Resume - INSTRUMENTATION ENGINEER

Misco Jobs

Resume #88434

CONTACT INFORMATION:
View contact information...

OBJECTIVE
To work in a dynamic and challenging job environment where I will be able to significantly contribute to the organization's requirements while continuously enhancing my skill-set.

EDUCATION

Graduation
* B.Tech in Applied Electronics & Instrumentation from LBS Institute of Science and Technology, University of Kerala with first Class (66.6%) in 2008
Higher Secondary
* Completed Higher Secondary in 2004, Board of Public Examinations,
Government of Kerala (71.3 %) with first class from Govt. Cotton Hills G.H.S.S
Schooling
* Completed SSLC in 2002, Board of Public Examinations,
Government of Kerala. (89%) with distinction from Govt. Cotton Hills G.H.S.S

Software Proficiency:
C++, C#.net, AutoCAD 2007

Experience:

Presently working as Instrumentation Engineer in a petrochemical consultancy
(Petrocil Engineers and Consultancy), Sasthamangalam, Trivandrum, Kerala.
(From 01/10/2008 -presently).

E-mail id - supriya.sr@petrocil.com

Responsibilities of job:
Preparation of the following Instrumentation drawings/documents:
* Technical Instrument Datasheets.
* Instrument Index/Schedules.
* Cable Sizing Calculations.
* Equipment layouts.
* Instrument Cable routing/tray layouts.
* Instrument Cable schedule.
* Block diagrams of Instruments.
* Instrument Hookup drawings.
* Instrument Loop and Logic diagrams.
* Wiring/schematic, Interconnection diagram, termination details.

Academic Mini project
Linear Angular Frequency Meter (LAFM):

Linear angular frequency meter is a device which accurately determines the frequency of input signal. With the help of selection mode it can distinguishes between linear and angular input. We just press the start button for frequency display. The device computes the number of pulses in 1 second, which it is implemented using microcontroller AT89C51. It is a low power, high performance CMOS 8-bit microcontroller with 4k bytes of Flash Programmable and erasable read only memory. In this product micro controller is used as a counter. i.e. to count the number of pulses at the output either optocoupler module or squaring circuit. Optocoupler is used for the measurement of angular frequency. It consist of LED and phototransistor in a module, we get the pluses as output.
The device can be effectively used in areas which require accurate frequency determination.

Academic Main project
Design of RS485 Tran receiver Protocol Controller:

To obtain a design of RS 485 Transreceiver protocol controller using VHDL. RS 485 is the communication standard defined by EIA. The RS 485 standard permits a balanced transmission line to be shared in multi drop mode. Maximum of 32 driver/receiver pairs can share a multidrop network.EIA-485 is an OSI model physical layer electrical specification of a two wire, half duplex multi point connection.
In our project there are mainly three major blocks: Transmitter, receiver and a baud rate generator. The baud rate generator is the crucial block that provides the proper clock for the transmitter and receiver for proper synchronization and working, for proper functioning, the synchronization between the transmitter and receiver is necessary. The function of baudrate generator is to generate local clock signal.
We have undertaken here to obtain a simple model of RS 485 Trasreceiver protocol controller using VHDL; it stands for VHSIC (Very High Speed Integrated Circuit) hardware description language. Coded and simulated the model. Coding involved converting the basic operation into VHDL code. Simulation involves the generation of various waveforms associated with the code.

PERSONAL INFORMATION
Sex: Female
Marital Status: Single
Nationality: Indian
Hobbies: Enjoying music, Net surfing
Date of Birth: 05/05/1987

Activities and Achievements:

„« Contributed articles for college and school magazines,
„« Active participant in College sports meet.
„« Won prize in short story writing in Youth Festival
„« Student representative in 10th &12th
„« Active member in nature club and NSS

Reference
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 708)

Go to Search Parameters...

Brief Description

Geologist

Construction supervisor (industrial civil works , Algerian HND) (48 GAS wellheads linked to 2 GAS Production trains to 4 GAS marine offloading systems

Rigger crane op scaf

My experienced includes hydrocarbon analysis, pore pressure detection, lithology identification, and subsurface evaluation. Drilling experience on directional, sidetrack, vertical, and geosteering wells, with various drilling fluids, throughout the US and Gulf of Mexico.

Maintenance Manager/Supervisor - Direct hands-on experience in the start-up of a large hydroforming/manufacturing facility. Excel at directing a cohesive staff in the successful attainment of objectives. Major strengths in planning, problem solving and communication.

DBA database administrator oracle, system analyst, programmer

I have a varied skill sets and expertise which puts me in a unique position to contribute enormously to a wide range of duties and activities- Ranging from Mechanical Engineering (projects and operations), to Project Management and Process Improvement

Process/Electronic Technician

My experience in biological science ranges from working independently to working for, State, Federal Agencies and Environmental Companies. This experience has provided me with valuable skills in conducting field research, data collection and analysis on many threatened and endangered species.

Fire Fighter I & II (Accredited at SAESI), BAC (Registered at HPCSA)

Accounts Professional having 5.8 years of an experience.

