Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #66619 next resume »»
CONTACT INFORMATION:
View contact information...

Date of Birth: October 5, 1976
Nationality: Pakistani
Marital Status: Married (Two kids)
Sex: Male

Academic Career
* Ph.D. (Chemical Engineering, 2007) Universiti Teknologi PETRONAS, Malaysia Dissertation "A Study on Enhanced oil recovery (EOR) by surfactants for a Malaysian sandstone reservoir".
* M. Phil (Physical Chemistry, Colloid and Surfactants, 2003) with 3.5 CGPA from Quaid-I-Azam University Islamabad, Pakistan. Dissertation "Surfactants in water treatment to prevent corrosion, scaling and biological growth of cooling towers and boilers".
* M.Sc. (Chemistry, 1998) with 1st division (60% marks) from Bahauddin Zakariya University, Multan, Pakistan. M.Sc. Thesis "Inorganic metal settlement in fuel tanks and their environmental effects for disposal".
* B.Sc. (Physics, Chemistry and Mathematics General, 1996) with 1st division (62% marks) from Govt. College of Science, Faisalabad, Pakistan.
* F.Sc. (Pre-Engineering group, 1993) with 2nd division (52% marks) from Govt. College Shahkot, Sheikhupura, Pakistan,
* Matriculation (Science, 1991): with 1st division (75% marks) from Govt. High School No. 1, Shahkot, Sheikhupura, Pakistan.
Professional Experience:
* Lecturer (2003 - 2005) of Physical Chemistry (Colloid and Surfactants) from 18/04/2003 onwards in the department of chemistry, University of Agriculture, Faisalabad, Pakistan. Supervised 14 M.Sc. dissertations focusing on the areas like corrosion inhibition, micellization, emulsification, adsorption, drug delivery by surfactants, etc.
* Consultant (Part time basis from 2001-2006) Ali Chemical Industries, Faisalabad, Pakistan, for the development of textile auxiliaries including fatty acid based softeners, acrylic acid based thickeners, dispersants, etc.
* One year experience as a Sales Manager (Full time) with Hawk Eye Services, Faisalabad-Pakistan, an exclusive dealer of water treatment chemicals of BK Ladenburg, Germany.
* Three and half years of experience of water and wastewater treatment (cooling, boiler, canal, chilled and wastewater of textile, feed and chemical units) with Olympia Chemicals Limited, Pakistan.
* One and half years of experience (part time) with ERDC valley bottles (Himaliya mineral water) Ltd. Islamabad, Pakistan, in the capacity of Quality Control (QC) manager.
Training Courses and Workshops
* "National workshop on quality of drinking water", March 7, 1998, jointly organized by Chemical Society of Pakistan (CSP) and Pakistan Council of Research in Water Resources (PCRWR), Islamabad, Pakistan.
* "Training course on the safety measures in the use of radiation in agriculture and biology", from October 29, 2003 to November 3, 2003 organized by Nuclear Institute for Agriculture and Biology (NIAB), Faisalabad, Pakistan.
* "Research methodology course" from 3rd to 9th January, 2005 organized by Universiti Teknologi PETRONAS, MALAYSIA.
* "Seminar on Biodiesel from Palm Oil Processes, Engineering and Environment Aspects, Market Trends, Chemistry and Production" 21st December, 2005, Organized by EMC Management Centre Sdn. Bhd. and Center of Lipids Engineering & applied Research (CLEAR), Universiti Teknologi Malaysia (UiTM), Pan Pacific Hotel, Kuala Lumpur, Malaysia.
* "2nd International R&D forum on oil and gas" Organized by PETRONAS and Universiti Teknologi PETRONAS, 6-7th December, 2006, Kuala Lumpur Convention Center, Kuala Lumpur, Malaysia.
Publications
* M. Nadeem, C. Rangkuti, K. Anuar, I. B. Tan, M. R. U. Haq, S. S. Shah "Diesel Engine Performance and Emission Evaluation Using Emulsified Fuels Stabilized by Conventional and Gemini Surfactants" Vol. 85/14-15, pp: 2111-2119,Fuel, 2006.
