Resume - I am currently working in an Offshore Vessel as an Electrician. I've worked exp...

Misco Jobs

Resume #31198

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVES: To have a challenging, rewarding and promising job as an Electrician.

Work Status: Currently employed in an Offshore Vessel.

EMPLOYMENT HISTORY:
September 2006 to Present GPS Saipem ENI Group
(Platform & Pipe laying Offshore Project)
Saipem DLV (Derick/Lay Vessel)
Castoro Otto

Position: Electrician)

* Synchronizing Powered Diesel AC Generator with PLC control rated 4200 HP, 5.5 KV for Vessel Power Supply.
* Monitoring MW Meters (Active Power), Excitation Current, Stator Current, RPM, instrument temperatures & pressure sensors.
* Hands-on trouble shooting of AC Generators and maintenance of electrical controls and other equipments such as Steam Boiler, Evaporator, Air-compressors, Bilge pumps, Actuator valve magnetic sensor, Incinerator, Fire pumps, Fuel transfer pumps, Water feed pumps, Oil & Water Separator, etc.
* Calibration of Pressure Switches.

February 2004 – Present Al-SUWAIDI INDUSTRIAL SERVICES
Project assigned to Saudi Petrochemical Company
(SADAF/ SABIC)
Location: Jubail, Kingdom of Saudi Arabia
Position: (Electrical Technician)

* Hands-on trouble shooting and maintenance of electrical controls and its electrical equipments even on hazardous location such as Industrial motor AC/DC.
* Performed Preventive Maintenance with Lockout/Tag-out (LOTO) procedures on motor control panels. Including MCC's, Switchgears, Motor Starter Breakers, UPS batteries & its chargers. Subsystems lightings and other control panel boards.
* Assist Engineering Utility personnel during trouble shooting and preventive maintenance of medium and high voltages e.g. 4160 V & 13.8 KV especially during turn around or shutdown activities.
* Performed functional testing in coordination with Instrument Technicians.
* Performed calibration using a current injector on overload relays and contact resistances testing. Also using Surge Comparison Tester, Megger or Insulation Resistance Meter and Multi-tester.
* Experienced on Variable Frequency Drive (VFD), SCR, PLC installation, Power diesel Generator and Motorized Operated Valves (MOV).
* Performed other related duties that maybe assigned from time to time.

July 3, 2001 – August 21, 2002 URBANA 2000
Project: Chevron Texaco (Oil & Gas)
Location: Malongo, Cabinda, Angola Africa
Position: (Industrial Electrician)

* Perform scheduled maintenance (corrective & preventive) on electrical systems.
* Hands-on troubleshooting & repair of electrical equipments.
* Perform scheduled maintenance (corrective & preventive) on electrical systems.
* Perform disassembly, inspection, repair, reassembly, adjustment, testing and calibration of electrical equipment and systems in accordance with pertinent technical manuals, drawings, manufacturer's specifications and standards.
* Diagnose and troubleshoot electrical problems.
* Requisition of necessary spare parts, tools and materials.
* Maintenance of low, medium voltage switchgears and breakers and cathodic protection systems.
* Ensure that all protective and emergency systems are functional and that all tasks are performed in accordance with pertinent electrical safety standards.
* Compliance with Common Maintenance Strategy (CMS).

November 1998 – June 2001 JTL CONSTRUCTION
Project: House & Building Wiring Installation
Location: Philippines
Position: (Building Electrician)

* Lay electrical pipes, cable pulling, Threading/bending of pipes
Such as Emt, IMC and RSCP.
* Install power Panel board, Junction/utility box, pull box, isolator switch, breakers,
Convenience outlet, switches and service entrance.
* Wiring installation, cable pulling and splicing of power & lightings.

February 1997 – October 1998 METITO ARABIA INDUSTRIES, LTD.
Project: Water Treatment Plant & Sewage Treatment Plant.
Location: Kingdom of Saudi Arabia
Position: (Electrical Technician)

* Erection of sewage & water treatment plant (reverse osmosis)
* Lay power cable; install cable tray/gutter, threading/bending of pipes, wiring & Installation of main & local control panel boards.
* Install float level switches, control panel boards high pressures pump, aerator pump, control valves, membrane & ultra violet ozone machine.
* Erection of raw water tank & potable water tank
* Loading Media filters inside the tank with large gravel# 203, medium gravel#197 small gravel #193, course sand #210, fine sand #207 & carbon.
* Project commissioning
* Housekeeping after each work

August 1996 – January 1997 ENGINEERING EQUIPMENT, INC. (EEI)
Project: Servicing/Maintenance
Location: Philippines
Position: (Industrial Electrician)

* Repair/maintain electrical equipments such as AC Diesel Power
Generator Mobile, DC Welding Generator & Air-compressor
* Do preventive maintenance as per schedule
* Render technical service to the client.
* Do house keeping.

