Resume - A Uk based professional Chemical/ Process Engineer with 20 years experience in v...

Misco Jobs

Resume #5203

CONTACT INFORMATION:
View contact information...

Specialist environmental equipment and plant supplier (SBR's, aeration, composting). Short term contract Process Engineering work and consultancy.

• Contract Manager at Texaco's Pembroke Refinery. Responsible for the man management, process and maintenance of the waste water treatment plant and sludge processing facilities. Responsible for co-ordinating and overseeing the sales of Nalco process chemicals (corrosion inhibitors, de-emulsifiers, por point supressants, flocculants, coadgulants) throughout the refinery (£1.6m /annum).

• Senior Design Consultant for Southern Water Working in a group of consultants on the feasibility for the construction and extension of sewage works to meet the tightening consents on quality of final effluent.

• Wardell Armstorng Consultants Preparation of feasibility study for the construction and operation of a Centralised Anaerobic Digester in Stoke-on-Trent.

• Stam Ltee, Mauritius. Prepared the FEED study for the construction of a landfill leachate treatment facility.

• 2000 - Winner of BIO-WISE Demonstrator Project competition, in conjunction with University of Leeds and Selden Research. Project for the biological treatment of waste water from a chemical manufacturing plant using a Sequencing Batch Reactor.

• Negotiated representative's agreement with a US manufacturer of process equipment. Sole representative in the UK and Europe for unique environmentally related processes and equipment.

• Obtained a grant from the DTI for the development of a novel effluent treatment process. This project was done in conjunction with Staffordshire University.

• British Nuclear Fuels Engineering. Member of the Process Engineering section of the project team working on the Sellafield Drypac Plant. Producing the Process Design for the £410 m plant. This plant is for the treatment of a radioactive sludge composed mainly of magnesium hydroxide. Duration of work was 1 year. Activities included preparation of Process Descriptions, Process Flow Diagrams, Engineering Flow Diagrams, Process Data Sheets, Instrument Process Data Sheets. Equipment sizing and specification. Interfacing with suppliers on development and design work. Conducting design and safety review meetings.

• Knight Piesold, Working as an associate, providing Process Engineering Produced a preliminary process design and cost estimate for the treatment of minewater and subsequent sludge processing facilities for Las Crusas, Spain.

• Knight Piesold, Working as an associate, providing Process Engineering. Technical services for process evaluation for the Active Treatment Design Report – Wheal Jane Minewater Project.

EXPERIENCE PRIOR TO FORMING ZYLO TECHNOLOGY

DORR-OLIVER Co Ltd October 1993-September 1995

Contractor/process equipment supplier. Active in Minerals, Chemicals, Pulp and Paper, Pharmaceuticals, Municipal Effluent and Industrial Effluent Treatment. Projects up to £20M in Fluidised Bed Incineration, Filtration, Thickening, Dissolved Air Flotation.

Business Manager - Environmental Systems October 1993-September 1995

Development and running of the Industrial Effluent Treatment Business. Tendering, negotiating, developing marketing strategy, Project Management.

• Developed a phosphate removal process from wastewater for Eli Lilly Pharmaceuticals, Cork.

• Approached by Dorr-Oliver to take the position.

• Implemented Failure Mode and Effect Analysis as a means to improved project execution.

MONSANTO plc

Batch Fine Chemical Manufacturer June 1992 - October 1993

Senior Project Engineer June 1992 - October 1993

Project Management and Cost Control. Development of Front End Packages, Premise Documents and Detailed Designs. Working in a TQM environment. Preparation of an application to the HMIP for the authorisation of a prescribed process under IPC.

• Successfully installed projects for acetone scrubbing vents and the pastillation of a molten polymer.

• First Project Engineer in Monsanto Europe to fully utilise CPM (Capital Project Management) on Pastillator project.

• Liased with and visited Monsanto joint venture in Korea during the Pastillator project.

AUGHINISH ALUMINA LIMITED (65% Alcan, 35% Billiton)
High temperature Bayer Process Alumina Refinery

Section Engineer June 1990 - June 1992

Responsible for process and maintenance within section. Supervision of two Engineers and a Technician. Processes within section included Counter-Current Decantation and Washing of red mud, red mud disposal, Multistage Evaporation, Effluent Treatment and Crystallisation,.

