Resume - As a project manager, I have completed numerous phase I, II and III environmenta...

Misco Jobs

Resume #3070

CONTACT INFORMATION:
View contact information...

EDUCATION:

2000 B.Sc. in Earth Sciences
Memorial University of Newfoundland, St. John's, Newfoundland.

2001 Open Hole Engineering School
Computalog Ltd., Edmonton, Alberta.

WORK EXPERIENCE:

2002 – Present ARC Inc., Project Manager.

2002 Essis Ltd., Geophysical Technician.

2001 Computalog Ltd. (Open Hole), Field Engineer.

PROFESSIONAL EXPERIENCE:

MANAGEMENT OF CONTAMINATED SITES

PHASE I ENVIRONMENTAL SITE ASSESSMENTS / AUDITS

* Conducted Phase I environmental assessments of oilfield and commercial properties throughout Canada. The scope of work included a detailed historical search, air photo interpretation, identification of potential environmental impacts, associated environmental liabilities, and report writing. As a result of the Phase 1 assessment many intrusive assessments were undertaken.

* Conducted numerous Phase 1 environmental site audits for oil field acquisitions.

PHASE II ENVIRONMENTAL SITE ASSESSMENTS / SOIL AND GROUNDWATER MONITORING

* Acted as a project manager for numerous intrusive subsurface impact assessments of various operating and decommissioned oilfield facilities. Work included scheduling and organizing work activities, obtaining permits, and performing public relation duties.

* Prepared detailed project reports and recommended remedial options for contaminants such as hydrocarbons, salinity, and metals. The report preparation included review of aerial photographs and historical information, data analysis and interpretation and impact volume estimation.

* Supervised the removal of hydrocarbon impacted material from oil field lease sites, private, and public lands.

* Conducted numerous groundwater well surveying and monitoring programs at various oilfield facilities. Provided recommendations for the remediation of groundwater in problem areas. Alerted clients when hydrocarbon levels were suspect and provided guidance on where the hydrocarbon impacts may have originated.

* Water sampled wastewater lagoons in accordance with an AEP approval. Provided and implemented solutions for the client when approval parameters were not being met. Recommended numerous solutions for the prevention of future approval non-compliance occurrences.

GEOPHYSICAL SURVEYS

* Conducted numerous Electromagnetic (EM) / Global Positioning (GPS) surveys using a frequency domain GEM 300 multifrequency tool combined with a Trimble Pro XL GPS system with real-time differential data correction providing guidance and precise estimations of impacts for clients.

* Conducted numerous Electromagnetic (EM) / Global Positioning (GPS) surveys using a time domain EM31 and EM38 coupled with a Trimble Power GPS system with post processing differential data correction providing guidance and precise estimations of impacts for clients.

* Surveys were conducted on projects such as buried garbage dumps, saline impacted soil, produced water spills, archeological assessments, conductivity profiling and groundwater aquifer mapping.

* Conducted several direct push resistivity surveys delineating electromagnetic anomalies using a Geoprobe Direct Push AC injection resistivity system along with soil core sampling.

* Conducted a ground penetrating radar survey to map subsurface bedrock at a contaminated site. The eventual results were used to install a groundwater remediation system.

* Conducted a high density time lapsed electrical resistivity tomography (ERT) survey mapping the subsurface groundwater table in southern Alberta, Canada.

* Performed many Magnetometer-Gradiometer / GPS surveys using a GSM-19 v610 Overhouser Magnetometer-Gradiometer instrument combined with a Trimble Pro XL GPS system for sub-meter accuracy.

* Performed numerous topographical high-density Time Kinetic (RTK) and Differential GPS surveys utilizing a Trimble base station and rover to cover areas encompassing 100m2 to 2km2 in size.

HYDROGEOLOGICAL INVESTIGATIONS

* Conducted extensive hydrogeological studies to assess the availability and quality of groundwater resources for agricultural and industrial supply.

