Resume - Safety Officer, Process Supervisor and Marine Engine Driver and experienced in P...

Misco Jobs

Resume #77445

CONTACT INFORMATION:
View contact information...

April 2008 to October 2008 (Six month contact)
Yanbu Petrochemical Company (Yansab)
Yanbu Al-Sinaiyah. Kingdom of Saudi Arabia.

Commissioning Safety Officer
As a focal person from Safety, Health and Environmental Department to manage and control the hazards and high risk activities during simultaneous construction, pre commissioning, commissioning and plant start up to avoid any injury, equipment damage, impact on environment and community health adversely

* Participate in daily coordination meeting and monthly safety meeting.
* Participate in progress meeting, preparing and issue of permit to work.
* Review and update Safety, Health and Environmental procedure.
* Making certain that operators and contractors are well trained and made aware of various activities, regard to safety, health and environment. Training on safe working culture, emergency drill and etc.
* Safety induction for new operators and contractors.
* Participate in preparing job safety analysis.
* Participate during incident investigation.
* Identify and control any conflicting activities at designated Interface Area within owner and main contractor during pre commissioning and commissioning stage.
* Liaise with Fire Department for unannounced, announced or desktop exercise "Emergency Drill" to operators and contractors.
* Liaise with Environmental Department for schedule waste management
* Liaise with Occupational Doctor for operator's medical record such as hearing test, physical fitness, drug and alcohol analysis and etc.
* Liaise with Technical Department for licensing on fired and unfired pressure vessel, radiation sources and lifting machinery.
* Liaise with Local Authority during machinery installation and performance test prior to get approval for Certificate to Operate
* Purchase, control and issuing personal protective equipment to operators

1st January 2002 to 30th March 2008
Acrylics Complex, BASF PETRONAS Chemicals Sdn Bhd
Kuantan Site, Pahang. Malaysia

Operation Safety Coordinator
As a focal person from safety, health and environmental department to manage and control the hazards and high risk activities during normal operation, plant shutdown or turnaround to avoid any injury, equipment damage, impact on environment and community health adversely

* Provide overall support and coordinate acrylic complex staff resulting in safe operation of the BASF PETRONAS Chemicals Complex.
* As a secretary during monthly safety committee meeting.
* Review and update Safety, Health and Environmental procedure.
* Making certain that employees are well trained and made aware of various activities regard to safety, health and environment.
* Liaise with fire department for unannounced, announced or desktop exercise "Emergency Drill" to operators and contractors.
* Liaise with environmental department for schedule waste management.
* Liaise with technical department for licensing review on fired and unfired pressure vessel, radiation sources and lifting machinery.
* Liaise with occupational doctor for operator's medical record such as hearing test, physical fitness, drug and alcohol analysis and etc.
* Liaise with local authority during plant turnaround prior to get approval for certificate to operate and monitoring turnaround activities
* Safety induction for operators, training on safe working culture, emergency drill, waste management and etc
* Attend progress meeting, preparing and assist shift supervisor for issuing of permit to work, systems isolation and normalization

1st.June 1999 to 31 Dec 2001
Acrylics Complex, BASF PETRONAS Chemicals Sdn Bhd
Kuantan Site, Pahang. Malaysia

Senior Executive Production
As a focal person from operation department to maintained smooth and safe operation of production plant and machineries in order to meet the required production levels to achieve the daily targets.

* Act as On Scene Commander during emergency
* Perform daily operation of producing 520 metric tonnes of acrylic acid and despatch to port storage.
* Manage and control the hazards during normal operation, shutdown and turnaround to avoid injury, equipment damage, impact on environment and community health adversely.
* Perform permit to work issuing and closing, equipment isolation prior for maintenance and normalization upon job completed.
* Schedule waste and contractor's management
* Responsible in yearly performance and evaluation for the operation technician

1996 to 1999
YTL Power Services Sdn Bhd
Paka Power Station, Terengganu. Malaysia

Operation Controller
As a focal person from operation department to maintained smooth and safe operation of electrical power plant in order to meet the required electricity production targets.

* Responsible during commissioning and start-up activities.
* Perform daily operation of generating 800 megawatt electricity power for the national grid.
* Maintain smooth and safe operation of 4 units of gas turbine, 2 units of waste heat recovery boilers and 2 units of steam turbine, and others auxiliaries system.
* Start up and Shutdown according to load schedule and liaise with national load dispatch centre prior to synchronize or de synchronize power to and from the national grid.
* Perform permit to work issuing and closing, equipment isolation prior for maintenance and normalization upon job completed.
* Cooperates with system dispatchers relative to load voltage and frequency changes, adjusting controls of generating accordingly to operating schedule.
* Maintains daily log, record of all dispatcher and attend trouble calls.
* Responsible in yearly performance and evaluation for the operation technician

1992 to 1996
MTBE Malaysia Sdn Bhd. (PETRONAS)
Kuantan, Pahang. Malaysia

Boiler Operator
As a focal person from operation department to maintained smooth and safe operation of high pressure boilers and waste heat recovery boiler and others auxiliaries systems.

