Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #31105 next resume »»
CONTACT INFORMATION:
View contact information...

Safety Specialist / Managing Director OHMCATS Pty Ltd
Grad Dip OHM, MSIA, RSP (Aust), MNSCA, AIMM, Trainer

OBJECTIVE
To continue in contract consultant style roles within the mining or oil and gas sectors utilising my "no fuss" management, strong leadership / mentoring style and excellent management skills, strong task orientation, extensive knowledge of OH&S related issues, well developed and varied mining / industrial experience and my strong research skills base.

SUMMARY
I am the Project Safety Health and Environment manager for Aker Kvaerner at the clean fuels project at the Shell refinery at Clyde (Parramatta) and the fabrication site in Newcastle.
This role encompasses all the normal HSE responsibilities.
The challenges of this project are:
- The required safety philosophy change of the fabrication plant personnel and management and:
- The modularisation of the plant equipment and the transport of those modules to each of the refineries, (Clyde and Geelong).
- The management of 4 contractor companies 2 of which have little or no experience on refinery sites.
- Geographically separated sites.
- I have 5 Safety advisors reporting to me over the two sites that I have responsibility for.
- Total personnel for both sites are approximately 320. (Exclusive of Geelong)
- Maximum weight of the heaviest module is 120 ton; there are 39, 18 of which are for Clyde.
- The combined cost of this project is approximately $170 million.
- The project is due for completion early December 2005.

I was the Project Safety Advisor to the Aker Kvaerner Asset Control Enhancement Project team assisting the team to complete the ACE project. (This role was ongoing from the previous role where I assisted the team on a part time basis while on loan from O& G Solutions).
The ACE project was completed Dec. 2004

I was the Lead Safety / Training coordinator to Oil and Gas Solutions, a member of the EPC alliance with Santos, (an amalgamated company of United KG and Aker Kvaerner), conducting their day-to-day operations, and the development of their in house Safety Management System.
As part of the above role I was the Project Safety coordinator and trainer for the incumbent Safety Advisor and his back-to-back Safety Advisor for the demolition and fire remediation team at the Santos Moomba oil and gas site.
The Highlight of the project is. No LTI's over 260k hours worked with a workforce of 250 plus at various times.

I also provided Project Safety Advice to an onsite Aker Kvaerner project management team who are at Moomba with a 50 strong team of instrument and electrical personnel working for 3 independent contract companies conducting the Asset Control Enhancement Project for Santos.

I was the lead Safety Coordinator for three other projects within the EPC alliance one of which is a Greenfield site near the Santos gas field of Ballera.
(This contract with O&G Solutions was completed end of July 2004.)

I have been employed on a contract basis for many companies within the mining industry, when I am not employed in this area; I operate as a consultant to various small to medium sized general industry companies in the South East Qld area as outlined later in this CV.

ADDITIONAL TASKS:
I am studying for my Master's Degree in applied science of OH&S through Greenwich University in the UK.

One individual has requested that I mentor them in their aspiration to become a Safety Professional. This individual is studying at Ballarat University. Their aim is to gain a safety related degree and attain full time employment.

Successfully Completed Duties Sites I Have Been Employed:

- Strong Project Safety Management skills,
- OH&S administration,
- Providing Professional OH&S advice to management, supervisors and other staff,
- OH&S related research,
- Coordinating safety related training,
- Development of safety, site specific training packages,
- Research, development and implementation of safety initiatives,
- Safety Management Plan development
- Safety Management System development or modification
- Safety Budget responsibility.
- Statistical analysis.
- Accident analysis,
- Management of Rehabilitation of Injured personnel,
- Providing direction concerning the purchase of Personal Protective Equipment
- Development and presentation of safety related Reports to management.
- Provide safety related guidance in the selection of on site contractors.
- Risk assessment facilitation,
- Standard Operating Procedure development.
- Conducted risk assessment training,
- Conducted Incident / Accident investigations,
- Conduct Gap analysis of safety management system,
- Supervision of site Paramedics,
- Supervision of safety advisors,
- Development of Computer based Training and Competency registers

A career path of over 20 years within the Royal Australian Air Force that has given me a solid grounding in the following areas:
- Administration,
- Personnel management,
- Occupational Health and Safety control,
- Trade knowledge and associated background experience,
- Logistics coordinator for the purchasing of all P.P.E. used within the RAAF,
- My roles have included providing management advice to purchasing personnel,
- Since my departure from the RAAF I have successfully managed my own OH&S consultancy.

