Resume - Microwave and down level technician

Misco Jobs

Resume #22676

CONTACT INFORMATION:
View contact information...

EDUCATION: -1985 Electronic colledge (3 years)
1981 High Technical School Unirea with speciality Electronic Circuits & Equipment for Computers

COMPUTER SKILLS: Windows 2000P,MS Office, Marconi Radiorelay Equipment

QUALIFICATION: Electronic Technician

EXPERIENCE:
Full time:
- Since 2002-S.N.R s.a [National Radiocomunications Company] to Microwave RadioRelay Department. I work like radioelectronic technician for repairing, maintenance and installing microwave equipment with work frequency range from 2.4Ghz throught 13Ghz, specially on analogue equipment and settings ocassualy diferent digitals equipments.
-2001-Merididan SRL-Electronic technician for evaluation of prototype PCB and electronic modules, fault finding and prototype debug and analysis and written reports of results and schematics designs; working with fine pitch SMD in assemblies including RF amplifiers, PIN diodes attenuators,RF printed antennas,VCOs,PLOs in the range 1.9-2.5Ghz.
-2000 - Softwin SRL - data analyst of electronics catalogs; we creating an electronic data bases for Hearst (IC MASTER), containing specifications of i.c.s manufactured worldwide, for a large i.c.s catalog, which will be available on Internet (also using the Internet as the main info source) for these task we use different search engines and different Internet Tools and MS Office Applications
1998 - Intrarom SRL, Department of Production / Testing -like Debug Technician under the direction of the Production Manager. My duty consisting in verification scripts, troubleshooting of electronic systems from digital subscribers, testing and debugging down to component level of analogue and digital circuits - surface mount and through hole. This position involves building, testing and fault finding of prototypes and PCB assemblies of calibration of electronics test equipment - the multiplexing of four telephone channels over a single 2-wire line according the CCITT and ETSI recommendations.
-1996 - Britcom Sistem-SRL, Service Department. I was the Supervisor of the teamwork and Debug Technician. My duties consisted in testing and debugging down to component level of digital cordless phones (FREESTYLE 300,500,1000BT) and answering machines (RESPONSE 80,150,200BT). My duties also included to determinate and draw the electrical schematics for each new type of apparatus, where missing.
1994 - Atlas SRL, Service Department, as the Supervisor and Debug Technician. I coordinated technical activities and validate the modification, improvement, testing and debugging down to component level and fault finding of prototypes of the following circuits: Hf/Vhf/Uhf wideband preamplifiers, in line satellite preamplifiers in frequency range 950-1600MHz, dual distribution amplifiers for the Vhf range( 144 MHz, 470 MHz); 1296 MHz low noise preamplifiers with MOSFETS and bipolar transistors; 470 to 144 MHz low noise converters, TV antennas and DX aerial antennas, active aerial antennas.
1992 - Seltex SRL - I have designed and constructed electronic equipment for processing and displaying the length and thickness of textile fibers (it includes an RF oscillator, amplifier + detection, an acquisition system with an 8 bit ADC).
1992-1988 - Test/Repair/ Debug Technician repairing and testing computers compatible with Sinclair with Z80, improving the memory capacity, constructing some CMOS&TTL logic probes, computer interfaces for floppy disks & printers, EPROM -programmers.
1991-1981 - I.A.U.C. Bucharest (research and manufacture enterprise for testing & measuring instruments) in different departments as follows:
1990 -For graduating like Senior Technician I designed & constructed a system for monitoring water parameters (biotechnological use) including AC-power motor regulator, digital voltmeter design, psihometric measurements, turbulents and AC/DC conversion with data bus circuits for a computer analyze and PCB Design.
1988 - Chromatographic Department as the Supervisor and Debug Technician, working nearly to the Engineering dept. to ensure the successful introduction of new products into production and development; my duties included to describe how a circuit works from a circuit diagram and be able to diagnose and fix faults of construction, testing, troubleshooting, board updating for input sensitivity, thermostabilisation, linearity improvements,ac motor drive precision improvements, new technologies implementation.
1987 - I was the project co-ordinator for the electronic and mechanical team. I homologated an x-t recorder and plotter with a single pen and high sensitivity (1uV/cm) which used Burr-Brown like input amplifier.I also designed and tested a 3 and 1/2 digits milivoltmeter.
1986-1981 - Production Department - I testing and fault-finding of analogue and digital electronic circuits, PCB design and writing the circuit documentation and schemes for digital frequency meters (20Hz - 500MHz),function generators (20Hz - 30 MHz) and different oscilloscopes.
Part time
2000-1982-Repairing and debugging TV receivers,including TV-tuner modifications, test alignment and sound systems modification, cassette deck recorders, radio-cassette recorders with equalizer, radio-transceivers (for radio-amateurs).
1998-I co-operate with a CATV firm like Test/Repair/ Debug Technician down to component level and fault finding of satellite preamplifiers in frequency range 950-1600MHz, low noise preamplifiers with MOSFETS and bipolar transistors,coaxial cables measurement,TV signal distributers,rejection filters for VHF band.
1992-In the same year I collaborated with a small company of audio recordings for maintenance and repair of deck recorders and also to improve the recording for various types of tapes testing and designing different type of audio noise reduction.
1986-I became a radio-amateur and some of my achievements like Dx TV reception improvement (38,9Mhz narrow band preamplifier) and UHF low noise preamplifier(with MOS-fet and bipolar transistor) were published in technical magazines in 1988 and 1990. I continue to collaborate sometimes for the construction of various types of preamplifiers and FM tuner-heads in the range 65-108Mhz

