Resume - Experienced Industrial Structural Engineer - concrete, steel

Misco Jobs

Resume #39153

CONTACT INFORMATION:
View contact information...

SPECIALISATION
Industrial Concrete & Steel Structural analysis & design, foundations, concrete rehabilitation, explosion venting
Countries willing to work - Open

LANGUAGES English, Gujrati, Urdu, some Arabic

SKILLS
Civil Engineering: Analysis, design, construction and repair of reinforced concrete and steel structures.
Computers: Fluency in AutoCAD 2002, STAAD Pro, Mathcad, SAFE, MS Office, MS Project, Programming experience in dBase, Excel, developed several analysis & design aid modules.

EDUCATIONAL AND PROFESSIONAL STATUS
- B.Sc. (Hons) Civil Engineering, 1982: University of Aston, Birmingham, UK
- PE (Wisconsin, USA). Accredited: CCPE, Ottawa, Canada
- Professional Engineer, Pakistan Engineering Council
- Past Member, Instt. of Civil Engineers, UK.

EXPERIENCE RECORD
Aug '01 – present Sargent & Lundy LLC – Consulting Engineers, Chicago IL
Senior Structural Engineer, Fossil Fuel & Nuclear Power
Power Station structural design, inspections: retrofit to coal-fired to reduce NOx emissions:
- Marion (IL) Units 4,5&6: re-designed piled foundations SCR reactor supports to eliminate costly shear walls.
- Coffeen (IN): Retrofit for new air intake ducts, check & modify in-place steel for duct bumpers and supports, new truss retrofit for ash pipe.
- Gibson (IN) Units 2,3,4&5: New SCR units retrofit to existing station - achieved significant cost savings for Client thru critical structural analysis of existing structure.
- Poletti, (NY) 500 MW CCPP: principal design reviewer for civil / structural works, including construction support. Reviewed and altered numerous design and construction issues, achieved very few issues during support phase.
- Tennessee Valley Authority at Benton & Lowndes (TN): transmission substation structures & foundations - developed degree of automation & "off-the-shelf approach", for design cost savings.
- Marion (IL) inspection of corrugated steel circulating water lines, report & recommended shotcrete lining.
- Bellingham (MA): Assessment of crane girder built to defective calculations - satisfied client of girder safety.
- Dallman (IN): inspection of main air inlet ducts from ID fans to chimney.
- Sioux (IN): preliminary piling layout, achieved efficient layout despite headroom constrains
- Edwards (IL): designed explosion relief siding & blast protection for occupied areas
- Monticello (MN): nuclear power plant, evaluated cores thru reactor building.
- Fort Calhoun (NE): nuclear power plant, modifications for 100 Ton condenser tube bundle replacement & Turbine Building crane upgrade
- Baldwin (IL): rigging beams for HRH Pipe replacement,
- Vermilion (IL) - explosion venting, brick wall protection

Sept '88 – May '00 MOTT MACDONALD GROUP – Consulting Engineers (Incorporating Ewbank Preece Limited)
Resident structural engineer & incharge of CAD (Drafting) section:
Concept, design and detailing of:
- Desalination & power generation plant foundations and process / control buildings at 6 sites for U.A.E. Ministry of Electricity & Water.
- Pipe rack support systems for Oil Company, fuel tank bases, gantries
- Manholes, pits, trenches & culverts (single, 2-bore & 4-bore, and stop logs)
- Thrust blocks & valve chambers for buried pipelines
- Telecom company high-rise flagship buildings in Abu Dhabi, Sharjah and Al Ain
- Chicago Beach Hotel periphery buildings (pre-cast concrete)
- General foundations for petrochemical plant (skids & ancillaries)
- Flare & chimney foundations
- 33 kV & 11 kV overhead electricity transmission line poles including foundation using kicker poles
- Substation buildings (220 – 33 kV)
- Precast flooring for Duty Free Warehouse and GSE Complex at Dubai International Airport

Design & site supervision of:
- Telecom tower piled foundations & structure – approx 50 sites
- Gas Turbine installations (3 sites)
- Fuel storage tanks ; shell & ring foundations
- Telecom switchgear buildings (6 sites)

Design checks for:
- Telecom towers, masts & monopoles: upto 200m, over 150 sites, check for structure & foundations
(piles, pads & rafts)
- Overhead Transmission Line tower foundations for various Govt. projects.
- Flare installation technique

Structural concrete surveys & special projects:
- Crack investigations and delamination mappings of trenches, foundations, slabs, etc. Concrete deterioration survey involving potential surveys, dust & core sampling
- Site supervision of remedial works including skin repairs, surface improvement techniques and cost-control., structural analysis of cracked concrete sections for tanks at petroleum installations, control building, exhaust stack foundation.
- Site survey & "As-built" drawings for Aluminium smelter expansion, new Flour Mill, recreation club, Sea Port expansion
- Special investigation for tower failure – testing, analysis & report
- Damage investigation for culvert due to accidental loads, developed computer model of incident.

