Resume - Training, education and experience in health, safety and the environment.

Misco Jobs

Resume #2731

CONTACT INFORMATION:
View contact information...

PROFESSIONAL EXPERIENCE

07/00 – 03/03 Schlumberger - Completion Systems Calgary, AB
Quality, Health, Safety and Environmental Manager

* To ensure manufacturing operations are conducted in a safe and efficient manner by integrating and implementing QHSE policies and procedures and to insure compliance with all Governmental requirements.
* To develop Managers' awareness and ensure QHSE is an integral part of Company Management responsibilities and objectives.
* To assist Management and Support Functions in:
- Establishing, maintaining, implementing and improving the Oilfield Services HSE Management System.
- Assessing the local risks and generating local Policies, standards and procedures.
- Setting up the controls required to verify and ensure proper implementation and maintaining of related records
- Conducting Management review meetings to assess the effectiveness of the QHSE Management System and identify required improvements.
* Investigate and report any accidents, unsafe acts or deviations from policies, procedures and standards. Generate Risk Profiles based on Risk Identification Reports.
* To co-ordinate and actively participate in the screening and training of all personnel, including subcontractors.
* To keep abreast of any new development or policy related to QHSE and inform management accordingly.
* Analyse incidents utilizing process improvement tools to come up with corrective actions for failure, accidents and audit RWP's.
* To advise Management on the compliance of the local HSE program with all local and national regulations of the host country.
* To participate in liaising with third party subcontractors, clients and local agencies regarding HSE.

06/98 – 06/00 Agra Earth and Environmental Calgary, AB
Account Manager

* Participate in liaising with third party subcontractors, clients and local agencies regarding Environmental Phase I, Phase II and reclamation project reports.
* Coordinate all report requirements and documentation for Client submission.
* Actively follow-up on related subjects and participate in Quality audits and investigations.
* Ensure that all relevant documentation is readily available and filed.
* Report all monthly accounting action and legal requirements to management and local agencies.
* Generated and submitted by-week/y and monthly operating costs, financial reports, invoices, Inventory control and reconciliation reports to AEE.
* Audited profit and loss statements and spend rate cost analysis.

06/95 – 06/98 Mount Royal College Calgary, AB
Digital Imaging Specialist

* Operated and provided preventative maintenance of high volume document printing systems.
* Provided desktop publishing, graphic design and digital construction of College Course packages and instructional material for a Print On Demand environment.
* Designed and compounded databases for mail distribution and direct mail system.
* Furnished cost estimates for collage course package materials
* Liaised with college bookstore, Instructors and departmental staff regarding production schedules, material content and copyright approval for course materials.
* Maintained and monitored college LAN and Novell network and optical network files.
* Supervised day and night shift reprographic operations and staff.

01/89 – 06/95 University of Calgary – Printing Services Calgary, AB
Assistant Manager

* Managed the daily operations and support staff of the Print Division & Copy Centre.
* Generated and submitted monthly operating costs, financial report, invoices, inventory control and reconciliation reports to the accounting department.
* Developed and managed the annual operating budget, copier lease contracts and equipment maintenance agreements.
* Contracted external suppliers and procured printing supplies for the campus departments and external clients.
* Provided cost estimates on printing and reprographic jobs for campus departments and external clients.
* Furnished desktop publishing, graphics design and prepress production for campus departments and external clients.
* Supervised day and night shift reprographic operations and staff.

EDUCATION

1981 Stranraer Academy High School Stranraer, Scotland
Grade 12

1985 Southern Alberta Institute Of Technology Calgary, AB
Engineering Drafting Technology

1998 Applied Multimedia Training Centre Calgary, AB
Multimedia Graphics and Design

2001 Mount Royal College Calgary, AB
Environmental Technology – Waste Management

ADDITIONAL H2S Alive Training, Professional Driving Instructor, Hazardous Material Instructor, Permit to work & Lockout/Tagout Fall Arrest, Confined Space, First Aid & CPR, WHMIS & TDG, Risk Management, Environmental Law, Audits and Investigations, Driving Monitor Administrator.

Member of Canadian Society of Safety Engineers.

REFERENCES

Available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 2452)

Go to Search Parameters...

Brief Description

Design eng. in solid works, ideas, and ug & b-tech in mechanical eng.

Application post for welder

Design Engineer 3 + Exp in Catia, Solid Works & Customization, Autodesk Inventor, Autocad 2007.

M.sc in marine science ,B.sc in Botany,IELTS-6 bands,dissertation in CSCRI (Central Salt And Marine Chemical research Institute,India )Indian passport holder. Available in Australia for 4 year.

Master degree in HydroScience and Engineering at Technische Universitaet Dresden, Germany. Bachelor degree in Biology at Universitas Padjadjaran, Indonesia. Versatilities in education and organization skills. Knowledgeable in Wastewater treatment, Stormwater in urban drainage, Flood Risk Management

To be a part of a progressive organization that gives scope to enhance my knowledge, skills and confidence to achieve my goals with the combination of honesty, sincerity and hard work

Welding all rod types: M.I.G., T.I.G, all plastics, oxyacertylene. Equipment repair and maintenance of all machinery for use in metal working shears, brakes, manual cutting, machine cutting. All machine shop equipment, lathers, radial arm, drill presses, and iron works.

A highly experienced professional with expertise in providing computer mapping using ESRI's products. Demonstrated ability in the data collection and data conversion of digital maps. Detail-oriented and results driven to achieve the overall goals of the company.