March 1995 – September 1996 WILSON CONSTRUCTION
Project: Building Wiring & Installation
Location: Philippines
Position: (Building Electrician)

* Lay electrical pipes, cable pulling, threading/bending of pipes such
As Emt, IMC & RSCP.
* Install power Panel board, junction/utility box, pull box, isolator switch, breakers, Convenience outlet, switches & service entrance.
* Wiring installation, cable pulling and splicing of power & lightings.

July 1993 - February 1995 RIYADH DISTRICT WATER &
Project: SEWAGE AUTHORITY
Riyadh Sewerage Operation & Maintenance
Location: Kingdom of Saudi Arabia, Riyadh
Position: (Plant Maintenance Electrician)

* Obtained work permit prior to commence the work.
* Perform maintenance works on different stations of sewerage plant which Includes troubleshooting/repair, disassemble/assemble of 3 phase motors & Wiring installation.
* Assist Senior Electrician in heavy repairs of High and low-voltage switch gear & Air circuit breakers for industrial application.
* Also assist in synchronization of large AC Generator rated 2 MW.
* Do housekeeping after each work.

January 1992 – May 1993 AL-THINAYAN EST. (K.S.A.)
Project: Maintenance & Servicing
Location: Al-Qassim, K.S.A.
Position: (Pivot/Electrical Technician)

* Erect & install Pivot irrigation system.
* Repair & trouble shoot Pivot irrigation system and its electrical control system.
* Render technical service to the company's clients.

December 1990-December 1991 NEWTON ENGINEERING CORP.,
Project Maintenance & Servicing
Location Novaliches, Quezon City
Position (QA/QC & Service Technician)

* Perform series of testing/Check-up of Ac/DC motors, generator &
Transformer subject for repairs & evaluation.
* Use surge comparison tester, Hipotronic, vibro tester, Galvanometer, Megger or Insulation resistance, multi tester, temperature monitor, tacho meter, growler & Polarity tester.
* Conduct no load testing, current check, temperature, etc., for final evaluation of newly repaired motors.
* Render technical service to the clients.

EDUCATIONAL ATTAINMENT:

ELEMENTARY Banlat Elementary School
Date Graduated 28 March 1977

HIGH SCHOOL Pasong Tamo High School
Date Graduated 26 March 1981

COLLEGE FEATI University
Date Graduated 27 March 1985
COURSE Associate in Electrical Engineering (A.E.E.)

TRAININGS & SEMINARS ATTENDED:

May 3-9, 1992 Technical Service Seminars
Sponsored and Conducted by Valmont Industries Inc. USA

July 3-6, 2000 Personal Safety and Social Responsibilities
Conducted by National Maritime Polytechnic

October 28, 2003 Fall Protection and Ladder Safety
Safety House V.V. Soliven, San Juan, Metro Manila

November 4, 2003 Control of Hazardous Energies
Safety House V.V. Soliven, San Juan, Metro Manila

November 5, 2003 Basic Electrical Safety
Safety House V.V. Soliven, San Juan, Metro Manila

November 19, 2003 Confined Space
Safety House V.V. Soliven, San Juan, Metro Manila

November 22, 2003
1) Fire Safety
2) Hazardous Communication
3) Advanced Chemical
4) Manufacturing Ergonomics
Safety House V.V. Soliven, San Juan, Metro Manila

March 19, 2004 Permit Work Receiver
Conducted by: Saudi Petrochemical Company
Jubail, Saudi Arabia

January 2005-April 2005 Reflexology Seminar (Scientific Massaging)
Conducted by: Mr. Ramon Garcia
Jubail, Saudi Arabia

CONTACT PERSON IN CASE OF EMERGENCY:
Upon request

CHARACTER REFERENCES:
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1401 to 1450 of 2562)

Go to Search Parameters...

Brief Description

My qualifications include City & Guilds Chemical Plant Operation, ONC & HNC Mechanical & Production Engineering. Refinery Operations/Commissioning/Planning/Inspection and Safety roles

degree in environmental sciences ,curntly employed as a ems co-ordinator, have previous experience in mining

Geologist Engineer: Abble to work as an exploration geologist, mining geologist, environmental geologist

I am currently working in an Offshore Vessel as an Electrician. I've worked experienced in Petro-Chemical Plant in Saudi & CHEVRON, Angola Africa as Maintenance Electrician. I am a Registered Master Electrician with PRC Licensed no. 0023265. I am currently looking for a job.

International Engineer and MBA.

Very experienced Welder, Pipe fitter, Foreman

mining foreman and operator: 11 years experience; Mine operator Certification; Miner's Safety Training Fire and Aide Crew; Emergency Medical Technician; Experience running hydraulic excavators, motor graders, bull dozers, front end loaders, electric shovels, etc...surface mining

College education and master's degree in civil and environmental engineering within the research area of construction engineering and management

Fifteen years experience in management, manufacturing and engineering with emphasis on quality assurance, environmental and safety.