* Prepared budgets for domestic and industrial water well installations, and pump and slug tests.

* Conducted slug tests to assess aquifer hydraulic parameters.

UNDERGROUND STORAGE TANKS REMOVAL / MANAGEMENT

* Supervised the decommissioning and excavation of four 22,000L underground storage tanks formerly used for gasoline storage in south-western Alberta. Coordinated with contractors to supervise and monitor the purging of tank vapours. Collected and field screened selected soil samples for submission to the laboratory for analysis, and completed the required paperwork for the appropriate government agencies. Conducted the associated contaminated soil assessment and remediation.

RADIOLOGICAL SURVEYS

* Performed source surveys (while working for Computalog Ltd.) sampled radiological material using a Ludlum Model 44-6 sidewall G-M detector survey meter.

* Sampled radiation sources (used in the wireline industry) with a swab, submitted the swab and interpreted the results. Sampled instruments and other suspected radiological impacted areas with tape and submitted the samples for analysis.

PROFESSIONAL CERTIFICATIONS:

* Ground Disturbance Level II (ExxonMobil, Imperial Oil Resources, Husky Energy)
* H2S Alive
* Transportation of Dangerous Goods
* St. John's Ambulance Standard First Aid and CPR (Alberta / BritishColumbia)
* WHMIS
* CSTS

References available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1101 to 1150 of 2563)

Go to Search Parameters...

Brief Description

ASNT Level III, AWS SCWI, API 510, 570

Over thirty years of combined engineering and construction management experience involving supervision, design, contracting and construction, pre-award and post-award contract administration, change order and claim management, CPM Pert scheduling, cost, estimating, procurement and logistics of large

Welder, Mechanic with experience in transmissions, engines and hydraulics. Also experienced in portable line boring.

Safety Professional, 30 years experience construction, minin, environmental and hazmat

Bachelor Degree: Chemical Process Engineering

4 year Bachelor of Engineering Graduate Instrumentation Enginee,Automation Software Development for Three level Control System and Modeling the process for the purpose of control system design.

Qualification: B.E. (Mechanical), Diploma in International Trade. Skill: 14 Years Work experience in the field of Production, Planning & Control and Product Development

Execllent computer literacy,3d modeling via solidworks,autocad

My background is primarily Biology and Ecology driven. I have been an Environmental Investigator and have also worked for a very large environmental consulting firm outside of Chicago. I am currently working as an Environmental Scientist outside of Atlanta and looking to further my career.

I'm a Graduate in Bachelor of CIVIL ENGINEERING and acquainted with basic knowledge in Computers especially MS office, Project and CAD.Experienced in water supply networks and execution.

I am interested in a challenging position that will utilize my proven skills and knowledge in the environmental field and enhance my personal development.

Seeking a challenging and rewarding career in your Organization to pursue a growth oriented career in Environmental Studies.

As a project manager, I have completed numerous phase I, II and III environmental site assessments, geo-textile installations, geophysical surveys and large-scale groundwater remediation programs gaining extensive knowledge in numerical and analytical modelling techniques for solute transport.

Seeking career in wastewater field in Middle Eastern Country

To acquire a challenging full-time position utilizing the skills I have gained through my experience and education in Industrial and Systems Engineering.

A reliable, dedicated & commercially aware environmental manager/ecologist with extensive experience across the environmental & civil engineering industry.

I am looking for an opportunity to use my experience and education toward helping the environment. I am willing to travel and enjoy learning. Thank you for your consideration.

Environmental Specialist and Project Manager, with over 18 years of experience in the Infrastructure developkent projects.

NDT/QC UT Level III, prior RT/MT/PT/VT Level III. 25+ years experience in inspection in power, oiland gas and construction

Master's in Engineering and MBA + 28 years Global Multidiscipline Projects Engineering Management Experience

Chemical Engineer specialised in Environment Health & Safety (Facility Management)

CAD Manager for Microstation and AutoCAD

Operating all sizes and makes of excavators,dozers,backhoes,front end loaders,track loaders,scrappers,rollers,skidsters,mini hoes,bobcats,small blade,boom trucks,and hydro axe.Able to obtain all info. from blue prints and/or site plans.Capable of passing inspections foundation,building,and final.

