Resume - Industrial electrician

Misco Jobs

Resume #69444

CONTACT INFORMATION:
View contact information...

INDUSTRIAL TECHNICIAN

MAJOR IN ELECTRICAL TECHNOLOGY

OBJECTIVE: To acquire a well-suited position that will enhance my capabilities in actual practice and will boost my technical knowledge and abilities in a competitive company dealing with electronics, electrical and general manufacturing.

STATEMENT OF QUALIFICATIONS:

- Able to read and interpret electrical and electronic designs and specifications
- Knowledge in advance and modern electrical/electronic applications such as control and automation
- Performs Troubleshooting of electrical and electronic device and components
- Familiar and can operate industrial machines such as Computer Numerical Control Lathe (Tsugami, Fanuc and Citizen), Compression and Injection Machines.
- Knowledge in PREVENTIVE MAINTENANCE, Planning and Organization
Of process and procedures.
- Able to lead and perform supervisory responsibilities acquired thru trainings and field experiences
- Able to plan and initiate studies to reduced cost to boost profitability
- With knowledge in QIP standards involving qualification testing and calibration
- Able to work on/and understand ISO 9001 QMS and ISO 14001 EMS requirements and performs internal auditing acquired thru trainings
- Able to handle hazardous chemicals and initiate emergency actions
- Able to conduct budget monitoring and utilization and control
- Can work with minimum supervisions
- Able to observe safety practices in a hazardous working environment
- Honest, Hardworking and flexible
- Fast learner and Values motivated
- Computer Literate

WORKING EXPERIENCES:

Company: Al Khalefa factory for metal industry (RIYADH)
September 2000 to present

Position: Maintenance Technician (Electrical, Electronics,Mechanical, and Chemical)

Nature of Work:
- In-charge of over-all plant facilities maintenance
- Design and improvement for new products
- Coordination with suppliers of machines for countinous efficiency of equipments.
- Purchasing of Maintenance supplies and consumables.
- Supervising trainee for production and technicians.
- In-charge of countinous maintenance activities and improvements

Company: FDM TOOLS
August 2004 to June 2005

Position: Field Sales Technician

Nature of Work:
- In- Charge of After sales repair and replacement of consumable materials.
- Attending service calls for consumer seeking for product assistance.
- Training In-charge for company technicians for proper use of consumables.
- Advertise new products thru demonstrations and seminars.

Company: SANKYO SEIKI PHILIPPINES MFG. CORP. (SBMA)
July 2002 to August 2004

Position: Technician 1(Engineering Maintenance) July 2002

Nature of Work:
- Performed preventive maintenance and repair of production machines such as
CNC, BNC, EDM, BARREL, COATING, WASHING, U-SONIC, TAPPING, STAMPING, DIE CASTING, BLASTING and numerous modern equipment used in production lines.
- Performed calibration of several measuring and inspection equipments.
- Monitored machine efficiency and restructured maintenance to simplest effective organization.
- Undergone several trainings and also conducted trainings among co-workers with several past learning's and work experiences.
- Assigned as department representative for safety committee, ISO 9001 QMS development and ISO 14001 EMS development
- Developed a well systemized and effective scheduling of machine preventive maintenance.
- Handled 10 technicians in six months after regularization.
- Handled fabrication and repair machines such as LATHE, MILLING and SURFACE GRINDING Machines

Position: Technician 2 (Leader, Engineering Maintenance) February 2003

Nature of Work:
- Assigned as Tool Qualification and Control
- Inspected PCD and Natural Diamond Tools before issuance to line.
- Actually Test cutting tools and formulate parameter adjustment to minimize machine downtime.
- Contacted various suppliers to have options in quality pricing and delivery.
- Coordinated with Japanese counterpart for continual support and coordination in tool inspection and design
- Entrusted to handle confidential Designs and drafts of tool drawings.
- Localized expensive items which can be acquired at lower cost.
- Handled 5 skilled Technician
- Undergone training in handling UNIVERSAL TOOL GRINDING MACHINE to contribute and develop in-house bit grinding.