• Instrumental in implementing ISRS in Section (International Safety Rating System)

• Solved refinery water balance problems by installing new procedures for setting wash water control philosophy.

• Reduced section maintenance budget from £3.5m to £2.5m in two years.

• Deputised for Section Manager (73 employees in Section) Resolved labour dispute.

• Represented Aughinish at Alcan International Conference in Montreal on red mud and presented two papers.

DORR-OLIVER EUROPE March 1984 - June1990

European Industry Manager Designate for Pulp and Paper

Process and marketing support for sales of recausticizing plants (up to £3M), pulp filters and screens

• Youngest ever Dorr-Oliver Industry Manager.

• Award for outstanding performance.

Senior Process Engineer/Process Engineer/Applications Engineer

Laboratory and pilot testing (Thickening, Filtration, Effluent Treatment processes), mechanical design of process equipment, commissioning, specifying of ancillaries in projects.

EDUCATION

9 'O'-levels, 4 'A'-levels Chesterfield Grammar School
B.Sc. Honours in Chemical Engineering, University of Newcastle upon Tyne
Chartered Engineer
Member of the Institution of Chemical Engineers

COURSES INCLUDE

Many in Solid/Liquid Separation and Waste water

Monsanto Management Style
Capital Investment Appraisal
HAZOP
Full training in Total Quality Management
Centrifugation
Numerous papers (UK. Germany USA)

PERSONAL

Date of Birth 28th June, 1961 - Married - Two Children

INTERESTS

Caving - Swimming - Cycling – Jazz

LANGAUGES

French - - Spoken Fair
Written Basic

German Spoken Fair

SPECIFIC PROJECT EXPERIENCE 1984 to DATE

2003 Texaco Ltd, Pembroke, Wales Process Consultant for projects to tackle waste arising from processing DOBA crude. These were a heavy metals removal facility; incubator for nitrifying bacteria and carbonaceous substrate dosing. Additional process and project engineering for the refurbishment of API separators and the installation of a feed tank for the dewatering centrifuge.

2002 Wardell-Armstrong, Newcastle-under-Lyme. Feasibilty study for the construction of a Centralised Anaerobic Digester at the Chatterley Whitfield Mining Museum site in Stoke-on-Trent.

2002 Stam Limited, Mauritius. Front end Process Design for a landfill leachate treatment plant.

2001 Selden Research Ltd, Buxton. Design, supply and installation of a Sequencing Batch Reactor to simultaneously operate with anoxic and aerobic conditions in the same reactor. Following laboratory tests the design and specification of a full scale plant will be undertaken. Laboratory tests will be undertaken by Aqua Enviro at the University of Leeds

1997 to Imerys (formerly English China Clay International) Replacement of gearbox
2000 (centre drive) on 140 ft diameter clay thickeners.

1999 Lundbeck Pharmaceuticals, Teeside. Instigated testwork to evaluate the use of Sequencing Batch Reactors to treat wastewater from a pharmaceutical factory. Testwork carried out at Leeds University on behalf of Zylo Technology.

1998 Camp Bros. (Café) Ltd. Scotland. Instigated testwork to evaluate the use of Sequencing Batch Reactors to treat wastewater from an ice cream factory. Testwork carried out at Leeds University on behalf of Zylo Technology.

1998 to Knight Piesold, Ashford, Kent. Provided consultancy services on process design
2000 for the Wheal Jane Minewater Project.

1997 Knight Piesold, Ashford. Produced a preliminary process design and cost estimate for the treatment of minewater and subsequent sludge processing facilities for Las Crusas, Spain

1997 Lyons Maid Nestle. Conducted laboratory and pilot scale testwork to establish the treatability of wastewater by a Sequencing Batch Reactor

1995 British Nuclear Fuels Engineering Limited, Salford. Sellafield Drypac Plant. Process for screening and sorting radioactive silo contents (sludge and swarf).

1995 Aughinish Alumina, Limerick. Seed hydrate dewatering on large diameter vacuum disc filters. Prepared the Front End Design package and tender documents.

