Resume - Expertise in hydrological analysis and design, river engineering studies, analys...

Misco Jobs

Resume #21675

CONTACT INFORMATION:
View contact information...

Water Resources Engineer

PROFESSIONAL EDUCATION

CIVIL ENGINERING
From: July 1983
Until: August 1988
Country Bangladesh
City Dhaka
Year of diploma 1988
Name of diploma B.Sc in Civil Engineering
Institution Bangladesh University of Engineering and Technology (BUET)
Description (subjects) Civil engineering subjects

WATER RESOURCES ENGINEERING
From June 1991
Until December 1995
Country Bangladesh
City Dhaka
Year of diploma 1995
Name of diploma M.Sc in Water Resources Engineering
Institution Bangladesh University of Engineering and Technology (BUET)
Description (subjects) Fluid Mechanics, Hydrology, Hydraulic Structures, Sediment Transport, Physical Modelling and Hydraulic Similitudes, Advanced Mathematics, Irrigation and Drainage Engineering and Coastal Engineering
Thesis Schematised Sediment Transport Predictor for Study of Alluvial Rivers: An Application to the Jamuna

LANGUAGE SKILLS
Language Mother tongue Reading Writing Speaking
Bangla Yes Excellent Excellent Excellent
English No Excellent Excellent Excellent

MEMBERSHIP OF PROFESSIONAL SOCIETIES
1. Professional Engineer (PEng.), Bangladesh Professional Engineers Registration Board (BPERB)
2. Fellow (F/5653), The Institution of Engineers, Bangladesh (IEB)
3. Graduate Member (GM-266), Bangladesh Computer Society (BCS)

WORKING EXPERIENCE WITH INTERNATIONAL CONSULTANTS
Far East: Dr. Ranjit Galappatti, Chief Technical Advisor, Lanka Hydraulic Institute, Sri Lanka.

Europe: Dr. J. A. MacDonald, Team Leader, Sir M. Macdonald and Partners Limited, UK; Mr. Frank Peacock, Team Leader, Lahmeyer International, Germany; Mr. Johan G. Grijsen, Team Leader, Delft Hydraulics, the Netherlands; Mr. Carsten Staub, Morphologist, DHI Water & Environment, Denmark

North America: Mr. David E. Bogan, Team Leader, Harza Engineering Company International, U.S.A

Asia: Mr. Hideyuki Ishie, Project Team Leader, Japan Oil Engineering, Japan; Mr. Minoru Shibuya, Team Leader, Nippon KOEI CO. Ltd, Japan, Mr. D.H. Kim, Hyundai Engineering and Construction Co. Ltd. Korea

PROFESSIONAL EXPERIENCES
From February 2005
Until To-date
Country Bangladesh (South Asia)
Post Project Leader (part time)
Project Feasibility study using mathematical modelling for the protection of Faridpur town and it's adjoining area from erosion of the river Padma in upazilla sadar and Charbhadrason under the district Faridpur
Employer Bangladesh Water Development Board
Financing agency Government of Bangladesh (GoB)
Description of the work My tasks in this feasibility study were: 1. Completed negotiation meeting with the client regarding technical and financial proposal and get the project approved and contract agreement made. 2. Prepared ToR for individual consultants such as Environmentalist, Sociologist, Economist, Design Engineer etc. and made contacts with competent firm/individuals to ensure those inputs for the projects 3. Prepared specifications for river surveys (bathymetric, river bankline, flow and water level etc.) in accordance with the contract and deployed the survey team at the field for carrying out surveys4. Collected secondary hydrometric data (water level, discharge etc.) for the Padma River to carry out hydrological analysis at the project site in order to generate ungaugaed data at the project site with the use of MIKE 11.5. Prepared river set-up for both 1-dimensional and 2-dimensional modelling by MIKE 11 and MIKE 21C and the activities are in progress.

