Resume - Graduated Mechanical Enginner with Extensive Experience in Europe, Australia and...

Misco Jobs

Resume #56078

CONTACT INFORMATION:
View contact information...

CAREER GOALS

Seeking a challenging position requiring demonstrated skills in leadership, planning and communication, thus utilizing inter-personal skills with my experience, educational qualifications and technical knowledge.

PROFILE SUMMARY

* 10 years experience in maintenance in industry, mining, offshore oil,
* Exploration and petro-chemical process plants.
* 3 years solid experience in projects in the mining industry in Australia.
* Exposure to plant operations, production, planning and management skills.
* Leadership skills in motivating others and building a real team spirit.

ACADEMIC CREDENTIALS

* Further planned studies for 2007 to 2008:
Presently enrolled at Ellis College (New York Institute of technology to study a Project Management Degree online starting in Spring 2007)
* Graduated with Distinction BSC Mechanical Engineering Almeda University USA in September 2006.
* Graduated Balga High School in 1985, Perth, W.A. Australia. I completed year 12 with physics, mathematics and chemistry as main subjects.
* 4-year apprenticeship diploma as Diesel Hydraulic Mechanic in Western Mining Corporation, including a 1-year study in the College of T.A.F.E. (Technical Adult Further Education) in Australia.
* 1 year Steam Utilization Engineering course provided by Spirax Sarco Ltd. England.
* Course in computer education and application.
* ROVC Technical College in Amsterdam completed a Maintenance Management Study provided during my employment with General Electrics.
* Automatic Power Control System course provided by Spirax Sarco Ltd. England.
* Hot Water Treatment course provided by Spirax Sarco Ltd. England.
* Computer courses, Lotus Notes, Windows, Electronic software control program's, PLC systems.

TOP CAT TRAINING:
Electronic technician, 3161 regulator/governor, electronic controls, Service Information System (SIS), 3500 series – troubleshooting, T.A. (Technical Analysis), HEUI Injector Systems, MEUI Injector Systems, TESTO analysis for gas engines, trouble shooting C Series, Marine & Industrial Engines, 3412E, 3176, 3196, 3406E, 3516B, 3606,3608 Marine & Industrial Engines trouble shooting, Certified Caterpillar Marine Analyst, Capstone Micro turbines, Caterpillar Gas Engines, G3400 & G3500 Series, and the 3520 1.3 MW, Gas Engine/Generator set.

OTHER PETROCHEMICAL EQUIPMENTS EXPERIENCE:
Worthington Turbines. Regenerative disc friction pumps, compressors, Heat exchangers, reactors, coolers, and sundyne pumps.

EARTHMOVING EQUIPMENT EXPERIENCE:
Caterpillar range of Excavators, loaders, graders, Volvo EC range of multi tasking Construction equipment, Tamrock CHF1000 and Atlas Copco Rock drilling rigs, Ingersoll rand DM range of Rock drilling equipment

SAFETY TRAINING:
HUET training (Helicopter Underwater Escape Training), NEN3140 Electrical Safety training. Dutch VAC Basic Safety Training, and Certification, Underground rescue and survival training certification in Australia. Attended many seminars and safety courses. Fire Fighting training and Fire Escape training at the DHTC Institute in Den Helder, located in The Netherlands, Europe.
NBC (nuclear & biological protection training at KBR Houston).
Safety Training TSTI, procedures at US Base camps.

WORK EXPERIENCE

Kellogg Brown Root (KBR), Houston, Texas, USA
January 2007 – present: Prime Power Caterpillar Generator Foreman (Engines)
Location: KBR Camp Lemonier, Site 4, US Base in Djibouti, Africa
Duties:
* I am responsible for the Caterpillar Engine Prime Power Generator Units at Prime Power.
* I organize the job planning, maintenance procedures, troubleshooting, and overhauls of power generation Units at Camp Lemonier Djibouti Horn of Africa.
* I lead a small team of local and international mechanics and train them to the Caterpillar Standards of maintenance and procedures on these engines.

