Resume - NDT/QC UT Level III, prior RT/MT/PT/VT Level III. 25+ years experience in inspec...

Misco Jobs

Resume #42782

CONTACT INFORMATION:
View contact information...

OBJECTIVE
To secure long-term, permanent or contract employment where I can best utilize my skills and experience in providing a finished quality product utilizing appropriate engineering practices and inspection techniques.

Zachry International
Beijing China NEC

10/23/2005-Present
QC/Welding Inspector responsible for welding Quality Control on the new US Embassy project in Beijing, China. Monitor welding activities, perform UT/MT/PT and VT inspection of all structural and pipe welding, perform civil and mechanical inspections. Top Secret security clearance.

WESDYNE
Madison, PA

6/23/2003-10/16/2005
Senior NDE Specialist performing NDE inspections and examinations on rotating and pressure retaining equipment in accordance with company standards, customer specifications and ASME Section IX requirements. Have completed training and assignments utilizing RD Tech phased array, Paragon data acquisition, Intraspect single axis data acquisition and manual applications of NDE methods. Recently completed an assignment in China supervising the RT examination of RPV safe end nozzle weld replacement. Certified to LIII in RT, LII in UT/MT/PT/VT (all company certifications).

Scientech Corporation
New Milford, CT

01/03-04/03
NDE Level III (RT/MT/PT/VT) assigned to Calvert Cliffs Nuclear to perform NDE QA oversight on the NDE contractor for the Steam Generator replacement project. This included procedure and certification package review, monitoring for procedure compliance and review of final reports, including radiographic film review and acceptance.

ONDEO-Degremont, Inc
Richmond, VA

8/99-8/02 (RIF)
Senior Quality Control Inspector with responsibility for performing source and qualification inspections at vendor facilities to monitor and/or approve fabrication of manufactured and welded mechanical equipment such as pump skids, tanks, structural assemblies and piping. Verify vendor fabrication in accordance with drawings and owner specifications. Perform field inspections when requested by owners. Review contract/engineering specifications and prepare inspection and test plans based on specifications, monitor and approve nondestructive and hydrostatic tests, when required.

Granite Professional & Technical Services/GEIS
Richmond, VA

10/96-7/99
Inspector/Technician (full-time) assigned to provide Nondestructive Testing/Inspection services on projects located throughout the world. Performed Ultrasonic/Magnetic Particle/Liquid Penetrant/ Visual/ CWI and API inspections on a wide array of equipment, including but not limited to rotating and stationary equipment, turbines, pressure vessels, tanks and structural steel, and pipelines and related equipment. Acted as Lead Inspector on projects as required. Major projects included the following:

QC Supervisor contracted to Century Contractors, Matthews, NC, during the installation of two package boilers at the Merck Chemical plant in Elkton, VA. Performed all required inspections (VT, MT, PT), scheduled and monitored RT, UT and PWHT, performed walk-downs, scheduled and witnessed hydrostatic testing, and completed as-built drawings.

QC inspector assigned to work with Flour-Daniel during construction of the Philip-Morris Expanded Tobacco Project in Richmond, VA. Performed system walk-downs, witnessed hydrostatic testing, monitored and inspected welding and performed MT/PT and all UT on the project.

International Inspection Services
Slidell, LA

7/96-10/96
Ultrasonic Specialist assigned to Shell Offshore Group to monitor and inspect welds fabricated at manufacturer's facility in Taranto, Italy. Primary responsibility involved performing ultrasonic verification inspections on primary support components of Shell's Ram-Powell platform. The purpose of the work was to ensure reliability and accuracy of manufacturers Ultrasonic personnel. Certified to Shell Offshore Specifications in accordance with API RP-2X

National Inspection Consultants
Fort Myers, FL

5/94-6/94 & 11/95-7/96
Ultrasonic Specialist-Assigned to work with Hamilton-Standard Corporation performing Ultrasonic Inspections on aircraft propellers at client sites and designated FAA repair stations. Inspections consisted of manual and automated ultrasonic methods to determine structural integrity and thickness of blades and hubs. Sites visited included Air Tahiti in Papete, Tahiti, IPTN in Bandung, Indonesia, Merpati Airlines at various locations in Indonesia, and FAA repair stations in Long Beach and Rock Hill, South Carolina. Certified to Level II in UT in manual and automated methods unique to Hamilton-Standard. Received FAA Repairman Certificate valid for the duration of employment.