From June 2004
Until February 2005
Country Bangladesh (South Asia)
Post Morphological Modeller
Project Feasibility Study of Padma Bridge in the People's Republic of Bangladesh
Employer Nippon Koei Co. Ltd. Japan through IWM
Financing agency Japan Internation Cooperation Agency (JICA)
Description of the work My tasks in this feasibility study of Padma Bridge were to:1. Carried out hydroloical analysis in and around the Padma River on the basis of extreme value analysis for the annual maximum series of water levels and discharges. The hydrological years corresponding to the different flood return periods of 2-, 5-, 10-, 25- and 50-year are selected and are used as the hydrological boundaries of the 1-dimensional model to simulate water levels and discharges along the river network for the respective return periods.
2. Developed 56 km long two dimensional morphological model of the Padma River utilizing the state-of-the art tool MIKE 21C. The model was used to assess the short-term impacts on the river morphology due to construction of the proposed Padma Bridge and associated river training work. The results of this model was used to verify the hydraulic design parameters and dimension of the bridge and river training work3. Supervised river surveys (bathymetric and flow measurements) and geotechnical investigations (exploratory boring at six sites along both bank of the Padma River) in the study area.4. Carried out management and financial aspects of the project and maintained close liaison with the JICA study team members.5. Prepared quite a good number of project reports (Inception report, Interim reports on river surveys, geotechnical invesigations and mathematical modelling, Draft Final Report and Final Report) in collaboration with JICA study team members and in-house project resources.

From May 2003
Until June 2004
Country Bangladesh (South Asia)
Post Project Leader
Project Morphological study for erosion prediction and mitigative measures at the vicinity of the Jamuna Bridge and structural measures against possible unification of the Jamuna and Bangali River.
Employer Jamuna Multipurpose Bridge Authority (JMBA)
Financing agency Government of Bangladesh (GoB)
Description of the work The aim of this project is to issue morphological forecast for three monsoons 2003-2005 for facilitating the operation and maintenance measures of the Jamuna bridge. My tasks in this study project were to:1. Prepared project proposal, submitted to the client, negotiated technical and financial proposals and get it approved by the client and made contractual agreement2. Developed two-dimensional morphological model of the Jamuna River in the vicinity of the bridge and issued forecast interms of morphological development of the river (channel planform, river bed erosion, scour development and bank erosion) before the advent of the monsoon season to assist the bridge authority for a more effective monitoring and maintenance programme of the bridge.3. Maintained close liaison with the client interms of technical, administrative and financial matters of the project.4. Prepared project reports (Inception report, survey reports, forecast report etc.) and presented the findings to the client and related other agencies.

From July 2002
Until April 2003
Country Bangladesh (South Asia)
Post Deputy Project Leader
Project 36 Nos. River Bank Protection & Development and Town Protection Sub-Projects (Technical Feasibility Study by Mathematical Modelling)
Employer Bangladesh Water Development Board (BWDB) through IWM
Financing agency Government of Bangladesh (GoB)
Description of the work My tasks in this bank protection project were to:
1. Carried out hydrological analysis of the study area2. Developed two-dimensional models for the rivers by MIKE 21C software and provided design parameters like design flow, design velocity, maximum water depth, scour depth, highest water level, lowest water level, types of mitigation measures (revetment or groyne) and length of riverbank requiring protection.3. Assisted project engineers on model development and reporting etc.4. Prepared training material for on-the-job training for the client engineers and conducted and coordinated the training5. Made liaison with the client in terms of administrative and financial management of the project.6. Prepared project reports (Inception, Interim, Draft Final and Final report) in accordance with the contract in collaboration with project engineers.

