Resume - Project Management / Inspection / Procurement / Quality Assurance

Misco Jobs

Resume #52004

CONTACT INFORMATION:
View contact information...

Education
MS Mining Engineering - Mackay School of Mines, University of Nevada, Reno 1988
BS Geology - Guilford College, Greensboro, NC 1979

Skills
Project Management / Inspection / Procurement / Quality Assurance
For: Light Rail, Heavy Commuter & Freight Rail / Heavy Civil / Tunnels, Mines, Plants.

Experience
Resident Engineer/Inspector - Rail Technology, Inc., Sacramento CA - 2000 to Present. Design Manager for heavy commuter San Jose to Gilroy rail expansion project. Project Manager for rail and special trackwork procurement contracts. Served as Resident Track Inspector for construction of ballasted railroad track, grade crossings, special trackwork, direct fixation track on aerial structures and in tunnels. Routinely handle project schedules, contractor's submittals & RFI's.

Project Manager - The Bartley Corporation, Silver Spring, Maryland - 1998 to 2000. Managed concrete construction projects. Implemented the safety program, estimated jobs and developed proposals. Provided hands-on job supervision.

Resident Engineer - Rail Technology, Inc., Sacramento, CA – 1997 to 1998. Project Inspection, Developed Safety Certification and Quality Assurance Programs.

Quality Control & Heading Engineer - Kajima Kiska, JV, Washington DC. 1996 to 1997. WMATA Green Line tunnel project in Washington D.C. Inspected concrete, monitored ground control grouting. Supervised line/grade control in shield a driven, concrete segment lined tunnel in difficult ground.

Field Engineer - Tutor Saliba Perini - San Francisco, CA 1993 to 1996
Staff engineer on the MUNI Metro Turnback Project for the SF MUNI subway. Two 18-foot-diameter tunnels were driven by a soft ground shield under compressed air using bolted steel liner plates. Produced plans and implemented extensive traffic detours in a downtown setting. Field supervision of labor and sub-contractors performing line/grade control, installing storm water pumping system, remedial bolting of the underlying BART tube steel liner plates, chemical grouting and jet grouting, ground settlement instrumentation.

Field Engineer – Stacy & Witbeck/Dillingham - San Francisco, CA - 1992 to 1993. SF MUNI South Embarcadero Rail Extension Project. Supervised track construction.

Mining & Tunneling Project Engineer
Mine Development & Engineering Corp. - 1989 to 1992. Served various contracts:
Morrison Knudsen/American Girl JV - Yuma, AZ – Supervised construction of two longhole drill & blast ore transfer winzes;
The Irvine Company, Newport Beach, CA – Served design team and provided supervision for a bolted steel liner plate tunnel under the Pacific Coast Highway in difficult ground;
Riverside County Flood Control and Water Conservation District – Served design team and supervised construction of a steel plate/ CIP concrete lined water tunnel under the Rt. 91 freeway;
Magma Gold, Ltd., Tucson AZ. - performed Mine planning for the McCabe underground gold mine near Prescott, AZ;
Valley Engineers, Fresno, CA – Supervised installation of drilled anchor tie-backs for a 36" diameter hydroelectric inlet pipeline on a remote section of the North Fork Yuba River, CA;
US Geological Survey, Carson City, NV – Supervised horizontal drilling from a shallow shaft in desert alluvium for placement of instrumentation to monitor migration of radioactive isotopes from US Ecology's hazardous waste facility near Beatty, NV.
Metropolitan Water District of Southern California and San Francisco Water Department.
Served as the CAL-OSHA Safety Representative supervising gas testers for construction and rehab projects in tunnels classified gassy and potentially gassy.

Mining Engineer - Homestake Mining Company - Lead, SD 1988 -1990
Mine Planning Engineer in the underground & open cut divisions and in mill operations and maintenance.

Underground Miner and Mine Geologist - Western Mine Development, Kingston, NV. 1983 – 1988. While enrolled in the Mining Engineering Program at Mackay School of Mines, Reno, NV. Served as miner, shifter, ore control supervisor for underground projects in NV and AZ.

Exploration Geologist - General Mineral Development, Reno, NV. 1981 - 1983. Supervised surface drill rigs and underground sampling for developing gold properties near Eureka, NV. Conducted surface sampling and mapping of gold prospect properties in Nevada.

Engineering Geologist - Cooper & Clark Consulting Engineers, Gillette WY. 1979 - 1981. Supervised drill rig conducting soil borings for railroad bed upgrade, construction and coal mine projects.

