projects.

Fully qualified safety proffesional, with extensive experience in the construction industry, Rigging & Lifting Supervisor and Qualified Engineer please review CV for all qualifications & working background

ISO Implementation, Documents, Records, Archival Management, QA Manager, Writing Technical Documents, Auditor

Rotating & reciprocating equipment technician

I have 7 years experience of electrical installation onshore and offshore Oil / Gas Industry complemented with a 4-year recognized apprenticeship.

Professional Land Surveyor

International Operations- Foreman, Diamond Driller, RC Driller, Long Hole Driller, Blaster etc.

Sales, Engineering Project Manager

Project Manager, Field Engineer, Commissioning Electrical Switchgear

Have been a rigger/ironworker for 10 years+. Have experience in welding and have done this on/off for 8 years.

Qualified, results-producing Emergency Management Professional with experience steering and directing all aspects of operations, administration, budgeting, and equipment maintenance. Successful in managing multiple projects with compelling priorities involving program development.

Project Manager - Sales - Technical

Mining Engineer with 20+ years experience, Supervisor of Drilling Crews, great work ethic, will meet deadlines and bottom line, effective team builder

Graduate Botanist, four year science degree, environmental consultancy, surveying, vegetation analysis, climate studies, administration,

Extensive skills in composites, operations management, plant management, as well as manufacturing of high speed offshore vessels.

Technical Project Manager

Quailty Coordinator, Welding Specialist, Safety Training Coordinator, Operations Coordinator Prefer Former CIS Russia, Kazakhstan

My two and a half years experience working in the mining atmosphere in the Morenci Mine repairing and maintaining CAT equipment and haul trucks coupled with my interest and passion for heavy duty mechanics will hopefully align well with what you are looking for.

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Project Management / Inspection / Procurement / Quality Assurance

Concrete plant operator, concrete mixer driver, semi-dump truck and some flatbed experience. Also site supervisor with end loader and skid steer experience. Many years of welding, machining, and maintenance duties.

I am working with Gujarat Narmada valley Fertiliser company ltd which is a fertilizer and petrochemical complex and produces Ammonia, Urea, Acetic acid, Formic acid, Weak Nitric acid, Concentrated nitric acid, Ammonium Nitro phosphate, Calcium ammonium Nitrate, Aniline, TDI, Methanol.

Oil and Gas Plant Superintendent / On Shore or Off Shore Production Supervisor / Senior Process Technician / Marine Terminal Supervisor, SIMOPs Coordinator / PTW Coordinator

US Air Force and Old Dominion Freight, Inc. (Over The Road Operator in 51 of 52 States, excluding Hawaii)

Maintenance, water purification, reverse osmosis, materials, logistics, management

Electrician - Certified

Experienced Design Engineer

An experienced security professional with 24 years of strong corporate security and law enforcement qualifications who has demonstrated a high level of success in a variety of significant and highly critical assignments in a fast paced environment. Also has an impressive track record of hands-on exp

Channel sales, Institutional sales, Oem sales, Business development, International sales

Repair and Maintenance, Product Quality Analyst, electrical fault analysis, acceptance testing, interpret drawings and schematics, advanced vibration, reliability growth testing, precise measuring equipment, tester platforms (Teradyne, Polaris, Fusion), power supply adjustment and replacement

Software Developer .NET, Java SQL

As a skilled excavator operator in most fields presently holding CPCS operators card at NVQ level

Contracts Manager

Quality, Safety, Health, Environment and Security Professional w/ 17+ years in International upstream and downstream O&G sectors

Assisant professor, PhD environmental biotechnology, expert in biological treatment of hazardous contaminants.

Company Oriented,Safety Is #1 And Very Hard Working

Looking for management position in mineral (gold and precious metals) exploration and environmental engineering consulting.

Previous warehouse work..good hard worker ,fast learner

12 Years Maritime Experience • Crew Training and Management implementing. Marine Safety, Salvage, Port and Offshore Operations • Policy and Procedure Enforcement/Compliance

Project Manager/Construction Supervisor/Contracts Manager/Claims Manager/Cost Engineer/Construction Manager/Site Supervisor/Civil Engineer/Quantity Surveyor etc.,

1 2 [ 3 ] 4 5 6 7 8 9 10 11 12

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out