Resume - I am an Advanced Rigger of 2 years experience. I have a variety of skills inclu...

Misco Jobs

Resume #83516

CONTACT INFORMATION:
View contact information...

MARITAL STATUS: Single

NATIONALITY: Australian

LICENCES: C, LR, R, W1 Watercraft (Military)

EDUCATION LEVEL: Year 11 TEE; Ocean Reef S.H.S, W.A

Courses and Training

PASSPORT Current Australian Passport.

BOSIET/ (OPITO APPROVED) Completed all compitencies required.

MSIC Hold current maritime security card.

ADVANCED RIGGER: Completed nationally accredited courses to include beginner, intermediate and advanced rigging.
BLUE CARD/
CONSTRUCTION Hold a current Blue Card for site safety awareness on construction sites.

TILT UP PANEL/
SAFETY AWARENESS: Completed Nationally accredited course.

FORKLIFT: Completed certificate of competency for Reach/
Counter Balance forklift. Also Manitou experience.

LIGHT RIGID: License provided.

WORKING AT HEIGHTS: Successfully completed nationally accredited course

DOGMAN AND CN: Completed nationally accredited course including
Dogman and CN Crane.

E.W.P Completed nationally accredited course for EWP.

SECURITY OPERATIONS: Successfully completed TAFE requirements to obtain CERT II in Security Operations.

BATONS AND RESTRAINTS: Successfully completed a four day course conducted by W.A Prisons Rapid Response Team.

COURT SECURITY/
CUSTODIAL OFFICER: Successfully completed a three month theory and practical course involving prisoner handling and movement, courtroom and perimeter security and
W.A state and Department of Justice law.

CERTIFICATE II IN
GOVERNMENT PSP20199: Certificate received due to service in the military.

Professional Experience

MAMMOET
Pluto LNG- Woodside
October08- Current: ADVANCED RIGGER- HEAVY LIFT
Employed by Mammoet as Rigger/ Dogman for DEMAG CC-2800-1 Superlift, 600 tonne crane.
Duties include marking out ground parameters for crane positioning, set up of crane counterweights and mats, rig/ dog/ assist lift. Derig and general duties as required. Also strip, build and modify crane as necessary and be able to read lift studies, plans and engineers specifications.

Civmec Engineering
Argyle Diamond Mine
Underground Project
February08- October 08: ADVANCED RIGGER/CN CRANE OPERATOR
Employed by Civmec to work on the Argyle underground project. Works underground include, two underground crushers, pump stations, gantry crane and conveyors as well as crane operator underground. Also used as a driver for Franna cranes and conduct general lifts and steel erection on the surface as required. Also a nominated Safety Representative on this project.

Western Construction Co
CloudBreak- FMG
November 07- February08: ADVANCED RIGGER/ CN CRANE OPERATOR
Employed by WCCo as an advanced rigger in structural steel, building the FMG/ CloudBreak
Iron ore operational site. Also used as a relief driver for a variety of Franna type cranes.

Ausclad Group of
Companies
HopeDowns- Rio Tinto
June 07- November07: ADVANCED RIGGER/ CN CRANE OPERATOR
Employed by AGC as an advanced rigger in structural steel, building the Rio Tinto/ HopeDowns
Iron ore operational site. Also used as a relief driver for a variety of Franna type cranes.

Paragon Precast
Forrestfield- Perth
January 07- June07: MOULD MAKER
Employed by Paragon Precast in the manufacture of precast Tilt Up Panels used in the building industry. Daily duties involve; reading of plans, forming up for panel using timber and steel formwork, wielding of bracing and use of magnets, placing in reo cage and modifying to suite, also placing grout tubes, prop points and lifters as per plans, pouring concrete using overhead crane and kibble, concrete finishing as specified. Also required to perform repairs and modifications on site when required.

Harbourworks/
Clough- Woodside
Phase 5 Project
January07: STEEL FIXER/ LABOURER
Employed by Harbourwork/ Clough as a labourer and Steel Fixer to work on the extension of Woodside's LNG loadout jetty as part of Phase 5. Tasks involved working from a moored Jack Up Barge and working in confined spaces over water tying steel in place for mooring dolphins and the main load out jetty. labouring tasks as required.

