Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #58273 next resume »»
CONTACT INFORMATION:
View contact information...

Career Objective

A challenging position in the research and development field that can best utilize my experience in synthetic chemistry.

Skill Set

- Aqueous or organic solvent based solution chemistry
- Synthesis, isolation and purification of organic, organometallic and main group chemical compounds
- Spectroscopy: IR, multinuclear NMR, UV-VIS, MS, X-ray crystallography
- Anaerobic laboratory techniques(vacuum manifold and dry box)
- Self motivated and eager to take on new challenges
- Excellent observational, organizational and documentation skills
- Superior written and oral communication and interpersonal skills
- Proven track record of successful problem solving
- Ability to work well in a team environment

Experience

Laboratory Instructor Hazardous Materials II 08/2006 - 04/2007
Wilfrid Laurier University, Waterloo, Ontario
Supervisor: Dmitri Goussev (Gusev), Department Chair
Laboratory administration and instruction for undergraduate chemistry courses

Post-doctoral Research Fellow 01/2006 - 07/2006
Wilfrid Laurier University, Waterloo, Ontario
Supervisor: Dmitri Goussev (Gusev)
Research in synthetic organic and organometallic chemistry

Post-doctoral Research Fellow 11/2004 - 1/2006
University of Guelph, Guelph, Ontario
Supervisor: Kathryn E. Preuss
Research in synthetic organic and N, S-heterocyclic chemistry

Post-doctoral Research Fellow 10/2003 - 11/2004
Wilfrid Laurier University, Waterloo, Ontario
Supervisor: Dmitri Goussev (Gusev)
Research in synthetic inorganic and organometallic chemistry

Post-doctoral Research Fellow 02/2003 - 10/2003
University of Alberta, Edmonton, Alberta
Supervisor: Josef Takats
Research in synthetic organometallic chemistry

NMR Research Technician 02/1996 - 10/1996
University of Regina, Regina, Saskatchewan
Supervisor: L. M. Mihichuk
Prepared samples and obtained 1H and 13C NMR spectra

Sessional Lecturer 09/1995 - 12/1995
Faculty of Science, University of Regina, Regina, Saskatchewan
Lectured and graded introductory chemistry

Education

Doctorate of Philosophy, Inorganic Chemistry
University of Alberta, Edmonton, Alberta (2003)

Master¡¯s of Science, Inorganic Chemistry
University of Regina, Regina, Saskatchewan (1996)

Bachelor of Science, Chemistry
University of Regina, Regina, Saskatchewan (1992)

Publications and Presentations

"Reaction of [Fe(CO)4{C2(CF3)2}] and Bulky Phosphine Ligands: The Importance of the Four-Electron Donor Mode of Hexafluorobut-2-yne" Major, Q.; Cooke, J.; Washington, J.; McDonald, R.; Ferguson, M. J.; Takats, J. In preparation.

"M(CO)4(HFB) Compounds (M = Fe, Ru, Os; HFB = F3CC2CF3): A Triad Comparison, Reactions with Phosphines and CO Insertion into the Metal-Alkyne Bond" Cooke, J.; Major, Q.; Gagn¨¦, M.; Mao, T. -F.; Bond, A. H.; Rogers, R. D.; Takats, J. In preparation.

"Substituents effects in POP Pincer Complexes of Ruthenium" Major, Q.; Lough, A.J.; Gusev, D.G. Organometallics, 2005, 24, 2492.

"Ruthenium POP Pincer Complexes" Major, Q. and Gusev, D.G. A Presentation at the annual conference of The Canadian Society for Chemistry, London, Ontario, May 2004.

"Reaction of [M(CO)4(C2H2)] (M = Fe, Os) with [(C5H5)(CO)2WCC6H5]: Unexpected Substitution of Acetylene, Formation and Molecular Structure of [MW(CC6H5)(CO)6(C5H5)]" Major, Q.; McDonald, R.; Takats, J. Journal of Organometallic Chemistry 2003, 681, 250.