Administration, Marketing, Business Development, Operations & Computers

Oil & Gas Land Title, Leasing, Right of Way, Consulting & Reporting

Motivated scientist looking to bring new and fresh ideas to current environmental projects.

Production Manager with BS in Mechanical Engineering and 8 years of experience in CNC Machine Shops, QC, QHSE, Planning, Inventory Control, Cost Control, Budgeting, ERP (Great Plains), Pro / E, AutoCAD. Good experience in factories start ups. CPIM (Certified in Production and Inventory Management).

Responding to all types of emergencies such as structural, aircraft and shipboard fires, activation of installed fire protection and alarm system, hazardous material operation, and rescue and retrieval operations during times of calamities.

I have completed CA - Inter and currently a Chartered Accountant - Finalist from Institute of Chartered Accountants of Pakistan. I am working with Ernst & Young Global Limited in Karachi office for the last 4 years and currently my designation is Senior Auditor.

To be part of a strong team of intellectuals saddled with challenging tasks, targets and responsibilities requiring a high degree of dedication in a conducive and friendly environment that upholds the tenet of customer satisfaction without jeopardizing profit and standards.

Senior project planner schedule with 12 years heavy industry and construction projects experience ,professional in using MS Project,Primavera P3&P5,MS office,CMMS systema like SAP R/3 , Maximo. Strong technical background , project management and cost control, contract and claim adminstration

INSTRUMENTATION ENGINEER

I am an M.Tech in Energy Technology and M.Sc in Chemistry. Have Experience Non Conventional Energy Field. Well aware of Electrochemical Power Sources like Fuel Cell, Battery etc. Basic computer skills including language C, C++, Matlab etc.

B2B Marketing, Product Development, Dealer Management, Market Research

Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre-commissioning Engineer, Commissioning Engineer, Start-up Engineer, Process Engineer, Chemical Engineer

Involved in all construction activities including fabrication , installation and control off all structural items.Steel structural estimates include, pipe-racks, elevated pipe supports, pump shelters, access platforms, handrails, et

I am a current registered EMT Paramedic Assessor and First Aid Instructor. I am now working in a local company as a Safety cum Fire Safety Manager. My responsibilities include coordinate and conduct training, investigate and writing incident report, ensure safety at workplace comply.

Dynamic Health & Safety Coordinator Looking For Work In Mining, Heavy Construction Or Oil Industry

Occupational Health Safety & Environmental Practitioner, Post Gruate Cert. in OHS&E Management

Workplace Safety Health Environment Coordinator - Moreton Island Oil Spill Clean Up Project

Finance, Investment Banking, Management consulting

I have my fisrt degree in ghana in one of the best universities in the country as well and am currently working with one of the biggest mining company in the country too.

Commissioning, servicing, maintenance, diesel gensets, engine-alternator alignments, overhauling diesel engines.

an economics graduate from olabisi onabanjo university. i also belong to a professional memeber of the institute of chartered accountant of nigeria.

Higher Diploma In Business And IT, UBS Computerised System, Basic Knowledge Of Computers And Web Publishing

Service and maintenance of various heavy equipment

HSE ENGINEER AND SUPERVISOR

Oracle, LPN, 3PL, Supply Chain, Imports, Logistics

Twenty-two years in leadership and management with ten years experience in the Petrochem/Paper Mill industry. Ten years in health and safety in the fields of general construction, maintenance, Turn Around/Shutdown. Able to identify at risk behaviors, trends, and policy infractions through observati

Maintenance Technician

Experienced CAD-GIS Professional/Consultant with years of experience in Autodesk design softwares such as AutoCAD, Civil 3D, Map 3D, MapGuide Enterprise and Raster Design.

To obtain a challenging, high demand QA/QC, Power Generation Tech, Electrical or Mechanical position utilizing my skills and experience in all fields.

Catia V5, Unigraphics, Pro-Engineer, Solid Edge

I have the qualifications and experience you are seeking. I am certified as a Journeyman Refrigeration Mechanic, Journeyman Electrician, and Controls Technician. My experience includes over 17 years in construction and service of mechanical systems.

Good Mam/ Sir My name is Denver Moodley. I am a qualified Advanced Life Support Paramedic working in Africa for International SOS remote site projects. I am keen to explore the option of Contract work with better opportunities and would be grateful if you consider my placement in one of your remot

Training Coordinator

Comupter And Office applications, Microsoft word proficiency,Good analytical skills

Oil and Gas Leasing, Mineral Title research for the purpose of Leasing, Building Drilling Title Runsheets for Title Attorneys and Title Opinions, Title data entry, Deed plotting, Right of Way Title, Right of Way Acquisition

Rangeland Ecology and Management Degree

CSWIP 3.1 Welding Inspector, MIGAS Welding Inspector, Familiar with Software (Auto Cad, PDMS, Pro-Eng), Familiar with Microsoft Office (Word, Excel, Power Point, Visio)

Security, life support, camp management, logistics

• B.Sc (Hons) Geology • Diploma in Computer Studies and Programming, 1999

1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15

Seach Parameters


Change search parameters...
CATEGORIES: Other; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out