Resume - Oil and Gas Plant Superintendent / On Shore or Off Shore Production Supervisor /...

Misco Jobs

Resume #42081

CONTACT INFORMATION:
View contact information...

Oil and Gas Plant Superintendent / On Shore or Off Shore Production Supervisor / Senior Process Technician / Marine Terminal Supervisor, SIMOPs Coordinator / PTW Coordinator
Proven technical and analytical strength gained through 32 years of progressive experience in all aspects of processing and handling of Crude Oil, petroleum products, Oil Refining, Gas Plant operations, Off-shore oil and Gas production, and Marine Terminal operations. Work experience in Canada, Scotland, Germany, Venezuela, Libya, Qatar and Russia.

EMPLOYMENT HISTORY

SAHKLIN ENERGY INVESTMENT COMPANY (SEIC) 2008 to present
Sakhalin Energy Investment Company Ltd.
56, Khabarovskaya St., Yuzhno-Sakhalin, Russia
* Site coordinator responsible for SIMOPS between construction, pre-commissioning, commissioning and operations
* Responsible for all PTW coordination for the entire OPF (onshore production facility) and supporting export pipelines.
* Responsible for the integration of the PTW from the construction phase (a general PTW paper system) to the operations Intergraded Safe System of Work (ISSOW). First ISSOW in the paper format and than to facilitate the switch over to the ISSOW to the electronic system.
* To continually monitor and audit the PTW systems and to track and control the switch over.
* Conduct a daily PTW and Planning meeting to identify any conflicts as SIMOPs and to facilitate conflict resolution.
* Responsible to attend the week planning look a head meeting to provide input as a consultant and advisor, in an effort to ensure a smooth and achievable work schedule.
* Work closely with HSE to facilitate Naked Flame work in hazardous areas and Confined Space entries.
* Report directly to the Onshore Installation Manager (OIM).

DOLPHIN ENERGY 2005 to Present
Dolphin Energy Limited, Box 22275, Doha, Qatar
* Plant Shift Superintendent at the Dolphin Energy facility located in RasLaffan, Qatar. Responsible to over see the day to day operations of the entire Dolphin facility and the line manager for all operations and start up staff during my shift. I reporting directly to the Production Manager.
* The facility consists of an onshore Gas plant with a total through put of 2620MMSCFD which is supplied by two offshore platforms via two sea-lines. With a sales gas capacity of 2100MMSCFDD and Condensate production of 110,000B/D.
* The plant consists of Two Gas treatment trains, Acid gas removal, Sulphur Recovery, NGL Recovery (Ethane, Propane, and Butane), export gas compression (Sales gas).
* Responsible for the entire Dolphin facility including production Utilities, offshore platforms, dry gas export, the tanks farm (condensate) and shipping jetty. Also the Lead in the ECC in emergency situations.
Accomplishments:
* Placed in charge to kick off the development of the Standard Operating Procedures for the two offshore platforms and to cover the responsibilities of the than vacated Offshore Superintendent position
* Placed in charge of all procurements acquisitions and logistics for the offshore platforms to ensure a seamless handover from projects to operations and to prepare for platform start up and first well clean ups.
* Assisted and co-ordinated with the Dolphin training department to ensure the compulsory offshore training for all offshore and on shore operational personnel.
* Reviewed and commented on the start-up and operating procedures for the platforms and process unites.
* Over seen the commissioning and SIMOP's of the 48" gas export pipeline and the start up of the early gas phase which seen 350 MMscf/d of dry gas. Via the Dolphin export line to the UAE.
* Responsible for the PTW system and the final authority for the same.
* Currently in charge (during my shift) to over see and ensure safe and timely plant start-up working directly under the start-up manager.

WINTERSHALL LIBYA (BASF) 2001 – 2005
Dhat Ai-Emad Complex
P.O. Box 469, Tripoli, G.S.P.L.A.J, Libya.

* Production supervisor/Production team lead at the Wintershall facility in Libya North Africa. The facility consists of 130,000 bbl/d Oil Plant; 65 MMscf/d Residue Gas Utilization Plant; 10,000 bbl/d LPG production; 20,000 bbl/d Salt Water Disposal Plant; three 6500 HP Gas Lift Compressor Station and a 50 Megawatt Alstom Gas Turbine Power Plant.
* Coordinating with maintenance departments and facilitate engineering, regarding plant operations
* Provide supervision on the daily operations to ensure plant optimisation and maximum yield.
* Provided planning and operations input as a shutdown co-ordinator for the shutdown and inspections during the 2004 T&I and performed as the PTW co-ordinator.
* Provide training for the development of the Libyan Nationals in the operations of the GOSP and GUP and to assist in their development of the spoken English language.
Accomplishments:
* 2003 On assignment at Wintershall head office in Kassel, Germany. I provided operations input to the Wintershall expansions of their Libyan operations. My duty's consisted of performing Haz-Opps; review of vendor documentation, P&IDs and Cause and Effect. Provided assistance to vendors and wrote and prepared training materials and start-up procedures for the operators in the field.
* Worked on the development and implementation of the current permit to work system (PTW based on the Shell PTW system) at the Wintershall facilities.