* Perform daily operation of 3 unit's high pressure steam boilers and 1 unit of waste heat recovery boiler. Maintain smooth and safe operation, start-up and shutdown.
* Produce demineralised water and managed waste water treatment plant.
* Responsible in preparation for equipments prior to hand over for maintenance.
* Maintain weekly test run to all safety equipment in order to confirm healthy and ready to be used.

1979 to 1992
Malaysian International Shipping Corporation
Jalan Conlay. Kuala Lumpur. Malaysia.

Marine Engine Driver
Responsible for installation assessment and sign off, ensuring adherence to company required standards. Completing and performed unit acceptance test.

* To start Electrical Generator, Air Compressor, Pumps, Boiler, Main Engine and others auxiliaries system
* Performed sea trials for performance test with witness of ship building warranty engineer
* Performed engine room watch keeping hours.
* Collecting and analyzing data.
* Perform smooth and safe operation of vessel during navigation, berthing, anchorage, loading and unloading activities
* Performed smooth and safe during maneuvering and coming to alongside
* Liaise with Deck Officer for ballast and de ballast of vessel
* Prepare schedule maintenance for engine room system
* Responsible for readiness of vessel life boat and fire fighting system
* Mentor to Marine Cadet Engineer and Engine Crew.

PERSONAL SKILL

* Ability to perform field inspections, risk assessment, review, prepare procedure and handle permit to work system
* Ability to improved performance, utilizes effective follow up actions to solve employee or work related problems
* Self-development in administration and management skills
* Good in personal computer knowledge such as Microsoft Word, Excel and Power Point.
* Able to communicate at all level of people.
* Licensed and able to operate Incinerator, Steam Boiler, Steam Turbine, Gas Turbine and Marine Diesel Engine by Department of Occupational Safety and Health and Marine Harbor of Malaysia.
* Word, Excel, PowerPoint, Internet & Email

EDUCATION

2007
UTEC Consultancy and University Malaysia of Pahang
Kuantan. Malaysia
Safety and Health Officer

1998
Factory and Machinery Department of Malaysia
Kuala Terengganu
Second Grade Driver Gas Turbine and Diesel Engine

1990
Factory and Machinery Department of Malaysia
Kuala Lumpur
First Grade Driver Steam Boiler and Steam Engine

1985
Marine Harbour Malaysia, Port Kelang, Selangor
Third Class Engine Driver (Motor)

1985
Marine Academy of Malaysia. Malacca
Fire Fighting and First Aid at Sea

1977 to 1979
Marine Academy of Malaysia. Malacca
General Purpose Marine Cadet

1974 to 1976
Sekolah Menengah Tengku Ampuan Jemaah
Port Kelang, Selangor
Lower Certificate of Education Malaysia

TRAINING

7th 8th Sept to 9th Sept 2005
Successful Project Management by NTP World Forum and Institute of Professional Development and Open University of Malaysia

9th 10th Aug to 11th Aug 2004
Effective Business Writing Skills for Executive & Managers by Institute Management Malaysia (MIM)

23rd 24th July to 25th July 2002
Supervisor Development Program by Development Dimensions International
(DDI)Malaysia

6th Dec 2001
Hearing Conservation Program by Mediviron, Malaysia

25th Oct to 26th Oct 2001
Incident Investigation & Hazard Identification by Institute Petroleum PETRONAS
(INSTEP)

16th Aug to 17th Aug 2001
Environmental Management & Quality Act 1974 by Sekitar Synergy Sdn Bhd

14th July to 15th July 2000
Fundamental Knowledge Incinerator and Central Boiler by Oschatz GmbH, Germany
Incinerator and Boiler Burner Management by Mehidau & Steinfath,GmbH,Germany

14th July to 15th July 1999
Fire Fighting & Breathing Apparatus by Terengganu Safety Training Centre (TATI)

10th June to 21st June 1999
Centrifugal Compressor & Sumivac II Control by Nuovo Pignone from
Florence, Italy

1985
Marine Academy of Malaysia. Malacca
Fire Fighting and First Aid at Sea

1982
Outward Bound School of Malaysia
Lumut, Perak

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 201 to 250 of 558)

Go to Search Parameters...

Brief Description

If you are looking for a dedicated, hardworking, honest, dependable employee who can think “Out Side the Box”, see further into the future than the end of his nose and is a dedicated team player - your search may be over.

QA / QC Instrument Inspector

Mechanical CAD Design Product and Tooling Development Engineeer

Long term experienced : wanted , Painting Inspector , Paint Superintendent or Technical Sales

Trucking experience 20 plus years, good on tools, excellent mechanical understanding

Experienced electrical sales, buyer, customer service,contract negotiations,job bidder

Environmental Health Safety and Emergency Management Specialist / Safety Trainer in Oil and Gas, Petrochemical and Marine Industries with 15 years experience.

HSE Engineer with Quality experience, consultant, Mechanical Engineer

Procurement Purchasing Logistics Inventory Control Contracts Negotiations

Security Executive with massive corporate and international exposure. Expert in Afrcan matters and have massive and extensive security network in Africa.

