Resume - Lead Electrical Outage/Project Planner, Senior Electrical Planner, Mechanical Su...

Misco Jobs

Resume #82463

CONTACT INFORMATION:
View contact information...

PERSONAL INFORMATION:
Date of Birth: February 19, 1955
Place of Birth: Benton Harbor Michigan
Citizenship: USA
Passport: Yes
Visa Status: None
Gender: Male
Marital Status: Married

EXPERIENCE SUMMARY:
Over thirty three years of diversified experience as Lead Electrical Outage/Project Planner, Senior Electrical Planner, Mechanical Supervisor, Safety & Environmental Manager, OSHA Certified Instructor, QA Supervisor, QC Field Supervisor and Lead Electrical Inspector. Maintenance Planning Software includes PIMS, Ventyx/INDUS (Passport Portal G and J), Primavera P3, Word, and MS Project.

ACCOMPLISHMENTS:
Senior Planner:
- Member of organization (Work Control) that led DC Cook Nuclear Plant in obtaining an INPO 1 rating in one fuel cycle (from an INPO 3 rating - an industry first)

Environmental & Safety Manager:
- Inherited Clean Air Act compliance issues resolved without litigation or fines
- Developed an environmental program that was recognized as a leader in Pollution Prevention efforts by the Michigan Environmental Council, Michigan Department of Environmental Quality, and the Print Industries of Michigan
- Registered (and sold) VOC Emission Reductions Credits in the Michigan Open Market Trading Program
- Charter member of the Michigan Great Printer's Project
- Developed many close working partnerships with State of Michigan MIOSHA and DEQ representatives
- Initiated and led strategies that resulted in reductions of direct medical costs by 50%, Medical
(OSHA Recordable) rates by 30% and Lost Time rates by 41%
- Developed Environmental and safety program of company with 1100 employees from non-existent to one that was recognized for its accomplishments by the State regulators and National Environmental Groups
- Developed and led Pollution Prevention initiatives that reduced VOC emissions by 60 tons annually

Procedure Writer
- Developed all initial installation and modification procedures (where none existed) for all new construction and modification activities at the DC Cook Nuclear plant for the civil, electrical, mechanical/piping, welding from "tribal knowledge", codes, site specifications etc.

LANGUAGES
English (US) – Fluent
Italian - Beginner

EMPLOYMENT HISTORY:

March 2005 to Present: SUN Technical Services, Inc.
Lead Electrical Outage/Project Planner * DC Cook Nuclear Plant
Using INDUS (Passport J), VENTYX and MS Word planned electrical, I&C and HVAC preventative maintenance, corrective maintenance and design changes. Performed field walk downs to identify and resolve job hazards, installation problems and to identify support work such as temporary power, scaffolding, etc. Interfaced with design engineering, procurement engineering and system engineers to resolve installation issues. Researched drawings, specifications, vendor manuals, maintenance history and change documents to ensure work was planned and performed per codes and plant requirements. Ordered equipment, materials and parts as needed and initiated required BOM requests, Engineering Evaluations and work permits. Wrote detailed job sequences identifying critical parameters to ensure the successful execution of the task or project. As a Lead and Senior Planner other Planner's work was reviewed for completeness, accuracy and that the task could be successfully performed as planned. Trained planners on INDUS and the DC Cook work control process.

February 2005: Babcock & Wilcox
Modification Project Electrical Planner * Quad Cities Station
Using Passport J, planned outage corrective maintenance and design change electrical work activities through field walk downs, researching one-line, elementary drawings and wiring diagrams, ordering materials and interfacing with the design group and engineering organizations as needed. Using Word wrote detailed job sequences identifying critical parameters that ensured successful execution of the task or project.

July 2004 to December 2004: SUN Technical Services, Inc.
Senior Electrical Planner * DC Cook Nuclear Plant
Using PIMS (NPM) and Word, planned electrical and HVAC preventative maintenance, corrective maintenance and design changes. Performed field walk downs to identify and resolve job hazards, installation problems and to identify needs such as temporary power, scaffolding, permits, etc. Interfaced with design engineering, procurement engineering and system engineers to resolve installation issues. Researched drawings, specifications, vendor manuals, maintenance history and change documents to ensure work was planned and performed per codes and plant requirements. Ordered equipment, materials and parts as needed. Wrote detailed job sequences identifying critical parameters to ensure the successful execution of the task or project.

