Resume - Talented and value driven professional with 9+ years of experience in health, sa...

Misco Jobs

Resume #16517

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS SUMMARY
Talented and value driven professional with 9+ years of experience in health, safety, environmental and quality management. Motivated by challenge and rewarded through key initiatives that aid continuous improvement, as well as profitability and productivity. An influential leader with intrinsic talent for conceptualizing and communicating vision. Developing and empowering management and employee groups, fostering cohesion for achieving common goals. Equally adept in capitalizing on interpersonal skills to create a unique blend of innovative solutions and productive conflict resolution, while thriving on opportunities to drive people, processes and technology.

AREAS OF EXPERTISE:

Hazard Analysis Risk Assessment HSE Evaluation HSE Regulatory Standard
OHSAS 18001 ISO 14001 Emergency Response Legal Compliance Audit
HSE MS / EMS HSE Engineering Root Course Analysis HSE Training
ISO 9001 HSE Audit HSE Improvement HSE Drilling Management

Mission Statement for - 4 Main Focus Areas to Enhance the HSE Performance
Provides Health, Safety and Environmental (HSE) leadership for three facilities. Implements and maintains overall programs for associate safety, environmental protection and governmental compliance to maximize the associate productivity and minimize dangers to associate health and safety to achieve customer service; and growth and profitability objectives of the organization.

Handle and lead HSE program activities to prevent accidents and pollution, eliminate safety hazards, minimize waste and assure effective communication of programs, policies and procedures for all related employee.
Facilitate and develop safety, industrial hygiene, and environmental processes in conjunction with production leadership and organization staff to positively impact the organization's performance; will encourage safe utilization of equipment and facilities.
Will utilize participative management and continuous improvement methods to improve safety and environmental performance. Will assure company regulatory compliance with all federal, state and local requirements; will deliver monthly reports to divisional and corporate management and assure all other required OSHA reporting is accomplished. Will supervise a HSE technician with responsibility for waste management, workers' compensation programs and related safety programs.

EDUCATION
* 2nd Years PhD in OSH Management ; The University of Science Malaysia (Organization Development) – December 2002 – TBD
* MASTER OF INDUSTRIAL SAFETY MANAGEMENT ; The University of Kebangsaan, Malaysia - 2002
* BECHOLAR DEGREE OF CHEMICAL ENGINEERING ; The University of Technology Malaysia (Gas Engineering - Major) – 1996
* Certified Safety Officer by NIOSH – SHO Certificate of NIOSH Examination 2002
* SPM & SRP ; Royal Military Collage - 1986-1990

EXPERIENCE
HSE Manager, Murphy Oil Co Ltd (MOCL), March 2004 – Present

KEY ACHIEVEMENT:
1. 4 Million LTI Free since March 2003 – Activites involve: Building 3 Production, Platform Installation, Vassel Activies, Aviation, Construction and Drilling
2. Achieve 5 Millioun Barrel with ZERO RTC & Recordable Cases
3. Significantly Reduction on FA & RTC Case by 50% since April 2004
4. Successfully Install 2 Platform (Production & Water Injection Platform) with ZERO LTI ~ 500K Man-hours
5. Publish HSE Monthly Bulletin – MURPHY HSE NEWS since June 2004
6. Assist Platform Construction with ISO14001 & OSHAS 18K Certification – HL Engineering at Lumut (April - November 2004)
7. Fully Implemented Health Safety Environment (HSE) Management System HSEMS on July 2004
8. Improving waste management program in all 3 drilling rig at Murphy Oil by 45% reduction in waste generation and waste segregation
9. Completed HSE Legal Regulation and Relevant Legislation Audit at all Facilities with comprehensive Action Plan assigned to monitor the compliance
Key Function
* To provide effective specialist HSE advice and assistance to line management and supervision.
* To provide a monitoring and audit function which ensures the effective implementation of MOCL HSE standards and procedures.
* To direct and coordinate the implementation of the Murphy Oil Co Ltd (MOCL), HSE Management Systems in accordance with Company Policy and the Business Plan.
* Strengthen the Relationship with Local Authorities (DOSH, DOE, AELB, Marine Dept, etc)
* Enhance the HSE Participation among all MOCL Contractors (Drilling, Vessel, Construction, etc)