Sr. PDS Piping Designer, Chemical, Petrochemical, Slurry esperience. Very strong in ALL elements of PDS including administration and support.

Knowledge of engineering theories and practices and an understanding of environmental principles involves with exploration, drilling, production and development operations.

Engineer have Bsc. in civil eng. & higher diploma in water polllution control eng. with experience of more than 5 years in Building & environemtal works

An M.Tech(Electronics) graduate with work experience in Industrial Automation, Embedded programming and teaching.Key skills include:SCADA, C, C++, Embedded C, VHDL, Verilog, MATLAB, Communication Protocols.At present, working for ABB India and has successfully completed a number of projects.

Microsoft Office, HRMS, Windows XP, Professional, other administrative softwares

Modeled and prepared detail engineering drawings for the projects executed interference checking and subsystems interfacing for the entire equipment.

Professionally qualified and highly experienced mechanical engineer offering 25 years experience in managing operations & maintenance of real estate properties (facilities management) and electro-mechanical projects.

Very flexible, Diverse experience. Looking for a place to excel.

17 years safety experience, Grad Dip OHM, MSIA, (RSP Australia), Trainer

Piping designer

Construction Management/Estimating/Supt/PM

Electrical engineer, Constraction, Control & Instrument, Coal, Oil & Gas projects,

Seeking Managerial or Supervisory position in Logistics & Transportation.

Chief Enineer, Limited, Oceans, Unlimited HP

Jamiu Badmos is a Registered Engineer cum HSE Professional with over 9yrs experience in QHSE & Project Management

23 Years of Various field of accounting

Director

I have been working in the Safety, Health and Environmental (SHE) field for more than 9 years. Throughout these years I have been exposed to various SHE related requirements and problems. One of my key competency area will be managing workplace day-to-day safety, health and environment issues and

I am seeking Medical Advisor/Occupational Health position to continue my occupational physician’s career with a multinational company.

Welder Fitter, with pressure certification (F3/F4 on 5G uphill progression -mild steel). Worked in fabricating shop on commercial and industrial products. Very proficient with GMAW and SMAW. Little experience with GTAW. Worked mostly mild still and some alloy. Little aluminum experience.

Title of qualification awarded Bachelor of Science in Physics Name and type of organisation providing education and training Universidade do Algarve, Faro, Portugal

A Degree in Business Admin and Management, skills and experience in secretariat and Administrative duties, have worked in an Oil and Gas company, 2 Construction Companies, good mastery of Micro Soft applications, excellent in both spoken and written English, with French and an additional Language.

Western IT and data networking expertise. Enterprise and Telecom experience. PMP holder

Journeyman Industrial Electrician , Apprentice Instrumentation Mechanic / PLC , DCS, HMI, SCADA . Underground / Surface, Oil and Gas, Mining

Handle preventive maintenance for the machine , servicing machine ,replace breakdown component /or equipment.

RSLogix 5000, PLC 5, SLC (Allen Bradley) Concept (Modicon, Quantum) Unity (Modicon, Quantum, M340, etc.) Setting up and commissioning of Advantys IO systems Rockwell, RSView Wonderware, Intouch

My areas of expertise are production, short-term planning and project management. I am a troubleshooter and leader that use influence to get things done

MSc Engineering / Business Development / Project Management /Energy fielsd

Environmental pre-construction surveys for wetlands, streams, and wildlife habitat; knowledge of wetland plants, soils, and delineation rules as well as general ecological knowledge. 10 years of experience on pipeline projects.

Fully qualified safety proffesional, with extensive experience in the construction industry, Rigging & Lifting Supervisor and Qualified Engineer please review CV for all qualifications & working background

ISO Implementation, Documents, Records, Archival Management, QA Manager, Writing Technical Documents, Auditor

I am currently Regional Safety Manager with Thiess John Holland in Melbourne Australia. I have extensive rail, mining and construction experience and have been involved in these industries for over 15 years. I have international experience, working with the Taiwan High speed rail project.

Achieve sustainable profit growth and customer happiness using technology to reduce costs and increase effectiveness of employee time.

Certified Safety Professional with over 20 years experience, in multiple industries, including oil and gas, medical, transportation, environmental and manufacturing.

Quality Control professional

Rotating & reciprocating equipment technician

Research Experience: Polymer solutions and adsorption behavior.

My Resume

System Administrator (Desktop/Windows support)

Looking for Instrumentation and controls job

I have 7 years experience of electrical installation onshore and offshore Oil / Gas Industry complemented with a 4-year recognized apprenticeship.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 [ 29 ] 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out