Resume - Highly experienced and qualified Driller/Blaster, having significant management ...

Misco Jobs

Resume #65908

CONTACT INFORMATION:
View contact information...

Employment History

05/2006 – Present
Skelair International Limited
Explosives Supervisor
I am responsible for the day-to-day operations for the various sites that the company operate on, including managing the staff. I am also responsible for the control of the explosives and preparing the Blast Specification Sheets for the shotfirers.
I have responsibility for the Health and Safety obligations and for the all records which we are required to maintain, including stock, etc.
My role with Skelair allows me to further develop my management skills whilst maintaining the high level of technical competence required to work in this industry.
The company operate throughout the UK and my job takes me to various parts of the country.

04/2005 - 05/2006
Rocklift Limited
Driller/Shotfirer (Blaster)
I was responsible for the drill and blast operations and health and safety considerations for a wide range of civil engineering contracts including; Quarries, road cuts (pre-split), pipelines, shafts and tunnels.
I was also responsible for the preparation of the Blast Specifications.
In addition to this, I was responsible for the ordering of stock and the maintenance of appropriate records.
I left this employment to take up an opportunity that enabled me to expand my management responsibilities whilst still maintaining my technical skills.

02/2005 – 04/2005
Albion Drilling Services Limited
Driller/Shotfirer (Blaster)
This was a short term contract, where I was responsible for the Drilling and Blasting operations on a barge and causeway for the Harbour widening and deepening project in Cora Mara, Ireland.
In addition, I was responsible for the drilling crews, movement of explosives and the preparation of blast specifications.

02/1999 - 04/2005
J Fenton & Sons (Contractors) Limited
Shotfirer (Blaster)
I was responsible for the day-to-day drilling, blasting and health and safety operations on a large opencast coal site for Scottish Coal.
Responsibilities also included ordering and control of all stock requisitions.
I also gained extensive experience in the use of a wide range of heavy equipment including: Dump Trucks, Wheel Loading Shovels, Diggers etc.

03/1997 – 02/1999
Rockblast UK Limited
Shotfirer (Blaster)
I was responsible for the drilling and blasting operations on a large opencast site.
Responsibilities also included ordering and control of all stock requisitions.
I also gained extensive experience in the use of a wide range of heavy equipment including: Anfo Mixers Explosive Trucks.

Education/Training

Date

Industry Specific Training Undertaken Organisation

February 2006 Explosives Supervisor Certificate Institute of Explosives Engineering
January 2004 Passport to Safety Safety Pass Alliance Ltd
July 2005 Confined Space Operative Certificate Sibbald Limited
October 1993 Shotfiring Quarry Products Training Council

General

March 2007 Standard First Aid St Andrews Ambulance Association

June 2000 Manual Handling Training Morton Fraser, Health & Safety
Management
December 1994 Fire Training Course Kiddie Thorn Fire Protecti

Drill Rig Handling Experience

Air Rigs: Halco; Holmans; Drillmark; 460; 406; SK25; SK40

Exploration Rigs: Dandos; Griffins; Hycats; Boules 57.

Quarry: D.T.H.

Opencast: Rock rollers

Exploration: Diamond core; Open hole; Casting with Odex; Water, Air and Foam Flush techniques.

References

References, from both employers and satisfied clients, will be supplied on request.

Additional Information

I spent much of my early life in Liberia, West Africa, where my father was a civil engineer. It was here that I gained an interest in drilling, blasting and mining and I spent a great deal of time learning some of the tools of the trade from both my father and other LAMCO colleagues.
I appreciated and enjoyed growing up in a multi-cultural environment and gained an understanding of many customs. This has led to my continued enjoyment of a variety of worldwide destinations and I would be very interested in employment opportunities that facilitated and expanded this.

I am a low handicap golfer and play when I get the opportunity. I also enjoy spending time in my garden. I have recently taken up open water diving. I am PADI registered and keen to further explore this hobby.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1501 to 1550 of 2387)

Go to Search Parameters...

Brief Description

Bachelor Degree in Mechanical (Industry)

30 years experience with structual commercial and residential concrete projects

Qualified fitter and turner,ncr computer and equipment technician, diamond mining expierience, electro mechanical experience. steam turbines and related equipment experience

As an Electrical Engineer with some Experiences and Qualifications, include Instrumentation, PLCs, Control and Automation, High Technology Machineries and Equipmens Applications Skill, Engineering & Project Management, Computer Applications, Communications, and Leadership Skill.

Solid Waste Management, Health, Safety and Environmental Management, Fumigation, Site Inspection, First Aid Service etc.

SALES , MARKETING AND PROPOSALS ENGINEER.

I am a civil engineering technologist with 29 yearsof national\international experience seeking opportunties in construction management, supervision, QA\QC. Work experience includes heavy civil works for mining\process facilities, petrochemical, industrial, commercial\institutional, and municipal

Over 25 years of design and engineering experience; providing design, engineering and management services for a variety of projects and fields. Expertise includes estimating, conceptual and finalized layouts, piping design, instrumentation, process, P&ID development, sizing/specifying/requisitioning

Surveyor, QC, upstream, oil, gas, seismic, geophysical, exploration, production, pipeline, module, construction

Experience interfacing with clients promoting change; past experience in sales and service, multilingual with superior communication skills, engineering degree

Having 5 years experience in mining operation and related management of environment. Also 4 years of experience in Marketing of Earth Moving/Mining Eqpts. Btech Degree in Mining Engineering, PG Diploma in Environmental Management, Also PG Diploma in Business Management

Civil Engineer - Contracts, Cost Estimation, Tendering, Cost Control, Claims & Arbitration

i have under gone series of hands on equipment training at port harcourt refining company,nigeria.

