Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #1082 next resume »»
CONTACT INFORMATION:
View contact information...

RESUME

EDUCATION
BS, Mathematics, Moscow State University, Moscow,
Russia, 1986
MS, Mechanics, Moscow State University, Moscow,
Russia, 1988
Ph D, Fluid Dynamics, Moscow State University, Moscow,
Russia, 1993

PROFESSIONAL TRAINING
Paul C Rizzo Associates, Inc. Corp. Seminar –
Remediation of Dams, Pittsburgh, PA, 2000
NGWA Seminar – Risk Assessment, Natural Attenuation,
and RBCA, San Francisco, CA, 2001

EMPLOYMENT HISTORY
BJAAM Environmental, Inc. (www.bjaam.com) Canal
Fulton, OH (September 2001 – April 2002)

As a Computer Modeler, I provided analytical and
numerical modeling of groundwater flow and contaminant
transport. I was responsible for development
/application of quantitative analysis
techniques and software tools to solve environmental
problems.

The responsibilities included compilation and
interpretation of chemical and hydro geologic field
data, development, calibration, sensitivity analyses
and use of groundwater flow and contaminant transport
models, preparation of technical memos and reports for
Phase II and III Environmental Site Assessments.

The numerical modeling included development of
three-dimensional model (MODFLOW/MT3D/RT3D ) of
groundwater flow and transport of dissolved petroleum
hydrocarbons, which utilized solution of system of
differential equations with partial derivatives. The
transport model was associated with multi-components
chemical reactions between hydrocarbons and dissolved
electron acceptors, advection, sorption, and
dispersion processes. I provided calibration,
sensitivity analysis, and application of the model to
actual condition at the sites. The analysis and the
application were based on statistical evaluation of
results of the calculations and measured geochemical
data.

Paul C Rizzo Associates, Inc. (www.rizzoassoc.com)
Monroeville, PA (October 1999 – September 2001)

As an Engineer, I assisted in the design and
implementation of remediation systems for remediation
of dams in a variety of industrial and commercial
settings. I performed numerical modeling of
groundwater flow for designed dams, existing dams, and
dewatering systems of excavation.

The numerical modeling was based on steady and
transient simulation of the flow in three-dimensional
domain. The numerical models utilized
finite-difference (MODFLOW)and finite-element (SEEP2D)
analysis of the system of differential equations.

I was also responsible for numerical evaluation of the
results of aquifer testing, analysis of mechanical
stability of slopes of excavation zones and dams, and
the stability of designed retaining walls.

Brest State University, (www.brsu.brest.by) Brest,
Belarus (May 1993 – September 1999)

As an Associate Professor, I provided following
courses in Department of Physics: Calculus, Advanced
Calculus, Theory of Differential Equations, Numerical
Methods, General Mechanics, Analytical Mechanics,
Fluid Dynamics, and Thermodynamics.

I also conducted a research in area of computational
analysis of fluid flow in porous media. I wrote
computer codes for solution of system of partial
differential equations based on finite difference
methods. The numerical models were associated with
Navier-Stokes equations for transient flow of
compressible non-viscous fluid with shock waves. The
results were presented on international conferences,
and in scientific publications.

Institute of Mechanics of Moscow State University
(www.msu.ru), Moscow, Russia (November 1988 – April
1993)

I was a Research Assistant in Laboratory of Shock
Waves and Blasts (Head of laboratory: Professor
Vladimir Levin). I investigated propagation of waves
in porous media and conducted experimental
measurements of velocity, pressure, and laser beam
attenuation in high velocity multiphase flow. I also
conducted visualization of the flw and statistical
analysis of experimental data.

SKILLS
Proficient in GMS, Groundwater Vistas, Visual Modflow,
MODFLOW, MT3D, RT3D, MODPATH,
BIOSCREEN, SEEP2D, SEEP\W, SLOPE\W, AQTESOLV, and
SURFER

Familiar with AutoCAD, MathCAD, and UTEXAS

Experienced in program development for
numerical analysis using C/C++, Fortran, Visual Basic for Excel


MAIN PUBLICATIONS
1. Interaction of rarefaction waves with wet foam.
Fluid Dynamics, Vol. 30, No. 2, 1995, pp. 219-223.