Geveke Motoren BV (Caterpillar), Aalsmeer, the Netherlands
January 2002 – June 2006: Service Engineer
Duties:
* Commissioning new engines for our customers.
* Service & customer support.
* Periodical engine overhauls.
* Troubleshooting.
* T.A. (Technical Analysis) inspections.
* Service & support to the offshore N.A.M. oil platforms.
* Co-ordination and job planning.
* Inspections.
Achievements:
* Successfully commissioned the Global Switch project with the installation of five 3516B engines / generators of 1856 kW.
* Commissioned the M/S Compromise Holland's largest inland oil tanker.
* Commissioned the Nijlpaard Floating Crane at OBA (Overslag Bedrijf Amsterdam) 3512B engine tandem Generator set.

Brambles Steel, Velsen-Noord, the Netherlands
2001: Workshop Manager
Duties & Achievements:
* Manager of the workshop and staff (15 fitters and 2 welders).
* Operations of special steel transport vehicles for the Corus steel plant in The Netherlands.
* Planning of work, time management.
* Service & customer support.
* General management of staff, meetings, problem solving, safety seminars.
* Overseeing third party agreements, purchase of new equipment, technical adviser to senior management in purchase of new equipment.

Samsung / Volvo Heavy Equipment Europe BV, Groot Ammers, the Netherlands
1998 – 2000: Mechanical and Hydraulic Specialist / European stock controller
Duties & Achievements:
* Managing the operations of equipment assembly, staff, and third party contractors at ETS (European Transport Systems) site in Grootammers, The Netherlands.
* Managed the warehouse staff and parts department at ETS site.
* Developed and Modifications hydraulic systems on excavators for multi-function task, for example breaker/crusher/tilting/rotation functions on SE450, SE350, SE240-LC-3, SE210-LC-3, 170W-3, 130W-3 excavators.
* Hydraulic modifications on SL120, SL150, SL180, SL250 and SL330 front-end loaders and the range of Volvo EC Excavators electrical and hydraulic trouble-shooting on machines.
* Pre-delivery inspections of machines at ETS site.
* Stock control of all equipment for Europe.
* Managed all technical operations of equipment and pre-delivery inspections of equipment.
* Provided my expertise in modifications of hydraulic, electrical systems on the machines.
* Supervised all technical modifications and requirements for our network of dealers and customers in Europe.
* Modified the SL180-2 loader into automatic transmission.
* Successfully modified the 170W-3 two-piece boom hydraulic excavator multifunctional hydraulic system for tilting-, grab-, crusher- and breaker function.
* Daily reporting to the Management of Operations at ETS site.
* Conducted all CE inspections, sound and vibration tests for the new Volvo EC range.
* Provided technical, support and expertise to Volvo Dealers with equipment.

G.E. Plastics ABS, Amsterdam, the Netherlands
1997: WTB-mechanic "A" Supervisor
Maintenance duties:
* Responsible for daily maintenance of process equipment.
* Responsible to oversee trouble shooting and problematical equipment.
* Reporting to the Maintenance Department to improve such problematical conditions.
* Using technical skills to modify equipment.
* Job planning.
Achievements:
* Installed the new H.P. Banbury Mixer/H.G. Banbury Mixer/H.N. Banbury Mixer.
* Modification of the steam control valve system with the help of Spirax Sarco Ltd., The Netherlands. To overcome temperature control problems on the mills, which have troubled G.E. Plastics for the past 15 years.

Jean Heybrooke, Houten, the Netherlands
1996: Service Technician
Duties:
* Responsible for assembly of TORO lawn mowing equipment.
* Responsible for providing service to customers.
* Responsible of assembly of Ditch-Witch boring equipment.
Achievements:
* Successfully installed a power pack system for the Ditch-Witch unit from the USA for a Dutch customer and modified hydraulic unit.

ABEKO BV, Beverwijk, the Netherlands
1994 - 1995: Heavy Equipment Engineer
Duties:
* Repairs and overhaul of earthmoving equipment.
* Modifications of Hydraulic functions for multi-task operations of equipment.
Achievements:
* Successfully modified a CAT 235 excavator on tracks into a mobile excavator on wheels.