OTHER ACHIEVEMENT
* Guest Speaker – International HSE Risk Management in Oil & Gas Conference - February 15 - 18, 2005 * The Hilton Hotel, Kuala Lumpur, Malaysia
* Guest Speaker - Drilling Fluids, Cuttings Management & Environmental Excellence 2005 - Introducing Oil & Gas IQ's 2nd annual drilling fluids conference in Asia
February 22 - 23, 2005 * Sheraton Imperial, Kuala Lumpur, Malaysia
* Presenter – Effective HSE and Excellent for small & marginal field in Oil & Gas Company. HSE Day Petronas Carigali, EverlyPark City Miri, December 2004
* Presenter – HSE Management System (Management Participation toward achieving excellent in HSE) – National NIOSH Conference, Sunway Hotel June 2004
HSSE Asst Manager, PEREMBA CONSTRUCTION Sdn Bhd, Jan 2003 – March 2004
Key Achievement:
1. 5 Million LTI Free for Putrajaya Persint 11 Development
2. First Malaysian Construction Company to be Certified for ISO 14001
3. Best HSE Performance Contractor by Petronas
Key Function
* Assist HSSE Manager for KLCC Private Hospital project value at RM 380 million. Ensuring all relevant permit and approval for relevant authorities. Ensuring all clients, local and other requirement are meet and comply.
* Comprehensive new HSSE approached by using little new method of science and engineering – focusing on changing of behavior & continuous education for all level.
* Emergency Response Plan (ERP) Fire Safety System Requirement –Including fire protection system, Fire drill and fire fighter in-house organization.
* HSE Department reorganization and introduce new HSE System to meet next level of excellent. Establish system to support the management goals to be industrial leader in HSE.
* ISO 14001 Auditors Team for 3 Construction Site – Putrajaya Precinct 11, Sungai Kelang Flood Mitigation Project & Shah Alam Project.
* Management Integration Team Chairman on OSH Management System to achieve OSHSAS 18001 by year 2003 end. Company is in the process of developing detail plan to establish world-class program & documentation to meat International standard.
* Establish 5 years HSE long-range plan for organization including re-organization, documentation control process, and site management and staff development.

SR. HSE ENGINERR, INTEL TECHNOLOGY (M) Sdn Bhd, Jan 2001- Dec 2002
Key Achievement:
1. LTI Yearly Reduction Rate decrees by 25% Yearly. End of Dec 2002, Intel Malaysia achieve 0.18 and been considered as World Benchmark for HSE Performance
2. Prime Minister National Award in Occupational Safety and Health – 1996 & 2001
3. Hibiscus Award – Notable Award – 2001
4. ISO 14000 – Environmental Quality Award
5. Successfully Attended 5-month work Assignment at Arizona, US for New Pentium Product Transfer as HSE representative represent Malaysia. Lead the Asia Pacific Factory to Implement Incident & Injury Free factory implementation

KEY FUNCTION
* Responsible for HSE during New Building Construction (Total 400K sf including Manufacturing floor, support area and office).
* implement 3 new HSE programs for both Malaysia and Asia Pacific (APAC). Conducted ~ 100 Session of both 3 classes and trained ~ 1600 Employee & Contractor for New Pentium 3 Startup.
* Implement the HSE Equipment Safety Program (ESO) in Malaysia & APAC Intel Factory Site with the success on signing > 450 Equipment using New ESO. ESO resulted yearly 50% reduction on equipment related incident
* Enhance the HSE Program with management participation and employee involvement. Accident Rate have reduce significantly since 1997 (Reduction > 25% every year in First Aid, Recordable Case and Lost Day Case)