2/93-4/93
Ultrasonic Specialist-Assigned to work with Shell Offshore performing ultrasonic and visual inspections of Dip Chains for the Auger-1 Platform at manufacturer's facility in Vasteras, Sweden.

Additional experience history provided upon request.

EDUCATION
Benedictine High School
Richmond, VA

Hutchinson technical Institute
Hutchinson, MN
2000 hour program in NDT Technology with emphasis on the five main NDT methods and related subjects.

TRAINING
Canadian Society for NDT
24 hour film interpretation course

Virginia Corporation
Richmond, VA
Visual Inspection, Level I-40 Hours, 1990
Visual Inspection, Level II-40 Hours, 1990

Electric Power Research Institute
Charlotte, NC
Detection of IGSCC-1990
Sizing of IGSCC-1992
Weld Overlay-1992

NIC/Hamilton-Standard
Windsor, CT
Manual and Automated Inspection of Aircraft Propellers-1995/1996
General Electric/Life Extension Services
Manual and Automated Ultrasonic Inspection Systems

CERTIFICATIONS
Level III UT ASNT Certificate # 1802
Level III RT, MT, PT, VT (with previous employers)
API 653-Certificate # 1524 (Valid from 1995-2001-exp.)
AWS CWI Certificate # 98020781
API RP-2X by Shell Offshore, Inc.
IGSCC Detection and Weld Overlay
PDI Austenitic and Ferritic Detection and Length Sizing-1996
Various company specific manual and automated ultrasonic certifications

Experienced with MS Word, Excel and Outlook.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 951 to 1000 of 2391)

Go to Search Parameters...

Brief Description

Computer Hardware & Network Engineer

I am a heavy mobile equipment operator and inventory specialist for a military contracting company (ITT)

I am working US ARMY DEFENCE in kuwait as mechanic associate since from 2005 to Till date in maintenance department.I have trade skill experience 6.5years,in diesel engines,heavy commerical trucks,forklift maintenance.I skills are post diploma in automobile techonology(SISI.GOVT)

Qualification: B.E. (Mechanical), Diploma in International Trade. Skill: 14 Years Work experience in the field of Production, Planning & Control and Product Development

Strong in MS SQL Server database design, SSIS, PHP and ability to quickly develop proof-of-concept websites

A combination of a Bachelors degree in Geological Engineering and a Masters degree in Hydrogeologist puts me in a very firm footing for success in environmental consulting

Execllent computer literacy,3d modeling via solidworks,autocad

My background is primarily Biology and Ecology driven. I have been an Environmental Investigator and have also worked for a very large environmental consulting firm outside of Chicago. I am currently working as an Environmental Scientist outside of Atlanta and looking to further my career.

Experienced Mechanic, Have a wide range of experince from small engine to large diesel.I have a comercial drivers license and current DOT physical. Licensed Classes ABCD. Endorsements Hazmat, tanker, doubles and triples. I am also an experienced driver.

I'm a Graduate in Bachelor of CIVIL ENGINEERING and acquainted with basic knowledge in Computers especially MS office, Project and CAD.Experienced in water supply networks and execution.

I am interested in a challenging position that will utilize my proven skills and knowledge in the environmental field and enhance my personal development.

Seeking a challenging and rewarding career in your Organization to pursue a growth oriented career in Environmental Studies.

As a project manager, I have completed numerous phase I, II and III environmental site assessments, geo-textile installations, geophysical surveys and large-scale groundwater remediation programs gaining extensive knowledge in numerical and analytical modelling techniques for solute transport.

Seeking career in wastewater field in Middle Eastern Country

To acquire a challenging full-time position utilizing the skills I have gained through my experience and education in Industrial and Systems Engineering.

A reliable, dedicated & commercially aware environmental manager/ecologist with extensive experience across the environmental & civil engineering industry.

I am looking for an opportunity to use my experience and education toward helping the environment. I am willing to travel and enjoy learning. Thank you for your consideration.

Enviromental Foreman

My functional areas of expertise include process improvement, risk management, regulatory compliance, accident reduction and claim investigation. In addition, I directed programs for Workers’ Compensation, EHS and DEP, ensuring compliance with State and Federal guidelines.

