Resume - Experienced chemist with over ten years working in EOR/IOR projects associated t...

Misco Jobs

Resume #68383

CONTACT INFORMATION:
View contact information...

KEY COMPETENCIES

*Petroleum Laboratory management
*Setting up, adjusting and operating laboratory equipments
*Control processes in laboratory and bench scale
*Special and conventional core analysis. Coreflooding Studies
*Water/Gas and chemical flooding to IOR/EOR projects.
*Formation Damage and Heavy oil enhancing
*Strong Knowledge of Organic Chemistry
*Chemical formulations development
*Physical chemistry of polymers & surfactants
*Technical support in onshore/offshore operations
*Field/plant production fluids Samplings
*Handling/Treatment/Separation of oil/water samples.
*Knowledge of standards ISO-9000/ISO-14000
*Promotion of chemical products.
*QC/ Chemical analysis by ASTM/API Methods, UV-Visible spectrometry and HPLC.

PROFESIONAL EXPERIENCE

2005 –2007 (Present) Neotechnology, C.A, Venezuela – Germany
Laboratory & Field Chemist

* Coordinate and perform laboratory studies to evaluate new technologies to enhance oil & gas production. Evaluation of chemical formulations to sand control involving the following technical parameters: Porosity, Permeability retention, pore volume optimization, injection rate, proppant types, temperatures, pore pressure, initial fluid saturation, confinement pressure, fluids compatibility in aqueous and non aqueous systems, chemical preflush, among others. Treatment and separation of oil water samples. Fluids rheology
* Develop rock specimens under P/T controlled conditions to evaluate curing time, type of chemical formulations and evaluate mechanical properties through UCS and PLT.
* Evaluate gelling time in static and dynamic conditions using different starters of polymerization.
* Design and set up equipment to evaluate different processes at reservoir conditions. Maintenance and calibration of laboratory equipments. Calibration gauges, transducers, high-pressure syringe pumps.
* Serve as a sale representative promoting chemical products
* Design of methodologies -standard operating procedures (SOPs)-state of the art studies

2003/2005 Universidad Central de Venezuela, Petroleum engineering faculty.
Technical Support Chemist

* Responsible for the reactivation of the PVT laboratory. Maintenance and calibration of PVT equipments: Blind liquid phase PVT Cell and volatile/condensate fluids cell. (Compressibility up to 8000 psi). Calibration of rolling ball and Brookfield viscosimeters
* Served as technical support to undergraduate students & technicians in the reservoir rock and fluid properties laboratories from petroleum engineering faculty. Water/sediments, air/water permeability, porosity, fluids saturation, capillary pressure and ASTM/API methods.
* Worked in an experimental methodology to eliminate phenol from phenolic wastewater effluents of a naftenic acid plant by a laboratory ozonation system.

1989/2003 Research Centre of PDVSA-INTEVEP, Venezuela:
Advanced professional II; Activity Leader for La Salina project and Professional I, Laboratory and activity coordinator for Lagomar project. Offshore projects. 1996/2002,