May 2004 to July 2004: NESTLE USA
Safety & Environmental Head (Manager)
Managed the safety, emergency plan, training and environmental programs of a half-million square foot facility with over 450 union associates with oversight over process safety management, ergonomics, Job Safety Analysis, control of hazardous energy, confined space, storm water, air emissions, hazardous waste, contractor safety, material handling, etc.

April 10-17 2004: NIC
Electrical Quality Inspector (ANSI N45.2.6 Level II) * Browns Ferry
QC Training

March 2004: Atlantic Group
Electrical / I&C Quality Assurance Inspector (ANSI N45.2.6 Level II) * St. Lucie Unit 1
QA Surveillance and oversight on modifications and updates to instrumentation systems in the control room (fiber optic Foxboro power supplies and input/output and communication modules).

October 2003 to December 2003: * SUN Technical Services, Inc.
Safety Root Cause Analyst * DC Cook Nuclear Plant
Safety expert on a team performing a PII root cause analysis of a commercial diving accident at the Donald C. Cook Nuclear Plant in Michigan. Responsible for assessing the client's safety program, culture and risk assessment process and providing recommendations for effective corrective actions.

December 1995 to July 2003: IPC Communication Services
Safety & Environmental Manager
Responsible for the safety, environmental and security programs of six facilities in four states (Michigan, California, Tennessee, and Texas). Developed company policies and written procedures to comply with government safety and environmental regulations (MI-OSHA/OSHA, NESHAP, AHERA, DOT, CWA, CAA, CERCLA, RCRA and EPA/Michigan DEQ). Monitored employee work practices and coached employees to recognize unsafe behaviors. Developed company-wide Business Continuity and Emergency Plans and managed the company's high tech OEM customer security programs for software products.
- Authorized OSHA Certified Instructor (General Industry Safety Standards - 29CFR1910)
- Authorized OSHA Certified Instructor (Construction Safety Standards - 29CFR1926).
- Performed Job Hazard Analyses of work sites and of monitored employee safe work practices.
- Maintained MSDS program.
- Negotiated service contracts (security, hearing exams, regulated hazardous waste, used oils, etc.)
- Performed "New Source Reviews". Prepared and submitted 'Air Permits to Install' for new equipment.
- Prepared and submitted EPCRA/SARA Toxic Chemical Release Reports and Tier II Reports
- Emergency Coordinator for Business Continuity Plan, Emergency Plan, and Fire Emergency Plan

February 1995 to June 1995: NISCO/AQA, Inc.
Mechanical Supervisor * DC Cook Nuclear Plant
Supervised union sheet metal workers, ironworkers, carpenters and laborers during refueling outage. Monitored activities in the field to keep projects on track. All work was finished ahead of or on schedule and per outage milestones. Ensured work was in accordance with applicable codes, customer procedures and specifications, per approved design documents and in the safest, most cost-effective manner. Completed work walked down for completeness and as-built documentation prior to obtaining quality inspections and acceptance.

December 92 to June 1995: NISCO/AQA, Inc.
QA & Safety Supervisor * DC Cook Nuclear Plant
Audited and performed surveillance of welder qualification and weld procedure qualification tests for compliance to AWS D1.1 and ASME Boiler & Pressure Vessel codes and reviewed welder qualifications and weld procedures qualifications for acceptance per AWS D1.1 and ASME B& PV codes. Managed OSHA Safety program, establishing policies and procedures along with conducting training as needed to ensure compliance with all OSHA and MIOSHA, NESHAP, AHERA, and EPA regulations.

January 1991 to October 1992: Raytheon/UE&C-Catalytic
Procedure Writer * DC Cook Nuclear Plant
Developed and maintained the AEP Construction Department's electrical, mechanical, ISI. ASME Section XI and civil/structural procedures. Performed 10CFR50.59.e reviews and co-chaired the Design Change Compliance and Design Change Close-Out task teams.

June 1987 to January 1991: Raytheon/UE&C-Catalytic
QC Inspector: Level III Electrical, Level II: I&C, Structural, Visual Weld * DC Cook Units 1 &2
Trained, tested and certified Level I/II electrical inspectors, inspected all phases of electrical work from embedded installations to equipment pre-operational testing. Reviewed completed Job Orders for final acceptance.