M.S. Geologist. Geophysical skills include Geometrics 24-Channel Seismic Refraction/Reflection, Campus Imager 50 Resistivity, Magnetics, GPR, EM acquisition/analysis. Forward/Inverse spreadsheet model development. Petrographic microscope techniques, thin section analysis, XRD Experience

EIT with educational background in chemical and environmental engineering, Knowledge in waster water and environmental regulations.

I have over 4 years experience in Inside Business Development field / Recruiting. Am most interested to work in Gulf like Oman, Kuwait, Qatar etc...Throughout my Inbound Business Development career / Tele sales. I believe I would good in Market Researching, Market Analysts.

A holder of a BSc Physics and a postgraduate diploma in Land and GIS,I am a geophysicist both by training and experience.I have over one year's experience in ground geophysical surveys specialising in mineral exploration.

NCCCO certified crane/heavy equipment operator and CDL driver

Highly experienced and qualified Driller/Blaster, having significant management responsibility and a detailed knowledge of a wide range of the equipment used in the industry.

Instrumentation Calibration

Exceptional Facility and Construction Management Executive

2+ years exp in telecom field

Bilingual Law Graduate seeking Petroleum Landman Position

Free! Geologist/Engineer with diverse experience, skills, and modern education. 2 Years experience in Africa (2006 -2008) working as Hydrogeologist/Water engineer *(Liberia and Darfur, Sudan).

MAINTENANCE ENGINEER, GAS TURBINE, FITTER

21 years EPC experience Reading and Interpreting Contract Drawings, Defining Project Scope, Creation of EPS/OBS/WBS, Performing Detailed Quantity Surveys, Cost Estimating, Identifying Resource Requirements, CPM Scheduling, Cost/Resource Management & Implementation of ANSI/EIA-748-A EVMS Guidelines.

*Autocad *reading and interpeting ISOs *Measurements While Drilling operation and reporting *Water Analysis *Tree core analysis *Soil Analysis *Interpreting Geological Lithologies (core samples)

Denver Area Geologist

SUMMARY A highly motivated, creative, and versatile individual, who is willing to accept any post in the areas of health, safety, and environment or science. An energetic self-starter with excellent communication, analytical and teamwork skills.

HVAC\Facility Maintenance\Controls

Looking for Electrical power job anywhere.

I'm a 23 years old guy done with his Electronics BS degree with minor study of Biomedical engineering and a 3years experience in this field and I'm going to graduate with my second BS degree in Electrical engineering in February 2008.. I'm looking to be a part of a team in good company..

Highly motivated and result driven maintenance engineer with more than 22years of continuous experience.

Government Contracts Financial Executive

Staff Engineer

Sub: Application for the post of Head (Geotechnical Design)

I will be completeing my degree in June 2005. Geoscience skills include slope stability assessment, geological and geomorphological mapping, risk, hazard and vulnerability assessment, geotechnics, seismology, rock engineering.

17 years in Supply Chain Management

15 Years in Procurement/Shipping/Logistics/Import Export

Computer, Cement Plant, Program (Excel,Word.Power Point,Autocad)G.P.A 3.4,Good Comunication,ect

Presently working as Safety officer at EQUATE Petrochemical company at KUWAIT Since 2006. I have completed bachelor of science in Mathematics , Diploma in Industrial Safety Manegement and other related courses for safety officer

Masters recipient seeking employment

Continous Improvement Engineer / Blackbelt : I am a Six Sigma Academy trained DMAIC BlackBelt. I have a detailed knowledge of DMAIC methodology and 15 years successful practical experience of applying Lean/ Continuous Improvement Techniques in the demanding automotive engineering sector.

Safety fire environment health engineer nebosh

6 months (until Feb 2008) as an Exploration Geologist for a FIFO Pilbara minesite; experience at creating drill proposals, sample logging, result analysis. Experience with GIS software (MapInfo) and have basic modelling skills via Micromine. Graduated Geology BSc Hons Uni of Bristol, UK July 2007.

Diploma Engineer in Petroleum as well as Industrial Safety, possessing good experience in Oil and Gas, HSE Management, Offshore Construction, Fire Fighting, First Aid, MS Office, Driving, Good English, Worked with Multi National Workforce, Emergency Evacuation, HSE Induction, Safety Training, etc.

Free! Senior Mechanical Engineer / Project Engineer

Professional engineer with wide ranging international experience in project, engineering, reliability, business development, sales and commissioning of refinery.

Good communication skills and excellent goals getter. A graduate of Applied Geophysics with hons, from O.A.U, Ife, Osun State, Nigeria. My career objective is to obtain a challenging position in a well structured organization that lays emphasis on excellence, goals achievement and self development.

i am interest to work in construction, site, minning, manufacturing line

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 [ 31 ] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out