Certifications and Affiliations:
Professional Mining Engineer #010628, State of Nevada 1994
Member AIME-Society of Mining Engineers, Past Chairman of San Francisco Chapter.
CAL OSHA Safety Rep. #S51 96 / CAL OSHA Gas Tester #G123 96
MSHA 40 HR Safety Training Underground Mining
MSHA Instructor, Nevada Division of Mine Inspection
CAL OSHA Blasters License #7364 General Underground
MSHA Mine and Tunnel Rescue Training
BART Contractor Safety Certification

Supplemental Statement of Experience - Recent Rail Projects
William D. Baker

August 2005 - August 2006 C111 – Rail Rehabilitation at 1st & San Carlos St. $1.9M
Track Inspector on furnish / install contract for 115RE special trackwork embedded in San Jose city streets. Reviewed shop drawings and QA submittals. Conducted shop inspection and QA audit at Nortrak's manufacturing facility in Seattle, WA.

October 2001 – June 2005 C326 - Civil I SJ Diridon Station to Winchester $35.5M
Track inspector for installation of owner furnished rail and special trackwork for open LRT 115RE and Freight (second hand 133RE) track, paneled road crossings and a ballasted track bridge structure.

April 2002 – September 2003 C325 – Civil II Woz Way to SJ Diridon Station $17.7M
Track inspector for installation of owner furnished rail, special trackwork and DFF for open LRT track, paneled road crossings and a tunnel structure.

April 2001 – November 2003 May 2004 C225 – Capitol LRT Civil, Track &
Landscaping $48.1M
Resident Track Inspector for installation of owner furnished rail and special trackwork for open LRT track and paneled road crossings. Reviewed shop drawings and QA submittals, conducted field inspection and directed track inspectors.

January 2001 – May 2003 June 2004 C515 – Civil, Track and Landscaping (I-880 to
Hostetter) $22.9 M
Resident Track Inspector for installation of owner furnished rail, DFF and special trackwork for open LRT track, paneled road crossings and an aerial structure. Reviewed shop drawings and QA submittals, conducted field inspection and directed track inspectors.

April 2001 – December 2002 A110 – Concrete Ties $2.1M
Resident Inspector on procurement contract. Purchased ties for LRT 115RE rail to be used on various construction contracts. Administered contract, reviewed shop drawings and QA submittals. Conducted shop inspections and QA audit at CXT / LB Foster's manufacturing facility in Spokane, WA. Supervised inspection during unloading and final inventory at VTA's San Jose storage yard.

March 2001 – September 2003 A100 Running Rail $2.0M
Resident Inspector on procurement contract for new 115RE and second hand 133RE running rail and OTM to be used on various LRT and freight railroad construction projects. Administered contract, reviewed shop drawings and QA submittals. Conducted shop inspections and QA audits at LB Foster's manufacturing facility in Seattle, WA. Inspected second hand 133RE rail at LB Foster's lay down facility in Bliss, Id. Supervised inspection during unloading and final inventory at VTA's San Jose storage yard.

March 2001 – November 2002 A105 – Special Trackwork $2.2M
Resident Inspector on procurement contract for special trackwork, wood ties, concrete crossing panels and OTM to be used on various LRT and freight railroad construction projects. Administered contract, reviewed shop drawings and QA submittals. Conducted shop inspections and QA audits at LB Foster's and CXT/LBF's manufacturing facilities in Seattle and Spokane, WA. Supervised inspection during unloading and final inventory at VTA's San Jose storage yard.

June 2000 – May 2002 A324 – Special Trackwork for Woz Way/San Carlos $485K
Resident inspector on procurement contract for special trackwork. Purchased rail, DFF and OTM for an embedded LRT 115RE half-grand union. Administered contract, reviewed shop drawings and QA submittals. Conducted shop inspection and QA audit at ABC Naco's (now Nortrak's) manufacturing facility in Chicago, IL.

November 2000 – April 2001 A322 – Special Trackwork SJ Diridon Tunnels $127K
Resident Inspector on procurement contract for special trackwork. Purchased rail and OTM for 136RE freight/commuter rail turnouts. Administered contract, reviewed shop drawings and QA submittals. Conducted shop inspection and QA audit at ABC Naco's (now Nortrak's) manufacturing facility in Pueblo, CO.

January 2000 – July 2000 C510 – Civil, Track & Landscaping (Zanker to I-880) $7.9M
Track Inspector for installation of owner furnished rail and special trackwork for open and embedded LRT track.

January 2000 – April 2000 A822 – Special Trackwork (Zanker to I-880) $200K
Resident Inspector on contract to procure special trackwork – LRT 115RE curved crossover – from Progress Rail Services. Administered contract, reviewed shop drawings and QA submittals. Conducted shop inspection and QA audit at Progress Rail Services manufacturing facility in Sherman, TX.

March 1998 A810 – Running Rail $1.8M
Track inspector for procurement of 115RE rail and special trackwork. Inspected unloading and stacking. Conducted shop inspection and QA audit at Progress Rail Services DeCoursey manufacturing facility in Covington, KY.