* M. Nadeem, I. B. tan, M. R. U. Haq, S. A. Shahid, S. S. shah, G. McKay "Sorption of Lead from aqueous solution by Chickpea leaves, stems and fruit peelings", Adsorption Science and Technology, Vol. 24, No. 3, pp 269-282, 2006.
* M. Nadeem, A. Mahmood, S.A. Shahid, S.S. Shah, A.M. Khalid, G. McKay, Sorption of Lead from Aqueous Solution by Chemically Modified Carbon Adsorbents, Journal of Hazardous Materials, B138, pp-604–613, 2006.
* M. Nadeem, M. R. U. Haq, G. McKay "Sorption of zinc from aqueous solution by surfactants modified carbon adsorbents" In revision process, Journal of Hazardous Materials, Manuscript No. HAZMAT-D-05-00372.
* F. Ahmad, P. Melor and M. Nadeem "An Experimental Evaluation of Structure-Property Relations in Rigid Polyurethane Foams (PUFs)" submitted to Journal of Applied Polymer Science, Manuscript No. APP-2007-04-1141.
* M. Nadeem, S. Ahmad, M. R. U. Haq "Sorption of Cadmium from Aqueous Solutions by Surfactant-modified Carbon Adsorbents" In revision process, Journal of Hazardous Materials, Manuscript No. HAZMAT-D-05-00386.
* M. Nadeem, C. Rangkuti, K. Anuar, I. B. Tan "Performance and exhaust emission evaluation of a diesel engine using emulsified fuel and biodiesel from rice bran oil" In revision process, Energy Conversion and Management, Manuscript No. ECM-D-05-00662.
* M. A. Malana, M. Nadeem, S. S. Naqvi and S. N. Sarwar "Inorganic metal settlement in fuel tanks and their environmental effects for disposal" Science Technology and Development: 19 (2): 32 – 35, 2000.
* M. Yaseen, M. Nadeem and S. Hussain "Investigating the effectiveness of micropower foliar spray on growth and yield of different crops" Pakistan journal of life and social sciences: 2(2): 156-158, 2004.
* M. Nadeem, Raziya Nadeem, Habib Ullah Nadeem and Syed Sakhawat Shah "Accumulation of lead and cadmium in different organs of chicken" Pakistan Journal of Scientific Research: 57 (1-2), 71-76, 2005.
* S. Gill, R. Nadeem, B. Saleem, M. Nadeem and K.Rehman "Removal of Pb (II) from aqueous solutions by chickpea" Indus Journal of Biological Sciences, 2(3):362-366, 2005.
* Sami Ullah, M. Nadeem, S. A. Shahid and A. A. Qidwai "Study of corrosion inhibition of stainless steel-410 by thiourea and surfactants in sulfuric acid" Indus Journal of Biological Sciences, 2(4), 536-544, 2005.
* Shaukat Ali Shahid, M. Sarfaraz, M. Z. Hanif, M. I. Shakir, A. A. Qidwai, M. Nadeem and S. Ullah "Comparative performance study of single acrylic sheet covered and double glass sheet covered dehydrator" Indus Journal of Biological Sciences, 2(4), 549-555, 2005.
* Shaukat Ali Shahid, M. Rani, M. Z. Hanif, M. I. Shakir, A. A. Qidwai, M. Nadeem and S. Ullah "Fabrication and performance study of solar dehydrator fitted with glass reflector" Indus Journal of Biological Sciences, 2(4), 525-531, 2005.
* Shaukat Ali Shahid, M. Z. Hanif, M. I. Shakir, M. Nadeem, A. A. Qidwai, and S. Ullah "Fabrication and performance study of portable solar food oven" Indus Journal of Biological Sciences, 2(4), 571-577, 2005.
* Shaukat Ali Shahid, M. Hassan, M. I. Shakir, A. A. Qidwai, M. Nadeem and S. Ullah "Design, construction and performance study of electric cum solar oven" Indus Journal of Biological Sciences, 2(4), 508-514, 2005.