April 1987 to June 1987: Basin Engineering
QC Inspector: Level II Electrical/I&C * Trojan Nuclear Plant
Performed EQ inspections on MOVs. Inspected Raychem splices, cable pulls, control room panel and MOV wiring modifications. Witnessed MOVATS testing of MOVs.

October 1986 to March 1987: Nuclear Energy Services, Inc.
QC Inspector: Level II Electrical, I&C, Mechanical/Piping, Visual Weld * Three Mile Island Unit 1
QA oversight of motor operated damper functional testing and Start Up/Pre-Op tests of the ESF ventilation system. Performed inspections on Technical Specification Surveillance Tests and I&C calibrations (bench/loop) of Foxboro multiplier, summers & signal characterizer modules, effluent radiation monitors, transmitters, transmations, level and pressure indicators, flow meters, chlorine detectors, etc. Also inspected Appendix R work & TSI thermolag installations, flamastic coatings, etc..

July 1986 to August 1986: R. A. Weirich & Associates
QC Inspector: Level II Electrical * LaSalle County Station
Performed inspections on Raychem splices and Okonite taping on MOVS, solenoids and Conax ESCAs.

December 1984 to April 86: Butler Service Group, Inc.
QC Inspector: Level II Electrical, instrumentation &Control * Clinton Power Station
Performed surveillances and inspections on the calibration (bench/loop) and maintenance of transmitters, transmations, pressure and level indicators, optical isolator cards, PCBs, flow meters, radiation monitors and associated instrument lines (impulse, pneumatic, signal and ample). Performed inspections and surveillances on the maintenance and rework of Limitorque valve operators, Hydramotors, solenoid valves, switchgear/MCCs, diesel generators, electrical penetrations and various electrical components.

November 1982 to November 1984: Butler Service Group, Inc.
QC Inspector: Level II Electrical, Instrumentation & Control * Enrico Fermi Unit 2
Inspected Hangers, conduit, tray, cable installations and terminations. Inspected control rod drives and control rod position indicating probe work. Performed Quality Engineering reviews on electrical and I&C work packages prior to issuing for work to assign witness and hold points and to identify necessary inspection procedures and checklists to verify work. Reviewed 10% of all test packages assigning witness and hold points, reviewing the remaining 90% of test packages after testing for acceptance of test results.

April 1982 to November 1982: Henry J. Kaiser Co.
Lead Electrical Inspector: Level II Electrical, Visual Weld * Zimmer Nuclear Power Plant
Working Assistant Lead Electrical Inspector performing inspections on electrical installations; anchors, hangers and raceway. Welds inspected per ASME B&PV code, ANSI B31.1, AWS D1.1 and AISC. Provided direction to three electrical inspectors in the drywell/wetwell areas of the plant.

October 1981 to March 1982: Ebasco Services, Inc.
QC Inspector: Level II Electrical, Instrument & Control * WPS 3
Performed surveillance on several subcontractor electrical installation and inspection activities, assuring compliance to their procedures, specifications, codes and standards and acceptance reviews of installation, welding and inspections procedures to AWS D1.1, ANSI and IEEE. Reviewed completed inspection records and work packages for acceptance and close out.

September 1980 to September 1981: Lord Electric Co.
Lead Electrical Inspector: Level II Electrical * WPS 3 & 5
Supervised the inspection activities of five electrical inspectors, assuring in-process installations were inspected and documented in a timely manner. Assisted the QC Manager in initiating and revising installation and inspection procedures. Also, performed indoctrination and training of inspectors.

May 1978 to July 1980: Fischbach/Lord Electric Co.
QC Field Supervisor: Level II Electrical, Visual Weld * WPS 2
Supervised twenty five electrical and weld inspectors. Coordinated with Construction Management to provide QC coverage as required to support their activities and schedules. Interfaced with the Client and Construction Management to resolve any perceived quality program deficiencies and quality concerns.

February 1978 to May 1978: Bechtel Power Corporation
QC Inspector: Level II Electrical * Palo Verde Nuclear Generating Station
Performed inspection on embedded electrical installations.

January 1976 to February 1978: L. K. Comstock & Company, Inc.
QC Inspector: Level II Electrical, Visual Weld * Fermi Unit 2 & DC Cook Nuclear Plant
Performed inspections of welds per AWS D1.1 and on conduit and tray installations. Witnessed cable pulls and inspected cable terminations and splices. Worked with the Westinghouse representative verifying the installation of the full and part length coilstacks into the reactor head (DC Cook Unit 2).

