Resume - Senior Process Engineer with 13 years of Experience in Petrochemical and LNG pro...

Misco Jobs

Resume #36450

CONTACT INFORMATION:
View contact information...

Career Focus:

To work in leading organizations where I can use my skills and knowledge gained for the successful business of the organization and my career growth.

Resume Summary:

Experience as Process Engineer in Oil and Gas and Petrochemical plants.

Have worked in processes licensed by UOP, ORTLOFF, AIR PRODUCTS, MERICHEM, BP Chemicals and IFP.
Strong up-to-date knowledge of the process like sweetening, dehydration, NGL extraction, liquefaction, sulphur recovery and LPG treaters.

Experience in BP chemicals polyethylene process and IFP's alpha olefin process.

P&ID review and update. Heat and Mass balance calculations. Experience in simulation using HYSIS. Debottleneck study and technical reporting. Process Risk Assessment and HAZOP study.

Experience:

Process Engineering
* P&ID checking and updating.
* Knowledge of International codes and interpretation.
* Understanding the philosophy of process technology for capacity expansion and critical analysis of Process licensor's recommendation with a view of future operations as well as past experience of operation.
* Provide technical support for LNG trains and Gas plants.
* Have done Heat and Material balance calculations.
* Have done feasibility study for de-bottlenecking of the plant.
* Presented a technical report on the plant performance.
* Plan and execute High Rate Test of LNG plant for enhancing the capacity of the plant.
* Interact with process licensors for debottlenecking process constraints, plant visits.
* Tuning of various process parameters to conduct different trials of catalysts, additives etc and evaluation of the same considering overall impact.
* Initiate projects and provide technical support to enhance the capacity of the plant and to improve the reliability of the plant
* Written Standard Operating Procedures for Emergency handling and Operation of the individual units of the plant.
* Experience in HYSIS and have done simulation for pressure drop estimation, line sizing, equipment sizing.
* Prepare documents MOC (Management Of Change), to record changes in operating conditions and philosophies; conduct risk assessment for process and operations deviation so that the integrity of the plant is not affected.
* Expertise in PIS, LIMS, ATOMS, Process Surveillance Report.
* Have developed the skills of Acoustic Induced Vibration study and Vent dispersion study.

Process Plant Operation
* Experience in operation of Polyethylene plant with safety as the foremost priority to achieve the production targets that meets customer satisfaction and profitability of the organization.
* Have done planning and coordination of various maintenance groups to upkeep plant performance and minimize unplanned breakdowns so as to have a low cost of ownership.
* Experience in Honeywell TDC3000 DCS operation.
* Identification of process control requirement and implementation of new control philosophy and control language programming.
* Trouble shooting and rectification of existing Control Language program to accommodate new process requirements.
* Building of new tags, logic points and groups for operation and monitoring.
* Monitoring, analyzing and trouble shooting of sequences, process and system alarms.
* Subordinate development through proper training and guidance.
* I was a contributing member of the Six Sigma team in the project for improving the ON-Grade production during Grade changes.
* As a member of the Butene-1 revamp team I have done P&ID review and HAZOP study, Involved in pre-commissioning and commissioning activities and was responsible for stabilization and test run of the plant.
* As a member of the TIE-IN group of the project team in the LLDPE/HDPE expansion project with INNOVENE Technology I have done finalization of retrofitting tie-in points, checking of actual hook ups, preparation of check list, as-built checking of the plant, preparation of checklist for mechanical completion of plant and identification of various loops for pre-commissioning activity like line purging, sheet blasting, line flushing etc.

Skills:
* Excellent communication skills across the corporate hierarchy as well as across different functional groups.
* Have proven abilities to work in a group and as an individual as well as to lead the team inculcating the team spirit in the group.
* Create a culture of safety across all functional groups.
* Identify a problem, analyze, trouble shoot and find a solution to the root cause.

Present Employer:

PROJECO on behalf of
TECHNIP MIDDLE EAST
DOHA, QATAR
(Working on secondment with RASGAS, a LNG operating company)

Position: Senior Process Engineer

Responsibilities:
Provide technical support to LNG facility Operations to maintain safe and reliable operation.
Liaise with all engineering disciplines to identify and pursue opportunities through ATOMS (Asset Team Opportunity Management System) to enhance capacity and improve the reliability and integrity of the Asset.
Provide Stewardship for Management Of Change, closing of RCFA action items.
Present weekly and monthly updates to Asset management and the Team of Base Business Engineering studies, MOC status, RCFA status, ATOMS report.
Interact with process licensors and equipment vendors.