EXPERIENCE IN AUSTRALIA AND NEW ZEALAND

SUBCONTRACTOR; SELF-EMPLOYED, PROVIDING SERVICE TO THESE COMPANIES:

Adia Personnel and Davin Industries, Christchurch, New Zealand
1993: Mechanic
Duties & Achievements:
* I worked on contract at the Expansion Project of Canterbury Timber Products. During this period I was involved in the installation of new pumping systems and power generating systems and the installations of the extended conveyors. I found the project educating and interesting.

Skilled Engineering, Burswood, Perth, W.A. Australia
1991 – 1992: Mechanic. Subcontractor
Duties & Achievements:
* I worked for this company in the year 1991 to 1992 on contract on shutdown jobs at various sites.

Parkside Drilling Contractors, Cosmo Howely Gold Project, N.T. Australia
1991 – 1992: Mechanic Engineer subcontractor
Duties & Achievements:
* I worked on contract for this company for approx. 6 months and my job included the repairs and maintenance of 712,812 Atlas Copco and CHF 1000 rock drills. I was the leading hand in the maintenance and in charge of a small maintenance crew.

Monodelphous Engineering Ltd., Perth, Western Australia
1991 – 1992: Mining and oil exploration personnel (subcontractor)
Duties & Achievements:
* I worked as a sub contractor on various mining sites and projects around the country; Dominion Mining, Hayes Creek Gold Mining Project, Argyle Diamond Mining Project, MT Gibson Gold Mining Project, Offshore Oil Exploration Projects in Exmouth and Dampier on the west coast of Australia.

Elf Aquitine Exploration Australia Pty Ltd., Sydney, Australia
1990: Maintenance technician
Duties & Achievements:
* I worked in this company on sub contract. I was involved in repairs and maintenance of equipment and breakdown and shutdown jobs from time to time. The operations were in the Bass Strait in the Tasmania Sea. For other oil exploration projects of the company, I was sent from time to time as and when needed to the various sites.

Taipan Resources Ltd., South Perth, Australia
(Mining and oil exploration personnel)
1989: Underground mobile mechanic
Duties & Achievements:
* I was employed as an underground mobile technician at long shaft nickels mine; site Kambalda, Western Mining Corporation. The mine was an underground site approx. 1,900 meter deep (shaft). My job included the repairs and maintenance of mobile equipment, Tamrock and Atlas Copco Jumbo Rock drills; pumping systems, loco trains, crushers, rock breakers, diesel equipment boggers, preventive maintenance and trouble shooting. This was a very demanding job fit for the brave, I enjoyed it.

PROFESSIONAL DEVELOPMENT & PERSONAL

* Attended extensive safety courses in the mining industry.
* Courses on computer technology.
* Attended seminar "Dealing with maintenance and process problems at work".
* Continued my education with courses to keep up with technology and knowledge.
* Represented my own case to the European Court of Human Rights in family and human rights law, which was one of my greatest achievements in contributing to society and in the field of human rights.

LANGUAGES

* English: mother tongue
* Dutch: fluent

REFERENCES

Excellent professional and personal references available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1651 to 1700 of 2562)

Go to Search Parameters...

Brief Description

GSM/CDMA Project Manager

Experienced & Seasoned Engineer

Thorough knowledge of material management property management, accounting management, procurement and inventory management.

General Accountant/Financial Reporting

Recent Geology Graduate with experience in geologic mapping, interpretation, and analysis.

Honest, proactive, innovative, safe, persuasive

A hard working and dedicated recent graduate with proven organizational skills and practical experience in geological field work. Effective leadership skills and a cooperative team player with the willingness to learn. Can be relied on to get the job done. Seeking a geologist position.

Intend to build a career with leading corporate with committed & dedicated people, which will help me to explore myself fully and realize my potential. To be a part of dedicated, goal-oriented problem solving team.

Mechanical Engineer with experience in Oil, Gas and Industrial air filtration to meet ISA standards

Experienced Engineer, Diverse Background, Mining, Environmental

water and waste water power plant, steam, laboratory, analysis chemical chemist

Project Manager, Telecommunication, Civil Engineer, Project Coordinator, Project Engineer, Supervisor

I am working in an ISP as a Asst. System Admin. Also Computer Hardware Executive. I am Master holer.

IT professional with 7 years of professional experience in diverse roles; varying from software architect, process engineer, project leader and software developer.