From July 2001
Until June 2002
Country Bangladesh (South Asia )
Post Hydraulic Modelling Specialist
Project Oil Spill Impact and Response Management Programme
Employer Japan Oil Engineering Co. Ltd. Japan through IWM
Financing agency Asian Development Bank (ADB)
Description of the work My tasks in this oil spill project were to:1. identify the key transport paths, spreading and weathering areas of oil spills in the Sundarban (declared as world heritage site) rivers in the southwest Bangladesh.2. Develop oil spill model for the Pussur River in collaboration with Japanese counterpart for assisting the preparation of national oil contingency plan.3. Assist in the mapping of all areas sensitive to oil spill contamination.4. Conducted training programme on the oil spill modelling for the engineers of Mongla Port (the second largest sea port in Bangladesh) and officials of Coast Guard, Bangladesh Navy.5. Prepared project reports on oils spill modelling in collaboration with Japanese counterpart.

From January 2000
Until June 2001
Country Bangladesh (South Asia )
Post Project Leader
Project Surveys and mathematical morphological modelling of the Jamuna River at Bangabandhu Bridge site
Employer Jamuna Multipurpose Bridge Authority through IWM
Financing agency Government of Bangladesh (GoB)
Description of the work My tasks in this bridge project were to:1. Determine 25-, 50- and 100-year return period floods through hydrological analysis to identify actual hydrological year to be used as model boundry for issuing morphological forecast in the vicinity of the bridge. 2. Issue regular morphological forecast (using MIKE 21C modelling software) within the vicinity of the bridge before the advent of each monsoon season to assist the bridge authority in planning the monitoring and maintenance measures of the bridge.3. Provide monitoring programme (cross-section, flow and bank erosion etc. in the vicinity of the bridge area) with time of monitoring and frequency of monitoring to take care of probable critical situation and thus assist the bridge authority in drawing up preventive measures for any unwanted situation that might arise for the bridge and associated bank protection work during the ensuing monsoon.4. Supervise the in-house professionals involve in the technical tasks of the project.5. Manage the project budget: maintain a financial management and reporting system for the project.6. Conducted on-the-job training programme for the engineers of the bridge authority on the state-of-the art technology mathematical modelling with MIKE11 and MIKE 21C modelling software.7. Prepared all project reports, in accordance with the contract in close collaboration with all the line specialist assigned to the project.

From March 1999
Until December 1999
Country Bangladesh (South Asia)
Post Hydrologist
Project Hydraulic Modelling Study for Haripur Combined Cycle Power Plant
Employer Hyundai Engineering & Construction Company Ltd. – Korea through Institute of Water Modelling (IWM)
Financing agency Hyundai Engineering & Construction Company Ltd. – Korea
Description of the work My tasks in this power plant project were to:1. Provide formation level of the power plant for 200-year return period through hydrological analysis of highest water level (3 parameter log normal distribution using modified maximum likelihood fitting procedure).2. Provide lowest water level for 200-year return period through hydrological analysis and the use of MIKE 11 to assess critical flow conditon for the cooling water intake of the power plant.3. Provide design parameters for the bank protection work by two-dimensional modelling using MIKE 21.4. Provide local scour levels adjacent to structures related to the construction of power platn.5. Assess the sedimentation potential for the cooling water intake channel.6. Prepare report in co-operation with expatriate Danish water engineers of the project.

From February 1997
Until February 1999
Country Bangladesh (South Asia)
Post Water Management & Drainage Engineer
Project Compartmentalization Pilot Project (CPP)
Employer Lehmyer International, Germany
Financing agency European Union
Description of the work My tasks in this project were to:1. Assess hydrological impacts of the Jamuna bypass and railroad passing through the project area and suggest remedial measures (such as inclusion of new culverts, enhancing existing culvert opening, re-excavation of existing canal etc.) for smooth cross drainage flow.2. Supervise in developing the flood management model of CPP; the model was used to analyse the real time inundation in the project area due to breaching of the embankment through onrush of flood water.3. Estimate sediment budgeting through sediment measurement in a number of canals and rivers in and outside the project area.4. Prepare drainage inventory for the project area to identify the drainage related problems of each chawk (a small agricultural farm).5. Evaluate the performance of the constructed water management infrastructures in the project area through regular field visits and interviewing with stakeholders.6. Prepare training material on water management operation and maintenace aspects.7. Conducted training to the water management committees at different tiers for operational aspects of the water management infrastructures (such as inlet, out, regulator, bridge, culverts etc.).8. Prepare project reports in collaboration with Junior water management engineers.