Degrees in Geology and Environmental Studies (Minor). Experience includes: Environmental and Geotechnical Field Investigation (Soil and Rock borings, Soil and Rock classification, testing); Geologic Mapping; Construction Observation/Inspection; Data Analysis; Report Writing(geo haz, data, phase1,2)

HSE Remote Safety Medic, Offshore Medic, Emergency Medical Technician, Safety Officer

Industrial Electrician 20 yrs. experience in automated industries. PLC, instrumentation, construction, commissioning and maintenance / troubleshooting

B.E – Ceramics & MBA, having with 12 years of experience in an integrated Steel Plant Projects & Maintenance of Refractory -Applications/Installations/Selections/Inspections in India and Abroad

I am a multi tasker. I can handle working in harsh conditions. I don't mind getting out of the equipment to help the team. I am willing to relocate and/or travel to wherever the company needs me.

PhD in Chemical engineering with lots of laboratory experience including, but not limited to design of experiment. Cummulative GPA 3.52. Specialized in electrochemical synthesis.

I Mohammed Yaseen Kajee hereby wish to apply for employment through your company in the capacity of Client Projects Quality Manager, Senior Client Quality Assurance Engineer / Inspector and Client Safety Representative. I have had extensive experience in Quality Management Systems , Pressure Vesse

Experienced in deep excavations for 20 years, specializing in sewer and water and installation of large diameter pipe, as well as Mass excavation and Heavy Highway work.

Registered EU Mech. Eng w/ 15 years experience in the oil and gas environment - North America, North Africa, Middle East,. High-energy individual whose best attribute is my ability to work well with other people.

I at DK India shoulder the responsibility of showing readers the actual position of their destinations on accurately and intricately crafted maps. The scale varies from large country maps to small walk maps, which guide those traveling by foot from one tourist attraction to another

HVAC, Facilities Maintenance

Precision Millwright w/ Machinst and Electrical Background

Welding and electrical and management and mining class 32 hour certified fork lift operator

In-charge of Quality Assurance Department of company. To look after all the quality procedures in the company and insure effective implementation of ISO 9001-2000 standard, ISO 14001 and OHSAS 18001. Export Sales and Budgeting Forecasting etc.

With over 9 years of experience in U-verse (IPTV, HSIA and CvoIP) Secornd Level Technical Support (Tier 2) and Fiber Optic (Video, Voice and Data) installation, Cable TV technical communication, satellite installations, hard work, imagination and commitment, together with strong communication and in

Prventive check-up/fixin Pump of diverse kind/calibrate labs instruments/operates main instruments in a water plants

Engineer with 15 years of experience in Supply Chain, Operation, Project & Construction management

Under general supervision, I can inspect, isolate, troubleshoot and repair electrical malfunctions using various test instruments; maintain and repair programmable lighting and access systems; test electrical equipment for safety and efficiency; plan the layout and wiring of new plan

Diagonose and repaires in mechanical and electrical systems, wheel alignment etc.

I¡¦m a Canadian/ Syrian citizen with Business, Engineering, Water/Wastewater and (HSE) Health Safety Environment Background I have been working in the field of HSE (Health Safety Environment) management for past 10 years/ 5 yr Management HR BUS PR Project GS ADM OPS

I & E Inspector, Electrical GF, Lead Electrician - 20 + years experience in industrial and commercial

Safety Officer, Process Supervisor and Marine Engine Driver and experienced in Petrochemicals, Power Plant and Marine Industry

HSE Specialist

Senior Process Engineer with 14 years of Experience in Oil and Gas and Petrochemical

In addition to academic work, my experience also includes working voluntarily, part-time and full time with both local and international organizations, as you will see in my CV. My work in these organizations hinges on working at community levels in various projects and researches.

35 + year mechanic

15+ years experience as a highly motivated corporate and leisure travel consultant Able to communicate with people at all levels of responsibility. Experience with Inside Sales - successful cold calling and B2B sales and customer service Ability to successfully relate to and work with diverse peop

Twenty five years experience in Safety, Health and Environmental Inspections, Supervision and Management

Logistics, Technology, Transport and Management Professional

Highly motivated Ph.D. Chemist with a broad range of skills looking for a position that involves challenge and innovation.

I have worked in the underground mining industry for 29 years and still enjoy it. I have held many lead and supervisor positions. My last post was Mine Captain for a leading mining contractor. I like being challenged and enjoy learning new things. I can work alone being self motivated or on a team.

Apprenticeship exemption granted for the technical in-class component Levels 1, 2, 3

Mining Engineering with MBA

Maintenance, HVAC, MAnagement and Supervision, Safety

Gas turbine expert, Engineering, Rotating Equipment technician,MechanicalEngineering

Over 20 years management, construction, production and sales experience dedicated to achieving profitability and delivering outstanding customer service. Energetic professional with exceptional analytical, organizational and people skills. Strong personal ethics and integrity. Treat each customer as

30 years in the repair and maintenance of heavy equipment in both shop and field setting.. Supervision experience !

mind setter for Safety, and condition builder

Construction manager, laborer, Class A CDL Drivers license, mechanic

Maufacturing Automation

1 2 3 4 [ 5 ] 6 7 8 9 10 11 12

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out