EDUCATION:
1973 Graduate St. Joseph High School, St. Joseph, Michigan 49805
1981 Transformers and AC circuits – Ebasco Services, Inc.
1981 Welding Principles – Ebasco Services, Inc.
1986 MOVATS Signature Analysis Systems – MOVATS Inc.
1986 Thermal Lag Coatings – TSI, Inc.
1991 Leadership & Team building – AEP Electric Power Company
1993 Asbestos Abatement Contractor Supervisor – WMI Educational Services
1994 HUD Guidelines on Metallic Lead Abatement – WMI Educational Services
1994 Asbestos Abatement Supervisor Re-qualification – WMI Educational Services
1994 OSHA Certified Instructor Construction Industry Standards – Dept. of Labor OSHA Training Institute
1996 Air Permit to Install workshop - Michigan DEQ
1996 Hazard Waste Management - Environmental Resources
1999 OSHA Certified Instructor General Industry Standards – Eastern Michigan University
2001 Process Improvement – Southwestern Michigan College
2002 Ergonomics - University of Michigan
2002 Critical Materials & Wastewater Discharge Reports - Michigan DEQ
2003 ISO14001, Michigan DEQ and Honda Manufacturing
2004 OSHA 30 Hour Course "General Industry" – Nestle University
2005 Industrial Suite (Passport J) Training – DC Cook
2005 OSHA 10 Hour Course "Construction" – DC Cook
2006 Industrial Suite (Passport J) Training – DC Cook

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 51 to 100 of 704)

Go to Search Parameters...

Brief Description

Consultancy, Teaching, Research, Planning & Design exprtise and experience in Hydrology, Water Resources Engineering, Civil Engineering Systems & GIS inc. as Founder Director, National Institute of Hydrology, Roorkee, India and (Retd) Professor of Civil Engg, IIT, Kanpur

James is a biologist in marine and coastal ecosystems and associated marine issues, as well as geographical information systems (GIS).

I have done my Masters degree and P.hd in Geology, I have been working in the field of Watershed Hydrology and have an experience of hilly watersheds in Himalayas of North India and forested watershed of South India.

organized, efficient, self-motivated, hard working, cooperative, respectful of others

Ph.D., Zoology (Commanded) Bharathidasan University, Tiruchirappalli, Tamilnadu, India, Thesis title-Oil effluent toxicity and detoxification responses in the freshwater mussel, Lamellidens marginalis

An entry level position where my environmental, health and safety skills and work experience can be utilized to assist a company to further their environmental health and safety program and objectives

I'm trying to continue my environmental career with a reputable employer. I look forward to working with you shortly.

I am a dual citizen of Canada and the UK, and wish to build on and expand my knowledge in the environmental consulting and geochemical industry. Hands-on experience in projects with diverse and interesting challenges will provide me with an enhanced understanding and knowledge of this industry.

Over two years of experience in the Digital Printing and Reprographics industry.

ISP, NOC, NETWORKING, VSAT, BROADBAND, SATCOM, CCNA, MCP, MCSA, VOIP

A recent MSc graduate looking for employment within a UK based environmental consultancy. Very adaptable and suitable for many types of work, from basic administrative tasks through to environmental management issues.

Environmental Scientist/Geologist seeking entry level employment within the United States

Conducting baseline Survey, Conducting technical and Enviro legal study,Modeling of Air impacts using ISCST 3 and CALINE 4 for evaluating the proposed change in concentration of various pollutants, ,Conducting Public hearing Preparation of EMP (Environment Management Plan), M.Sc environemnt science,

EDU: MSc Environmental Geochemistry, University of Cape Town (Dec02); BSE Civil & Environmental Engineering, Princeton University (Jun00). WORK: Assistant Lecturer, University of Cape Town (01-02); Intern, SSPA Environmental Consultants (09/00-12/00) OTHER: Computing, many aspects including GIS

I am the Environmental Health Specialist for the Gulf Cooperation Council Center for Infection Control, I have ISO 14001:2004 Certified Lead Auditor Certificate EMS

B.E.S (Equivalent to Master) Environmental Sciences

Bsc Environmental Health, certificate in advanced project management,2years experience in the field of environment, computer literate

BSc (chemistry-physics-math)

Bachelor of Economic

To seek a position in an organization, which values & benefits from my technical and analytical skills. My areas of interest in map making are Digital Cartography, Remote Sensing & GIS application.