Accepted Abstracts/Conference Presentations
* M. Nadeem, Asif Bashir and S. S. Shah, (2002) "Dyestuff removal from effluents of a textile industry by flocculants to reduce COD and BOD", 3rd international and 13th national chemistry conference of Chemical Society of Pakistan (CSP), Karachi Pakistan, December 2002.
* Asif Bashir, M. Nadeem and S. S. Shah, (2002) "Synthesis, characterization and inhibition of renal calculi (Kidney stones): in vitro study" 3rd international and 13th national chemistry conference of Chemical Society of Pakistan (CSP), Karachi Pakistan, December 2002.
* M. Nadeem, S. S. Shah and G. Mustafa, (2003) "Limestone in flue gas desulfurization for coal fired boilers", 4th international and 14th national chemistry conference of Chemical Society of Pakistan (CSP), Lahore Pakistan, December 2003.
* M. Nadeem and S. S. Shah, (2003) "Surfactants in water treatment to prevent corrosion, scaling and biological growth in cooling towers and boilers", 4th international and 14th national chemistry conference of Chemical Society of Pakistan (CSP), Lahore Pakistan, December 2003.
* Raziya Nadeem and M. Nadeem, (2003) "Monitoring of lead and cadmium in textile effluents and their effect on surroundings" International Conference on Environmental Challenges, Peshawar University, Peshawar Pakistan, 11 – 13th March 2003.
* Raziya Nadeem and M. Nadeem, (2003) "Physiochemical analysis and remediation of textile effluents" International Conference on Environmental Challenges, Peshawar University, Peshawar Pakistan, 11 – 13th March 2003.
* M. Nadeem, Anwar, F., and Sultana, R., (2004) Analytical characterization of Hemp (Cannabis sativa) seed oil indigenous to Pakistan, Published at 16 IPLS, Budapest, Hungary 1-4, June 2004, Abstract Book 91.
* F. Anwar, M. Nadeem, and Ashraf, M., (2004): Inter-provenance Variation in the Composition of Moringa oleifera Oilseeds from Pakistan, Presented at 43rd JOCS Annual Meeting, November 1-2, Osaka Japan. Abstract Book, P.74.
* M. Nadeem, Isa Bin Tan (2006): A review: Drug delivery by surfactants, Accepted for poster presentation, NSTI Nanotech, Hynes Convention Centre, May 7-11, Boston, Massachusetts, USA.
* M. Nadeem, Isa Bin Tan and Sumaeth Chavadej (2006): Industrial applications of surfactants, Accepted for oral presentation, Chemistry for Human Needs in Developing Countries, Egyptian Chemical Society, Cairo, 11-14 September, Egypt.
* Muhammad Nadeem, M. R. U. Haq, S. R. M. Kuttay (2006): Selective Heavy Metal Sorption from Aqueous Solution by Acid, Base and Surfactant Treated Rice Bran: Kinetic and Thermodynamic Investigations, Accepted for poster presentation, Chemistry for Human Needs in Developing Countries, Egyptian Chemical Society, Cairo, Egypt.
* F. Ahmad, M. Nadeem, M. I. Shakir, P. S. Melor (2006): Fabrication and Characterization of Nano-Sized Carbon Fiber Reinforced Copper Matrix Composites, Accepted for oral presentation, 5th Asian-Australasian Conference on Composite Materials (ACCM-5) 27-30 November, Hong Kong.
* M. Nadeem, I. B. Tan (2006): Comparative Study Of Mass Transfer In Oil-Water-Oil Multiple Emulsions Stabilized by Conventional and Gemini Surfactants By Differential Scanning Calorimetry, Accepted for Oral Presentation At 19th International IUPAC Conference on Chemical Thermodynamics, July 30- August 4, Boulder Colorado, USA.
* M. Nadeem, I. B. Tan (2006): A Review: Surfactants in Food and Pharmaceuticals, reference P088, Accepted for poster presentation, Food Colloids: Self Assembly and Materials Science, 23 – 26 April, Montreux, Switzerland.