Pevious Employers:

1. CHIYODA CORPORATION
JAPAN
(FROM JUL'2006 TO DEC'2006)
Position: Process Engineer
Responsibilities: As a member of the LNG project engineering team was actively involved in the HAZOP, mark up of nodes, preparation of HAZOP report, coordinating with discipline engineers for closeout of HAZOP action items.

2. INDIAN PETROCHEMICALS CORPORATION LIMITED
Maharashtra Gas Cracker Complex
Nagothane, Raigad
Maharashtra, India
(from sep'1995 to jun'2006)
Position: Manager
Responsibilities: Responsible for successful execution of de-bottlenecking project. Maintain safe and reliable operation. Subordinate training and development.

3. NEYVELI LIGNITE CORPORATION LIMITED
Neyveli, Tamilnadu, India
(FROM APR'1995 TO SEP'1995)
Position: Graduate Engineer Trainee
Responsibilities: Under the guidance of the plant manager took training in the Briquetting and Carbonisation section.

Education:

Degree/Certificate University/Board Year of passing Grade

Bachelor of Technology (Chemical) Regional Engineering 1994 I
College Tiruchirappalli, India.

Energy Manager Bureau of Energy Efficiency, India 2005

Energy Auditor Bureau of Energy Efficiency, India 2007

Notable Technical Trainings Received:

Control system US/AMC Implementation training by Tata Honeywell, Pune
Energy conservation Pinch Technology
Process safety Hazop Workshop by Tata AIG
Risk Assessment Risk assessment – Level 2 training by Exxon Mobil

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1951 to 2000 of 2396)

Go to Search Parameters...

Brief Description

Ex Firefighter 18 years, Breathing Apparatus, Confined Spaces, Fully Qualified Pllease view my CV

Master Mariner, Class 1: Graduate doing MBA: Employed as Planning Manager with a Container Company

HR Professional seeking Middle / Senior Management Position

International Trade such as Import & Export Business, Offers, Sales Promotion, Market Research, Different Business Reports / Information's, Estimations and Future Business Plans beside some Administrative Work etc

To secure a full time Mechanical Engineering position in which I will utilize my technical and interpersonal skills to further the company and myself.

young and energetic graduate with professional experience in Land Surveying

I am a Civil Engineering Graduate from NED University, Karachi, Pakistan and hold a Master's degree in Environmental Engineering from USA. I have extensive professional consulting experience spanning over 10 years of EHS management and controls, involving Due Diligence reviews and audits, Environme

PLC, HMI, C/C++, PHP, JAVA, mySQL, microcontroller, Embedded, Firmware,DSP

I am doing Masters Graduation from Anna University, Chennai India and is eager for a position from which I will gain valuable experience in the industry. I will finish the course by April 30th

Excellent Pro-E skills for product and mechanical design in lean manufacturing

CMIOSH - Sr. Industrial Hygienist : Expertise in writing & implementing OH Procedures, conducting HSE Training, Inspection, Audits, Risk & Industrial hygiene Exposure Assessment & Monitoring etc. Able to work with little guidance, hold good inter-personal relations & transparent communication skill.

Fire Prevention, Job Safety Analysis, Hazard Analysis, TOR,

A geophysical graduate with 8 years marine survey experience, coupled to business, project and people management skills. Currently working for an international consultancy, integrating geophysical and geotechnical surveys into engineering projects worldwide.

CAT parts logistics supervisor with five years experience in supply chain management and 8 years experience in Multinational organizations. I hold a bachelor degree in Commerce, political science, commercial representation certificate from the ministry of foreign trade & a certified Java programmer.

Corporate Finance, Program Management, Management Consulting, Audit, Accounting, Business advisory services

Projects Management / Technology Consultant / Business Development & Management of Information Systems

Having Cement and Pharma R&D Experiences, I would like aquire a career in the same feild. My Skills includes that,I can work with part of team or indepentantelly. Fast decision making, analytical skill.

Possess a background in Security including BS Justice Studies, US Military, Federal Law Enforcement, and Int'l Security Mgmt experience.

My background is varied in both in education and 'hands on'. I currently hold a B.S. in Natural Science and an A.S. in Electronics, In the areas of 'hands on', my background includes but is not limited to maintenance on various types of equipment.

Have international experience in project planning/scheduling, cost estimating/control, and project procurement.Hold advanced education and research background in project management and international construction management, and proficient knowledge and skills in applying P3, PRISM, and CONVERO.