Manager - Service Assurance and Process Designer

Lead Electrical Outage/Project Planner, Senior Electrical Planner, Mechanical Supervisor, Safety & Environmental Manager, OSHA Certified Instructor

Background in Geology, highly motivated, great work ethic, has great desire to learn.

geology, hydrology, hydrogeology, hydrochemistry, water resources and environment studies

Reliable, hard working Geologist with experience in Environmental Consulting and Geophysical Investigations .

Sales Management Executive providing leadership in hiring, directing, and motivating a sales force consisting of direct / indirect channels in the pursuit of increasing revenue, profitability, and market share.

Experienced HR/Training/Organizational Development Professional

Environmental Scientist/Project Manager with more than six years experience managing projects totalling nearly $2M in value. Consistently of exceeding expectations. Superior writing/oral communication skills and interpersonal/analytical abilities. Willing to relocate and/or travel nationally/abroad.

Processes Control lab to bulk,Water analysis,Textile auxiliary testing

I am self motivated person who is diligent, ambitious, adaptable, willing to learn and to take on new challenges.

Mater and Doctoral degree holder in environmental science, Have 3 1/2 years of teaching experience. Worked in various environmental projects, authored a manual titled "A laboratory manual for water and wastewater analysis. Specialized in air and water pollution, EIA, Toxicology, EMS, Energy.

Qualification: Higher National Diploma in Microbiology Skills: Grammar fluency, initiative, receptiveness, physical and mental alertness,good team player,good communication and interpersonal skills

position as an MEP Design management, Sustainable Design, LEED Facilitation, Building Commissioning, and Building Energy Modeling for High Performance Buildings.

I am currently exploring possible options for employment as a geologist, hydrogeologist or environmental scientist. I am looking to broaden and enhance my skills, to include work in or soil & groundwater assessment and subsurface investigation and watershed analysis and development.

Experience in stream assessment, macrobenthic ID, wetland delineation, Section 401/404 permitting, NEPA and SEPA, protected species. formal training in wetland delineation, extensive field experience, in Texas, North and South Carolina, Virginia, and Venezuela.

I am working in RALLIS INDIA LIMITED for 10 years in SAP SD ERP .

Qualification: B. Sc. Hons Biotechnology

Doctorate in Science, Ecotoxicology, marine pollution, Enzymes, Biomarker, biomonitoring of pollution,

Natural resource managment student , skils range and land surveying , to environmental impact assessments to water quality testing. Also a qualified sailing instructor and first aider with a clean driving licence and eight years endorcment free

Strengths in project management, problem solving, team leadership, instrumental analysis, laboratory techniques, analysis data, research proposals, design interactive website, poster, oral presentation, Stella computer modelling, Outlook, MS Office Suite, Adobe Photoshop, and Fusion.

Recent college graduate with experience in environmental education, natural resource conservation, advocacy and consulting work.

Bachelor of Biotechnology Industry (2nd class upper-3.44)and have skill in molecular work(PCR,RT-PCR,Squencing,Bioinformatics software&tools).

A highly experienced professional with expertise in providing computer mapping using ESRI's products. Demonstrated ability in the data collection and data conversion of digital maps. Detail-oriented and results driven to achieve the overall goals of the company.

Seeking entry level environmental position.

Infor FMS SunSystems, including Vision XL, Vision Executive, Agresso, SQL, UNIX,

Graduated MSc cum laude in earth sciences. Project Manager with 51/2 years work experience with a multinational natural resource group and a leading consultancy with an eminent client list. Consultant in coordinating and writing environmental impact assessments (EIAs) and in environmental management

Skilled in Environmental Impact Assessment

Doctor of Engineering, Department of Civil Engineering, Kyoto University, Japan.

im a computer programmer since 1990

I am a geoscientist with a strong technical background with seismic processing, interpretation and analysis experience. Also experienced in shallow geophysics, field sampling, and monitor well installation for environmental projects.

1 [ 2 ] 3 4 5 6 7 8 9 10 11 12 13 14 15

Seach Parameters


Change search parameters...
CATEGORIES: Other; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out