* M. Nadeem, I. B. Tan (2006): A Review: Industrial applications of Conventional and Gemini surfactants, reference 1699, Accepted for poster presentation, Materials and Nano-materials for devices, 1st European Chemistry Congress, 27 – 31 August, Budapest, Hungary.
* M. Nadeem, I. B. Tan (2006): Role of non-ionic lipid-hydrophilic surfactants on the stability of the water emulsions of selected drugs, Page no. 305 of abstract book from 17th International Symposium on Plant Lipids Michigan State University July 16 - 21.
* M. Nadeem, I.B. Tan (2006) A review: Drug delivery by surfactants, http://www.nsti.org/Nanotech2006/showabstract.html?absno=1185.
* M. Nadeem, S.S. Shah (2007) Micellar-enhanced ultrafiltration in the removal of heavy metals from aqueous solution using conventional and non-conventional surfactants. 12th Asian Chemical Congress (ACC), August 23 – 25, Putra World Trade Centre, Malaysia.
* S.S. Shah, M. Nadeem (2007) Surfactants modified activated carbon for the removal of dieldrin from aqueous solution, The 12th International Conference of the Pacific Basin Consortium for Environment & Health Sciences, 26 – 29, October, Peking University, Beijing, China.
International Recognition
* Publication of biography by "Who is Who in Science and Engineering" (2007) Marquis Publishers, USA.
Main Areas of Research
The domain of surfactant's science is considered as one of the most interdisciplinary areas of modern science and technology. Surfactants are amphipathic substances with lyophlic and lyophobic groups making them capable of adsorbing at the interfaces between liquids, solids and gases. They are capable to form self-associated clusters, which normally lead to organized molecular assemblies/aggregates, monolayers, micelles, vesicles, liposomes and membranes. Their capability of reducing surface tension allows them to mix or disperse readily. The engineering applications of surfactants range from agricultural sprays to oil recovery including areas such as catalysis, coatings, dispersions, emulsions, electronics, floatation of minerals and lubrication, etc. They are being widely used in personal care products because of useful functional properties, the most important of which are emulsification, stabilisation, dispersion, gelling, skin penetration, etc. Among biomedical applications, uses of surfactants extend from anesthesiology to zoology covering artificial implants, biomembranes, biolubrication, lipoproteins, opthalmogy, pharmaceuticals and pharmacology. In view of these important uses and unique properties, namely, ultralow interfacial tension, large interfacial area, thermodynamic stability and the ability to solubilize immiscible liquids, they have found multifarious applications in cosmetics. My major areas of research interest include; production of economical textile auxiliaries through micellar catalysis, emulsion polymerization, etc, production and evaluation of biodiesel from renewable resources, evaluation of cheap biosorbents for the removal and recovery of hazardous materials from industrial effluents, utilization of surfactants for industrial applications like detergency, corrosion, scale, biological growth inhibition, environmental remediation using surfactant's modified adsorbents, production, characterization of new materials including nano-composites, conducting polymers, micro emulsions, enhanced oil recovery and drug delivery by surfactants, etc. The research is mainly focused on the investigation of phase behavior, adsorption, micellization, and characterization of the end products using conventional and non-conventional (gemini, non migratory, etc) surfactants. Different techniques including Tensiometer, conductivity meter, FT-IR, GC-MS, AAS, UV/Visible, SEM, STM, etc and state of the art are being executed.

Reviewer of National/International Journals
Periodically reviewed few papers for the Journal of Membrane Science and Technology, Bioorganic and Medicinal Chemistry, Chemical Engineering Journal, Journal of Environmental Management, Desalination, Bioresource Technology, Cell Biology International, Journal of Hazardous Materials by ELSEVIER, Colloid and Polymer Science by Springer, American Society for Mechanical Engineers (ASME), Bio Resources by NC State University, African Journal of Biotechnology and some of local journals from Pakistan.
