Resume - Research Thesis on ANTENNA/RF

Misco Jobs

Resume #78215

CONTACT INFORMATION:
View contact information...

OBJECTIVE
To obtain a full time employment in the area of RF systems, Antenna design, CDMA, or any area that meets my abilities and gives me opportunities to sharpen my technical knowledge.

SKILLS
* Languages: C++, SQL, VHDL.
* Operating System: UNIX, MS Windows, MS Office.
* Simulation Software: Ansoft Designer v3.0, MATLAB, PCAAD 5.0, Modelsim, TINA Pro.
* Hands On: HFSS v10.0, CST, Anechoic Chamber.

WORK EXPERIENCE (3.5 years)
* Research Assistant, Electrical Department, San Diego State. (2 Years)
Academic Grader, Research on Instrumentation Circuits, Antennas.

* Assistant Teaching Tutor: C++ language, San Diego State. (6 months)

* Technical Support: Flextronics Software Solutions, India. (3 months)
Troubleshooting Technical Issues for US company i.e. HughesNet

* Technical Support: IBM Daksh, India (5 months)
Troubleshooting Technical Issues for US company Hewlett-Packard.

INTERNSHIPS
* Semiconductor Complex Limited, India.
Engineer Trainee ~ VHDL Implementation & Simulation (Design and Implementation of VLSI Chips in VHDL)
* Jupiter Radios TEXLA Television, India.
Engineer Trainee ~ Assembling and Testing Unit

EDUCATION
* M.S. in Electrical Engineering (San Diego State, CA) (Aug 2006-May2009)
* Bachelor of Engg. in Electronics & Telecommunication (Rajasthan University, India) (2001-2005)
Achievement: Academic Honors (73%)

RELEVANT COURSEWORK
Antennas & Wave Propagation, Advanced Topics in Antennas, Digital Communications, RF Wireless Systems Design, Coding Theory, Digital Signal Processing.

M.S. THESIS

Title
" Performance of Microstrip Patch Antennas and Arrays on Electromagnetic Bandgap Structures "

Skills Learned and Completed
* Antenna radiation pattern measurements using a simple setup.
* Network Analyzers for the scattering parameter measurements.
* Antenna Simulated: Microstrip Patch antennas with different feeding techniques.
* Used network analyzer for impedance measurement and used simple transmitter/ receiver setup for radiation pattern measurement.
* Ansoft Designer full wave analysis software for modeling and simulation of various types of planar antennas and microwave components.

Continued…

KEY ELECTRICAL PROJECTS

* PERFORMANCE ANALYSIS OF BLUETOOTH EDR WITH BLUETOOTH v1.1
Basic baseband block of Bluetooth v1.1 and Bluetooth v2.1 – EDR standards and comparison of their performance for various parameters like BER, signal to noise ratio, receiver complexity, power efficiency.

* DESIGNING OF FM MODULATOR/DEMODULATOR USING 14 STAGE POLYPHASE FILTER:-
Achieved using 14 Stage Polyphase filter. It involved the designing of Gaussian pulse to mitigate the effect of Inter Symbol Interference.

* FREQUENCY AND TIME SYNCRONIZATION IN OFDMA:-
Using short preamble in between OFDM symbols, we can achieve frequency and time synchronization and by using long preamble we can achieve channel equalization i.e mitigating the effect of channel distortion.

* BASEBAND BEHAVIOURAL MODEL FOR A BLUETOOTH SYSTEM BASED ON STANDARDS:-
A brief introduction of Bluetooth specifications is given and the background knowledge for implementation of this model on a behavioral level is also presented. In the model, synchronization in demodulation part has been focused on.

* ARITHMETIC AND LOGIC UNIT and UART
ALU can perform shifting including all other options like Addition, Subtraction, Multiplication, Division with the use of Registers.

* HEXAPOD ROBOT
It was based on control systems; a microcontroller programmed chip was used. (The Robot takes another path if any obstacle comes in front of it.)

REFERENCES (Please feel free to contact them)

1) Prof. Satish K. Sharma, San Diego State. Email: ssharma@mail.sdsu.edu 2) Prof. P. T. Kolen, San Diego State. Email: kolen@mail.sdsu.edu
3) Team Lead, Samrat SenGupta, Flextronics Ltd, India Email: sammy08@gmail.com

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 301 to 350 of 557)

Go to Search Parameters...

Brief Description

15 plus years experience in tool and equipment management, warehousing, materials management. Dependable, reliable and honest. Looking for long term employment.

Retired PAF personnel having 25 yrs of experience and also remianed as instructor.

SAP FICO consultant with 10 years experience

Seeking Chemist or Laboratory Technician Position-will relocate

Research Thesis on ANTENNA/RF

25 yrs Heavy diesel mechanic in Construction and Pipeline

Manage systems, hardware software, connectivity link, Manage Active Directory,Manage DHCP Serverý

Heavy Equipment operator

Health, Safety, Environment

Geologist with background experience in Mining and Exploration of mineral resources- gold and base metals. QAQC for sampling projects. Ability to prepare technical Exploration reports for Project Managers incl drilling proposals.MapInfo, Micro-Mine, Vulcan, MP3, MS-packages.Ore reserve calculation

HVAC, Maintance

I have been working as a Computer Technician for the past two (2) years. I received eight (8) CXC subjects and BSc. in Electronics and Communications from the University of Technology. I also have two (2) years engineering related experience working with TCom/Huawei Technologies/CLARO.

