Resume - I&C Specialist with 20 yrs experience, Navy Sub Vet, PLC/DCS and project managem...

Misco Jobs

Resume #65906

CONTACT INFORMATION:
View contact information...

Objective

To obtain a position as an instrumentation and control systems technician

Work Experience

Timec Inc. Vallejo Ca. Feb. 2007- Present
Instrumentation and CEMS Technician

1. Working at Conaco Phillips Refinery troubleshoot and maintain CEMS emissions analyzers, all refinery instrumentation including Rosemount
3051 smart transmitters, level, temperature,pressure and flow instruments. Perform calibration to ISA and NIST standards.Acting as an I&C
specialist train and mentor other technicians.Validate 3051 and modbus/fieldbus controls loops using Hart 375. While plant I&C supervisor is absent took his position and supervised seven other technicians.
Took and passed N.C.C.E.R. Level 5 I&E test during this period.

Caltrol Emerson Process Controls, Hawaii /El Segundo Ca. Oct. 2006-Feb. 2007
Field Service Specialist Reliability Analyst

Provide technical support in plant instrumentation for wastewater facilities, power plants and refineries in the Hawaiian Islands and at the Chevron El Segundo refinery. Provide design analysis and MOC's to address problem areas. Supervise contractors in design rework and installation. Troubleshoot, install and repair a wide variety of analytical instrumentation including VFD.s, emissions analyzers, lab equipment, and CEMS systems according to CFR 60/75 Provide startup assistance and loop calibration and certification. Calibrate various types of flow, temperature and pressure transmitters. Install and calibrate Limitorque MOV.s, and Fisher control valves. Provide design and technical support after hours for various refinery shipping terminals. Train personnel in valve maintenance and tuning. Provide support for Honolulu wastewater plant upgrade to Rosemount 3051 field bus transmitters. Calibrate and tune PID and various control loops to DCS and SCADA.Train other CEMS techs in gas analysis principle, CEMS troubleshooting procedures and analysis. Used Passport, Maximo, and MP3 work order systems.

Napa Sanitation District Napa Ca. Dec. 2003 - Dec 2006
I/C Maintenance Specialist

Maintain wastewater treatment plant instrumentation and electrical controls. Maintain pump station VFD.s, PLC.s, and remote telemetry RTU's. Calibrate plant analyzers including, PH, ORP, Turbidity and Conductivity Analyzers, CEMS/NOX/Oxygen and GCMS. Supervise and schedule maintenance contracts, provide direct oversight of contractors and plant operations staff on analyzer maintenance and calibrations. Submit monthly emissions compliance reports to the applicable state and federal agencies. Maintain Factory link SCADA and Rugid remote I/O telemetry that interface with pump station level, station controls or alarms. Maintain, and calibrate all flow, pressure and temperature transmitters to NIST standards. Maintain accurate calibration database. Perform yearly state mandated mag flow-meter calibrations. Maintain protocol 1 and 2 calibration gases to EPA and CFR 60/75 standards. Set up and program HMI interfaces, smart transmitters, and field bus devices using the Rosemount 375. Maintain digester Waukesha Cogen engine controls and emissions analyzer. Rebuild and calibrate Fisher control valves and Rotork MOV.s. Provide rotating 24/7 on call support.
Supervised plant staff in the correct methodology for calibrating and reporting for state and BAAQMD plant compliance analyzers Acted as I/E supervisor during primary supervisor's absence.

Foster Wheeler Corp. Martinez Ca. Oct. 2001. Nov. 2003
Senior Instrument Technician

Maintain GE Frame 5 Gas Turbines. Calibrate, troubleshoot or repair plant instrumentation and electrical control systems. This included all systems and sub-systems hydraulic, pneumatic, or electronic. Maintain CEMS Cirrus PAI emissions monitoring system. Perform monthly backup of DAHS and file. Prepare and submit compliance reports to state agencies. Troubleshoot, program and maintain a Bailey INFI 90 DCS and Modicon PLC controls. During turbine outages calibrate all field devices associated with turbine control, providing written calibration reports, documenting accuracy according to IAS, NIST and ISO 9002 standards. Supervise staff in correct monitoring of NO, NOX emission monitoring and data acquisition analyzers according to CFR 60/75 standards. Maintain plant LEL and explosives monitoring MSA analyzers. Supervise all plant control valve and actuator maintenance, order and maintain Fisher parts inventory. Maintain all plant safety equipment including portable gas detectors, fixed gas detectors and confined space entry equipment and rescue devices. Trained in confined space entry and rescue.