Specialist in Security, Safety and Risk management

I have completed Masters degree in Geological Sciences from Jahangirnagar University, Bangladesh in 2002. I am citizen of Bangladesh. Now I working as an Assistant Manager(Training) in Gas Transmission Company Limited in Gas sector of Bangladesh Government. But as a background of Geological sciences

HSE ENGINEER

With a Chemical Engineering degree and 5 years experience in Oil & Gas, Water Treatment, Quality Control and Project Management, I possess strong analytical, quantitative, communication, management and problem–solving skills. My initial objective is to build on these skills, gaining full chartered

I am keen to be considered for Graduate Mechanical Engineer, I have recently completed a Masters in Mechanical Engineering at University of South Australia. I have seven months experience worked for Praga Tools Ltd, India, as a Junior Production Engineer,

I am currently working with the National Environment Agency as an operation engineer in an incineration plant. Had obtain Degree in Electrical Engineering, and is a Australian PR

Senior Process Engineer with 13 years of Experience in Petrochemical and LNG process

First Aid Attendant and Field Supervisor Familiar with drilling rig and service rig operations. Able to do minor mechanical, plumbing and electrical work. Have some hours experience on a variety of machinery. Have proven abilities in first aid. Have proven leadership skills.

Specialist in Telecom looking for a job in CIS

CMA (USA), ACIA (USA), ACMA.Internal/ext audit,budgeting and forecasting, project execution and evaluation, financial reporting,Accounts finalization (IFRS & US GAAP), Financial Analysis, Control self assessment, ERP implementation & dealing for financial arrangement.ERP SAP/Spiridon/Atlantis

To obtain a 2nd class welder/boilermaker position that utilises my vast experience as a welder and my experience with steel fabrication.]

HSE Mechanical Engineer. Quality, Safety and Environmental issues skills.

EPC/EPL Manager, Rehab & startup projects. Polished broad based o/seas tech & mgmt skills

Professional with Ten years of total work experience out of which Seven years in cost estimating, cost control, and project management. Proven record of success analyzing all aspects of a project or area of responsibility, project scheduling investigating and improving efficiencies of operations.

Diverse background in construction, logistics, remote location activity that can be used to meet your company's immediate and long-term needs. 15 years of increasing responsibilities in the construction industry. Multiple job responsibilities including blueprint reading and project layout.

SALES PROFESSIONAL with an impressive record of top performance and the proven ability to achieve solid sales growth….to effectively capitalize on both new and existing market opportunities

HSE Advisor with 10 years international QHSE work experience (Oil Industry)

Certified security supervisors trainer from SITO. Certified courses on Fire fighting, First Aid and different courses on security operations.

To obtain a position in computer science/computer information systems field, telecommunications field and as well as in any other business field where I will be able to develop my skills.

I am a experienced safety coordinator, I am a (CSO) national construciton safety officer and have completed the UofA Occupational Health & Safety Program.

Operations engineer on aviation refuelling operations, design and maintenance management in the airport depots, quality assurance manager on SHE issues, supply management for aviation fuels

Expertise in handling instrumentation systems like Inlet Gas Metering Systems, ABB & DANIEL Gas Chromatographs, Analyser Management and Data Acquisition Systems, Process Gas Analysers, Process Monitoring Field Instruments and Custody Transfer Equipment. with proven abilities in reducing downtime.

With over 14 years experience in Camp and Catering Management and a long practice of difficult countries ( Nigeria, Angola, Myanmar(ex Burma), Iran, Algeria, Kosovo, and Afghanistan), I believe I could make a significant contribution in helping The Company achieve its goals and objectives..

Experience of greenfield project, Production of iron ore and diamonds. Mine planning. Implementation of ISO-14001. Safety management. Management as well as Supervision of all mining activities viz. drilling, excavation, haulage, dozing, grading etc. Quality control and management

I am Vaka Vasavi, at the verge of finishing my Masters in GIS at UT Dallas. Currently working on my Master Project which will conclude my course work at UTD, at the same time I am looking for an internship/Fulltime position in a organization which would benefit from my GIS knowledge, skills and

Free! I am very interested in a career in economic geology. Available for Willing to relocate both domestically and internationally. Available to work immediately. Over three months experience in Alaska doing geologic mapping/sampling for major gold mining company (summer 2008).

Humility, Availability, dynamism, versatility and team spirit are my main assets

Geologist, Environmental management, Geophysics, Geochemistry

A Senior Inspector with more than 20 years extensive offshore/onshore activity in the Oil, Gas, Petrochemical and Nuclear Industries

MECHANICAL ENGINEER HAVE MORE THAN 9 YEARS EXPERIENCE WITH WITH RANGE OF EQUIPMENTS . IN MY RECENT JOB, I AM RESPONSIBLE ABOUT SCHEDULING AND PERFORMING TH PREVENTIVE AND CORRECTIVE MAINTENANCE OF TWO VESSELS AND OIL POLLUTION CONTROL EQUIPMENTS .

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [ 40 ] 41 42 43 44 45 46 47 48

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out