* Designed, organized and performed laboratory activities to establish alkali-surfactant-polymer (ASP) formulations to the reservoirs LL-03 and VLA 6/9/21, involving fluids characterization, conventional and special core studies. Fluids studies involved: phase behavior to oil-water-surfactant systems, optimum polymer concentration, critical micelar concentration and ultra low interfacial tension to surfactants. Rheological behavior, molecular weight effects, thermal stability (bottle tests, anaerobic chamber), fluids compatibility, solubility, interfacial phenomena and compatibility of polyelectrolytes and additives in formation, injection and soft water. Evaluated Antiscalants. Conducted Coretestings and Fluid-rock interactions tests: chemical retention, Absolute and relative permeability, capillary pressure, wettability, porosity, pore volume and oil recovery.
* Studied the surfactant/polymer interactions by rheology and tensiometry.
* Contributed to the technological risk analysis for an ASP full field application and worked as a part of a team to generate a pilot design to determine the effect of gas lift on the produced fluids and the effect of the transport of injected blends on the viscosity at the experimental well "CEPRO"
* Coordinated and oversaw the quality control and preparation of whole slug of ASP injected in the well 1325, during the pilot test "SWCT" to evaluate the efficiency of ASP process in Lagomar field (offshore). On-site inspection of the barge facilities to evaluate mixers and tanks integrity. Installation of equipments required to monitor and ensure the quality of the polymer and surfactant blends, previous the pilot test
* Performed water/oil separation in the field using portable separator and demulsifiers. Oil and water (Brine) tests by ASTM, API and SMWW methods.
* Analyzed asphaltenes content, water and sediment content in crude oil by (ASTM 4007-02, API MPMS Ch. 10.3/10.2), density, specific and API gravity, carbonates and bicarbonates in brines (Alkalinity), chlorides, total dissolved and total suspended solids in brines.
* Served as a technical support in project "Exploitation and unconventional uses of heavy and extra heavy oils" to demonstrate the cracking and hydrogenation of heavy oil by electrochemical treatment.
* Technical support during the injection and sampling of tracers in the Lagomar field.
* Supported the preparation, mixed and injection of emulsions with heavy oil at the FN-2 well, Furrial field.

Associated Research Technician III (Field technician) to both Projects "Support to the Integrated Studies to the fields: Centrolago (offshore) and El Furrial(onshore)". 1992/1996

* Investigated the fluid-fluid compatibility and fluid-rock compatibility through filtration tests and fines migration studies (critical velocity) on oil free and aged cores and helped scale data to field condition.
* Carried out reactivity tests of heavy oil to activate natural surfactants.
* Sampled oil-water to extract chemical and radioactive tracers to monitor water breakthrough in production wells and sampled H2S at wells of the Furrial field. Designed and improved the laboratory facilities for treatment and separation of oil/water samples containing tracers using demulsifiers, ultrasound and electrical treatment. Collaborated with the risk analysis using the methodology "What IF" to use this process in laboratory.
* Sampled light oil with needles on well head and well pipe (HP&HT) to geochemistry analysis.
* Selected and evaluated HT resistant polymers and its blends with alkali-surfactant for HT reservoirs.

Principal Research Technician, Reservoir Technology Department, 1989/1992

* Set up systems with different types of porous media and handled the tomography technique to evaluate the distribution of fluids inside the cores.
* Performed extra-heavy and heavy oil thermal treatment tests using hydrogen donors, methane, water and steam in static & dynamic conditions. Evaluated the steam injection with solvents on heavy crude oil. Characterized these samples by density, °API, viscosity and thermal analysis.
* Conducted the preparation/injection of polymer/biopolymer solutions in reservoir cores to evaluate flow parameters; injectivity, resistance factor (RF) residual resistance factor (RRF), brine injection, oil recovery and polymer retention, monitoring polymer concentrations by UV-Visible spectrometry and HPLC.

EDUCATION
2000 BS in Chemistry (Technology)
Universidad Central de Venezuela, Caracas, Venezuela

1986 Associated degree in Chemistry
University Institute of Technology Capital Region, Caracas, Venezuela

OTHERS SKILLS
* Microsoft Word, Microsoft PowerPoint, Microsoft Excel, Basic reservoir simulation with STARS
* Languages: Spanish: Mother Tongue/English: Spoken and Written (High Intermediate Level)
* Supervision of small group of professionals and students in laboratory and field work
* Analysis, treatment and purification of gold of mines and jewels. Goal-oriented/Fast learner/Innovative
* Data/results interpretation and preparation of progress/final reports
* International exposure during technical visit to partners in North America and Europe
* Co-author of international technical publications in chemical flooding (EOR)

NOTICE PERIOD: One month CURRENT LOCATION: Venezuela

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1701 to 1750 of 2396)

Go to Search Parameters...