STRENGTHS
- A desire to continue developing my skills base in the safety profession.
- I have a "no-fuss" management style that ensures tasks are performed efficiently and to a high standard,
- I am a task orientated individual with the ability to quickly assess a situation and make the hard decisions required to "get the job done",
- I possess Excellent organisational skills with a consultative communication style,
- I am an Extremely motivated, energetic individual with a tenacious attitude,
- I possess outstanding research skills and a well-developed network of contacts.
- I am a strong assertive negotiator with the ability to achieve the required result.
- I am an individual with the ability see what can be achieved using the philosophy of lateral thinking.
- I have a Strong computer skills base in Word, Excel, and PowerPoint.
- I am a strong trainer with a well-developed background to support my presentations.
- I possess strong Mentoring and encouragement skills,
- Development of Practical implementation strategies for improving safety on sites

EMPLOYMENT HISTORY:
OHMCaTS:
Own and manage
OHMCaTS PTY LTD: July 1998 Current

Safety Health and Environment manager for Aker Kvaerner for the Shell Clean fuels project at the
Clyde refinery and Newcastle fabrication plant Oct 04 Current

Safety / Training Coordinator to Aker Kvaerner on the Santos Moomba oil & gas Asset Control Enhancement
Project. July 04 Nov 04

Safety / Training Coordinator to Oil and Gas Solutions Jan 04 July 04
(United KG and Aker Kvaerner)
on the Santos Moomba oil gas project.

Contract OHS Consultant to Norcross Printing Pty Ltd Nov 03 Current

Contract for Yarrabee Coal Company Oct 03 Oct 03

Leighton's Contracting construction / mining company Jan 03 Oct 03

Boart Longyear Contract Drilling Division
At the Newmont Pajingo gold mine Oct 02 Oct02

MIM Newlands Underground, Open cut Coal Mine
And Coal Handling Preparation Plant Nov 01 Mar02

Thiess Foxleigh open cut coal mine Nov 01 Mar 02

Consolidated Rutile Limited (North Stradbroke Island)
(Part of the Iluka group) May 01- Sept 01

Specialist in Safety Management Systems development and implementation including:
Risk assessments,
Standard Operating Procedures
Hazard audits conducted, and many recommendations implemented by company management.

(Examples of industries worked in or consulted to)

- Oil & Gas Mechanical/ Construction/ Demolition
- Oil & gas Electrical / Instrumentation / Demolition
- Iron Ore mining
- Coal Mining
- Sand mining
- Quarrying,
- Drilling (Gold mining)
- Forestry and logging industry.
- Heavy diesel maintenance,
- Landscape supplies and transport,
- Hospitality,
- Sign writing,
- Printing,
- Shade sail manufacture and installation,
- Tool and die manufacturing,
- Conducted Induction training, OH&S awareness and Presentations of various reports and statistics.
- Wholesale nurseries.
- Motor vehicle repair

ROYAL AUSTRALIAN AIR FORCE April 1977- July 1997

INTERESTS: Walking, Swimming, Gardening,

EDUCATIONAL DETAILS:

1995 Graduate Diploma in Occupational Hazard Management
University Of Ballarat

1995 Six Thinking Hats. Concepts in Lateral Thinking
Edward De Bono

1997 Train the Trainer
Advanced Train the Trainer
Preparation for Training
Workplace Assessment
Reviewing and Promoting Training
Australian Institute of Management

1999 Accepted as a full member to SIA.
Safety Institute of Australia

2001 Accepted as a member of the NSCA
National Safety Council of Australia

2001 Accepted as a member of the AIM.
Australian Institute of Management

2002 Accepted as a Registered Safety Practitioner
Safety Institute of Australia

OTHER COURSES
Completed: 2004 Zero Incident Program, Sentis (Safety Psychology)
2004 S1 S2 S3 in Black Coal Mining Competency
2004 Qualified to train S1 S2 S3 Black Coal Competency.
2003 Generic Black Coal Induction
2004 Qualified to train Black Coal Induction
2003 Generic Construction Induction (Blue Card)
2004 Trained and Assessed as Competent in 4WD operations.
Roadsafe Aust / Western Pacific Training