1995 Pfizer Pharmaceuticals, Sandwich. Front end design and tender for jet aerators, pipework, compressors and control equipment for activated sludge plant

1995 Texaco, Pembroke. Dissolved Air Floatation to remove oil from refinery wastewater. Pilot testing and Front End Design preparation

1994 Knight Piesold, at Wheal Jane Mine Cornwall. Initiated testwork to prove residual cadmium levels in treated minewater.

1994 Eli Lilly, Cork. Testwork to define a phosphate removal process from wastewater. Test report used to demonstrate BATNEEC to Irish EPA. Front End Engineering Package prepared for Eli Lilly. Thickener designed and sold.

1993 Monsanto, Wrexham. Project Engineer in plant manufacturing fine chemicals by batch processes.

1991 Aughinish Alumina, Limerick. Process definition for effluent treatment plant. Neutralisation, sedimentation and centrifugation of settled sludge. Hydrocyclone studies for hydrate thickening. Also commissioning of a Horizontal Belt Filter for the dewatering and washing of oxalate crystals.

1989 Laporte Inorganics, Widnes. Part of the commissioning team for two stage lime neutralisation and two-stage sedimentation process with underflow recycling.

1989 Cotton Valley Sewerage Treatment Works, Milton Keynes. On site tests to demonstrate improved underflow on Primary Clarifiers using diaphragm pumps.

1989 Reynolds Metals, Corpus Christi, Texas. Laboratory testwork to size and specify a Horizontal Pan Filter for dewatering and washing Alumina Hydrate.

1988 Acna Chemie, Genoa, Italy. Troubleshooting and modifications for chemical manufacturing process using Rotary Vacuum Filters.

1988 Alicel, France. Commissioning team on recausticisation process for Kraft pulp mill. Lime slaking, causticizing, dregs filtration, green liquor Clarification, lime mud filtration, white liquor filtration.

1988 British Sugar, Peterborough. Development of a novel approach to brown stock washing on proposed straw pulp mill.

1988 Hickson and Welch, Castleford. Laboratory based testwork on effluent coagulation and flocculation and neutralisation. Precipitated sludge then used to perform thickening tests and dewatering by filtration.

1988 Interalumina, Venezuela. Conducted site based testwork to size Horizontal Pan Filters for the deliquoring and washing of seed hydrate.

1988 British Steel, South Wales. Laboratory testwork and commissioning team for two-stage neutralisation of acid water using lime with underflow sludge recycling. Thickened sludge was subsequently pressed.

1987 Interalumina, Venezuela. Conducted site based testwork to prove performance of a Rotary Vacuum Filter in comparison with gravity thickeners.

1986 Tioxide France, Italy, UK and USA. Site based pilot tests to prove operation of the Press Belt Filter for the dewatering of titanium dioxide.

1986 Deanshanger Oxides, Milton Keynes. Testwork for the sizing and specification of a Press Belt Filter and a Horizontal Belt Filter. Commissioned the equipment.

1985 British Coal, South Wales and Yorkshire. Commissioning of two Horizontal Belt Filters for the dewatering of coal fines.

1985 May and Baker, Norwich. Effluent neutralisation tests using milk of lime and subsequent sedimentation testing.

1985 Corleone, Sicily. Pilot ultrafiltration tests for concentrating citrus oil.

1984 Jahncke Fruit Juices, Hamburg. Conducted lab and pilot ultrafiltration testwork to define process. Commissioning of the full–scale process.

PAPERS, PUBLICATIONS AND PRESENTATIONS

"Treatment of Effluent from a Small Industrial Cleaning Manufacturer using SBR Technology"
Presented at Biennieal Conference on Management of Wastewaters
April 2002, The Carlton Highland Hotel, Edinburgh, Scotland

"Sequencing Batch Reactor Technologies – Packaged Systems for Small Communities"
Presented at conference entitled "Sewage Treatment Strategies for Coastal Areas and Small Communities"
December 1999, Edinburgh Conference Centre, Scotland

"Environmental Biotechnology"
Presented at Biowise Seminar run by DETR
April 1999, Nottingham, UK.

"Sequencing Batch Reactors for Small Applications"
Presented at a course entitled "Sequencing Batch Reactors 2"
September 1998, University of Leeds, UK.

"Tightening the Paper Mill Water Circuit Using Wedge Wire Screens"
Paper Industry Technical Association Symposium on the Environment.
April 1995, Maidstone, UK.