* Acting as HSE Group Leader from July 1999- Jun 2001. Manager 7 Engineer from all other HSE Team including Environmental, Industrial Hygiene & Contractor Safety
* Project Leader for all Intel New Product & Technology Transfer since 1997 - Present (Pentium 1 – Pentium 4 including Xeon and Celeron) and other expansion project. Involve in as earlier as the Tender Bidding to Project Commissioning and Hand Over. Using Construction Manual Process Module to exercise the HSE expectation and requirement during Design Stage & Project Map Day.
* Chairman Committee 1st Safety Awareness Campaign in 2001 partnership with Employee and Contractor (~ 9000 Employee). Launching ceremony by Dato'Lee Lam Tye NIOSH Director
* Committee Secretary for ISO 14K 2002 and Prime Minister Award in Safety in 2001. Successfully win both awards in National Level. Co-Chair person for National Hibiscus 2001 Participation Committee. Won Notable award on National Level

HSE Engineer – INTEL CORPORATION, Chandler, AZ USA (January 97 – December 2000)
Key Achievement:
1. LTI Yearly Reduction Rate decrees by 50% Yearly. End of Dec 2000, Intel Malaysia achieves 0.24.
2. 1st Malaysia Presented in Intel Development Forum in Santa Clara, US
3. Intel Content Expert in Equipment Design Safety, Electrical Safety & Construction Safety
4. Lead Asia HSE Development Team in new product development for Pentium 3 & Celeron in China, Philippine & Costa Rica including Malaysia

Key Function
* Work assignment in Chandler Arizona – HSE Engineer
* 1st None US HSE Personal to be part of New Technology Development Team for New Product Design
* Represent HSE AZ site for Intel Yearly Development Forum
* Trained in few discipline in HSE – OSHA, NFPA, NEC by professional body
* Team members in Intel New Self Safety Assessment (SSA) Program. Develop and trained ~ 5000 personal from all level on new SSA Process. Worldwide Staff start of using New SSA Starting June 1999.

Contractor Safety Engineer, INTEL TECHNOLOGY (M) Sdn Bhd, July 1996 – January 1997)

Key Achievement:
1. 1st Factory & Company in Malaysia to conduct Comprehensive HSE Contractor Safety Passport Program. Trained and Certified ~ 5000 Contractor at Penang Free Industrial Zone – FIZ. Later the program have been adopted by NIOSH – Contractor Safety Passport
Key Function
* Establish the 1st Contractor Safety Training Program. Develop 6 Safety Training Modules (Electrical Safety, Welding Safety, Fabrication Safety, General Safety, Construction Safety and Ionizing Radiation Safety).
* Co-partner with NIOSH to establish first Penang FIZ Contractor Safety Program, YTD the program has trained > 10K Contractor thru Penang with cooperation by PSDC.
* Kick-Off the 1st Contractor Safety Training. Develop the Training Material with 6 different trades by nature of contractor work.

OVERSEA TRAINING & WORK ASSIGNMENT

* August 97 – December 97, Arizona United State
5 Month Work Assignment to US. Been trained in new HSE Management method, Incident & Injury Free Culture, Behavior Safety. Develop Training Material to suite Asia Pacific Site with addition on culture specific items. Attended Train the Trainer session with DUPONT Consultant and other Inventor of the program. Significant changes have been made to Malaysia and other Asia Pacific site to shift paradigm from existing HSE Management System to New HSE Management approached "Changing Behavior". Lead the APAC Site Implementation.

* May 99 – June 99, Makita, Philippine
Starting Road Tour on Implementing new HSE Program to Philippine. Performance system evaluation and benchmarking. Generate Long Term HSE Management Plan and presented to the Site Management for implementation. Align implementation consistency with other APAC Site on Program and expectation.

