Resume - Timed served Mechanic with safety certification and good leadership skills

Misco Jobs

Resume #77123

CONTACT INFORMATION:
View contact information...

As a former military mechanic with the Royal Electrical and Mechanical Engineers (R.E.M.E) I have a sound technical knowledge regarding the inspection, maintenance and repair of Diesel engines, B vehicles and tracked plant. Combined with the management and organisational skills that I have developed over the last 12 years both within the military and from setting up and running my own business, and also from handling small teams with a strict deadline, I bring with me both the experience of implementing health and safety on the shop floor and in arduous working environments and skill set to undertake various positions. Having gained certification in both OSHA and NEBOSH it has brought together my skill set and will allow me to progress further my health and safety portfolio. I have recently been accepted into the International Institute of Risk and Safety Management (IIRSM) also I am studying for my HNC in mechanical engineering ( correspondence course ).

Work Experience

Techno Service Nederland (T.S.N) - Current Position.

* Mechanic.
Service and general maintenance, of large vehicles. ( PSV)
Leyland DAF, Mercedes, Scania,

General Dynamics Land Systems. November 2007 – September 2008

* Battle damage repair of STRYKER variants (Middle East)
Working with a small team, rebuilding battle damaged STRYKER vehicles, within a large mechanical workshop.
Receiving vehicles with considerable combat damage, cleaning to remove any bio hazard materials, stripping the vehicle ready for hull reconstruction and a full rebuild to factory standard for resale to the US military. Due to the inherent risk involved from unexploded munitions, bio hazard and standard industrial risks, I was responsible for ensuring that a safe system of work was developed for each individual vehicle. Initially the vehicle was treated as a confined space and access restricted to only essential workers. All completed to a strict deadline to ensure immediate return to combat troops, and realising maximum profit from the task undertaken, with the minimum work week in excess of 80 hours in 30+ degrees.

TXM Recruitment- (ABRO-Sennybridge) – August 2007 – September 2007

* Service and repair of British Army equipment
Working independently within a busy workshop completing the mandatory regular servicing, repairs and major assembly replacement for the Army units. The workshop strictly enforced its health and safety policy and maintained a high standard of work at all times.

Allegis group: - April 2007 – August 2007

* Development and implementation of generator set maintenance schedule US military Germany.
Developing the maintenance schedule for an aviation unit within the U.S military and implementing it with the aim of completing the contract within 18 months, using both military and civilian workers from the local economy and overseas. The role involved tracking the equipment, building a database to incorporate both regular service intervals and complete overhauls within budget and time constraints permitted by the military, ensuring that equipment was available at extreme short notice for battle damage replacement.

Self employed (Al's ice cream) January 2005 to February 2007

* Set up and run a successful ice cream vending business.
Started Al's ice cream as a project to develop my business skills, starting with a garage full of second hand equipment I fabricated a vehicle and built up a comprehensive business plan and went on to run a profitable business on a small scale for two years.
I sold the assets for profit and wound the business up to return to a mechanical workshop environment.

Parts supply company (John Rickard Autos) January 2002 – December 2004

* Implementing service schedule- providing the company with 100% availability of delivery vehicles by providing a service schedule designed to work within a fast moving company.
* Technical advice – providing advice for customers on the options available for the service equipment and specialist tools available for a wide range of non commercial vehicles.
* Customer relations- Face to face contact with customers with regards to quality of service and deal with any issues they may have with the invoicing.

British army (Royal Electrical and Mechanical Engineers)
December 1995 – June 2001

* Stand in artificer vehicles Bosnia 1999- Ran a Light Aid Detachment for a Scimitar squadron having to maintain 100% availability on the tracked armoured vehicles for operational duties.
* Challenger MBT – service, recovery and repair of running gear and main assemblies.
* CVR (T) – Inspection, service, recovery and repair of every aspect of this tracked vehicle including the ability to strip and rebuild TN15 epicyclic gearbox. Also a member of the dieselisation team tasked with converting the J60 petrol driven vehicle to the Cummins diesel.
* L/Rover – inspection, service, recovery and repair of every aspect of the vehicle.
* 430 series of vehicles, Leyland daf, HVM Stormer and various other vehicles and equipment.
* Junior Military Certificate (JMC) junior management course in the management of people in arduous conditions, workshop environments and teaching/instructor skills.
As a junior NCO (non commissioned officer) within the R.E.M.E my role was varied and demanding ranging from maintenance within a large industrial type workshop to recovery of vehicles from mine fields in the former Yugoslavia. Also as an NCO I would be responsible for a team of men to undertake the above tasks, while maintaining high level of quality, also ensuring health and safety regulations were adhered to in the workshop environment.