"Selection and Scale Up of Continuous Filters - Experimental and Calculation Procedures".
Presented at the Filtration Society 30th Anniversary Symposium.
September 1994, Birmingham, UK.

"Treatment of Mixed Effluent from a High Temperature Bayer Process Alumina Refinery".
To have been presented at a conference -"Waste Water Treatment in the Process Industries".
September 1992, Birmingham, UK. The conference was cancelled.

"Aughinish Alumina Mud Stack and Storm Water Management"
"Red Mud Filtration, Viscosity Reduction and Pumping at Aughinish Alumina"
Both presented at "Mini Symposium on Red Mud Handling".
October 1991, Alcan Headquarters, Quebec, Canada.

"The Development of New Applications for the Vacuum Drum and Press Belt Filter".
Presented at 5th World Filtration Congress
May 1990, Nice, France.

"Vacuum Filters for a Wide Range of Applications in the Bayer Process".
Presented at the TMS Conference.
February 1990, Los Angeles, California, USA.

"New Horizontal Belt Filters for a Wide Range of Applications".
Presented at the Filtech Conference.
September 1989, Karlsruhe, Germany.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 2395)

Go to Search Parameters...

Brief Description

1) WIre formed products, tube bending, Rubber injection molding, stamping and robotic welding. 2) Screww machine and fasteners. 3) Supervised up to 154 quality supervisors, inspectors. 4) Am qualified for the position as stated,

Solid background (15+ years) in multi-media, audiovisual, television production, with strong emphasis in management, production, operation and professionalism. The consummate AV professional. Consistently exceed goals and customer service expectations. Experienced in handling international accounts

Finance Executive Manager with over 12 years at the largest bank in North West Russia with experience in finance and accounting, with a demonstrated capability in system analysis, problem solving, troubleshooting and process improvement. Persuasive communicator with ability to generate, develop and

See resume body

Water Treatment, Water Purifications, Water Works Automation, Project Management, Water Works, Dams, General Management

20 years of experience as a Mechanical Engineer working within the water treatment industry

Energy and environmental assesment work and Operation and maintenance work of power sector

I am a focused professional who is able to perform under high pressure, I pay attention to details. I have a great organizational and interpersonal skills and I am capable of working well individually, as well as a team member. I am also a fast learner. I am computer literate

I have a diverse software programming, development, and project management background. I am especially interested in a position in the UK or one which will have international travel. Relocation is not a problem as I rent short-term housing and am available immediately.

Over 25 years of progressively responsible experience in environmental program management, managing and performing site characterization studies, feasibility studies, remedial alternative development and implementation for numerous oil and gas sector projects in the US and internationally.

M.SC ENVIRONMENTAL SCIENCES WITH 10 YEARS EXP.IN HSE FIELD

Industrial Engineer, Environmental Science M.Sc. & Ph.D., experience in public policy and private QHSE Management

I have over 18 years experience advising clients investing in all the main industrial sectors on how international ESG risks, perspectives and standards are translated, interpreted and implemented into their Asian operations.

Sr. Software Programmer with 8 years of software development experience in Micorosoft technologies. He specializes in the implementation of client/server, database, graphics and/or internet-based systems using Visual Studio.Net suite.

M.Sc (Physics), M.Tech. (Atmospheric Physics), Ph.D.(Air Quality Modelling & Micrometeorology in Coastal environmnet.): Air Quality Modeler and Micrometeorologist

Research scientist in experimental physics or material science

I am a self starter, that can take a concept or idea, and implement it by using conventional tactics or by thinking outside the box. I like to travel, particularly in Asia. I am learning Chinese (Man.) at this time. I am trained and hold the appropriate credentials as an attorney, Mediator, actor.

A Chemist with 18 years diversified analytical laboratory experience in the field of environmental, petrochemicals R&D, thermal power plant and pharmaceuticals. I have hands on experience on state-of-art equipment like GC, GC/MS, HPLC, HIC, AAS and different other analytical equipment.

I administered an environmental restoration program for the State of North Dakota for over twenty years.

Well versed in the process of cotton and synthetics yarn spinning with hands on experience in latest spinning machines

Qualified and experienced professional in hydrology system modeling and engineering project management. Seeking to attain a challenging position that provides responsibility and management in a research or engineering environment where I can be actively involved in solving environmental issues.

