Resume - 12 years experience in instrumentation mining processing plant.holder of a craft...

Misco Jobs

Resume #69013

CONTACT INFORMATION:
View contact information...

Date of Birth: 22/12/69
Place of Birth: Chipata
Nationality: Zambian
Sex: Male
Marital status: Married

B. EDUCATION BACKGROUND AND TECHNICAL QUALIFICATION.
YEAR SCHOOL QUALIFICATION OBTAINED
1976-1983 Chama Primary School Grade 7 School Certificate
1984-1988 Chama Secondary School Grade 12 school certificate
1991-1993 Instrumentation Training Craft Certificate in process control
School. ZCCM. Kitwe. Instrumentation.

C. PROFESSIONAL QUALIFICATION
YEAR COLLEGE ATTENDED QUALIFICATION OBTAINED
1997 Home study with CIPS First certificate in purchasing and supply
2004 Home study with CIPS Advanced certificate in purchasing and supply
2005 Home study with CIPS Graduate Diploma in purchasing and supply
(Foundation stage)

D. SUMMARY OF WORKING EXPERIENCE.
YEAR COMPANY JOB TITLE
1993-1998 ZCCM/RAMCOZ. CONCENTRATOR. Artisan Instrumentation 1998-2000 RAMCOZ PLC Materials co-coordinator 2000-2004 KCM (Nkana) FLASH DRYER Instrumentation Technician
2004 - 2006 Kansanshi Mining Plc Instrumentation Technician
2006- Date Chambishi metals plc Instrumentation Technician.

E. PRINCIPAL ACCOUNTABILITIES AS INSTRUMENTATION TECHNICIAN.
a) Carry out planned maintenance on Automatic valves and repairs on defective ones, thus overhaul, service parts, assemble, check operation and then do the installations. Valves worked on include saunder valves, El-o-matic valves, butterfly valves, power cylinder valves, and Samson valves, pinch valves.
b) Carry out installations of weightometre and calibrations. Thus installation of weight frame and alignment and also field and panel wiring. Models worked on include Ramsey model 20 -40, Micro-tech 10 -201 and 10 -30 and also process Automatic weightometers model EMB -220, version Embe - 220, 40 -06.
c) Instrumentation Control systems worked on include the following; Spec 200, profibus and DCS (Distributed control system).
d) Carry out checks on PH transmitters and probes, thus clean probes, then buffer check with PH7 and PH4. Models worked on Endless and Hauser MYPRO CPM431.
e) Do planned maintenance on density meters, thus check parameters and against known sample, type worked on; Thermo electron corporation model Am 770 version 3 software.
f) Planned maintenance on level transmitters and also programming. Endless and Hauser prosonic - m and vegason 61 level transmitters.
g) Worked on flow meters thus prosonic and promag 53, promag 50 and promag 35. Installation and programming them to suit the pipe and process. Endless and Hauser models.
h) Carry out checks on fire alarm system (smoke detector) to ensure quick action in case of fire using carbon dioxide fire fighting system.
I) Turning of controllers and instruments to suit the process condition. Proportional, derivative and integral (P.1.D)
j) Carry out planned maintenance and checks on programming logic controllers (PLC). Models worked on are Allen Bradley, Toshiba Houston, Siemens and Mitsubishi.
k) Check on water purification loop (chlorinating) to ensure right amount of chlorine is added to the domestic water.

l) Laying cables, tubing's for new installations or replacements.
m) Carry out maintenance on Spec 200 Annuciators for interlocks n) Carry out planned maintenance and repairs on oil lube system for Sag mill and Ball mills. Bearing lube system, trunion bearing, grease seal and girth gear lube system.
o) Carry out maintenance and repairs on VSDs (Dan Foss VLTR 5000 variable speed drives).
p) Carry out bench repairs, calibrations of controllers; speed seasons for weightometers, current to pneumatic converters, level transmitters, pressure gauges, pressure switches and other instruments.

q) Circuit modifications, wiring, and repairs faulty finding on belts feeders. Models ASHE and GEC motor speed panel (3 phase thyristors control)
r) Carry out checks, repairs and installations of resistance temperature detector (RTD), thermocouple, pyrometers and thermistors.
s) Have worked on current to profibus converter 4 -2Oma to FB converter. Smart IF
303.
t) Worked on profibus to current converters PB converters to 4 -2Oma smart Fl 303.
u) Planned maintenance and repairs on the filtration plant (LAROX FILTER) by Rexroth Bosch Group.
v) Planned maintenance and repairs on the copper Cathode stripping machine by Mesco incorporation Japan.
w) Worked on CCD's Bed level system using the magnetic Reed system. Planned maintenance, repairs and weekly calibrations.
x) Worked on turbidity meters on the CCD's clarifiers. Planned maintenance, repairs and calibrations.
y) Ensured instruments have a right address before installations. (profibus).
z) Have worked on the profibus system, a series communication system. PA and DP. PA (process Automation), DP (Decentralized periphery)