Brief Description

I did BE Mech in 1999. I've Five years Experience in Die Casting field. Experience in Design and Manufacturing of Pdc dies. My skill is to prepare the fmea meeting of designing area with checklist presentation ie. functional & design related points and then all the drgs are submitted to Mfg team.

BS EE, Program/Project Management, Business Development, MS Project, Oracle Financial Analyzer, Data-Voice Value Added Service projects & business, GSM 900 infrastructure (Ericsson) deep knowledge, Wireless and Service Engineering Planning, MS Office, IP Networking

A generalist HSE Manager with experience in oil & gas industry at several international locations with HES / Project Engineering / Operations background. HES Program development focus. Culturally sensitive.

More than 4 years experience in Human Resources specializing in Talent Acquisition

Researched and implemented a 32 X 32 CMOS Image sensor using ‘Cadence cmosp18 tech. Implemented the schematic circuit design and layout for Active Pixel Sensors (32 X 32), 32 CDS units and 32 differential amplifier units.

Over 10 years in the environmental industries with planning skills, I currently manage over 20 staff involved in a variety of projects focussing on land management, sustainable land use projects, visitor information, media liaison and implementation of national objectives for federal government.

Experienced chemist with over ten years working in EOR/IOR projects associated to laboratory and field to the oil & Gas industry in Venezuela. Coordinated and used different analytical equipments, methodologies and facilities, following standard procedures of laboratories and operations

Free! I am a Canadian, "Hands-on", Project Manager/Superintendent interested in International work again. My extensive experience is in Heavy/Civil and Oil & Gas Pipeline Construction. I have a reputation for completing on-time, safe and cost-effective projects in various climates and nationalities.

I am an experienced Mechanical Engineer in the field of Design & Welding (IWE) Engineering. I obtained my Dipl-Ing. certificate (equivalent of MSc(Eng.) in Design and Construction of Agricultural and Construction Machinery from the Technical University of Berlin in Germany

Drafter/Designer-Entry Level with some experience

Masters in Mechanical Engineering - 2004, Bachelors in Mechanical Engieering – 2001, Computer awareness:Auto CAD, MS Office, MS Projects, Power Point Presentations; Trained & Certified for Health, Safety & Environment - IOSH

Gas turbine expert, Engineering, Rotating Equipment technician,MechanicalEngineering

Miner/trainer/shift boss assessor

Data manager with over 10 years of experience in the mineral exploration industry providing high quality digital tools, data and information to geoscientists. Extensive experience managing IT projects and services on an international environment. Strong analytical, organizational and technical skill

Fresh Mechatronics Engineering Graduate

Oracle dba, technical support

To obtain a position offering challenging responsibilities in a reputed organization requiring unwavering commitment towards profession and resultantly to become an integral part of the organization.

Java, JSP, Servlet, J2EE, JSTL, SQL, PHP, ASP, XML, HTML

Highly motivated geologist with an Msc in engineering geology based in the UK looking for a growth oriented job in oil and gas industry that will provide me with relevant professional experience. Accustomed to a fast-paced multidisciplinary environment where deadlines are a priority. Good organisati

Can work with computers, good communication skills, team player, can work under pressure

Bilingual (English and French) Engineer with +13 yrs Petroleum Production, Wellsite and Operations experience in Oil & Gas and +3 yrs in Construction and Environmental work. Worked for Shell, Vermilion and Maurel & Prom in Africa, Europe and North America. US resident.

Drafting, estimating, typing, computer literate: MSWORD, MSEXCEL, COREL DRAW, AUTOCAD, POWERPOINT, PIPES & PIPES++

Bilingual, Certified PMP and Six Sigma Greenbelt, self-motivated and client-focused Business Systems Analyst with seven years of global experience as well as experience in the Health/Environment, Public, Financial and IT Sectors.

Transport & Logistics Safety (HSE):Road Safety Monitoring, • 3PL Contractors/ Subcontractors pre start up HSE Audits (HSE MS, HSE Plans, Documentation Control, Vehicles Roadworthiness Inspection, Drivers Competency Assessment, Workshop Audit, Transport Routes Survey, etc.)

mind setter for Safety, and condition builder

Internationally Expierenced, First Year MBA, Arizona State University

Precision Millwright, Welder. Turbines, Power Plants, Ethonal Plants, Steel Mill Plants.