* August 99 – September 99, Santa Clara, United State
Attending Cooperate HSE Meeting. Presented paper work on "Behavior Safety – Implementation learning from APAC perspective" at Intel International IMAC Conference.
Attending ASSE Yearly Exhibition in Santa Clare. Preparation for new Pentium Development Transfer to Penang from Santa Clara. Benchmarking Overall Intel Corp HSE Performance and Gap Analysis. Presented recommendation to HSE Director for implementation.

* June 00 – July 00, Arizona, New Mexico United State & San Jose, Costa Rica
Attended Face to Face Meeting with HSE Cooperate Director. Establish 10 Years plan 2001-2010 HSE Comprehensive Plan – Main Element is Changing Behavior & Staff Engineering Competency as High Focus Area. Benchmarking Intel performance with other Company (Exxon, Dupont, Dell and Motorola) on HSE Performance.
* April 02 – April 02 – Singapore
Conducted Semiconductor Safety Evaluation on Equipment (SEMI) and conducted special Training for 60 Senior Engineer & Development Engineer from across Asia on HSE Engineer Requirement for EU and US Market. Performed Equipment evaluation on 6 Equipment Supplier base in Singapore using SEMI and EU HSE Standards. Report Assessment and recommendation to Intel Cooperate.

* July 02 – August 02, New Mexico & Arizona United State
HSE Program Manager for New Technology Development represents APAC Site. Participate in Pentium 5 Development stage and provide HSE Engineering Evaluation on process, equipment and product development stage. Experience 1K Clean Room Design and Engineering Development as part on FAB Readiness in APAC by Q2 2003

CERTIFICATIONS/QUALIFICATIONS

* Prime Minister National Award in Occupational Safety and Health – 1996 & 2001
* Hibiscus Award – Notable Award – 2001
* ISO 14000 – Environmental Quality Award
* National Prime Minister's Quality Award – 1996, 1997 & 2000
* ISO 9000 – Since 1996
* ISO 9001 – Since 1997
* ISO 14001 – Since 2003
* Lead Auditor for OHSAS 18001 – IRCA Registered
HSE Cooperate Audit - Lead Auditor, ISO 9000 Quality Systems Auditor, ISO 14000 Environmental Management Systems Lead Auditor, OSHAS 18001- Auditor & Chair Person, Electrical Safety Courses – Course Owner & Developer, Incident & Injury Free in Work Environment, OSH Management and Risk Assessment,
TRAINING
Conducted ~ 500 Hours of Various HSE Training in Safety, Environment, HSE Management, Behavior Safety, General HSE, Office Safety, Contractor & Construction Safety, and Legal & OSHA 1994 Compliance & HSE Orientation. Certified NIOSH External Course Instructor. Attending various HSE Training both in Malaysia and Oversea

Engineering Project Management Workshop, U.S. Environmental Regulations, DUPONT HSE Management Audit, Electrical Safety, Construction Safety & Project Management, Unreviewed Safety Question Determination (USQD), SEMI HSE Requirement, NFPA Code Compliance, Operational Readiness Review, Integrating ISO 9000 and ISO 14000, Performance-Based Auditing and Verification, Hazardous and Mixed Waste Processes, HAZWOPER 24-Hour Hazardous Waste Operations, Lock-Out/Tag-Out, OSHA Arsenic/Cadmium/Lead, DOE General Employee Training

Computer Skills
- Very strong computer fundamentals in both hardware and software applications
- Several years of experience in web page design
- Proficient in both Microsoft Office and Lotus Smart Suite
- Successfully operated in Windows 95, 98, ME, 2000, NT and XP
- Knowledgeable in the following software packages:
- Knowledgeable in computer hardware operation and assembly
- Several years of hands-on experience in upgrading and building computer systems

AWARDS/HONORS

* Corpate Division Excellent Award in HSE Management
* Best Site in APAC – 2000. Achieving 0.15 in Lost Day Case Injury and setting new world benchmarking in HSE
* Intel Malaysia Excellent Achievement Award (1997–2001)
* Dean List for Semester December – Master in Industrial Safety Management UKM

ASSOCIATIONS

* Institution of Occupational Safety and Health of United Kingdom (Associate Members);
* American Society of Safety Engineer ASSE Chandler, Arizona (Members);
* Malaysia National Institute of Occupational Safety & Health (Members);
* Old Putra Association – Royal Military Collage
* IRCA – OSHAS 18001 Lead Auditor
* PIMMAG Cooperate Members

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2001 to 2050 of 2567)

Go to Search Parameters...