"Carbon to Carbon Bond Formation Involving Four-Electron Donor Alkyne Complexes of Iron and Allenes" Major, Q.; McDonald, R.; Takats, J. A Presentation at the annual conference of The Canadian Society for Chemistry, Calgary, Alberta, May 2000.

"Trans-Chlorobis(diphenylglyoximato)(tri-n-butylphosphine)cobalt(III)" Barton, R. J.; Major, Q.; Mihichuk, L. M.; Robertson, B. E.; Seip, C. Acta Crystallogr. 1997, C53, 568.

Awards

Max Planck Society PhD Studentship: 2000
Max Planck Society, M¨¹lheim an der Ruhr, Germany

Faculty of Graduate Studies and Research Graduate Award: 1996
Faculty of Graduate Studies, University of Regina, Regina, Saskatchewan

References are available upon request

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1101 to 1150 of 2526)Go to Search Parameters...
Brief Description
As a project manager, I have completed numerous phase I, II and III environmental site assessments, geo-textile installations, geophysical surveys and large-scale groundwater remediation programs gaining extensive knowledge in numerical and analytical modelling techniques for solute transport.
Seeking career in wastewater field in Middle Eastern Country
To acquire a challenging full-time position utilizing the skills I have gained through my experience and education in Industrial and Systems Engineering.
A reliable, dedicated & commercially aware environmental manager/ecologist with extensive experience across the environmental & civil engineering industry.
I am looking for an opportunity to use my experience and education toward helping the environment. I am willing to travel and enjoy learning. Thank you for your consideration.
Environmental Specialist and Project Manager, with over 18 years of experience in the Infrastructure developkent projects.
NDT/QC UT Level III, prior RT/MT/PT/VT Level III. 25+ years experience in inspection in power, oiland gas and construction
Master's in Engineering and MBA + 28 years Global Multidiscipline Projects Engineering Management Experience
Chemical Engineer specialised in Environment Health & Safety (Facility Management)
CAD Manager for Microstation and AutoCAD
Operating all sizes and makes of excavators,dozers,backhoes,front end loaders,track loaders,scrappers,rollers,skidsters,mini hoes,bobcats,small blade,boom trucks,and hydro axe.Able to obtain all info. from blue prints and/or site plans.Capable of passing inspections foundation,building,and final.
Corrosion Control; AutoCAD drafting; Estimating; Material order; Microsoft Office; Mechanic and Architecture drafting;
10.5+ years experience EDP /ERP /IT Manager VB+SQL+ORACLE+FOXPRO
Machinist- licenced
Oracle PL/SQL Developer Certified Associate (OCA), Oracle Forms Developer Certified Professional (OCP), Relational Database Design
Received, inspected, inventoried, loaded, unloaded, segregated, stored, issued, delivered and turned-in organization and installation supplies and equipment
I am a mechanical engineering graduate, having experince in Design of under water pipe line Crossing (PE), Hydraulic design of Distribution Networks for 21 Villages using EPANET- 2.0 Software. Assisted for Report preparation of Hydraulic Calculations. AutoCAD2004
CAD CAM PLM TECHNICAL SUPPORT
c++,c,Core Java, Oracle, etc. 1+ yrs of Exp. in Software Development life Cycle.
Master's Degree in Telecommunications Management 3 and a half years of experience Configured Cisco devices Experience in analyzing end-user traffic QoS protocols Creative problem solving Bilingual (Spanish & English)
OBJECTIVE A challenging position in environmental engineering or hydrology that will allow me to use my analytical skills.
To work in a team environment on projects that would give me an opportunity to use the technical knowledge that I have acquired and that encourages collective thinking and learning.
Summarizes education and abilities.
Excellent writing ability. Independent research skills. Proactive. Motivated. Goal-Oriented.