Qualifications

* City and Guild motor vehicle craft
* R.E.M.E Certificate of trade proficiency
* NEBOSH IGC Certificate (to be confirmed)
* OSHA safety officer
* OSHA 30-hour General industry safety and health
* OSHA 30-hour Construction industry safety and health
* Medic first aid ( CPR )
* Medic first aid ( Blood borne pathogens )
* Basic fire warden as per NFPA standard
* Crane operators certificate of competence o Gantry o AFV 434 HIAB
o B-ford 8t CALM (ATLAS)
* Part 2 signals RAC AFV
* Junior military certificate ( military junior management and instructor/teaching skills )
* ADR-Vocational training certificate for drivers of vehicles carrying dangerous goods-
Other than in tanks class 1, 2 and 3. ( expired 27/11/2002 )
* GCSE ( Maths, Chemistry, Biology, Physics, English, Welsh, Art, Geography, CDT)
Relevant personal experience

* Initial planning, funding and logistics of Cape to Cape challenge, racing from Nordkapp, Norway to Cape Tariffa, Spain. (Winning team)
* PADI Advanced open water diver
* Integral part of extensive over landing expedition to Southern Africa. ( Kenya, Tanzania, Zambia, Botswana and South Africa ) Initial vehicle procurement, full expedition service and maintenance and local parts purchasing within budget limitations.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 546)

Go to Search Parameters...

Brief Description

I am currently working with the National Environment Agency as an operation engineer in an incineration plant. Had obtain Degree in Electrical Engineering, and is a Australian PR

Recent MBA grad with spl in Asset Mgt; bachelors in IT;3 yrs wrk exp varied business segment

First Aid Attendant and Field Supervisor Familiar with drilling rig and service rig operations. Have some hours experience on a variety of machinery. Have proven abilities in first aid. Have proven leadership skills.

Im currently an engineer in ghana in africa for a caterpillar dealership working mainly on power generation all over ghana including 2 mine sites. My duties include breakdowns servicing and maintenance and major overhauls . I also teach locals and supervise them .

Biomedical Engineer

Experienced Underground Blaster w/ 13 + years Experience in Construction/Quarry

Procurement specialist in the Oil & gas Industry with 9 years experience of procurement/buying/contracts/expediting.

Geologist

A Senior Inspector with more than 20 years extensive offshore/onshore activity in the Oil, Gas, Petrochemical and Nuclear Industries

Rigger crane op scaf

20 years in the Navy I worked as a Supervisor/Quality Assurence/Electronics

QA/QC IN POWER, PIPE FITTER, STRUCTURAL FITTER, AND HEAVEY AND LIGHT EQUIPMENT OPERATOR

My experienced includes hydrocarbon analysis, pore pressure detection, lithology identification, and subsurface evaluation. Drilling experience on directional, sidetrack, vertical, and geosteering wells, with various drilling fluids, throughout the US and Gulf of Mexico.

Process/Electronic Technician

Mechanical technician - rotating equipment, pumps, compressors, heat exchangers, gas, petrochemical industry, valves offshore survival BOSIET. Hazardous area

Fire Fighter I & II (Accredited at SAESI), BAC (Registered at HPCSA)

Administration, Marketing, Operations & Computers

Timed served Mechanic with safety certification and good leadership skills

Oil & Gas Land Title, Leasing, Right of Way, Consulting & Reporting

Industrial Projects Management ,Purchase / Supply Chain Management,Business Development,,Material Management

I have completed CA - Inter and currently a Chartered Accountant - Finalist from Institute of Chartered Accountants of Pakistan. I am working with Ernst & Young Global Limited in Karachi office for the last 4 years and currently my designation is Senior Auditor.