F. PRINCIPAL ACCOUNTABILITIES AS MATEERIALS COORDINATOR.

a. To make available a balance flow of spares and other equipments for the concentrator.
b. To draw spares from main stores for departmental stores using requisitions.
c. Ensure goods received meet the required standard d. Advice the planner on right stocking levels.
e Help source some spares from suppliers that are out of stock and are urgent.
f. Chase or Expedite goods or spares, which are in dangerous, stock levels.
g. Ensure there is good security on doors and roofing of the stores.
H Account for the receipts, issues and goods in stock within the store. (Stocktaking)..
I. Ensure good house keeping and proper stocking of materials in the stores

G. SHORT COURSES I SEMINARS ATTENDED 1994: Attended short course on trouble shooting Electronic equipment, computer software and introduction to programmable logic controllers (PLC). 1997: Seminar on Basic supervisory course.
1998: Seminar on advanced supervisory course.
2001: Computer course at copper net (Kitwe) on Microsoft word and Microsoft Excel.
2003: Computer course at Ikon (Chingola) on Microsoft Access (2000 Intro/Intermediate)
2003: Two weeks course in South Africa on the operation of the Flash Dryer. (Anglo Platinum). 2005: Attended a five days course on VSD s (variable speed drives) in kansanshi mine plc.solwezi by simation of South Africa.
H. PROJECTS DONE.
1. Putting up loop for Davcra cell level control system thus; level transmission, controller and saunder automatic valve.
2. Installation of Temperature recorder for ball mill Temperature Monitoring on bearings.
3. Installation of Thyristor Controlled Direct current belt feeders.
4. Installation of weightometer scale, major calibration and commissioning.
5. Commissioning of flash Dryer at KCM Nkana smelter.
6. Commissioning of processing plant at Kansanshi mines Plc. Solwezi.
I. HOBIES
Playing chess, watching football, listening to music and traveling.

J. REFEREES
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 301 to 350 of 527)

Go to Search Parameters...

Brief Description

HSE Mechanical Engineer. Quality, Safety and Environmental issues skills.

Diverse background in construction, logistics, remote location activity that can be used to meet your company's immediate and long-term needs. 15 years of increasing responsibilities in the construction industry. Multiple job responsibilities including blueprint reading and project layout.

Expertise in handling instrumentation systems like Inlet Gas Metering Systems, ABB & DANIEL Gas Chromatographs, Analyser Management and Data Acquisition Systems, Process Gas Analysers, Process Monitoring Field Instruments and Custody Transfer Equipment. with proven abilities in reducing downtime.

Free! I am very interested in a career in economic geology. Available for Willing to relocate both domestically and internationally. Available to work immediately. Over three months experience in Alaska doing geologic mapping/sampling for major gold mining company (summer 2008).

A Senior Inspector with more than 20 years extensive offshore/onshore activity in the Oil, Gas, Petrochemical and Nuclear Industries

MECHANICAL ENGINEER HAVE MORE THAN 9 YEARS EXPERIENCE WITH WITH RANGE OF EQUIPMENTS . IN MY RECENT JOB, I AM RESPONSIBLE ABOUT SCHEDULING AND PERFORMING TH PREVENTIVE AND CORRECTIVE MAINTENANCE OF TWO VESSELS AND OIL POLLUTION CONTROL EQUIPMENTS .

Career in logistics management during the past ten years. Operational background from the ground up with cargo airline, third party logistics provider, freight forwarding, marine and air cargo charter, and oil & gas industry experience in remote locations, namely Alaska and Russia / FSU.

Rigger crane op scaf

Thirty years as city of Winnipeg Fire Paramedic Service working through the ranks to a position of Captain . Knowledge of field and operation within emergency field.Experience in organizing and directing personnel. Extensive training in safety sector as National Construction Safety Officer and Consc

hnician/manager with over 15 yrs experience in train scheduling and safety. Expertise in train circulation graphing, train scheduling, and statistical analysis of safety and performance. Strong mathematical, analytical and problem-solving skills; demonstrated leadership; sharp eye for detail.