Brief Description

QA QC Engineer, Laboratory Manager,

HR driver licence [Austr], Austr QF cert 3, Austr ESI cert 3, International switching Authorisation up to 88kv, Victorian line worker registration, WA licence for High Risk work, First Aid, Oh service testing [Metrel, NST], Safety blue card, EWP card, Internat Maint Electrician 4yr appy + 8yr exp

Industrial Projects CAD Operator

Mechanical-Piping Engineer - experienced in piping and procurement related activities for both offshore as well as onshore facilities

1. Mines planning engineer. 2. blasting engineer. 3. excavator incarge. 4. suppervisor. and 1. Bachellor of Engineering (Mininig Engineering). 2. Blasting Certificate.

1. Specialized in Occupational Health, Safety & Environmental Management System in Industrial Establishments & Enterprises; in Health Care Facilities and Biotechnology & Pharmaceutical Companies; 2. Expert in Risk Management & Loss Prevention and 3. Talented Trainer in Occupational Safety & Health

Fresh postgraduate in the field of Environmental Sciences.

I am a qualified and experienced Fire Safety person with more than 23 years of oil and gas experience. Worked in middle east, far east and in Africa. Can command and handle Fire Safety depatment of any set up

As a Project/Contract Mgr, my background is in Construction. I have worked with Owners/Clients, Architects, & Engineers. I am experienced in continuous improvement in construction, process, & people mgmt. I'm experienced in business & project mgmt in small, large, & mega const. projects.

Projects Estimation Engineer

Geospatial Analyst with over 10 years in GIS, 4 years in remote sensing, 8 years in autocad, 4 years offshore drilling, and a Geology degree.

Areas of expertise include Civil/ Mining Management, Construction Supervision, Project Management and Procurement.

IT Professional seeking to apply talents toward a new challenge. Possess a unique combination of analytical & communication skills that have contributed to my effectiveness in client relationship building, needs assessments, contractual negotiations & technical project management.

Having an experience of more than 10 years in the field of project system design & execution

e-learning, instructional design, corporate training, ADDIE, CBT, WBT, ILT, Lectora, Flash, Captivate

I have been in the Diamond Drilling industry for 15 yrs and have travelled all over the world drilling all/various types of rock in extreme environments. I work well with others or individually and strive to complete the job(s) assigned in a effectiive, reliable, safety manner.

Environmental project scientist with project management experience in the areas of oil and gas and dry cleaners. I have extensive Phase I and Phase II experience. I have a proven track record of being on time and within budget while working on multiple projects.

Recent graduated geologist. Looking for a challenging career in geoscience anywhere in the world. Good comunication and teamworking skills

Nurse wanting job in Iraq or Kuwait

Electrical engineer, Matlab, PLC, Labview

Area Working: Quality Assurance External Supplier - Customer Supplier Relationship-Business Manager/Project - NDT Control-Project Engineer-Quality responsible project - Interest for working in Middle East for Oil and Gas Project

I'm specialized in developing new water based decorative paints and in modifying existing decorative paint formulations.