Sept '88 – May '00 (additional freelance work)
Engineering support: design & detailing of hotel, pre-cast units, bar bending schedules, sub-frame design, foundations. Produced drawings for fire-fighting systems, drainage, plumbing & HVAC layouts.
Production & alteration of drawings for road alignments, interchanges, and housing development layouts.

Oct 87 - Sep 88 ELECTRICAL ENGINEERING CENTRE, Doha, Qatar: Consulting Engineers
Drawing & document production related to electrical contracting works involving electrical cable laying & HV / LV panels.

Jan 85 - Sep 87 ALI ZAIN CONSTRUCTION, Karachi, Pakistan: Civil Contractors
Site Engineer - site supervision for steel re-rolling mill project (steel portal & rc machine foundations),
Motor showroom (rc flat-slab), and 65 low-cost housing units. Responsible for all aspects of construction,
Cost control and sub-contractor payments.

Sep 84 - Dec 84 DESIGN CENTRE, Karachi, Pakistan
Structural Designer - designing and drafting of R.C. structures including mosques, office buildings and shopping centres.

Jun 83 - Aug 84 (Freelance Engineer), Telford, U.K.
Surveying, setting out and supervision of various residential and commercial building sites.

Aug 82 - Jun 83 & Apr 81 – Sep 81 MCPHILLIPS LTD., Telford, UK, Civil Contractors
Junior Site Engineer: Setting out, surveying, site management of road, pipeline, earthmoving.

Apr 80 - Sep 80 JEC FAREBROTHER & PARTNERS, Birmingham UK, Consulting Engineers
Apr 79 - Sep 79 (University Sandwich Course Work Experience)
Junior Design Engineer: design & detailing of R.C. and steelwork structures. Site supervision work.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 2563)

Go to Search Parameters...

Brief Description

Free! Bosun experience -aboard an ammunitions ship ,underway replenishment tanker in support of the Irag war - 2002 2003. Navy Bosun’s Mate - refrigerated stores ship - fleet oiler 4 years.

Wide range of administrative and management experience in Utility and Manufacturing sectors. Strong analytical capabilities and an interest in developing people and ideas to their fullest potential.

I am a 31 years old Tanzanian Lady holding a Masters of Engineering in Environmental Science and Technology from IHE-Delft , Netherlands. I am now employed by The National Environment Management Councils a Senior environmental mangement Officer

I am looking for a construction management job.

* Seven years concentrated consulting experience * One project was awarded the Grade II "Excellent Designing" by the Construction Ministry of China

Double French/Argentine Nationality Entry Level Environmental Engineer, fluent in Spanish and English languages, willing to relocate world wide. EIA preparation, ISO 14000, Environmental Management & Consulting, Bio diesel technology, etc.

OBJECTIVE Seeking a position with a consulting company as a consultant to utilize a wide background of environmental projects, experiences, and a strong background in computers.

A highly experienced Registered Environmental Professional, with extensive knowledge of compliance for Environmental, Health and Safety policies and procedures.

I am currently exploring possible options for employment as a geologist, hydrogeologist or environmental scientist. I am looking to broaden and enhance my skills, to include work in or soil & groundwater assessment and subsurface investigation and watershed analysis and development.

My goal is to pursue a career in the geomatics industry where I can apply my skills to effectively communicate and present results through software customization, database management and maintenance, data analysis as well as continuing to learn new GIS principles and techniques.

HSE Manger

I believe that I have necessary background and experience to work on wildlife and protected area management, as well as Environmental Impact Assesment projects.

PhD, CFD, Fortran, Matlab, C++, Fluent, Gambit, Tecplot, AutoCAD, ArcGIS

Chem Analyst - Laboratory Technician

CA licensed geologist (CEG&RG). More than 24 years of professional experience in engineering geology and environmental consulting in CA & HI, including 16 years as supervisor/owner. Currently self-employed with own environmental consulting firm in HI since 1992. Relocating to AZ (Tucson or Phoenix)

Ability to work in team with high collaboration Capable of achieving personal objectives as demonstrated by successful completion of my degree Excellent analytical and problem-solving skills Extensive experience with public conference and presentation. Good knowledge in radiation protection

Experienced in autocad ,microstation and manual drafting. 32 years in civil and structural design

Mining Shaft Supervisor, Equipment Operator, Maintenance Supervisor

Over five years of Mechanical Engineering experience in various organizations in US. * Highly proficient in development, design and analysis of Energy systems like Industrial Gas Turbine, Aero derivative Gas turbines, Fuel Cell Systems.