Over 08 years experience in IT/IS with around 04 years of expereince in JD Edwards implementaion in technical and funtional role, proficient in coordinating overall project execution to ensure inter-project dependencies are properly identified and managed, familiarity with Project Management methodo

Senior project planner schedule with 12 years heavy industry and construction projects experience ,professional in using MS Project,Primavera P3&P5,MS office,CMMS systema like SAP R/3 , Maximo. Strong technical background , project management and cost control, contract and claim adminstration

Seasoned expat. Strong broad-based tech skills and extensive project O&M exp in frontier third world environments. Road const, water rehab, airports, infrastructure rehab. Extensive EPL/EPC exp as Project Eng.

Heavy Eqiupment Operator,Construction,

Ms-word,Ms-Excel,Proficient in management,General HSE certification, HSE Competency Development Course Level 3

If you need a dedicated expert heavy equipment/drill rigs/are welder/fab/design, hydraulics, air compressors, all around field/shop management, i can design/build & repair anything with or without a big budget, will work on contract are as needed!!

Cummins Sales & Service Pakistan (Power Generation)(Nov2007 – to date)Mining Experience(2004-2007):

Daily rotational positions including, Operation of Kranco over-head charge crane with 15 and 50 ton hoist, Kranco over-head make-up crane with load lifting magnet & clam shell bucket, Deck operations for 2 Brown Boveri 55 ton coreless furnaces

Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre-commissioning Engineer, Commissioning Engineer, Start-up Engineer, Process Engineer, Chemical Engineer

iosh managing safely and osha in construction safety and health qalified hse officer with 9 yrs experience in safety. other trainings attended: basic rescue, work safely at heights, scaffolding, first aid, fire fighting etc. work experience in india and middle east in construction projects.

Geology degree and Geology Honours degree. Two years exploration geology experience. Currently busy with Masters degree in Hydrogeology on part time basis. Working as geologists at Hydrogeology company.

Detail oriented Instrument and Controls technician seeking international opportunities

20 years experience in Industrial Electronics, Electrical,Mechanical, Pneumatics, Hydraulics

Involved in all construction activities including fabrication , installation and control off all structural items.Steel structural estimates include, pipe-racks, elevated pipe supports, pump shelters, access platforms, handrails, et

Mechanical Engineer, 12 Years Gulf Experience In Maintenance Department

I am a current registered EMT Paramedic Assessor and First Aid Instructor. I am now working in a local company as a Safety cum Fire Safety Manager. My responsibilities include coordinate and conduct training, investigate and writing incident report, ensure safety at workplace comply.

Dynamic Health & Safety Coordinator Looking For Work In Mining, Heavy Construction Or Oil Industry

im interested in doin marine and i spoke wel in english and i know hindi also and my specification is doin work in any circumstances

12 years experience in instrumentation mining processing plant.holder of a craft certifitecate in process control instrumentation.

Finance, Investment Banking, Management consulting

Experienced in construction and repair of recovery and power boilers, exchangers, vessels, light and heavy plate work, basic pipe and structural fitting, as well as work on mild steel, stainless, and aluminum.

I am an undergraduate at the College of William and Mary majoring in business and geology. I have worked in aggregate quaries durring summers in a number of different jobs. I am certified as a QC lab tech by VDOT, I can operate mobile equipment, repair plant equipment, and geotechnic wor

Commissioning, servicing, maintenance, diesel gensets, engine-alternator alignments, overhauling diesel engines.

Service and maintenance of various heavy equipment

Twenty-two years in leadership and management with ten years experience in the Petrochem/Paper Mill industry. Ten years in health and safety in the fields of general construction, maintenance, Turn Around/Shutdown. Able to identify at risk behaviors, trends, and policy infractions through observati

Electrical Apprentice/ Skidsteer Operator/ Forklift Oper ator/ Labourer

Maintenance Technician

Experienced CAD-GIS Professional/Consultant with years of experience in Autodesk design softwares such as AutoCAD, Civil 3D, Map 3D, MapGuide Enterprise and Raster Design.

Marine Geologist with experience in Bathymetric, Oceanographic, Geophysical and Geotechnical Data Processing and QA/QC. Proficient in MicroStation, uSMART and InRoads mapping softwares.

1 2 3 4 5 6 7 [ 8 ] 9 10 11

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out