2. A study of shock wave-aqueous foam interactions.
20th
Intern. Symp. on Shock Waves. Abstracts,
Pasadena, CA 91125 USA, July 23rd to 28th, 1995.

3. Features of gasdynamic disturbance propagation in
the media with foamy structure. Journal of technical
physics. 1995, v.65, N7, pp. 19-28


References available upon request.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 151 to 200 of 2395)Go to Search Parameters...
Brief Description
*Knowledgeable of a broad base of local, States and Federal regulations: including DOT, OSHA, States R-T-K, VOCs, HAPs, TSCA, EPCRA, CERCLA, SARA, confined spaces, hazardous/non-hazardous wastes including waste reduction, worldwide inventory status, etc.
Excellent knowledge of environmental, health, and safety (EHS) regulations. HazMat Certified. First-rate skills in presentations, leadership, and problem solving. Diplomatic with good communication and interpersonal skills. Excellent knowledge in computer applications. Bilingual English - Spanish.
Qualified QEP with proven expertise and success in the planning and implementation of environmental and waste management programs. Proven success in program planning and delivery in China and Southeast Asia
Metallurgical/Environmental/Maintenance/Process/Project engineer with 30 years experience in hydrometallurgical, mineral processing, process, project, maintenance, environmental, lab, computers and budgeting.
Industrial By-Product environmental compliance and management, that focuses on utilization wherever practical to reduce costs while maintaining environmental safety. Primary experience is with coal combustion by-products.
Master degree in Environmental Health, More than 15 years working in environmental Health field.
I AM A MASTER STUDENT IN WATER ENGINEERING FIELD. I HAVE ABOUT 8 YEARS EXPERIENCE IN WASTEWATER INDUSTRIES. I CAN WORK INDEPENDENTLY AND GROUP WORKING.
Five years experience on various aspect of remote sensing and GIS techniques in groundwater exploration, land use mapping , 3D analysis etc from satellite data,
I have completed a graduation degree in electrical engineer and doing Master degree in electrical by availing study leave from the railway , because i am pemanent employee of India rail working at the post of section engineer (power supply ) and train lighting
I have over ten years of experience related to construction, operation and management of hazardous and solid waste management facilities, environmental site assessment, environmental impact assessment, technology evaluation. Currently I’m completing a master degree of Environmental Engineering
I am a Senior Environmental Project Manager (> 12 years experience) specializing in Environmental Remediation and Construction Management. My areas of expertise include project management, construction management, scheduling, document control, cost control, quality assurance, and quality control.
I did Master's Degree in Exploration Geophysics and Sixteem years experience in the field of groundwater exploration.
I am a Graduate of ENvironmental Engineering with PG Diploma in Industiral Pollution Control and MBA . I am having 16 years of experience in Environmental Engineering field in petroleum sector. I am EMS Lead Auditor too.
I have ample experience in foundation investigation of dam sites, road allignment, building sites and slope stability assessment studies.
I am graduate Mechanical Engineer having 12 years of experience in the field of Machine Maintenance, Reconditioning, Project Management & Plant Engineering in Manufacturing Industry.
To manage and provide direction and regulatory expertise to efficiently develop, implement, audit and maintain procedures and programs in compliance with regulations and company policies.
12 years total in the telecommunications field. Currently working in a NOC testing, troubleshooting, building and initiating DS1, DDS, frame relay, IP, SS7 and voice circuits.
I am a Hydrogeologist/Aqueous Geochemist. I hope to utilize my problem-solving skills, analytical abilities, and knowledge gained through working experience in providing innovative solutions to the company’s operations. I hold a PhD from New Mexico Tech in the area of Environmental Geochemistry and
Design and Fabrication/drafting Plans/various design of industrial equipment
I have extensive experience in treating large animals and birds
I am a post graduate in Chemistry as well as Ecology and Environment. I have worked with Petrochemical industries for the past 18 years. Presently I am working with Veba oil Operation, Libya for the last 2 years as water treatment specialist. I am well experienced in DCS operated production also.
Safety engineer