BROWN and ROOT CANADA 1995 – 2001
235 Water St. St. John's, NF, A1C 1B5

* Control Room Technician on the Hibernia 200,000b/d Offshore Oil Production Platform.
* Part of the construction, commissioning and start-up team, both in the field and in the CCR.
* Worked on the development and presentation of the Hibernia platform process and utilities systems training and procedures for all Hibernia operations and maintenance personnel.
* Worked as a start up control room operator (Bailey Infi90) and instructor (trainer).
* Responsible for the operation of power generation which is provided by two 23.5 MW Brush Generators with General Electric model LM2500 gas turbines drivers.
* Responsible for the operation of Gas compression which is provided by two Dresser-Rand multi-stage centrifugal compressors, with General Electric model LM2500 gas turbines drivers, with a design discharge pressure of 68,800 kpag and a combined maximum gas injection rate of 4.6 million Sm3/d.
* This installation also provided water injection to facilitate the optimization of the Hibernia reservoirs.
Night Shift Co-ordinator
* Worked as Night Shift Coordinator with platform wide responsibilities and providing support to the operations team and coordinated simultaneous operation (SIMOPS) between production and Development.(The Hibernia Platform has two drilling rigs, 200,000b/d Oil Production, Water and Gas injection)
* Responsible to ensure maximize production within wells, reservoir and plant constraints
* Authorization of Permit to Work System.
* Conducted team meetings i.e.: development, planning, safety, and production and HSE.
* Provided nightly reports covering all platform operations and actives.
* Co-ordinate simultaneous activities with Development, (drilling) Material movement, (logistics) Domestic and Operations (process).
* Assumed Emergency Command and Control (ECC) in the CCR during platform events and than provided a detailed hand over to the OIM.

OFFSHORE DESIGN LIMITED CANADA 1994 – 1995
ODL CANADA, St. John's, Newfoundland, Canada
* Producing Technical Documentation, specializing in Offshore Oil Production Installations.
* Assigned to ODL in Aberdeen, Scotland, as a technical author, producing the OSM's (Operations and Systems Manuals) and Operating Procedures including Control Philosophy and training manuals
ULTRAMAR CANADA INC. 1989 - 1994
TEXACO CANADA INC. 1977 - 1989
Oil Refinery, Eastern Passage, Nova Scotia, Canada

Production Supervisor 1992-1994
* Responsible to ensure maximum on spec production within plant constraints
* Conducted Departmental and Plant Health and Safety meetings, and participated in monthly unit (plant) inspections.
Marine Terminal Supervisor 1990 – 1992
* Supervised cargo loading (refined product) and unloading (crude oil).
* Maintaining chronological logs and handling of all ships documentation.
* Monitoring and control of environmental instances.

Control Room Operations Technician 1981 – 1990
* Operated the control panel on crude unit, vacuum unit, hydro treater, catalytic reforming unit (platformer), fluid catalytic cracking unit (Kellogg Model "C" Converter) stove oil / gasoline treaters and the waste water treatment plant.

Process Technician (operator) 1977 - 1981
* Completion of the operator apprenticeship program.

CERTIFICATION
* Stationary Engineer 4th class
* Wastewater Treatment Operator Certificate First Class
* Power Engineer 4th class

EDUCATION

TECHNICAL UNIVERSITY OF NOVA SCOTIA 1995
* Boiler Controls & Tuning
* Alternative Controls Techniques
* Bailey DCS

SOUTHERN ALBERTA INSTITUTE OF TECHNOLOGY (SAIT) 1994
* 4th Class Stationery Engineer (Standardised)

ENVIRONMENT CANADA
Halifax, Nova Scotia
* Waste Water Treatment Certification First Class

References available on request:

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 556)

Go to Search Parameters...

Brief Description

Electronic/ Mechanical Tech

Water & Wastewater Specialist searching for a challenging position overseas.

Professional Contract Chef / EMR Available

I am currently working in an Offshore Vessel as an Electrician. I've worked experienced in Petro-Chemical Plant in Saudi & CHEVRON, Angola Africa as Maintenance Electrician. I am a Registered Master Electrician with PRC Licensed no. 0023265. I am currently looking for a job.

Very experienced Welder, Pipe fitter, Foreman

Fifteen years experience in management, manufacturing and engineering with emphasis on quality assurance, environmental and safety.

Construction Management/Estimating/Supt/PM

I am seeking Medical Advisor/Occupational Health position to continue my occupational physician’s career with a multinational company.