MA(ECONOMICS), PGDCA, HEALTH & SAFETY MANAGEMENT DIPLOMA, FIRE AND SAFETY MANAGEMENT DIPLOMA, FIRST AID DIPLOMA, CONSTRUCTION SAFETY CERTIFICATE, COSHH CERTIFICATE, SAFETY MANAGEMENT CERTIFICATE, OHSAS-18001-1999 HEALTH AND SAFETY INTERNAL AUDIT, ENVIRONMENT AWARENESS CERTIFICATE, MANUAL HANDLING CE

Civil Engineer expert in computer and water sector

More Than five years of professional experience in: Analyzing Business requirements. Usage of ArcGIS, ArcIMS, ArcSDE, ArcXML and ESRI based products.

See below

Experience in stream assessment, macrobenthic ID, wetland delineation, Section 401/404 permitting, NEPA and SEPA, protected species. formal training in wetland delineation, extensive field experience, in Texas, North and South Carolina, Virginia, and Venezuela.

M.Sc. Applied Environmental Science B.Sc. Geology Houours Expertise: Waste Management, EU Environmental Legislation, Environmental Impact Assessment, Ecology, Communications, Project Management

Former GS 15, U.S. Government Contract Officer (KO) & Administrative Contract Officer (ACO)¡Xcurrent Senior Level Professional seeking a Project/Program Management and or Business Development opportunity

I am working in RALLIS INDIA LIMITED for 10 years in SAP SD ERP .

Qualification: B. Sc. Hons Biotechnology

Summary of Qualifications,Combined experience in Industrial Refrigeration Technician / Electrician Technician in the Pharmaceutical Industry,Petro chemistry, Building Management System (BMS), Ship Systems, Maintenance and Troubleshooting.

I have exp. 16 months as fire&safty supervisor, 18 months as a electrical technician

Fifty Years Total Experience in process engineering and technology development. Including More Than Twenty Years Process Engineering Experience on petroleum refinery, oil & gas production and petrochemical projects. Experience includes process simulation software Hysys/Pro II/Dynsim/Aspen.

Petroleum Geologist with 20 years international experience

Pro/ENGINEER, AutoCAD, SAS, Microsoft Office, MSC NASTRAN

A Mechanical Engineer with over 11 years of proven functional experience and can perform various roles in Manufacturing, Programming ,Design and Materials Procurement / Material Management.

I am the head of the laboratory at the moment. I have been working in the metrology field for 6 years and I deal with the following: preparation of gas mixtures by gravimetric and dynamic methods, gas analysis on GC, NDIR, FTIR and others. As the head of the lab I deal with clients.

Doctorate in Science, Ecotoxicology, marine pollution, Enzymes, Biomarker, biomonitoring of pollution,

LOOKING FOR A CHEMIST AND/OR ENVIRONMENTAL POSITION THAT ALLOWS ME TO APPLY MY 9 YEARS OF EXPERIENCE AND EDUCATION IN CHEMISTRY.

Fourteen years of experience in Office Administration, Procurement, HRD, Public Relation and Sales Coordination has energized me to seek suitable position in renowned companies. My quest is to further broaden my horizons so as to facilitate better opportunities to serve &better objective to achieve

Experienced Industrial Structural Engineer - concrete, steel - 20+ years, UK & US codes

Exceptional performance as a Senior Process and Production Engineer for major industrial, polymer, refining, and specialty chemical manufacturing companies on the Texas Gulf Coast.

Over 11 years of SAP BW BI experience as a developer, Lead and Manager

Diploma In Mechancial Engineering+NEBOSH Level-3+Environment, Health and Safety Management Specialist Certification from NASP of USA+ ISO 14001:2004 & 9000:2000 Certified Lead Auditor with 15 Years Experience in Oil&Gas as HSE Advisor/Engineer/Supervisor/Coordinator/

Wetland Studies, Wildlife Research, Environmental Assessment, Endangered Species Survey

Natural resource managment student , skils range and land surveying , to environmental impact assessments to water quality testing. Also a qualified sailing instructor and first aider with a clean driving licence and eight years endorcment free

To obtain gainful employment in the Software Engineering field with an organization that will benefit from my knowledge and experience.

Seeking a challenging position in Environmental Engineering field, Environmental safety and Health, Environmental Quality Monitoring, Water and Waste Water projects where I can apply the knowledge that I have learned and gained practical experience and serve the organization.

Strengths in project management, problem solving, team leadership, instrumental analysis, laboratory techniques, analysis data, research proposals, design interactive website, poster, oral presentation, Stella computer modelling, Outlook, MS Office Suite, Adobe Photoshop, and Fusion.

I have: . Master's Degree in Geology . 4 years research experience . 2 years teaching experience . An impressive career of field works including mapping . Efficiency in sampling of rock and soil from outdoors . Extensive training and experience in laboratory.

A graduate of University of Port Harcourt, Faculty of Science, Department Of Geology (Bs.c Geology) Rivers State, Nigeria. Working currently as a contract staff with Shell Petroleum Development Company Nigeria Ltd.

Recent college graduate with experience in environmental education, natural resource conservation, advocacy and consulting work.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out