Corrosion Control; AutoCAD drafting; Estimating; Material order; Microsoft Office; Mechanic and Architecture drafting;

10.5+ years experience EDP /ERP /IT Manager VB+SQL+ORACLE+FOXPRO

Machinist- licenced

Oracle PL/SQL Developer Certified Associate (OCA), Oracle Forms Developer Certified Professional (OCP), Relational Database Design

Received, inspected, inventoried, loaded, unloaded, segregated, stored, issued, delivered and turned-in organization and installation supplies and equipment

I am a mechanical engineering graduate, having experince in Design of under water pipe line Crossing (PE), Hydraulic design of Distribution Networks for 21 Villages using EPANET- 2.0 Software. Assisted for Report preparation of Hydraulic Calculations. AutoCAD2004

CAD CAM PLM TECHNICAL SUPPORT

c++,c,Core Java, Oracle, etc. 1+ yrs of Exp. in Software Development life Cycle.

Master's Degree in Telecommunications Management 3 and a half years of experience Configured Cisco devices Experience in analyzing end-user traffic QoS protocols Creative problem solving Bilingual (Spanish & English)

OBJECTIVE A challenging position in environmental engineering or hydrology that will allow me to use my analytical skills.

To work in a team environment on projects that would give me an opportunity to use the technical knowledge that I have acquired and that encourages collective thinking and learning.

Summarizes education and abilities.

Excellent writing ability. Independent research skills. Proactive. Motivated. Goal-Oriented.

To seek a firm that shall develop my leadership qualities further and make me a step closer towards becoming a total person. To further enhance my capabilities, expand my knowledge, apply my abilities, and improve my personality in an environmental firm

I am a brilliant and confident chemical Engineer with always in sight of practical aspects of Engineering. I am technically strong, but would like to have exposure at the Industry level. I promise that I would be a fast learner and an asset to the industry in the future

An accomplished Software Engineer specializing in Object-Oriented Design and Analysis with extensive experience in the full life cycle of the software design process including requirement definition, prototyping, proof of concept, design, interface implements, testing, and maintenance.

Research, Scientist, Chemist, Inorganic, Organic, Organometallic, Catalysis, Spectroscopy

Completed 1st Year MBA from SV University, Tirupati (Distance Mode) Pursuing 2nd Year MBA-HR.

Ph.D. in Metallurgy, Specialist in Surface Treatments, Project Management, International Experience etc.

Knowledge & exp. in Electrical and Instrumentation products, in PLC, SCADA and HMI systems, drives, field instruments, Allen Bradley - Micrologix, SLC, ControlLogix, Compact Logix, Flex Logix PLC’s, Panel View Panel view plus Families, in Controlnet, Devicenet, RSView32, RSView SE Redundant

Microcontroller Application, Interfaces Application - PLC (SCADAPACK,OMRON,GE Fanuc, etc), ADAM RTU,EXPERT Module,Flow Compute (OMNI,Sybertrol,AutoExec), Compact PLC (MOXA ioLogik)

Environmental Engineer, EIT, Good at Auto CAD,MS Office,HEC-HMS,S-PLUS

Certificated Asbestos Inspector

My Profesional Profile

To carve a niche for myself in the industry by working in a challenging position in the field of Electrical Engineering, which shall leverage my skills and bring value to my employer.

Massachusetts Maritime Academy student that is going to be graduating in December of 2003

B.Tech/MBA,Total 5 + years experience in Mechanical & Construction Sectors. Working as CONTRACTS ENGINEER (Planning/Estimate/Proposal/Qty’ Surveyor) in M/s CAPE EAST LIMITED CO (W.L.L), DOHA, QATAR.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [ 23 ] 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out