HOBBY - Dx Reception, Chess, Sf Literature, Radio Astronomy

FOREIGN LANGUAGES: English, French

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 251 to 300 of 2568)

Go to Search Parameters...

Brief Description

AutoCAD-2000/004 (X-ref, Xref-Manager, Model Space, Paper space, 3D Modeling, Animation, Working in layers) drawing.

Basically Hydrogeologist, working on land and water resources development and management from last one decay. I am Doctorate in Geology and Post graduation in Applied geology, working in RRL (CSIR), Bhopal India which is Min. of science & Tech., Govt. of India.

Packaging Engineer strong in Plastic Injection Molding, Foam and Corrugated.

Having eight years experience in food analysis, HACCP implementation, operational, quality assurance.

Engineer with 10 years of experience is looking for a job as infrastructure and/or environment engineer on planning, design, supervision or construction of international projects that are a challenge due to tight schedule and big pressure. Any where in the world.

Environment Management Programs

Nine years of experience in energy and infrastructure projects: Refineries, pipelines, sewer networks, sanitation systems, solid waste disposal systems, transmission lines, river and air pollution modeling, environmental technologies, Environmental Management Systems (EMS), risk analysis.

I have post graduate degree in Environmental sciences from Canada. I also have a Masters degree from Hungary in trasportation engineering (Civil). I worked in Europe, Asia, Africa and Canada as well. I speak four languages (English, French, Hungarian and Bengali). I have 12 + yrs. of experience.

Experience 15 years in • Project Management – 4 yrs • Engineering consultancy – Water & Wastewater treatment, Air pollution control equipment & Environmental Audits. – 4 yrs • Sales & Marketing – 4 yrs • Corporate planning – 3 yrs

Environmental professional relishing challenges Multilingual communication skills. Knowledge of international environmental regulations Good organization, teamwork, and leadership skills. Organized and effective time manager.

Seasoned executive with twenty years of experience in specialty chemicals and engineered materials. Proven track record in sales and marketing, ventures, contract negotiation, international business, profit and loss, and product development/launch at senior and general management levels.

Senior Project Manager

Electro Machanical Technician ,packaging PLC.1 /2/3

I am looking for Hydrogeologist/Computer Modeler Position I have PhD in Fluid Dynamics, solid background in Numerical Methods, and broad experience in computer modeling in area of Civil and Environmental Engineering

Manager of proposals and technical support to marketing experience 5 years. Experience in Latin America and Middle East. Project manager experience 15 years: wastewater treatment plants, power plants, solid waste facilities. Excellent technical writing, computer literacy

Job Title : Software Enginer Education : Ordinary Degree in Bachelor of Science Previous Employer: Motorola Australia Software Centre

Having 15 years of experience in the field of Geology

I am having more than 18 years of experience as of now. I am a result-oriented professional with innovative ideas and great communicating skills. Following are highlights of my Experience

13 years of professional experience commercial-business development in petroleum, proffessional on HSE and Quality Assurance Systems (ISO)Word, Excel, and Ms-Project. She has implemented and certified ýSO,EnvironmentalImpact Assessment report

Over 13 years professional & management experience including EMS Quality & HS Management, with world’s leading organizations in multinational environments. Effective managerial and leadership skills. Developed and implemented EHS Management System

Environmental Consultant/Geologist, Experience in Geology fieldwork including monitoring well installation and sampling, remediation, Phase I Environmental Site Assessments and AutoCAD.