NDT/QC UT Level III, prior RT/MT/PT/VT Level III. 25+ years experience in inspection in power, oiland gas and construction

In my 23+ years working in the geothermal fields in the Philippines, I have developed skills engineering, management, administration, safety and other disciplines. I feel that I am qualified for any geothermal job.

To share my expertise, to be a team player in the organization, I have an excellent understanding & have Over 16 years experience in maintenance, installation, diagnoses, troubleshooting, Configuration and repair of Computers, Fax Machines and Printers, With excellent verbal and communication skills

Leading the implementation of HSE policies and practices

Operations Manager, Strategic Planning, R&D, Business Development, Budgeting, Forecasting, Lean Manufacturing Leader

I am a mechanical engineering graduate, having experince in Design of under water pipe line Crossing (PE), Hydraulic design of Distribution Networks for 21 Villages using EPANET- 2.0 Software. Assisted for Report preparation of Hydraulic Calculations. AutoCAD2004

Carried out maintenance and service central HVAC chilled water system, trouble shooting in control wiring; screw and reciprocation chillers; Building management system [BMS]; air handling units (AHU); fan coil units (FCU); split and package units.

c++,c,Core Java, Oracle, etc. 1+ yrs of Exp. in Software Development life Cycle.

Master's Degree in Telecommunications Management 3 and a half years of experience Configured Cisco devices Experience in analyzing end-user traffic QoS protocols Creative problem solving Bilingual (Spanish & English)

OBJECTIVE A challenging position in environmental engineering or hydrology that will allow me to use my analytical skills.

To work in a team environment on projects that would give me an opportunity to use the technical knowledge that I have acquired and that encourages collective thinking and learning.

Summarizes education and abilities.

Excellent writing ability. Independent research skills. Proactive. Motivated. Goal-Oriented.

To seek a firm that shall develop my leadership qualities further and make me a step closer towards becoming a total person. To further enhance my capabilities, expand my knowledge, apply my abilities, and improve my personality in an environmental firm

I am a brilliant and confident chemical Engineer with always in sight of practical aspects of Engineering. I am technically strong, but would like to have exposure at the Industry level. I promise that I would be a fast learner and an asset to the industry in the future

I worked 1 year in the environmental field. Thesis: "3D finite difference gasfield simulation model and induced subsidence verification". During it I've passed a stage near ENI group. Currently I dedicate myself to study C++, and I've a collaboration with Basilicata's University - Italy.

Research, Scientist, Chemist, Inorganic, Organic, Organometallic, Catalysis, Spectroscopy

Completed 1st Year MBA from SV University, Tirupati (Distance Mode) Pursuing 2nd Year MBA-HR.

Ph.D. Geologist with five years experience

Ph.D. in Metallurgy, Specialist in Surface Treatments, Project Management, International Experience etc.

6.5 years experience as Hydrologic Technician with the U.S. Geological Survey

Environmental Engineer, EIT, Good at Auto CAD,MS Office,HEC-HMS,S-PLUS

Certificated Asbestos Inspector

My Profesional Profile

To carve a niche for myself in the industry by working in a challenging position in the field of Electrical Engineering, which shall leverage my skills and bring value to my employer.

Massachusetts Maritime Academy student that is going to be graduating in December of 2003

To obtain a position where I can apply my expertise in mechanical engineering to work on interdisciplinary engineering projects such as finite element analysis (FEA), mechanical design, test, vibration and acoustics.

Over 35 years experience in operating heavy equiptment. Can operate expertly all sizes Dozers, Loaders, Pans.excavators on Cats pc235 - pc3855B, Komtasos, pc 400 - pc12507, Hitachi, pc450- Ex1900, Hyundai pc360-R500 , loaders110 Trojan to WA 600 w/ a 20 ton lift, Willing to travel abroad.

Experience in handling projects on Environmental Impact Assessment Study, Groundwater Modeling, Solid Waste Management, Rainwater Harvesting, Treatment plant Design, EMS, ISO-14000 and ISO-9000.

I have experiences regarding Environmental Impact Assessment(EIA), permitting, environmental monitoring and project implementation conformance monitoring. I have three years environmental engineering and international experiences with high standards(Projects implamented by WorldBank&EC Policies.)

environmental engineer, specializing in Air pollution with strong knowledge in computing

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [ 20 ] 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out