A globally-certified procurement professional with extensive Asia-Pacific experience

Value through hard work and performance

Big believer in teamwork, organization and co-operation, have the ability to perform well under pressure, hard worker, able to behave as a leader, manage stress.

I am available for all your open positions regarding my qualifications - Technical/Managerial/Projects positions, throughout Europe/Middle East & Africa.

I have held management/technical positions with the companies listed within my resume for over 20 years specializing in construction, environmental, mining, mineral/material processing and chemical manufacturing businesses. I have significant experience in all functional areas & P/L responsibility.

15 years experience in the management, production, materials, logistics and international transport fields, 13 of which are at managerial level, the last 10 years being spent as an expatriate in Nigeria, France, Togo and West-Central Africa.

I am mechanical engineer 2002 ,I work as site engineer in the construction companies.

I am a highly experienced and enthusiastic Electrical, telecommunication, electronics and computer Engineer, especially in the mechanical and electrical field, currently working as a maintenance manager, looking for a challenging job where my experience, education, background, certifications and tea

Experience in Managing Quality Control & Assurance for Upstream & Downstream Petroleum business & ability to provide Technical information to the Fuels & Lubricant consumers to facilitate sales. I have also been trained on HSSE & worked on various project in Shell Paksitan Ltd.

An enthusiastic and professional Engineering Manager; chartered mechanical Engineer, who enjoys being part of, as well as leading, a successful and productive team. Quick to grasp new ideas and concepts, and to develop innovative and creative solutions to problems. Able to work well on his own initi

I am a Broadcast Technician ZBC-TV in Zimbabwe. In March 2006 I completed a 4 year apprenticeship with ZBC-TV and have worked as permanent staff ever since. I am a Class One journeyman and hold a National Diploma in Electronic Communication Engineering.

I am trained in on-site and laboratory calibration of instruments and specializes in water quality testers and analyzers. I am also familiar with softwares used in engineering and design. I am knowledgable in PLC programming and capable of troubleshooting program errors.

Aim To Be Associated With a Progressive Organization That Gives Me Scope To Update My Knowledge And Skills In Accordance With The Latest Trends And Be Part Of The Team That Works Dynamically Towards The Growth Of The Organization And Gains Satisfaction Thereof

BS Degree in Control Engineering by computer, Electrical Department, Faculty of engineering, Sana’a University

Bright, personable chemical engineering student seeking full-time employment in Summer 2008.

Mechanic / Heavy Equipment Oppr. / Floorhand /

I pride myself in my work ethic: dedicated, committed, and responsible. I am also a very organized employee, who pays close attention to detail, a quick-learner, performs tasks efficiently and precisely. I consider myself personable and a leader able to function in groups or independently.

I have work experience in United States, SE Asia, and China. I am a registered Professional Engineer (Civil) in State of California, USA. I am looking for a professional/managerial position in civil engineering/construction. Project experience and publications are available upon request.

With a stong technical and innate combination of managerial skills i woul like to apply them to the real world situations an dreach the highest pedestal.

Skills: Auto CAD versions 9 thru 2006i, Prime Medusa, UNIX, Micro Station, Microsoft Office, along with several other computer based applications.

Mechanical, electrical, structural maintenance & repair, estimating, project supervision.

To obtain a challenging position that will allow me to gain knowledge and experience in the area of Computer Aided Drafting (CAD), Microstation and PDS in Technical Department. To work and grow along with an employer to mutually obtain our objectives.

Logistic Job Skills: Stock Turn-in/Turn-out, Stores Indent/Requisition, Stores Data Entry, Physical Inventory Management, Stock Replenishment, Management Reports, etc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 [ 35 ] 36 37 38 39 40 41 42 43 44 45 46 47 48

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out