Position: Sr.Leader (Engineering Control Dept.) August 2003

Nature of Work:
- Assigned to Lead and Handle Parts Tool Control
- Monitor Budgeting and line expenses based on formulated database linking
All consumption to attain cost per piece of a finished unit.
- Direct reporting to Sr. Manager on Production Consumption and target results
On expenses versus line output to indicate loss or gain in the department
- Localized all consumables to reduced importing cost and minimized lead time

Company: RCM Manufacturing Corp. (SBMA)
November 1999- June 2000

Position: Lead Trainee/ Asst. to Engineering and Maintenance Supervisor

Nature of Work:
- Performed Supervisory responsibility among co-trainees
- Undergone and conducted production lectures and trainings
- Maintained assembly and molding machines and sophisticated industrial machines involved in manufacturing of medical mask.
- Maintained Electrical and electronic control devices
- Maintained Centralized HVAC
- Designed and Installed security cameras, door sensors and Line activated entrance
- Trained to reorganize and modified production techniques to its simplest effective form
- Assigned as department purchaser for supplies and materials
- Conducted Inventories on supplies and materials
- Monitored production related problems and initiate corrective plans
- Prepared department weekly reports of Engineering and Maintenance
- Installed intercom and LAN lines for communications and networking
- Trained in fire fighting techniques
- Installed High Voltage Generator

Company: National Power Corporation
Masinloc Coal-Fire Thermal Plant

Position: Student Trainee
Electrical Division

Nature of Work:
- Analyzed and modified Japanese Standard circuitries to local standards
- Performed Power Generation Maintenance
- Repaired and Maintained Circuitries involving power generation control
- Performed Gauge and Monitor Check-ups
- Installed Sophisticated equipment issued by Mitsubishi Heavy Industries
- Performed Radio Control during maintenance procedures inside the generation room
- Designed building and power system distribution under the supervision of Mitsubishi Heavy Industries Limited
- Filed Important Records and documentation for references
- Coordinated with NPC senior officers to ensure that assigned task and SOP's are followed

Company: Department of Interior and Local Government

Position: Elected Official

Nature of Work:
- Assigned as Council Treasurer
- Conducted Information drives and counseling
- Submitted resolutions for improvement and development of youth oriented activities.

EDUCATION:
Scholar at Meralco Foundation Institute –Olongapo City Campus
June 1997-March 2000
INDUSTRIAL TECHNICIAN MAJOR IN ELECTRICAL TECHNOLOGY

PERSONAL INFORMATION:
Age:…………………………………………………..27
Sex:…………………………………………………..Male
Date of Birth:………………………………………...December 25, 1980
Place of Birth:………………………………………..Sta. Cruz, Zambales
Civil Status:………………………………………….Married
Religion:……………………………………………..ISLAM
Nationality:…………………………………………..Filipino
Height/Weight:……………………………………....172 cm. /75 kg.
Languages Written /Spoken…………………………English,Tagalog,Zambal

CHARACTER REFERENCES:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 301 to 350 of 531)

Go to Search Parameters...

Brief Description

Senior Process Engineer with 13 years of Experience in Petrochemical and LNG process

First Aid Attendant and Field Supervisor Familiar with drilling rig and service rig operations. Have some hours experience on a variety of machinery. Have proven abilities in first aid. Have proven leadership skills.

CMA (USA), ACIA (USA), ACMA.Internal/ext audit,budgeting and forecasting, project execution and evaluation, financial reporting,Accounts finalization (IFRS & US GAAP), Financial Analysis, Control self assessment, ERP implementation & dealing for financial arrangement.ERP SAP/Spiridon/Atlantis

To obtain a 2nd class welder/boilermaker position that utilises my vast experience as a welder and my experience with steel fabrication.]

HSE Mechanical Engineer. Quality, Safety and Environmental issues skills.

Diverse background in construction, logistics, remote location activity that can be used to meet your company's immediate and long-term needs. 15 years of increasing responsibilities in the construction industry. Multiple job responsibilities including blueprint reading and project layout.

Expertise in handling instrumentation systems like Inlet Gas Metering Systems, ABB & DANIEL Gas Chromatographs, Analyser Management and Data Acquisition Systems, Process Gas Analysers, Process Monitoring Field Instruments and Custody Transfer Equipment. with proven abilities in reducing downtime.

Working in construction for 15years,now working in engineering and industrial rope access

A Senior Inspector with more than 20 years extensive offshore/onshore activity in the Oil, Gas, Petrochemical and Nuclear Industries

MECHANICAL ENGINEER HAVE MORE THAN 9 YEARS EXPERIENCE WITH WITH RANGE OF EQUIPMENTS . IN MY RECENT JOB, I AM RESPONSIBLE ABOUT SCHEDULING AND PERFORMING TH PREVENTIVE AND CORRECTIVE MAINTENANCE OF TWO VESSELS AND OIL POLLUTION CONTROL EQUIPMENTS .

Career in logistics management during the past ten years. Operational background from the ground up with cargo airline, third party logistics provider, freight forwarding, marine and air cargo charter, and oil & gas industry experience in remote locations, namely Alaska and Russia / FSU.