Welder Fitter, with pressure certification (F3/F4 on 5G uphill progression -mild steel). Worked in fabricating shop on commercial and industrial products. Very proficient with GMAW and SMAW. Little experience with GTAW. Worked mostly mild still and some alloy. Little aluminum experience.

Journeyman Industrial Electrician , Apprentice Instrumentation Mechanic / PLC , DCS, HMI, SCADA . Underground / Surface, Oil and Gas, Mining

Environmental pre-construction surveys for wetlands, streams, and wildlife habitat; knowledge of wetland plants, soils, and delineation rules as well as general ecological knowledge. 10 years of experience on pipeline projects.

Fully qualified safety proffesional, with extensive experience in the construction industry, Rigging & Lifting Supervisor and Qualified Engineer please review CV for all qualifications & working background

ISO Implementation, Documents, Records, Archival Management, QA Manager, Writing Technical Documents, Auditor

Rotating & reciprocating equipment technician

I have 7 years experience of electrical installation onshore and offshore Oil / Gas Industry complemented with a 4-year recognized apprenticeship.

Professional Land Surveyor

International Operations- Foreman, Diamond Driller, RC Driller, Long Hole Driller, Blaster etc.

Sales, Engineering Project Manager

Project Manager, Field Engineer, Commissioning Electrical Switchgear

Have been a rigger/ironworker for 10 years+. Have experience in welding and have done this on/off for 8 years.

Qualified, results-producing Emergency Management Professional with experience steering and directing all aspects of operations, administration, budgeting, and equipment maintenance. Successful in managing multiple projects with compelling priorities involving program development.

Project Manager - Sales - Technical

Mining Engineer with 20+ years experience, Supervisor of Drilling Crews, great work ethic, will meet deadlines and bottom line, effective team builder

Graduate Botanist, four year science degree, environmental consultancy, surveying, vegetation analysis, climate studies, administration,

Extensive skills in composites, operations management, plant management, as well as manufacturing of high speed offshore vessels.

Technical Project Manager

Quailty Coordinator, Welding Specialist, Safety Training Coordinator, Operations Coordinator Prefer Former CIS Russia, Kazakhstan

My two and a half years experience working in the mining atmosphere in the Morenci Mine repairing and maintaining CAT equipment and haul trucks coupled with my interest and passion for heavy duty mechanics will hopefully align well with what you are looking for.

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Project Management / Inspection / Procurement / Quality Assurance

Concrete plant operator, concrete mixer driver, semi-dump truck and some flatbed experience. Also site supervisor with end loader and skid steer experience. Many years of welding, machining, and maintenance duties.

I am working with Gujarat Narmada valley Fertiliser company ltd which is a fertilizer and petrochemical complex and produces Ammonia, Urea, Acetic acid, Formic acid, Weak Nitric acid, Concentrated nitric acid, Ammonium Nitro phosphate, Calcium ammonium Nitrate, Aniline, TDI, Methanol.

Oil and Gas Plant Superintendent / On Shore or Off Shore Production Supervisor / Senior Process Technician / Marine Terminal Supervisor, SIMOPs Coordinator / PTW Coordinator

US Air Force and Old Dominion Freight, Inc. (Over The Road Operator in 51 of 52 States, excluding Hawaii)

Maintenance, water purification, reverse osmosis, materials, logistics, management

Electrician - Certified

Experienced Design Engineer

An experienced security professional with 24 years of strong corporate security and law enforcement qualifications who has demonstrated a high level of success in a variety of significant and highly critical assignments in a fast paced environment. Also has an impressive track record of hands-on exp

Channel sales, Institutional sales, Oem sales, Business development, International sales

Repair and Maintenance, Product Quality Analyst, electrical fault analysis, acceptance testing, interpret drawings and schematics, advanced vibration, reliability growth testing, precise measuring equipment, tester platforms (Teradyne, Polaris, Fusion), power supply adjustment and replacement

Software Developer .NET, Java SQL

As a skilled excavator operator in most fields presently holding CPCS operators card at NVQ level

Contracts Manager

Quality, Safety, Health, Environment and Security Professional w/ 17+ years in International upstream and downstream O&G sectors

Assisant professor, PhD environmental biotechnology, expert in biological treatment of hazardous contaminants.

Company Oriented,Safety Is #1 And Very Hard Working

Looking for management position in mineral (gold and precious metals) exploration and environmental engineering consulting.

Previous warehouse work..good hard worker ,fast learner

12 Years Maritime Experience • Crew Training and Management implementing. Marine Safety, Salvage, Port and Offshore Operations • Policy and Procedure Enforcement/Compliance

Project Manager/Construction Supervisor/Contracts Manager/Claims Manager/Cost Engineer/Construction Manager/Site Supervisor/Civil Engineer/Quantity Surveyor etc.,

1 2 [ 3 ] 4 5 6 7 8 9 10 11 12

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out