Central Contra Costa Sanitary Dist Martinez Ca. June 1996. Sept. 2001
Senior Instrument Technician

Maintain wastewater treatment plant electrical and instrumentation systems. This included plant CEMS analyzers, PH, Opacity, conductivity, turbidity and resistivity analyzers. Troubleshoot DI water and filtration plant. Troubleshoot 480 3 phase motors and controls including 200-600 HP VFD's. Design and implement new instrumentation control schemes. Implement plant wide PM schedules and provide improvements to promote greater reliability and equipment performance. Worked rotating on call for emergencies. Maintain Cleaver Brooks boilers and waste heat boiler controls. Rebuilt plant control valves. Maintained plant air and gas compressors.Maintained waste heat boilers, Solar gas turbine and cleaver brooks boilers.Maintained plant calibration standards to NIST and ISO standards. Maintained protocol calibration gas standards. Led continuous improvement teams plant wide, performed process evaluations. Provided agter hours on call support.

Education

Tullahoma High-Tullahoma, TN.
Graduate

U.S. Navy 1976-1982
Graduated Basic and Advanced Instrumentation Schools

Qualified USS Benjiman Franklin SSBN 640 and USS Dace SSN 607 Nuclear Powered Submarines
Attended numerous technical schools during crew off periods

California Water and Environmental Association
Attained I/E Technical Certification Level 2

Trained CEMS/DAHS CFR.s 60/75 Cirrus / PAI
Certified on Factory Link S.C.A.D.A.
Member confined space rescue team.
CPR and First Aid Certified
BATC Certified. Respirator certified.
SCBA certified and SCUBA certified
NCCER level 5 certification
Professional Memberships

California Waste Water and Environmental Association, Instrument
Society of America, ASHRAE. Submarine Veterans Society-USSVI
Hobbies Sailing, diving, camping, fishing and church

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 851 to 900 of 2392)

Go to Search Parameters...

Brief Description

I am having more than 16 years experience in secretarial field, out of which 8 years in U.A.E. only.

I have completed my graduation with microbiology subject and also completed my laboratory technician course from government hospital.

Expertise in Environmental Monitoring, Compliance and Assessment issues.

• Having two years of experience in engineering consultancy. Have a vision to quickly identify and understand the business benefits of new technologies. • Strong computational, analytical problem solving, and design skills.

I am civil engineer, Msc with 2 years of experience. My topics are hydrology and groundwater modeling. Excelent knowledge in GIS, Excel, Word, Visual Basic, Matlab, Photoshop and Dreamweaver.

Graduate Engineer with 1.5 years professional experience. Degree in Civil Engineering. Masters Degree in Water & Environmental Engineering.

Physical oceanographer with two year experience

Recent graduate with an MSc in Environmental Studies (Environmental Management Systems) and a BA(Hons) in European Business Studies. 1.5 years experience in Business Development in Latin America / working for survey company offshore in North Sea.

MSc (Mech Eng). Project Mngmt - waste, power, steel. Currently working in China (6 years), have previously worked in Netherlands, England, Canada, Germany. Currently Project Director, responsible for multi-million $ projects. languages fluent Dutch, English, German, good French, basic Chinese

Diploma In Mechancial Engineering+NEBOSH Level-3+Post Diploma In Industrial safety Management+Environment, Health and Safety Management Specialist Certification course from NASP of USA/14 years experience in Oil&Gas as HSE Advisor/Engineer/Officer/coordinator/

I have been working as a cook for many years now and I possess over 25 years of experiences in the domain. Just to give you a brief idea, I worked as a cook for over ten years in a bush camp with over 40 people to my charge (for treeplanters, hunting and fishing resort and for a Mining Exploration

Qualified Fitter and Turner / metal machinist

Welding, Cutting and Fitting Structural Steel, GMAW,FCAW, SMAW ALL POSITIONS

Environmental Health & Safety

Hardware systems engineer (Electrical Engineering, Hardware Design, Hardware/Software Testing, Hardware/Software Troubleshooting)

Experienced Project Management Professional (PMP) looking for a Project Manager position with your professional organization

Mechanical Engineer with five years extensive expereience in the field of maintenance for a process plants and a hard core production plant.