1988 Logistics Assessor and Purchasing advisor
Royal Australian Air Force

1992 Quality Team Leader
Royal Australian Air Force

1992 Crisis Care Counselling
Royal Australian Air Force

1995 Quality Management Systems internal auditor
Royal Australian Air Force

REFERENCES: Names and contact details of referees can be provided upon request.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1201 to 1250 of 2397)Go to Search Parameters...
Brief Description
Electronic/ Mechanical Tech
Enthusiastic, approachable and highly motivated while enjoying working in a team or on an individual basis. Able to deal with unexpected situations and work under pressure in a committed manner. Good interpersonal skills and cooperative attitude.Specialised in Ocean Remote sensing.
ACADEMIC QUALIFICATION Designation : Bachelor of Engineer Trade : Environmental Engineer Aggregate : 70 % (3rd to 8th Semester) University : Visweshwaraiah Technological University, Karnataka Experience : one year
Environmental Engineer
branch=EEE fresher location=anywhere hard working
Chemical Engineer seeking internship/future employment
Systems Engineer, Catia, Solidworks, stress calulations
Mechanical Engineer, Project Engineer and Project Management Services
A highly educated and experienced project controls specialist looking for a position in project controls, planning and scheduling and cost estimating
I have a BSc degree in Chemical and Process Engineering.I do also have a Full Technician Certificate in Science and Laboratory Technology.Enough experience and extensive knowledge in quality analysis,pilot plant development and evaluation.
Cad Engineer
Water & Wastewater Specialist searching for a challenging position overseas.
Ten years experience in design, construction, water, wastewater treatment plants, buildings, roads, Certified in Occupational Health and Safety Canada, AutoCAD, B.E. Civil, and ME Environmental (Public Health) Engineering, Valid Ontario class G drivers license, Water Treatment Plant, Water Distri
safety and environmental protection
Java Servlets, JAVA, ASP, VB, ASP.NET, C#.NET, VB.NET,JSP, JavaScript, XML, AJAX,Oracle, MS SQL Server, MS Access ,IIS, Apache
Chemical Engineer, Project and Quality-Security-Environmental Management
MEng. In Mechanical Engineering,career as a Sales Executive Manager,Capable of using Microsoft Word, Excel, Power Point, also Enterprise Resources Planning SAP R3, Graphic software Adobe Photoshop, Auto CAD. communication,leadership,work in both team-oriented and self-directed environments
Qualified Electrician,with 15 years experience.
Experienced Health, Safety, Security, and Environmental Professional
Oil & Gas, Petrochemical Industry Specialist
Professional Contract Chef / EMR Available
SENIOR DESIGN DRFTSMAN / TEAM LEADER
Advanced British CITB scaffolder / Supervisor / Foreman-16 years exp
I AM HARDWORKER AND A QUICK LEARNER.
I am a Chemical Engineer, a (PE) Professional Engineer in Texas, (CSP) Certified Safety Professional and professional member of (ASSE) and (AICHE). Skills; Safety & Process Safety Management, auditing, incident investigation, risk analysis, training, behavior management
Key word : Power Plant Engineer, Boiler Operation Engineer, Boiler Maintenance Engineer, Turbine Operation Engineer, Turbine Maintenance Engineer,Field Service Engineer, Field Supervisor, Boiler Estimate Engineer, Boiler Shift Supervisor, Boiler Operator,Boiler Performance Engineer,Start up Engineer
Reliable, diligent and committed worker. Good team member.
Skilled computer Technician/Technical Support/Trainer Especially Windows Office Suite
I've been working as HSES Advisor more than 5 years in different oil& gas projects such as Offshore and Onshore Pipe laying operations,platform constructions, Flotel, diving operations etc.
I am currently working in an Offshore Vessel as an Electrician. I've worked experienced in Petro-Chemical Plant in Saudi & CHEVRON, Angola Africa as Maintenance Electrician. I am a Registered Master Electrician with PRC Licensed no. 0023265. I am currently looking for a job.
International Engineer and MBA.
mining foreman and operator: 11 years experience; Mine operator Certification; Miner's Safety Training Fire and Aide Crew; Emergency Medical Technician; Experience running hydraulic excavators, motor graders, bull dozers, front end loaders, electric shovels, etc...surface mining
Qualified and Certified NCCCO Operator with all endorsements willing to travel
I am looking for a job as Technical Manager/Supervisor for heavy machines worldwide
Currently in my 3rd year BCOM Degree
Paramedic with urban/rural/industrial experience.
Mechanical engineer from IIT Kharagpur
Safety officer - 3 years
Environmental Engineer/Scientist - 3 years + mining/industry experience
College education and master's degree in civil and environmental engineering within the research area of construction engineering and management
Technical manager of Construction & Services Companies - Manages all the company activities, adiministratives excluded.
DCS, ESD, SCADA design and commissioning, expertise in field instruments design and commissioning
Sr. PDS Piping Designer, Chemical, Petrochemical, Slurry esperience. Very strong in ALL elements of PDS including administration and support.
Knowledge of engineering theories and practices and an understanding of environmental principles involves with exploration, drilling, production and development operations.
Engineer have Bsc. in civil eng. & higher diploma in water polllution control eng. with experience of more than 5 years in Building & environemtal works
I have 12 years experience with working as a Diesel Fitter Mechanic, I am completly confident with working indepently or as part of a team. I have a certificate in HV mechanical & Electronic Systems, Maintenance and Repair.
Professionally qualified and highly experienced mechanical engineer offering 25 years experience in managing operations & maintenance of real estate properties (facilities management) and electro-mechanical projects.
Procurement / Logistic Supply Chain Consultant
Professional 15 years experience in geotech and geology with engineering consultancy and construction company with various responsible position.
17 years safety experience, Grad Dip OHM, MSIA, (RSP Australia), Trainer
1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   [ 25 ]   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48  
Seach Parameters

Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com