From October 1993
Until January 1997
Country Bangladesh (South Asia)
Post River Engineer
Project River Survey Project (FAP 24)
Employer Delft Hydraulics, the Netherlands
Financing agency Commission of the European Communities
Description of the work My tasks in this project were to:1. Assist in developing the two-dimensional morphological model of the Ganges-Gorai Rivers using MIKE 11 and MIE 21C software; the model was used to assess the restoration of flow into the Gorai River.2. Compute suspended sediment discharge in the unsampled zone near the riverbed.3. Develop relationship between the exponent of flow velocity and the Shields parameter by analytical and numerical solutions4. Develop schematised sediment transport formula for the Jamuna and the Ganges rivers.5. Analyze overland flow measurements in the Jamuna floodplains6. Optimize hydraulic and sediment transport measurements in the braided Jamuma River.7. Analyze river cross-section data; compare cross sections data by satellite image, BIWTA soundings and BWDB cross-sections.8. Offer training to the engineers of Bangladesh Water Development Board (BWDB), Bangladesh Inland Water Transport Authority (BIWTA), Surface Water Modelling Centre (SWMC) and Water Resources Planning Organization (WARPO) on the hydraulic and sediement transport measurements in large alluvial rivers.9. Prepare and assisted in a number of project reports in collabation with Bangladesh and Dutch engineers.

From December 1990
Until October 1993
Country Bangladesh (South Asia)
Post Junior Engineer
Project Surface Water Simulation Modelling Programme, Phase II
Employer Surface Water Modelling Centre (SWMC)
Financing agency Danish International Development Agency (DANIDA)
Description of the work My tasks in this project were to:1. Assisted in model set up, calibration and verification of 1-dimensional hydrodynamic, sediment transport and morphological modelling for some of the river systems in the southwest region of Bangladesh using MIKE 11 software.2. Delineate catchment areas of southcentral region of Bangladesh; delineation flood cell of different rivers in southwest region of Bangladesh.3. Process hydrological data; carry out frequency analysis of rainfall, water level and discharge.4. Carry out several tidal discharge measurements in the southwest and southcentral regional rivers of Bangladesh.5. Analyse grain size distribution of suspended sediment samples and bed material for the southwest and southcentral regional rivers of Bangladesh.6. Supervise land surveys for checking the BM values for the southwest region of Bangladesh.7. Monitor, verify and supervise water level gauges and discharge measurement stations of Bangladesh Water Development Board (BWDB) and SWMC to improve data collection program.

From April 1989
Until December 1990
Country Bangladesh (South Asia)
Post Junior Engineer
Project National Water Plan Project, Phase II,
Employer Master Plan Organization (MPO)
Financing agency Danish International Development Agency (DANIDA)
Description of the work My tasks in this project were to:1. Assisted in the development of groundwater modelling to estimate the amount of potential recharge.2. Analyse borelogs data.3. Distribute soil types with respect to flood phases.4. Construct contours showing the depth to groundwater table, groundwater elevation and groundwater fluctuation etc.

From September 1988
Until March 1989
Country Bangladesh (South Asia)
Post Site Engineer
Project Construction of Services and Facilities Centre at Belkuchi, Sirajganj under Bangladesh Handloom Board
Employer Engineers Consortium Ltd.
Financing agency Government of Bangladesh (GoB)
Description of the work My tasks in this project were to:1. Supervise building construction in accordance with the agreed specification of work.2. Prepare weekly progress report and submit to the client3. Maintain liaison with client about project matters.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 2396)

Go to Search Parameters...