Killarnee – Woodside
Phase 5 Project
June06 –November06: STEEL FIXER/ LABOURER
Employed by Killarnee Formwork to work on the Phase 5 project Northwest W.A. Tasks performed were those of a Steel fixer and labouring duties as required.

Macmahon – Woodside
Phase 5 Project
September05 –June06: TRADES ASSISTANT
Employed by Macmahon to work on the Phase 5 Project as a Trades Assistant. Duties included working in a variety of different roles such as Formwork Carpenter, Steel Fixer, Concrete Worker, Manitou Operator and general T.A's duties.

Damos PTY LTD
Neerabup- Perth
June04 –September05: MACHINE OPERATOR
Employed to operate and maintain 5 Sulzer Looms involved in the manufacture of vent duct systems used in underground mine shafts. Maintenance conducted was both routine daily and medium mechanical work.

Elite Pool Covers
Osbourne Park- Perth
November03 –February04: PLASTIC WELDER
Employed in the manufacture and welding of pool security screens and covers. Also conducted other factory duties including assembly of roller systems, sales and installation for clients and courier dispatch and retrievals.

Australian Regular Army
May02 –November03: COMBAT ENGINEER
Duties included construction of road works and expedient surfaces, concrete and formwork, building drainage systems and culverts. Bridge works involved medium girder bridges at both single and double storey levels using pier, link and span junction. Floating Support Bridges also used including on water retrieval and construction. Other duties included handling, setup and execution of a large range of explosives and explosives devices. Use of a range of construction equipment such as; hydraulic packs and tool attachments, cobras, compactors, chainsaws and hand tools.

AIMS Corporation
Roebourne Regional Prison
January01 –January02: COURT SECURITY/ CUSTODIAL OFFICER
Employed to escort prisoners from Roebourne Regional Prison to various appointments in security compromised locations. Other duties included security of courtrooms and retrieval of persons in custody from remote police lockups.

Bristow Helicopters
Karratha Airport
January01 –January02 RAMP STAFF
Employed to conduct both hot and cold aircraft refuels on helicopters, also conducted fire watch during take off and retrieval of aircraft once shut down. Other duties included general prep and cleaning of aircraft before and after flights.

References

Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 557)

Go to Search Parameters...

Brief Description

Bilingual Entry Level I&C Engineer

Geologist/Engineer, 4 years in environmental and information technology. Degreed in earth science and networking. Team oriented project management and support. Involvement: four mine development projects and hazardous materials. Desire a contract or permanent position.

Knowledge in repairing computer hardware and other components of the computer. Reprogram operating system of computers if required. Installing software’s needed by the computer. Troubleshooting computer problems.

Looking for o job with better condittions

Holder of BMin.Scie Degree, with two years metallurgical engineering experience in the copper mining industry, and conversant with various mineral processing, hydro, and electro-metallurgical processes. Possess good technical aptitude and skills. Hardworking, results-oriented.

Emergency fire rescue etc. Licence in France and followed of a large experience in overseas

I am a mining professional seeking expat opportunities (Contract or Permanent) in either a production or technical field. The majority of my experience has been in mining; with a technical background in Mine Surveying, and experience in Drill and Blast Engineering and Site Engineering.

Hard working, dependable, adventurous

I am an EH&S specialist to energy, industrial and commercial clients. I have experience in soil & water sampling, soil conservation, erosion control, remedation, reclamation of oilfield sites, environmental liability models, management systems and emergency response. I am an registered P. Biol.

Mechanical Engineering Technologist

Forensic reviewing and reporting, 2 years engineering pipeline company, 4 years government drugs screening laboratory, GC/MS, 10+ years non wizardry speech freedom computer environment

OSHA certify

Seeking position where more than seven years of process control and instrumentation experience in petrochemical environment will add value. Team player, succeed with organizational and supervisory skills. Willing to relocate.

Petroleum Engineer & Geologist with strong knowledge and experience working for Oil & Gas companies, Oilfield Services and Engineering & Construction Companies.

Experience in construction and as a trades assistant to carpenters, builders, electricians, bricklayers. Have exerience in cold and hot work forklift scissor lifts confined spaces looking for a career in mining

Senior Instrument Technician / Foreman "Experience: 10+years", working with one of the largest refinary in middal east.