B.Tech in Chemical Technology with Experience in Technical Sales and Services

I have gained in excess of twenty five years experience in the construction petrochemical industry which includes offshore and onshore oil & gas projects for such companies as Shell, Arco, McDermott, Hyundai, ConocoPhillips, Premier Oil, Saipem, Unocal and Statoil

Bs. in Metallurgical Engineering, Ms. Environmental Engineering, Ms. Mining Engineering. 3 years experience in mineral processing and mining and 1 year experience in environmental auditing. I'm analytically skilled, good at working in a team, can carryout complex task with no supervision

Dual Post Graduate Mechanical Engineer with 10 years of experience

In May 2009 I will graduate from Texas Tech University with a Masters Degree in Transportation Engineering, with 3.66 GPA. With over 1 year of experience in Commercial Project, I have developed a strong background in Planning and designing.

M.tech graduate doing my final year in chemical engg. i am doing simulation project with the help of CFD(simulation of stirred bubble column using CFD) and i have participated the training program in Aspenplus software. i am looking a better job related to simulation and design.

Repairing & Troubleshooting Computer Hardware, Printer’s and UPS etc. Data Communications & Computer Networks (Networking using windows OS 95, 98, NT, Active Directory & ISA Server). Familiarity with LINUX OS (Installation & Configuration). Electronic Devices and Circuits. MS Office.

Degree in Geological Sciences. Experience in laboratory of total and clay mineralogy analysis, sedimentology and petrography. Use of stereomicroscope and polarizing microscopy. Good knowledge of Office programs and basic AutoCAD and ArcGIS program.

Broad experience in Petroleum Exploration and Production With cross-functional expertise in Operating, Commissioning, Maintenance, Testing, Training and Safety / Environmental Compliance.

Network Engineer

Arc view 3.2a, ERDAS Imagine 8.7,Arc GIS 9.1, (All extensions),AutoCAD/DeskMap,Ms Office ,DEM,Spatial analysis,DBMS

GIS, Geophysical Data Processing, Mapping, Airbone Surveying

Have 12years of experience in foods, cleaning, warehouse etc.

Experience in ISO 9001, ISO 17025, ISO 17799 , Good Laboratory Practices(GLP) systems. The ISO 17025 and GLP are mainly focussed on testing and clinical laboraories. Almost 7 years of experience in Qulaity Management Systems as well as and System Administration activities.

Deployed as Armed Response Vehicle crew to incidents which require firearms support, including dedicated armed patrols to specific areas of London.

Business Process Modeling • Process optimization • Project management • Lean Six Sigma • Predictive and Simulation modeling • Manufacturing reengineering • Data analysis • Metrics development and reporting • Organizational development • Sales effectiveness • Supply Chain Management • Patent engineer

General manager of Services Company / QHSE and Management systems Oil and Gas sectors

SKILLS - HSE issues, mechanical engineering, fluid metering, instrumentation, ability to work and learn fast. QUALIFICATIONS - B.Eng. (Mechanical Engineering) , PGD (Mechanical Engineering)

I am able to effectively perform set tasks, successfully fulfil the task objectives and meet their dead-lines. I report information to the necessary authorities by means of written and/or verbal reports which are reliable and accurate.

Passion for safety; Proven skill to integrate owner/client needs with worker abilities; Deep intuitive understanding of motivations/goals behind differing party's actions; Experience-driven, reality-based understanding of varying industries and their roles in global development

QC Mechanical, API 570, API 653, CWI & NACE coatings inspector

SAP Materials Management, ARIBA E-Procurement, Purchasing, Inventory and Warehouse Management

Free! Chemical process operator, Heavy equipment operator, Emergency Response Team Captain, Health and Safety member,

I have four years of hands-on benchwork experience in chemistry labs in University of Houston as a research assistant.

Technical, Managment, communication. Skills

Operations Manager; Telecommunications; Administrative; Business Development

Proven GIS Specialist, Project Manager and Dynamic Force for the Successful Implementation and Transformation of GIS Standards and Systems

Talented and value driven professional with 9+ years of experience in health, safety, environmental and quality management. Motivated by challenge and rewarded through key initiatives that aid continuous improvement, as well as profitability and productivity.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 [ 41 ] 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out