Brief Description

Senior Geologist with expertise in applied geology (geology applied to mining including blasting, slope stability, hydrogeology, reclamation, etc), research, evaluation and communication skills. Preference is contract or project work.

*Knowledgeable of a broad base of local, States and Federal regulations: including DOT, OSHA, States R-T-K, VOCs, HAPs, TSCA, EPCRA, CERCLA, SARA, confined spaces, hazardous/non-hazardous wastes including waste reduction, worldwide inventory status, etc.

Excellent knowledge of environmental, health, and safety (EHS) regulations. HazMat Certified. First-rate skills in presentations, leadership, and problem solving. Diplomatic with good communication and interpersonal skills. Excellent knowledge in computer applications. Bilingual English - Spanish.

Qualified QEP with proven expertise and success in the planning and implementation of environmental and waste management programs. Proven success in program planning and delivery in China and Southeast Asia

Metallurgical/Environmental/Maintenance/Process/Project engineer with 30 years experience in hydrometallurgical, mineral processing, process, project, maintenance, environmental, lab, computers and budgeting.

Industrial By-Product environmental compliance and management, that focuses on utilization wherever practical to reduce costs while maintaining environmental safety. Primary experience is with coal combustion by-products.

Master degree in Environmental Health, More than 15 years working in environmental Health field.

I AM A MASTER STUDENT IN WATER ENGINEERING FIELD. I HAVE ABOUT 8 YEARS EXPERIENCE IN WASTEWATER INDUSTRIES. I CAN WORK INDEPENDENTLY AND GROUP WORKING.

Five years experience on various aspect of remote sensing and GIS techniques in groundwater exploration, land use mapping , 3D analysis etc from satellite data,

I have completed a graduation degree in electrical engineer and doing Master degree in electrical by availing study leave from the railway , because i am pemanent employee of India rail working at the post of section engineer (power supply ) and train lighting

I have over ten years of experience related to construction, operation and management of hazardous and solid waste management facilities, environmental site assessment, environmental impact assessment, technology evaluation. Currently I’m completing a master degree of Environmental Engineering

I am a Senior Environmental Project Manager (> 12 years experience) specializing in Environmental Remediation and Construction Management. My areas of expertise include project management, construction management, scheduling, document control, cost control, quality assurance, and quality control.

I did Master's Degree in Exploration Geophysics and Sixteem years experience in the field of groundwater exploration.

I am a Graduate of ENvironmental Engineering with PG Diploma in Industiral Pollution Control and MBA . I am having 16 years of experience in Environmental Engineering field in petroleum sector. I am EMS Lead Auditor too.

I have ample experience in foundation investigation of dam sites, road allignment, building sites and slope stability assessment studies.

I am graduate Mechanical Engineer having 12 years of experience in the field of Machine Maintenance, Reconditioning, Project Management & Plant Engineering in Manufacturing Industry.

To manage and provide direction and regulatory expertise to efficiently develop, implement, audit and maintain procedures and programs in compliance with regulations and company policies.

12 years total in the telecommunications field. Currently working in a NOC testing, troubleshooting, building and initiating DS1, DDS, frame relay, IP, SS7 and voice circuits.

I am a Hydrogeologist/Aqueous Geochemist. I hope to utilize my problem-solving skills, analytical abilities, and knowledge gained through working experience in providing innovative solutions to the company’s operations. I hold a PhD from New Mexico Tech in the area of Environmental Geochemistry and

Design and Fabrication/drafting Plans/various design of industrial equipment

I have extensive experience in treating large animals and birds

I am a post graduate in Chemistry as well as Ecology and Environment. I have worked with Petrochemical industries for the past 18 years. Presently I am working with Veba oil Operation, Libya for the last 2 years as water treatment specialist. I am well experienced in DCS operated production also.

Safety engineer

Expertise in hydrological analysis and design, river engineering studies, analysis of sediment transport and river morphology, river modelling with MIKE 11 and MIKE 21C, water management with people’s participation. Excellent managerial and communicative capabilities as well.