I have a MS and BS in Environmental Engineering with just under 1 year experience as engineering consultant. I am looking for a career related to energy supply, generation, and distribution.

Training, education and experience in health, safety and the environment.

I am a talented and hard-working individual, committed to the environment, seeking to gain experience in an environmental field.

Risk Assessment Studies, Safety and Environmental Audits, Environmental Management Plans, Environmental Impact Assessment Studies, Basic & Detailed Design and Engineering of Effluent Treatment Plants & Sewage Treatment Plants

Obtaining a position as an Electrical Engineer or Designer to utilize my strong technical, analytical and organizational skills.

COO - Director of Business Development - VP/General Manager

B.Sc. Natural and Health Science, B.Tech Environmental Health, Health, Safety and Environmental Management

Metallurgical engineer with diploma in mechanical engg. and graduate's diploma in computer application

Completed M.F.Sc with specialization in biotechnology , have good knowledge on fermentation technology, cell culture technology, algal technology, molecular biology

Graduated MSc cum laude in earth sciences. Project Manager with 51/2 years work experience with a multinational natural resource group and a leading consultancy with an eminent client list. Consultant in coordinating and writing environmental impact assessments (EIAs) and in environmental management

Skilled in Environmental Impact Assessment

14 yrs, in Refinery & Petrochem. Develop& management of cost-effective EHS Programs, Implementation of EMS, Wastewater Treatment, Hazardous Waste, Air Pollution Control Tech., prevention/minimization& recycle/reuse, Knowledge of national and international environmental regulations.

I am chemical engineer with 14 years experieced in corrsion inthe industrial water treatment, process units, coating, cathodic protection, and chemical injection.

Outstanding Engineer

I am an experienced research chemist specializing in analytical chemistry using chromatographic instrumentation for the analysis of petorleum, environmental and food samples

Groundwater sampling, indoor air, GIS, groundwater/contaminant transport modeling

Translator

Environmental Engineer looking for a full-time engineering position in the field of environmental, transportation or civil engineering, nationwide, willing to travel, will consider other engineering disciplines if training is available. Prefers jobs in a big metropolitan area, 2 weeks notice needed.

Highly motivated, team-oriented individual with excellent communication skills. Two years of industry experience with Turner Construction-USA & NESPAK-Pakistan respectively. Prepared budget reports, schedules, estimates and bill of quantities and performed engineering supervision of various trades.

At the present time I am working as an Environmental Engineer within the Semiconductor field. I manage the companies Hazardous Waste Management program and teach numerous health and safety training classes globally.

To obtain a civil/environmental engineering position with the opportunity for promotion to project management

Environmental Scientist, with experience in Water Quality. Willing to train for any position. Willing to travel Worldwide.

Meteorologist

I am a geologist with at 13 years experience in different fields of engineering geology. I have involved in different engineering geological and geotechnical studies of major infrastructures such as dams and tunnels. I am dynamic and motivative and wish to improve my knowledge in geotechnic

ERP Implementation, Business Process reengineering, Process Documentation

To secure a position with responsibility to apply my extensive programming and analytical skills in the field of software supplemented with my engineering background

Environmental Engineer/Scientist with over thirty years of experience with project and program management, industrial hygiene, hazardous waste and material management, modeling, monitoring, regulations, risk and technology assessment, pollution control, and environmental remediation

Doctor of Engineering, Department of Civil Engineering, Kyoto University, Japan.

Environmental Health & Sustainability (EHS) specialist with project management and consultancy experience in political and corporate environments. Keen ability to build internal/external consensus to implement projects, start to end. Effective communicator with

Obtain experience on Environmental Design and Environmental Health focused in Soil, Water and Air Quality Management and/or remediation.

Seeking a position in environmental engineering utilizing knowledge, skills and experience in water and wastewater treatment and design and waste management.

I'm a masters student in the department of Environmental Engineering, University of Missouri - Rolla, USA . I will be graduating in august 2004 and looking for an entry level environmental position. My resume give additional information regarding my background

Consultant Managment to give a support for selling the product.

BRIEF PROFESSIONAL SUMMARY 8 years professional experience in the Supply Chain functions namely Procurement, Logistics, Export-Import, and Materials & Warehouse management with Global Corporate Giants like Texas Instruments, Wipro, Godrej & Hindustan Lever.

seeking a position in the construction ,design and research field preferable in Water Resources projects in order to have more experience and to work globally, to be able to apply my professional interest in the field of Water Resources and Environmental Engineering.

im a computer programmer since 1990

Senior management consultant with 15+ years of progressive experience and with a results-driven approach for project and program management, including the use of first-rate skills in directing full cycles for high profile, multisite, international programs and initiatives.

Wastewater treatment, waste management, EIA

Senior Level Assignments in the realms of Procurement / Documentation with a reputed organisation

I am seeking for a job in Gulf contries especially community development field, and I have more than 3 years of experience in the community based water supply projects

16 years in Planning/Scheduling/Project Controls for Power/Waste Water/Mining & Metals/Oil, Gas and Petrochemicals projects from concept to commissioning, particularly in multinational, multi cultural and consortium environment in India, Indonesia, Saudi Arabia, USA, Singapore, Bahrain and Canada

I have Diploma in industrial safety ASNT LAVEL II RT UT 3. QMS ISO 9001-2000 Internal Auditor Course BY TUV India Pvt Ltd and having a nine years experince in construction civil as well as mechnical five years with thired party inspection agency

1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out