Invited Lectures
* "Indigenous Environmental Problems and their Remediation" COMPETE, Faisalabad, Organized by Environment Protection Agency (EPA) of Pakistan.
* "Corrosion Inhibition by Surfactants" arranged by Chemical Engineering Department, Universiti Teknologi PETRONAS, MALAYSIA.
* "Enhanced Oil Recovery by Surfactants" arranged by Chemical Engineering Department, Universiti Teknologi PETRONAS, MALAYSIA.
* "Industrial Applications of Surfactants" arranged by Chemical Engineering Department, Universiti Teknologi PETRONAS, MALAYSIA.
Masters Grading List

M. Sc. (Chemistry) Part -I Obtained Marks
Physical Chemistry (Theory) 57/100
Inorganic Chemistry (Theory) 52/100
Organic Chemistry (Theory) 34/100
Analytical Chemistry (Theory) 47/75
Mathematics 41/50
Physical Chemistry (Practical) 43/100
Inorganic Chemistry (Practical) 48/100
Organic Chemistry (Practical) 52/100
M. Sc. (Specialization in Physical Chemistry) Part -II
Advanced Physical Chemistry (Special) 76/100
Advanced Physical Chemistry (Additional) 68/100
Advanced Physical Chemistry (Practical) 67/100
Advanced Inorganic Chemistry (Special) 64/100
Advanced Inorganic Chemistry (Practical) 68/100
Total (Part-I & II) 720/1200
M. Phil. (Physical Chemistry)
Solution Chemistry 58/100
Electrode Processes 55/100
Quantum Chemistry 50/100
Molecular Spectroscopy 57/100
Chemical Kinetics 65/100
Solid Sate and Semi Conductors 55/100
Surface and Colloidal Chemistry 83/100
Special Topics in Advanced Physical Chemistry 50/100
Dissertation
Surfactants in water treatment to prevent corrosion, scaling and biological growth in cooling towers and boilers 85/100
CGPA 3.5

References
Will be provided

View contact information...
«« previous resume next resume »»
Search Results (Resumes 701 to 750 of 2383)Go to Search Parameters...
Brief Description
To obtain a position in the field of Environmental Engineering and its related fields that will utilize and nurture my skills and knowledge.
Seeking a position that offers opportunity for advancement in fields related to environmental engineering
My background qualifications are in engineering and environmental law, and my experience to date relates to international environmental policy within a broad context (i.e. for the World Bank and UNEP in Thailand).
Objective: A position as a chemist or a chemical engineer. SUMMARY OF QUALIFICATIONS - M.S. in Chemical Engineering, B.S. in Chemistry. - Five years R & D experience in pharmaceutical industry. - Specialty research in Adhesive Bonding. - Strong problem solving abilities.
SAP - SD Certified as solution Consultant with 5 years experience and SAP R/3 6.0
8 years email administration.
I am a person with leadership qualities and easy going. I have good English level; ability to deal with hard situations and I am adaptable; I have enthusiasm and attitude to learn and to work.I have some experience in Risk because of my degree work: Formulation of Emergencies Plan for National Natur
Fourteen years of experience in cost control, estimating, planning & scheduling, financial analysis, procurement, commercial negotiation and contract administration. Five years of experience in management positions.
Geology, Management, Biostratigraphy, Sequence Stratigraphy, Palynology, Paleobotany, Basin Analysis, Carbonate, Clastic Sedimentology, Seismic, Geochemical, Geophysical, Exploration, Operations
RF Engineer in CDMA with exp of 8 months (B Tech In Electonics and Communication)
To extend the existing water distribution network to supply water to properties and to identify critical bottlenecks in the distribution system,„I To design and implement the new network in the demo zone for pressured and uninterrupted flow of water supply for 24 hours in the demo zone,
Communication Engineer
MBA, 100% Spanish and English.
Executive management, business development, supply chain, IT, embeded system
Labview Programmer
I am in search of employment overseas in the water or wastewater field. I do speak some Spanish
From August 1998, I am working as a Geologist. At present I am fully involved as Hydro-Geologist. As a manager of Well Logging Unit for Gujarat State I conduct geophysical Logging for Groundwater, prepare Lithologs and core logs. I had also worked on GIS software and GPS systems.