To seek a firm that shall develop my leadership qualities further and make me a step closer towards becoming a total person. To further enhance my capabilities, expand my knowledge, apply my abilities, and improve my personality in an environmental firm
I am a brilliant and confident chemical Engineer with always in sight of practical aspects of Engineering. I am technically strong, but would like to have exposure at the Industry level. I promise that I would be a fast learner and an asset to the industry in the future
An accomplished Software Engineer specializing in Object-Oriented Design and Analysis with extensive experience in the full life cycle of the software design process including requirement definition, prototyping, proof of concept, design, interface implements, testing, and maintenance.
Research, Scientist, Chemist, Inorganic, Organic, Organometallic, Catalysis, Spectroscopy
Completed 1st Year MBA from SV University, Tirupati (Distance Mode) Pursuing 2nd Year MBA-HR.
Ph.D. in Metallurgy, Specialist in Surface Treatments, Project Management, International Experience etc.
Knowledge & exp. in Electrical and Instrumentation products, in PLC, SCADA and HMI systems, drives, field instruments, Allen Bradley - Micrologix, SLC, ControlLogix, Compact Logix, Flex Logix PLC’s, Panel View Panel view plus Families, in Controlnet, Devicenet, RSView32, RSView SE Redundant
Microcontroller Application, Interfaces Application - PLC (SCADAPACK,OMRON,GE Fanuc, etc), ADAM RTU,EXPERT Module,Flow Compute (OMNI,Sybertrol,AutoExec), Compact PLC (MOXA ioLogik)
Environmental Engineer, EIT, Good at Auto CAD,MS Office,HEC-HMS,S-PLUS
Certificated Asbestos Inspector
My Profesional Profile
To carve a niche for myself in the industry by working in a challenging position in the field of Electrical Engineering, which shall leverage my skills and bring value to my employer.
Massachusetts Maritime Academy student that is going to be graduating in December of 2003
B.Tech/MBA,Total 5 + years experience in Mechanical & Construction Sectors. Working as CONTRACTS ENGINEER (Planning/Estimate/Proposal/Qty’ Surveyor) in M/s CAPE EAST LIMITED CO (W.L.L), DOHA, QATAR.
Chemical Process Engineer, Aspen Plus, HYSYS, MATLAB, CHEMCAD, Reviewing PFD, P&ID, Design Specifications
Over 4 years experience in mining; excellent project management, report writing, schedulling, planning and prioritising skills; capacity for implementing, managing and maintaining environmental management systems (ISO 14001) including internal auditing; great commmunicator and trainer.
Master's Degree in Geology with a sed/strat background. My thesis dealt with reconstructing the history of sedimentationn and deformation of salt structures. I also have 10 years experience in drafting and analysis with AutoCAD and ArcGIS.
Competent and adept geologist with environmental investigations experience
Transmission Engineer- power system circuit and substation design & planning
Masters in Business Administration (with specialization in Finance and Human resources) Hyderabad, A.P, India.
Interdisciplinary exposure to sciences and arts: Engineering-Business-IT-environmental (which is a very rare profile). Highly developed set of skills: Coordination skills, Pedagogic skills, and Critical evaluation skills
Over 35 years experience in operating heavy equiptment. Can operate expertly all sizes Dozers, Loaders, Pans.excavators on Cats pc235 - pc3855B, Komtasos, pc 400 - pc12507, Hitachi, pc450- Ex1900, Hyundai pc360-R500 , loaders110 Trojan to WA 600 w/ a 20 ton lift, Willing to travel abroad.
Experience in handling projects on Environmental Impact Assessment Study, Groundwater Modeling, Solid Waste Management, Rainwater Harvesting, Treatment plant Design, EMS, ISO-14000 and ISO-9000.
environmental engineer, specializing in Air pollution with strong knowledge in computing
An enthusiastic environmental engineer seeking challenging position to make a remarkable change in the ecosystem.
B.E.(Civil Engg.)+M.Tech.(Environmental Engg.)+1 Yr Exp in Construction Field
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   [ 23 ]   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com