March 1998 A840 – Concrete Ties $1.3M
Track inspector on procurement contract. Inspected unloading and stacking of Rocla ties made for various LRT projects.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 531)

Go to Search Parameters...

Brief Description

industrial instrument mechanic/building automation

49CFR HAZMAT Technical Trans (D.OT., ADR, RID, IATA, IMDG); HAZCOM (1910.1200)

Installation, maintenance and repair of medical equipments

My geological background is unconventional, international, and interdisciplinary; from the petroleum and mining industries, university teaching in China and USA, petroleum-related research in Norway, to mining-exploration and management positions in Laos and Malaysia.

Safety & Environmental Specialist with excellent knowledge and experience. Please refer my resume with complete details available.

Experienced Ops Engineer

Sales, Engineering Project Manager

Emergency Response Manager Trainer and Health & Safety professional: NEBOSH, Tech IOSH (NASP) Certified Safety Auditor, Certified Health & Environmental Management Specialist 2005/2006 and other technician certificates. 12 + Years HSE experience, 30 + years overall experi

Biologist/Environmental Scientist

Project Management / Inspection / Procurement / Quality Assurance

GPS, IT Technician and Manager

Looking for a postion in Service/Operations management based in the Baltimore area. Excellent platform and presentation skills.

High motivated, and results-oriented person with a strong drive on self development and task accomplishment. Experienced in leading consumer good sales team and steering the execution of monthly programs. Demonstrated success driving growth in year 2005 , 2006, 2007.

US Air Force and Old Dominion Freight, Inc. (Over The Road Operator in 51 of 52 States, excluding Hawaii)

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Electrician - Certified

A technocrat with proven experience in the filelds of Marketing and business development, general management of multinational Industrerial valves manufacturing organizationas with an experince of 14 years.

Firefighter, Search and Rescue Instructor, Safety Instructor, First Aid Instructor, Emergency Response Coordinator, Team Leader, Crew Chief,

Quality, Safety, Health, Environment and Security Professional w/ 17+ years in International upstream and downstream O&G sectors

I have 25 years of multi disciplined, design, engineering, and project management experience with very strong automation skills. I am highly experienced with specialize, automated process equipment systems for Oil & Gas, Petrol Chemical, Power Generation, Semiconductor,Pharmaceutical,Water & Waste

My skills make me a leader no matter what job or position, I'm successful........thanks!

Looking for career enrichment opportunities in Sales & Marketing, Business Development, Technical Services, Operational Manager, or Telecom commercial consultant with a frontline organization

Journeyman Electrician

Assisant professor, PhD environmental biotechnology, expert in biological treatment of hazardous contaminants.

Looking for management position in mineral (gold and precious metals) exploration and environmental engineering consulting.

Previous warehouse work..good hard worker ,fast learner

• Masters Degree in chemistry, University of Madras, Chennai, India (April, 1995) • Bachelors Degree in Chemistry, University of Madras, Chennai, India (April, 1992)

Project Manager/Construction Supervisor/Contracts Manager/Claims Manager/Cost Engineer/Construction Manager/Site Supervisor/Civil Engineer/Quantity Surveyor etc.,

Engineering/Operations professional with sixteen (16) years of experience managing multi-disciplined projects.

Licenced Electrician, Refrigeration Mechanic, Qualified Fitter and Turner, Cert 4 Assesment and Workplace Trainer, Workplace Health and Safety Officer. Trade foreman

Mechanic/Welder Field, shop, underground

Rotating & reciprocating equipment technician

I am a CCO crane operator willing to travel.

MSc environmental sciences with a strong focus on air pollution and health risk assessment

6 years working with different equipment NCCER certified level 3

I wish to continue to expand my skills and further myself within the field of diesl fitting

I have skills in project manage ment in: Aviation,Defence Telecommunications, Materiel Maintenance and Logistics.

Complete Facility Maintenance

Graduated Mechanical Enginner with Extensive Experience in Europe, Australia and Africa in Power generation, Oil Exploration, Mining Industry

3 decades of environmental, health and safety experience in the private and government sectors

Proven problem solver with various experiences relating to offshore/marine and onshore oil and gas operations. Over 35 years experience with a major operating company and contract operating company in Gulf Coast oil and gas production operations; possessing strong interpersonal/communication skills

Communicator, negotiator, manager, natural leader

Asset Protection Specialist, Security and Safety Management Specialist

German Language Malay Student

Manager / Engineer ( HW / SW / QA / Training )

Instrumentation I&C DCS Technician

30 years experience with structual commercial and residential concrete projects

Qualified fitter and turner,ncr computer and equipment technician, diamond mining expierience, electro mechanical experience. steam turbines and related equipment experience

Surveyor, QC, upstream, oil, gas, seismic, geophysical, exploration, production, pipeline, module, construction

NCCCO certified crane/heavy equipment operator and CDL driver

1 2 [ 3 ] 4 5 6 7 8 9 10 11

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out