BA-degree in Geosciences ( 4 years) graduated in 2000

Certified Public Accountant - Feb 2004, Bachelor of Business Adminstration - 1998

Computer Programmer, Database Administrator, System Analyst

My academic experience, focusing on health and the environment, and my professional experiences, have enabled me to gain good problem solving and team working skills, as well as the communication, negotiation and persuasion skills required to succeed in missions in the environmental sector.

Microbiology, environmental health and safety technologies/ studies,supervison, training, research& development, safety audits/ investigations, compliance monitoring, educationa, professional and academic training in biological/ life sciences, environmental health &safety.laboratory operations

GIS / IT professional with experience in application development and relational databas. GIS Technologist with experience in ESRI ArcGIS 9.0, and ArcIMS.

An organized, experienced, self-motivated individual, seeking an opportunity to work within an organization where quality and commitment to excellence are valued as well as to be a contributing team member where my abilities and experience can be a significant factor in achieving company goals.

My leadership ability and my training on various Heavy Equipment.

I am an Advanced Rigger of 2 years experience. I have a variety of skills including Steel erection, underground work, Franna operator and Heavy lift. I am currently employed as a Heavy lift rigger for mammoet. I am skilled in all aspects of rigging including plan/ lift study reading and dual lifts.

Petroleum Technologist, Technical Support, Electrical Engineer, Oil & Gas Analyst

A proactive and flexible candidate with strong foundations in chemical engineering, environmental management and business management looking for a position of Environmental Engineer

Manager Information Systems / Office Assistant / Data Entry Operator

Engineering Degree, analytical skills, full management skills (ISO9000:2000)

Computer Operator, Administrative Clerk, Data Entry Operator etc.

Oilfield Derrick Hand, Floorhand and Motorman, Truck Driver, Construction Foreman,Heavy Equipment Operator.

Three (3) years experienced in producing of detailed structural steel and concrete drawings (fabrication and design drawings) for onshore, offshore and Front-End Engineering Detailed-Design projects. One (1) year experienced in manufacturing plant as Technical Staff/ Production Engineer

Safety experience in many different settings (i.e. government, manufacturing, healthcare) with a BSE in occupational health and safety from an accredited university

MS in Mining Engineering (5years)+ Diploma of Specialization in Mining Sciences and Technologies (Post-graduate Research 3 years) - Freelance experience in QUARRY PLANNING and DESIGN (2 years)

Mechanical Fitter&assembling,Mechanical Site Installations,High School&Industrial Training Institute

GIS, Software Developer and Smart Card Programmer

I'm a chemist with a B.S. and a technical college Diploma in chemical technology with one year experience.

I am looking for vacancies in Kazakhstan. I am graduating from the Miami University, OH, US in December 2005 (with the Bachelor's Degree in International Studies and minor in Marketing Research); I will be able to start working right after graduation.

Recent Bachelors of Science Graduate with lots of motivation and desire to learn more!

19 years combined work experience braisened to be an Assistant

I have travelled extensively through Europe and lived in Spain, Italy and Brazil. I am fluent in oral and written Italian, Spanish, Portuguese, and English.

ASWANATH'S RESUME FOR STOREKEEPER/WAREHOUSE JOBS

GED, Physically Able, Willing to be trained

Engineering Analyst/Tech

Hard working, responsible & job dedicated

The main goal of providing this CV is to introduce myself to your company; Looking for an opportunity to prove my capabilities and continue my professional career.

NEBOSH qualified with 3 yrs of dedicated Occupational Health & Safety experience. Proven skills and experience in job safety analysis, risk assessments, workplace inspections and writing policy and procedures. Coordinated and developed safety programs and training for 550 employees.

As a mining geologist having 6 years experience in "Prospecting & Exploration" in different minerals in both Opencast & Under ground mines with the excellent knowledge of Mining Softwares like DATAMINE and MAPINFO,GIS & AUTOCAD.

Roughneck, Roustabout, Rigger, Rig Clerk, HLO and I can operate the computer: Ms. Excel, Ms. Word, Corell Draw, Photo studio 2000, etc. and I am a Hard Worker, do my job with care, and finish it with the good job. I am willing to learn and working harder to get success and career in your Company.

I am a Mechanical Engineering student (4th year, B-Tech) at the Indian Institute of Technology (IIT), New Delhi (INDIA), among one of the premier institutes of the world. I am writing to explore the possibility of an getting placement / JOB within your organization.

1 2 3 4 5 6 7 8 9 10 [ 11 ] 12

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out