Mechanical Senior Designer UG NX3

Sales and marketing Experiences.

Environmental Engineer with Background in Hydrogeology and Geology

Water treatent plant operator for more than 14 years, Doing BA degree at USP

Competencies , skills • • Estimation (BOM) activity based costing (ABC) • Excellent negotiation and analytical skills • Previous customer service experience with key accounts – hands on approach •

Skilled writer with marketing, engineering, and math background. Based in metro Seattle, but will work in other locations. Two graduate degrees; two published novels. Can use Adobe Frame Maker, Microsoft Word, and other authoring tools.

A Uk based professional Chemical/ Process Engineer with 20 years experience in various aspects of Plant Operations and Design. Looking for ex-pat status or home based job/contract. Special interests include Environmental Engineering, solid/ liquid separations and wastewater treatment.

20+ years Civil Engineering experience on Public Works, Utilities, Industrial, Commercial and Residential projects. Experienced in streets, highways, water systems, sanitary & industrial sewers, airports, site development, grading, drainage, underground piping and specifications

Hydrogeologist

Experienced Environmental/Mining Geologist with extensive hands-on experience in both geological and geotechnical data gathering systems. Field work includes the collection, processing and interpretation of air quality data for mold, and asbestos. Excellent communication and writing skills.

Recommendation of Building plan approval

I am a grduate in Civil Engineering and having an experience of 34 years as Civil Engineer.I have acquired Diploma in Computers in Office Management in the year 1991 and utilised M.S.Word &Excel while sending formats to World Bank,New Delhi on behalf of Energy Sector.

I have more than 15 years experience in safety and environmental policy implementation for construction sites, drilling, workovers and explorations, refineries, pipelines, shipyard and onshore/ offshore oilfields installations.My last assignment was with Spie Petrofac International Ltd., for world’s

VP Sales used strategic planning to increase annual profit by $13 mm and sales by 17% in a declining market. Proficient in marketing and sales management (direct, business-to-business, consultative, & value added). Negotiated contracts in excess of $1 mm. Record sales in 5 of the past 9 years.

Refining and petro chemical environmental specialist

Plan for disasters; Respond to recovery relief; Provide care for individual after disasters; Provide social services to the individual during and after disaster

I am a senior executive with more than 20 years project experience, managing sales, marketing, operations, and personnel at the district, regional, and corporate level.

• Experience in multiple project phases - scoping, design, estimating, procurement, materials management, construction, operation, shut-down, cleanup and closure. • Experience in coordination of industry requirements with federal and state regulatory demands.

HNC Qualified Engineer with an extensive experience in a broad cross-section of engineering, predominantly structural/mechanical civil/building services, familiar with all aspects of project management. I.e. planning, cost control, tender evaluations, contract law, health and safety.

HSE & H2S iNSTRUCTOR INTN`L CERT.

Numerous years of experience in environmental regulatory compliance, working with hazardous waste, wastewater treatment and environmental samples. Involved in all concerns for both private sector and governmental compliance with RCRA, CWA, CAA and OSHA regulations.

licensed professional engineer focused on providing quality environmental management and engineering services that allow customers to improve operations and make informed decisions about facilities and properties.

I am a diversely experienced Occupational Safety and Health professional with demonstrated experience in managing safety and health departments, as well as providing environmental support for chemical manufacturing sites.

Attain a professional position in water-wastewater engineering and bio-chemical treatment processes to use and develop skills valuable to the professional practice of environmental engineering

I am interested in any local position as a Scientist, Assistant Scientist, Associate Scientist, Technologist, or Laboratory Technician in the field of Microbiology or Biology. I would like an opportunity to post for any position that would fit these criteria.

VoIP endpoints, IP Agent, Avaya Communication Servers, MS Office Suite, Network analyzers

Environmental management, particularly with respect to major construction projects – developing environmental systems, inspection, monitoring & implementation.

I am an engineer with over 20 years experience in the Middle East Region. I hold an M.Eng in Environmental Engineering and an MSc in Agriculture Irrigation. I am fluent in Arabic, French and English.

Senior Geologist with expertise in applied geology (geology applied to mining including blasting, slope stability, hydrogeology, reclamation, etc), research, evaluation and communication skills. Preference is contract or project work.

1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out