Logistics, shipping and Offshore Assistant

Driven by innovation and integrity as a member or your technical group I will be able to provide technical drafting support using the latest version of Microstation, Intergraph, Auto Cad and other GIS, ICGS software platforms. In addition, perform non-routine and complex drafting assignments, Coordi

I have 12 years experience in the South African Police ( VIP Protection , Access Control , Cime Prevention , Investigatins ) , 3 Years experience in The Private Security Industry ( Regional Manager ) and 1 year experience in conflict zones ( Baghdad , raq as a Mentor / Advisor )

Specialized in International Human Resources, I am currently in Dubai responsible for personnel management in a multicultural environment. In France, I also actively participated in Rio Tinto Alcan to the setting up of a European HRIS.

I work offshore in the Gulf of Mexico contracted by oil and gas companies to monitor compliance and compile monthly reports. I work 12 or more hours per day 7 days a week and am used to physically challenging work.

I started my career in 1991. I am a qualified fitter & turner (trade) Currently working as a workshop foreman. Did courses in inspection (QC) and management.

londery worker ,waiter & data feeding

I have been involved in developement and implementation of various safety programs and helping create safety cultures within organizations on and off the job. My most recent assignments have been in UAE and Mexico as a HSE Manager and I would like to continue in this role.

Experienced Automation/Process Control Engineer

Windows NT4.0, Windows 2000, Windows XP professional, home edition, Windows 2003 Enterprise edition server, Windows 2003 Standard edition server, Windows 2000 Advance server, Novell Netware LAN & Windows for Workgroup. RIS server, DNS server, DHCP server. Symantec server (NT, 2000, 2003 server),Rout

Master Mariner and have experience as Senior Officer on LPG Carriers

1 year Wellsite Geologist/Mudlogger; 7 months experienced Varian Gas Chromatography; 2.5 years experienced Staff & Project Hydrogeologist and Environmental Field Technician

10+ Years Experience PLC Programming PC Board Testing/Repair Test Point Systems

Proficient in Microsoft Office Programs; Familiar with OSHA and NFPA federal standzards; Technical Skills; Research Skills

I am interested in employment for any position where I may acquire new skills or my current skills may be fully utilized. I have experience in Crush and Convey, Leaching, Haulage, Safety and Environmental areas. Upon my employment I will bring a safe and positive work ethic to your company.

My experience have given me a broad adaptation of works in various areas. I can and will succeed in almost every area of work as I am a practical and fast learner. I have sufficient knowledge in computer basics and literacy. I am a fast typist and can create text documents

ms word,internet marketing,power point,quality control assuransce,NIM nigerian institute of management , NISLT nigerian institute of science and lab technicaince , PGD post graduate diploma in industrial chemistry , HND in polymer technology

I am electrical diploma holder,having ten years experience in variety of field like textile company,power plant and research centre.I desire to settle in Australia for betterment

Free! In excess of 15 years Health and Safety experience. Strong coaching. Leadership skills and experience in BBS. Experience includes large 3D programs in all types of terrain including mountains, Arctic, and cold weather conditions.

Survey Technician/Mapper/Drafter

Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)

Highly qualified HSE Contractor looking for overseas positions.

Environmental Consultant (Engineer/Scientist)/Geoscientist

pdms 3d cad autocad cadworx sr designer mechanical drafter field engineer walkdown

Journeyman Heavy Equipment Operator/Foreman 10 yrs exp.

Results-driven Industrial Maintenance Planner/Scheduler offering 15+ years of extensive hands-on industrial maintenance experience, committed to efficiently manage and plan machine maintenance.

Livelink Administrator, Causeway Collboration Administrator

PARAMEDIC(ADVANCED LIFE SUPPORT)/FIREFIGHTER/ EMT RESCUE TECHNICIAN

I have project management experience in all phases of pump installations, well development, geothermal installs. I can run almost any type of equipment. I have worked at geothermal powerplants and mines all over the western states. I all keep my crews safe and productive. Can work well with others.

i am having 13 years of experience in condition monitoring and in plant inspection includes vibration, vibration analysis, balancing, ndt, coating & corrosion and welding inspection.

I am a qualified diesel fitter with 5yrs exp and I trained with a caterpillar dealer.

Product Specialist - repair of office equipment

4 years experinece in electronincs and electrical related works and in embeddeded sytems

Young Mining Engineer (short experience in geophysics - jr Observer, HSE Officer, and coal mines - trainee)

All activities relating to Electrical Construction projects such as installation & commissioning of Electrical equipments namely generator, Transformer, HT. LT panel, Laying of power, Lighting cables & Lighting Fitting

Would like to personally discuss my qualifications and personal resume in greater detail and look forward to scheduling a personal interview with you in the near future. I have my T.W.I.C. Industrial safety Training. 24 hour Hazwoper/Forklift Certification. Confined Space Training;

I am a Civil Engineering Graduate from NED University, Karachi, Pakistan and hold a Master's degree in Environmental Engineering from USA. I have extensive professional consulting experience spanning over 10 years of EHS management and controls, involving Due Diligence reviews and audits, Environme

I have 5 years as a Cad Designer using Inventor 3D and AutoCAD

1 2 3 4 5 6 [ 7 ] 8 9 10 11 12

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out