PE with 13 yrs exp in petroleum ind, gov research, eng consultancy, proj manager for RCRA/CERCLA programs for the U.S. Air Force. Past 6yrs managed the tech proj planning, budgeting, cost estimating, contract proc/admin, and contractor oversight for the execution of eng invest, const and O&M projs.

Doctorate degree in the field of Environmental Science with five years experience in research and development and five years experience in teaching, education, administration and academics.

I have 40 Years experience in environmental construction field, I have worked from the estimate to close out of projects. I have been responsible for Safety, scheduling ,budget, management of each project.

Process Supervisor

Technical sales, Technical support, presentation, negotiations,

Environment Specialist at an environmental consulting firm engaged in the conduct of EIAs, Feasibility Studies and Environmental Due Diligence and various environmental consulting services

Environmental hydrogeologist with great expierence in assesment and remediation of ground water contamination

Mechanical Design, CAD-Pro/E, Unigraphics, Ideas

A highly talented Environmental Engineer with 10 years of involvement in identifying sources of environmental pollution, preparing reports, recommending corrective measures to Control and Remediation of Environmental Health Hazards.

Marine Engineer---Second Engineer

Qualified and experienced mold cum product design executive with extensive experience gained from consumer electronics and automotive industries molding requirements. Experienced in meeting strict deadlines through personal commitment

AutoCAD-2000/004 (X-ref, Xref-Manager, Model Space, Paper space, 3D Modeling, Animation, Working in layers) drawing.

Basically Hydrogeologist, working on land and water resources development and management from last one decay. I am Doctorate in Geology and Post graduation in Applied geology, working in RRL (CSIR), Bhopal India which is Min. of science & Tech., Govt. of India.

Having eight years experience in food analysis, HACCP implementation, operational, quality assurance.

A results-oriented senior level professional with 30 years of demonstrated success in analyzing, evaluating, training and implementing improvements to enhance efficiency and performance of the team. Skilled at utilizing teamwork across all disciplines of the company to achieve increased productivit

Engineer with 10 years of experience is looking for a job as infrastructure and/or environment engineer on planning, design, supervision or construction of international projects that are a challenge due to tight schedule and big pressure. Any where in the world.

I have post graduate degree in Environmental sciences from Canada. I also have a Masters degree from Hungary in trasportation engineering (Civil). I worked in Europe, Asia, Africa and Canada as well. I speak four languages (English, French, Hungarian and Bengali). I have 12 + yrs. of experience.

Experience 15 years in • Project Management – 4 yrs • Engineering consultancy – Water & Wastewater treatment, Air pollution control equipment & Environmental Audits. – 4 yrs • Sales & Marketing – 4 yrs • Corporate planning – 3 yrs

Environmental professional relishing challenges Multilingual communication skills. Knowledge of international environmental regulations Good organization, teamwork, and leadership skills. Organized and effective time manager.

Senior Project Manager

NZQA-National Cert in Commercial Road Transport, HC License, Forklift Endorsement, Heavy Wheels, Heavy Rollers, Heavy Track Endorsement (NZ), 3yrs Secondary School Education, 20yrs in the Transport Industry, customer service.

Electro Machanical Technician ,packaging PLC.1 /2/3

I am looking for Hydrogeologist/Computer Modeler Position I have PhD in Fluid Dynamics, solid background in Numerical Methods, and broad experience in computer modeling in area of Civil and Environmental Engineering

Manager of proposals and technical support to marketing experience 5 years. Experience in Latin America and Middle East. Project manager experience 15 years: wastewater treatment plants, power plants, solid waste facilities. Excellent technical writing, computer literacy

Job Title : Software Enginer Education : Ordinary Degree in Bachelor of Science Previous Employer: Motorola Australia Software Centre

Having 15 years of experience in the field of Geology

1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out