I am Mechanical Engineer with 7 years experiences in Engineering and Management

I am a Mechanical Engineering working in a Service company. I have two Msc one of them in Oil and Gas Engineering. I consider myself as a multi skilled Engineer

Experienced construction project manager with heavy background in petrochemical production operations

With a Master degree in Remote Sensing and GIS, Bachelor degree in Information Technology, as well as 5 years of working period, I have programming experience in ESRI ArcView, ArcSDE, ArcIMS, ArcObjects, ESRI ArcGIS Server (.NET), ERDAS, MapServer, MapGuide

Industrial Projects Management ,Purchase / Supply Chain Management,Business Development,,Material Management

Graduated from Memorial University of Newfoundland(2007) with Bachelor of Computer Science degree. Skills include SAP R/3 4.6 and 4.7, Oracle9i, Java, SQL, PL/SQL, MS-Access

Professional bilingual Engineer with, mining, constuction, and maintenance experience

Recent graduate seeking challenging environmental science position

Industrial Electrician 20 yrs. experience in automated industries. PLC, instrumentation, construction, commissioning and maintenance / troubleshooting

Seeking Chemist or Laboratory Technician Position-will relocate

I am an analytical, dynamic team player. I have a good sense of judgment, and a great eye for detail. I have the ability to adapt quickly to new priorities and challenges.

Heavy Mobile Equipment Mechanic/Welder/Driver

Civil Engineer

Senior project planner schedule with 12 years heavy industry and construction projects experience ,professional in using MS Project,Primavera P3&P5,MS office,CMMS systema like SAP R/3 , Maximo. Strong technical background , project management and cost control, contract and claim adminstration

Seasoned expat. Strong broad-based tech skills and extensive project O&M exp in frontier third world environments. Road const, water rehab, airports, infrastructure rehab. Extensive EPL/EPC exp as Project Eng.

Management , strategic management , marketing +EXPERIENCED PAINTER !!!

IT & Technical Facility Project Manager, Systems / Application Design, Development, Deployment, and Integration Manager - Data Centers, Contact/Call Centers, Hospitals, Renewable Energy Sources and Systems, "Green" Engineering/Construction, Clean Energy Technology, Energy Managment Systems / BAS

Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre-commissioning Engineer, Commissioning Engineer, Start-up Engineer, Process Engineer, Chemical Engineer

Detail oriented Instrument and Controls technician seeking international opportunities

Industrial electrician

Mechanical Engineer, 12 Years Gulf Experience In Maintenance Department

Sdw

A Dedicated Occupational Health & Safety Professional and Certified Safety Trainer

12 years experience in instrumentation mining processing plant.holder of a craft certifitecate in process control instrumentation.

Office Programs, Internet Programs, Programming Languages, high communication, hard worker, analytical and researching.

Experienced in construction and repair of recovery and power boilers, exchangers, vessels, light and heavy plate work, basic pipe and structural fitting, as well as work on mild steel, stainless, and aluminum.

I am an undergraduate at the College of William and Mary majoring in business and geology. I have worked in aggregate quaries durring summers in a number of different jobs. I am certified as a QC lab tech by VDOT, I can operate mobile equipment, repair plant equipment, and geotechnic wor

A graduate of a degree in Bachelor of Science in Chemistry and having passed the Licensure exam for Chemists given by the Professional Regulatory Commission. Have five-year meaningful experience in Analytical Chemistry.

Doctorate of Chiropractic Medicine, B.S. Anatomy & Physiology, B.S. Health & Wellness w/ toxicology minor, 112 of 120 hrs towards B.S. Biology/Analytical Chemistry Degree

Livelink Administrator, Causeway Collboration Administrator

Electrical Apprentice/ Skidsteer Operator/ Forklift Oper ator/ Labourer

Maintenance Technician

Experienced CAD-GIS Professional/Consultant with years of experience in Autodesk design softwares such as AutoCAD, Civil 3D, Map 3D, MapGuide Enterprise and Raster Design.

Marine Geologist with experience in Bathymetric, Oceanographic, Geophysical and Geotechnical Data Processing and QA/QC. Proficient in MicroStation, uSMART and InRoads mapping softwares.

I have the qualifications and experience you are seeking. I am certified as a Journeyman Refrigeration Mechanic, Journeyman Electrician, and Controls Technician. My experience includes over 17 years in construction and service of mechanical systems.

cnc edm machinist over 8 years of experience

geological,geotechnical and hydroegeologiacl investigations

Rangeland Ecology and Management Degree

An excellent communicator with a definite can do attitude having over 12 years experience in the fire protection industry. First class knowledge and Experience fire training and in all aspects of fire-fighting and emergency rescue. Currently responsible for the instruction of CAA and NFPA accredited

Mining Engineer, Quarry Engineer/manager, Explosives engineer, site superintendent for explosives plant

1 2 3 4 5 6 [ 7 ] 8 9 10 11

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out