I have done Masters in Environment Sciences. I have 2 years of experience. I am doing Certificate in GIS programm in Hunter College, City University of NEWYORK.

MS Chemical Engineer With R&D Experience

Overall 3.8 years of IT exp. & nearly 2 years of Non-IT exp. Hands on experience as a Sales Executive with more than 1 year and more than 2.4 years experience as product specialist. Proposal writing, customer specific demo preparation, lead generation, marketing activities

Environmental Engineer, M.S., E.I.T. (Water and Wastewater)

Chemical Engineering graduate with extensive experience in silicate manufacturing, pulp&paper manufacturing and design of wastewater treatment facility components with strong interpersonal skills

Born 20th September 1974

-Staff Representative of Bayelle Credit Union,-Financial Secretary Of Young Struglers Bamenda,Financial Secretary of The CCAST Theatre Troop.

Employment as Water Resources, Environmental Engineer, Land Designer, AutoCAD Designer or ArcGIS Developer

Drilling, completions consultant. Experienced environmental/safety manager/supervisor for the oil/gas industry.

Automation through PLC and SCADA, working as shift in-charge, process in-charge,

Professional training in environmental engineering with exceptional communication and interpersonal skills and a solid background in waste management

RECENT GRADUATE STUDENT (PG.Dip.Sci, geology) Looking for internship or full employment in Hydrogeology/Environmental/investigation/geophyiscs

5 years of progressively responsible experience in the environmental consulting field including the interpretation of regulations, development of operating practical strategies and management of consultant input.

OBJECTIVE An engineering position with a dynamic organization dedicated to technical excellence with an opportunity to apply and expand my engineering skills EDUCATIONAL QUALIFICATIONS Ø Master of Engineering (Chemical Engineering) Lamar University, Beaumont, TX GPA: 3.8/4.0

engineer working as a Program Officer with USAID. Graduated from Jordan University for Science and Technology /Civil Engineering Department, with a Major in Water Resources and Environmental Engineering.

Recent graduate with BS in geology from UC Davis.

To obtain a position in a growing company, utilizing skills in customer service, team leadership and operations to ensure quality of product, timeliness of delivery and minimization of costs

Science Chemistry graduate with total 18 years experience in petroleum field in Quality control & operations. Last 12 years in Gulf countries as Petroleum Inspector- Chemist Surveyor in Marine cargo inspection business.

GA class III wastewater license, 40HR HAZWOPER certified, excellent computer skills, Does have a valid US passport

Looking for offshore 28/28 rig welding job

Scaffold Inspection and Co-ordination

B TECH PULP & PAPER TECHNOLGY

Having more than Eight years of commercial Experience. Good exposure to all procedures and process of computerised Financial Accounting. Taking care & Maintenance of Computer Hardware.

B.Com (Bachelor Of Commerce), Diploma in Software, Accounting

Environmental Advisor with experience in environmental compliance, monitoring, reporting and rehabilitation. I have fulfilled both technical and advisory roles as an environmental professional in the mining industry of Western Australia and South Australia.

To work in an independent initiative or team with my education in Environmental Science, experience as an Environmental Consultant, Chemist and exposure to public relations and customer service.

Information Manager, Federation of Indian Chambers of Commerce and Industry (FICCI), Environmental Information Center (EIC), New Delhi, since last 2 years

Planning officer

I am a recent graduate with a bachelors of arts degree in Anthropology. My areas of interest include archeology and ecology. I have worked as a wildlife biologist in Las Vegas, Nevada and would like to explore similar avenues of employment around the Southern Nevada area.

I hold MS degree in Environmental Eng and a BS degree in Civil Eng. I have hands on experience in implementing & leading ISO 14001 EMS, waste management, environmental audits, inspections, monitoring, risk assessments, EIAs, remediation studies, and for the last 6 years working in Oil & Gas industry

Recent graduate of the G.I.S. program at Algonquin College seeking position to utilize my experience and skills as a CAD/GIS Technician.

Diesel Fitter, Welding, Electrical, Pnuematics, Hydraulics, Horizontal and Vertical Boring, Precision machining, Earth moving Equipment, Crushers, Power screens, Fenner boxes, Jaw crushers, Pneumatic, Plumbing.

I&C Specialist with 20 yrs experience, Navy Sub Vet, PLC/DCS and project management

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [ 18 ] 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out