Rigger crane op scaf

Thirty years as city of Winnipeg Fire Paramedic Service working through the ranks to a position of Captain . Knowledge of field and operation within emergency field.Experience in organizing and directing personnel. Extensive training in safety sector as National Construction Safety Officer and Consc

hnician/manager with over 15 yrs experience in train scheduling and safety. Expertise in train circulation graphing, train scheduling, and statistical analysis of safety and performance. Strong mathematical, analytical and problem-solving skills; demonstrated leadership; sharp eye for detail.

I am Mechanical Engineer with 7 years experiences in Engineering and Management

I am a Mechanical Engineering working in a Service company. I have two Msc one of them in Oil and Gas Engineering. I consider myself as a multi skilled Engineer

Experienced construction project manager with heavy background in petrochemical production operations

With a Master degree in Remote Sensing and GIS, Bachelor degree in Information Technology, as well as 5 years of working period, I have programming experience in ESRI ArcView, ArcSDE, ArcIMS, ArcObjects, ESRI ArcGIS Server (.NET), ERDAS, MapServer, MapGuide

Industrial Projects Management ,Purchase / Supply Chain Management,Business Development,,Material Management

Professional bilingual Engineer with, mining, constuction, and maintenance experience

Recent graduate seeking challenging environmental science position

A highly qualified Multi Disciplined NDT Inspector, PCN UT Level 2 (3.1,3.2,3.8,3.9), with a high level of expertise in a variety of related aspects reference to NDT, within the Onshore and Offshore Oil and Gas Industry gained over the last 10 years within major organizations, .

Industrial Electrician 20 yrs. experience in automated industries. PLC, instrumentation, construction, commissioning and maintenance / troubleshooting

Seeking Chemist or Laboratory Technician Position-will relocate

I am an analytical, dynamic team player. I have a good sense of judgment, and a great eye for detail. I have the ability to adapt quickly to new priorities and challenges.

Heavy Mobile Equipment Mechanic/Welder/Driver

Civil Engineer

Senior project planner schedule with 12 years heavy industry and construction projects experience ,professional in using MS Project,Primavera P3&P5,MS office,CMMS systema like SAP R/3 , Maximo. Strong technical background , project management and cost control, contract and claim adminstration

Seasoned expat. Strong broad-based tech skills and extensive project O&M exp in frontier third world environments. Road const, water rehab, airports, infrastructure rehab. Extensive EPL/EPC exp as Project Eng.

Management , strategic management , marketing +EXPERIENCED PAINTER !!!

IT & Technical Facility Project Manager, Systems / Application Design, Development, Deployment, and Integration Manager - Data Centers, Contact/Call Centers, Hospitals, Renewable Energy Sources and Systems, "Green" Engineering/Construction, Clean Energy Technology, Energy Managment Systems / BAS

Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre-commissioning Engineer, Commissioning Engineer, Start-up Engineer, Process Engineer, Chemical Engineer

Detail oriented Instrument and Controls technician seeking international opportunities

Industrial electrician

Pro-E, Unigraphics, Solidworks,A utocad

Mechanical Engineer, 12 Years Gulf Experience In Maintenance Department

Sdw

A Dedicated Occupational Health & Safety Professional and Certified Safety Trainer

12 years experience in instrumentation mining processing plant.holder of a craft certifitecate in process control instrumentation.

Office Programs, Internet Programs, Programming Languages, high communication, hard worker, analytical and researching.

Experienced in construction and repair of recovery and power boilers, exchangers, vessels, light and heavy plate work, basic pipe and structural fitting, as well as work on mild steel, stainless, and aluminum.

I am an undergraduate at the College of William and Mary majoring in business and geology. I have worked in aggregate quaries durring summers in a number of different jobs. I am certified as a QC lab tech by VDOT, I can operate mobile equipment, repair plant equipment, and geotechnic wor

A graduate of a degree in Bachelor of Science in Chemistry and having passed the Licensure exam for Chemists given by the Professional Regulatory Commission. Have five-year meaningful experience in Analytical Chemistry.

Livelink Administrator, Causeway Collboration Administrator

Electrical Apprentice/ Skidsteer Operator/ Forklift Oper ator/ Labourer

Maintenance Technician

Experienced CAD-GIS Professional/Consultant with years of experience in Autodesk design softwares such as AutoCAD, Civil 3D, Map 3D, MapGuide Enterprise and Raster Design.

Marine Geologist with experience in Bathymetric, Oceanographic, Geophysical and Geotechnical Data Processing and QA/QC. Proficient in MicroStation, uSMART and InRoads mapping softwares.

I have the qualifications and experience you are seeking. I am certified as a Journeyman Refrigeration Mechanic, Journeyman Electrician, and Controls Technician. My experience includes over 17 years in construction and service of mechanical systems.

cnc edm machinist over 8 years of experience

1 2 3 4 5 6 [ 7 ] 8 9 10 11

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out