Complete Facility Maintenance

AutoCAD, AutoDesk, CATIA V5, Pro E, SolidWorks, MatLab, MathCAD, Maple, MDesign, Ricardo Wave, GT Suite, Fluent, BasicStamp, C++, C+, PSpice, and basic Java programming „« Windows operating systems, Microsoft Office

HR/Recruiting/Client Relationship Expert

A diligent Chemical Engineer committed to hard work. A good team player, highly mobile and willing to be part of a result-oriented team in any part of the world. I am a fast learner, armed with a comprehensive technical understanding in Production/fabrication. I possess excellent communication.

Management/Business Development of Engineering/Consulting Services

Speak, write and read French, English and Arabic. Abilities to acquire new knowledge and skills quickly

Graduated Mechanical Enginner with Extensive Experience in Europe, Australia and Africa in Power generation, Oil Exploration, Mining Industry

I am a highly qualified, experienced and creative professional seeking a Design/ Drafting Engineer position in your Organization to utilize my excellent skills and passion for challenging work.

I have gained significant knowledge in well drilling related activities including formation study, understanding of potential reservoir, Drilling and logging, Reservoir mechanics including estimating oil reserves,completions, drilling, volumetric reserves calculations/Production Forecasting, IOR

Over 10 year experience globally, CEE, Europe in general management, logistics, transportation and supply chain - excellence in strategy, costs optimization, business development, operational excellence, change management and restructuring

Dynamic supply chain specialist with over 15 years’ combined experience across a wide range of activities (project management, commodity purchasing, services and contracting procurement, inventory control). Extensive expertise supported by top Canadian (C.P.P) and USA (C.P.M.) professional designati

College graduate/entry level electrical engineer

Instrumentation, Automation, control & electrical engineer with 3 years experience

Purchasing/Logistics/Supply Chain Expert for more than 12 years of solid experience

. I am having vast experience (22 Years) in an integrated industry in construction, Projects & Maintenance and in Diverse fields. I am also suitably qualified (BE (M), ME (PROD), DIP. IN MGMT, PGDIT) for taking up any challenging assignment with a rewarding career anywhere in the Globe using the mos

Working as a Paymaster for more than 6200 employees.

Customer service, clerical, dental, medical

Over 20 years of diversified management experience with an extensive background in the management, selection and maintenance of vehicle fleets, over the road and off road construction machinery.

Having 4 year exp. in automotive sector.

Communicator, negotiator, manager, natural leader

20+ years in culinary field,client pleaser,professional with a sense of humor

IT PROJECT MANAGEMENT

Mining engineer, master in HSE, no experience.

Geology and hydrogeology

GIS Expert (Esri & Geomedia)

Recent graduate with a Bachelors Degree in Mechanical Engineering looking for entry level position

I have a bacheors in engineering sciences, this is a relatively new discipline , which is essentially electronic engineering with a specialization in solid state physics and instrumentation

To obtain a full time job position in Mechanical Engineering ( Product Design engineering, Sales eng, HVAC, Analyst eng and Consulting)

Ingénieur en CVAC/ Mécanique du bâtiment et énergie

multilingual engineer with significant experience in geographic information system, able to manage from technical components even administrative components, concentrate in the range of prevention, diagnostic, planning, design, assembly, administration and treatment in air, soil, water and territory

Information Technologies, Windows2000, XP. English, Russian, Turkish

A position with a construction company which requires skills in field engineering, cost controlling, planning, scheduling, and estimating

Experienced Graduate Mechanical Engineer & Post Graduate (Marine Engineer) from United Kingdom HOLDING COC (CERTIFICATE OF COMPETANCY), With Shipping background,Drydock,Offshore & Sailing experience as Engineer Office in Command. I have 7 ur on hand experience on International Level.

Safety Manager/Auditor with Fire/Security and Enviromental experiance

Laboratory Analysis, Administration, Safety

Qualifications- NEBOSH Certification, OSHA-510 Certification and OSHA-500 Trainer Certification. Skills- HSE Mgt System, QA/QC Mgt System, Contractor HSE Mgt, Project Mgt, Personnel HSE Training, Regulatory Compliance Mgt, Resource Management, Sustainable Development & Conflict Resolution.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 [ 34 ] 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out