Motivated professional with excellent record of academic achievements, strong analytical and research experience. Strong awareness of complex socio-economic, cultural and ecological issues; able to adapt quickly in new and changing environments.
Continue acting in pipeline engineering construction and assembly independent of the site job and challenging new experiences.
Recent Grad _ Entry Level
Management
maintenence engineer
Microsoft enterprises systems, Great Plain ERP, SharePoint services SQL Server 7\2K\2k5, Exchange Server 2k\2k4, ISA Server 2k\2k4, IIS 6.0, Manufacturing (Planning ERP, Execution MES, SCADA, Process Controlling) Active Directory, DNS, Windows Servers, Desktop, POS, PDA NT\2K\2k3\XP\Vista VBA\Access
Experienced professional interested to work with oil companies.
• Leading a group of experts: - Environmental Health staff, Services staff including Hospital Staff and 440 contractor staff
I am hard working and highly motivated and enthusiastic about a career in the offshore industry, reliable and trustworthy, I work well as part of a team and can work well on my own. Available to start work immediately.
Typing,Computer Literate
Highly motivated BSc in Environmental Sciences and Management fresh graduate with strong analytical, communication and leadership skills.
Mechanical Eng., designing ACAD
Job Title : Service, Erection and Maintenance Engineer - Maintenance & Trouble shooting skills - Installation, Repair, commissioning and STart Up of Boilers. Stron Communication Skills. Training Courses
Working as a Engineer-HVAC in Jurong consultants (India) Pvt. Ltd., around 2yrs, orked as a designer-HVAC at DVP Consulting Pvt. Ltd., Ban galore. 3years. And worked as auto Draftsman/Engineer Around 2.5 Yrs.
I would like to work as an Environmental Geologist. I have no work experience as a new graduate and need companies that are willing to develop their employees.
Self motivated Environmental professional. Integrate technical knowledge with management skill to solve problems.
expertise in environmental water policy and economic background with relevant experience working. At a national and Mediterranean level I worked at the Ministry of Water and Irrigation in Jordan as an advisor and assistant to the Minister Dr Hazim El-Naser.
Mechanical engineer, looking for a job in Central Asia. Willing to work as junior engineer at low salary to gain experience in any engineering discipline.
Geologist with experience in environmental consulting
Sub.: Application for the post of Production Engr. / Food Tech
ACADEMIC DETAILS Academic qualification: BE in Environmental Engineering. College: Vidya Vardhaka College of Engineering, Mysore. Class Obtained: First Class with Distinction. (77.17%)
management experience of a wide variety of environmental projects including international HSEMS, development and implementation of environmental management systems, development and provision of audits and training courses.
I am a recent college graduate that is looking to share innovative thoughts about various fundamental environmental issues.
I have graduated Master degree from National University of Singapore. I have some experience working in environmental and health aspect. I am looking for a new job now
Work on all other electrical and electronics work with telecom power related issuse.
HSE Manager
Pharmacy graduate from Mumbai university having about 4 years of work experience in pharma industry as a analyst.
Design, Manufacturing & maintenance of injection moulds
Master marketer, business developer, facilities and maintenance manager, technical engineering savvy, director level International experience of 28 years
Safety and Health Professional with 35 years experience
I have completed my 4 year degree in mechanical engineering from Bangalore University. I was working as an maintanance engg at L&T, Mysore stone ware pipes & pottrates, then in fabrication line.
Highly experienced Planning Enginner (scheduler) in the Nuclear sector. Very computer literate and from a unique and enviable IT/Engineering background. A deep background in projects and technology exploitation. Very well regarded and likable.
To impart the synthetic vision to young intellectuals by which they can appreciate the relationship between ENVIRONMENT & ETHICS and give meaningful leadership to the society.
1   2   3   4   5   6   7   8   9   10   11   12   13   14   [ 15 ]   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48  
Seach Parameters

Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com