Expertise in hydrological analysis and design, river engineering studies, analysis of sediment transport and river morphology, river modelling with MIKE 11 and MIKE 21C, water management with people’s participation. Excellent managerial and communicative capabilities as well.
PE with 13 yrs exp in petroleum ind, gov research, eng consultancy, proj manager for RCRA/CERCLA programs for the U.S. Air Force. Past 6yrs managed the tech proj planning, budgeting, cost estimating, contract proc/admin, and contractor oversight for the execution of eng invest, const and O&M projs.
Doctorate degree in the field of Environmental Science with five years experience in research and development and five years experience in teaching, education, administration and academics.
I have 40 Years experience in environmental construction field, I have worked from the estimate to close out of projects. I have been responsible for Safety, scheduling ,budget, management of each project.
Process Supervisor
Technical sales, Technical support, presentation, negotiations,
Environment Specialist at an environmental consulting firm engaged in the conduct of EIAs, Feasibility Studies and Environmental Due Diligence and various environmental consulting services
Environmental hydrogeologist with great expierence in assesment and remediation of ground water contamination
Mechanical Design, CAD-Pro/E, Unigraphics, Ideas
A highly talented Environmental Engineer with 10 years of involvement in identifying sources of environmental pollution, preparing reports, recommending corrective measures to Control and Remediation of Environmental Health Hazards.
Marine Engineer---Second Engineer
Qualified and experienced mold cum product design executive with extensive experience gained from consumer electronics and automotive industries molding requirements. Experienced in meeting strict deadlines through personal commitment
AutoCAD-2000/004 (X-ref, Xref-Manager, Model Space, Paper space, 3D Modeling, Animation, Working in layers) drawing.
Basically Hydrogeologist, working on land and water resources development and management from last one decay. I am Doctorate in Geology and Post graduation in Applied geology, working in RRL (CSIR), Bhopal India which is Min. of science & Tech., Govt. of India.
Having eight years experience in food analysis, HACCP implementation, operational, quality assurance.
A results-oriented senior level professional with 30 years of demonstrated success in analyzing, evaluating, training and implementing improvements to enhance efficiency and performance of the team. Skilled at utilizing teamwork across all disciplines of the company to achieve increased productivit
Engineer with 10 years of experience is looking for a job as infrastructure and/or environment engineer on planning, design, supervision or construction of international projects that are a challenge due to tight schedule and big pressure. Any where in the world.
I have post graduate degree in Environmental sciences from Canada. I also have a Masters degree from Hungary in trasportation engineering (Civil). I worked in Europe, Asia, Africa and Canada as well. I speak four languages (English, French, Hungarian and Bengali). I have 12 + yrs. of experience.
Experience 15 years in • Project Management – 4 yrs • Engineering consultancy – Water & Wastewater treatment, Air pollution control equipment & Environmental Audits. – 4 yrs • Sales & Marketing – 4 yrs • Corporate planning – 3 yrs
Environmental professional relishing challenges Multilingual communication skills. Knowledge of international environmental regulations Good organization, teamwork, and leadership skills. Organized and effective time manager.
Senior Project Manager
NZQA-National Cert in Commercial Road Transport, HC License, Forklift Endorsement, Heavy Wheels, Heavy Rollers, Heavy Track Endorsement (NZ), 3yrs Secondary School Education, 20yrs in the Transport Industry, customer service.
Electro Machanical Technician ,packaging PLC.1 /2/3
I am looking for Hydrogeologist/Computer Modeler Position I have PhD in Fluid Dynamics, solid background in Numerical Methods, and broad experience in computer modeling in area of Civil and Environmental Engineering
Manager of proposals and technical support to marketing experience 5 years. Experience in Latin America and Middle East. Project manager experience 15 years: wastewater treatment plants, power plants, solid waste facilities. Excellent technical writing, computer literacy
Job Title : Software Enginer Education : Ordinary Degree in Bachelor of Science Previous Employer: Motorola Australia Software Centre
Having 15 years of experience in the field of Geology
Mechanical engineer having 10 years of exp in waste water and lube oil refinery.
1   2   3   [ 4 ]   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48  
Seach Parameters

Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com