Would like to work with Environmental Management Systems. Obtained a MS in Environmental Monitoring and Assessment (Coventry University, U.K.) In current position have implemented and maintained ISO 14001, conducted Environmental Audits, established procedures, delivered training and more

Environmental Engineer and Scientist, speaks 3 languages

Occupational Health Physician

Contaminated Land Officer - Private and Public Sector Experience - BSc/MSc Qualified

I’m a graduate in Mechanical Engineering from United Kingdom.

Telecom Techncinian for PHILIPS and SIMENS PABX also I have good experience in Electronic, computer and network field.

Presently coordinate and allocate the companies resources to project requirements within the private sector. Identifying and resolving environmental problems from a holistic perspective, acknowledging that the political, social, legal and economic aspects of issues are as important as those pertaini

A proactive, versatile and committed Executive Manager with extensive experience spanning throughout the world and accustomed to project and people management, coordinating resources effectively to achieve targets often within stringent deadlines. A skilled problem-solver

CIVIL (TRANSPORTATION) DRAFTER

Exploration geologist : collecting soil samples, stream sediments, rock chip sampling, drill hole logging, IP/resistivity, magnetic survey. Organizing data in GIS datasets and producing of spatially referenced maps and drill hole sections. GIS application - CAD/GIS (Lend desktop). Computer repairman

An engineering management position utilizing my experience in managing commercially driven projects that consistently meets customer requirements.

I have 16 years work experience as Safety Director an Environmental Engineer maintaining compliance with all regulatory agencies , state and federal. I have 17 years experience in company management. I have various aspects of safety and public relations experience.

Electrical engineer with naval experience having expertise in the following areas: -Management of technical services, especially, for ships, aircrafts, heavy machinery -Training of technical personnel -Quality assurance -Technical training management

TO WORK IN AS A TOWN PLANNER / PROJECT MANAGER IN DEVELOPMENT AUTHORITIES, MUNICIPAL CORPORATIONS, INFRASTRUCTURE DEVELOPMENT AUTHORITIES etc.

To attain a position with an established civil engineering firm that can utilize the depth and breadth of my educational background to solve all the complexities of real-world situations.

Former Peace Corps Volunteer (Environmental Education - Kazakhstan), Geologist with an MBA in finance seeking position with an international organization in corporate planning, project management or finance.

Turkish / German Consultant with MSc degrees in 2 disciplines seeking new challenge

M.Sc in Sustainable energy systems, B.Sc in chemical and Process engineering

After graduating with a Bachelor of Science degree in Environment and Water Management from Magadh University, Bodh Gaya, India, I completed my Masters degree in Environmental Management from Guru Gobind Singh Indraprastha University, New Delhi during which I have acquired in depth knowledge and job

Over 25 years experience in International Security Management.

Project Controls, Cost and Planning

An information systems professionals posses around 4 years of experience in diversified industries such as manufacturing, mobile applications development and financials, hold the position of Sr. Business Analsy, Software QA Engineer and Functional Consultant, Masters degree holder in Computer Scienc

Done B.E in Bio Medical engineering and MBA in Marketing management. Work as a senior bio medical engineer, having work experience of four years.

Environmental geoscientist (hydrochemistry/hydrogeology) role

I am currently involved in writing site emergency plans and in the site COMAH application, carrying out risk assessments, Hazop studies, coshh assessments, site inspections, reports to management and accident investigation.

Training Specialist

Microwave and down level technician

I am a Chemical Engineer, with Masters Degree in Environmental Science. My employment history includes process engineer experience at aluminium smelter, and at pulp/paper mill. I have also worked for an environmental consultancy, and for a company developing environmental technologies.

An environmental engineering professional with 17 years of experience in the public and private sectors. Expertise in regulatory compliance and policy-making for environmental concerns. An excellent business and personnel manager who demonstrates superior communications skills.

First 1 2 3 4 5 [ 6 ] 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out