Resume - Industrial electrician

Misco Jobs

Resume #69444

CONTACT INFORMATION:
View contact information...

INDUSTRIAL TECHNICIAN

MAJOR IN ELECTRICAL TECHNOLOGY

OBJECTIVE: To acquire a well-suited position that will enhance my capabilities in actual practice and will boost my technical knowledge and abilities in a competitive company dealing with electronics, electrical and general manufacturing.

STATEMENT OF QUALIFICATIONS:

- Able to read and interpret electrical and electronic designs and specifications
- Knowledge in advance and modern electrical/electronic applications such as control and automation
- Performs Troubleshooting of electrical and electronic device and components
- Familiar and can operate industrial machines such as Computer Numerical Control Lathe (Tsugami, Fanuc and Citizen), Compression and Injection Machines.
- Knowledge in PREVENTIVE MAINTENANCE, Planning and Organization
Of process and procedures.
- Able to lead and perform supervisory responsibilities acquired thru trainings and field experiences
- Able to plan and initiate studies to reduced cost to boost profitability
- With knowledge in QIP standards involving qualification testing and calibration
- Able to work on/and understand ISO 9001 QMS and ISO 14001 EMS requirements and performs internal auditing acquired thru trainings
- Able to handle hazardous chemicals and initiate emergency actions
- Able to conduct budget monitoring and utilization and control
- Can work with minimum supervisions
- Able to observe safety practices in a hazardous working environment
- Honest, Hardworking and flexible
- Fast learner and Values motivated
- Computer Literate

WORKING EXPERIENCES:

Company: Al Khalefa factory for metal industry (RIYADH)
September 2000 to present

Position: Maintenance Technician (Electrical, Electronics,Mechanical, and Chemical)

Nature of Work:
- In-charge of over-all plant facilities maintenance
- Design and improvement for new products
- Coordination with suppliers of machines for countinous efficiency of equipments.
- Purchasing of Maintenance supplies and consumables.
- Supervising trainee for production and technicians.
- In-charge of countinous maintenance activities and improvements

Company: FDM TOOLS
August 2004 to June 2005

Position: Field Sales Technician

Nature of Work:
- In- Charge of After sales repair and replacement of consumable materials.
- Attending service calls for consumer seeking for product assistance.
- Training In-charge for company technicians for proper use of consumables.
- Advertise new products thru demonstrations and seminars.

Company: SANKYO SEIKI PHILIPPINES MFG. CORP. (SBMA)
July 2002 to August 2004

Position: Technician 1(Engineering Maintenance) July 2002

Nature of Work:
- Performed preventive maintenance and repair of production machines such as
CNC, BNC, EDM, BARREL, COATING, WASHING, U-SONIC, TAPPING, STAMPING, DIE CASTING, BLASTING and numerous modern equipment used in production lines.
- Performed calibration of several measuring and inspection equipments.
- Monitored machine efficiency and restructured maintenance to simplest effective organization.
- Undergone several trainings and also conducted trainings among co-workers with several past learning's and work experiences.
- Assigned as department representative for safety committee, ISO 9001 QMS development and ISO 14001 EMS development
- Developed a well systemized and effective scheduling of machine preventive maintenance.
- Handled 10 technicians in six months after regularization.
- Handled fabrication and repair machines such as LATHE, MILLING and SURFACE GRINDING Machines

Position: Technician 2 (Leader, Engineering Maintenance) February 2003

Nature of Work:
- Assigned as Tool Qualification and Control
- Inspected PCD and Natural Diamond Tools before issuance to line.
- Actually Test cutting tools and formulate parameter adjustment to minimize machine downtime.
- Contacted various suppliers to have options in quality pricing and delivery.
- Coordinated with Japanese counterpart for continual support and coordination in tool inspection and design
- Entrusted to handle confidential Designs and drafts of tool drawings.
- Localized expensive items which can be acquired at lower cost.
- Handled 5 skilled Technician
- Undergone training in handling UNIVERSAL TOOL GRINDING MACHINE to contribute and develop in-house bit grinding.

Position: Sr.Leader (Engineering Control Dept.) August 2003

Nature of Work:
- Assigned to Lead and Handle Parts Tool Control
- Monitor Budgeting and line expenses based on formulated database linking
All consumption to attain cost per piece of a finished unit.
- Direct reporting to Sr. Manager on Production Consumption and target results
On expenses versus line output to indicate loss or gain in the department
- Localized all consumables to reduced importing cost and minimized lead time

Company: RCM Manufacturing Corp. (SBMA)
November 1999- June 2000

Position: Lead Trainee/ Asst. to Engineering and Maintenance Supervisor

Nature of Work:
- Performed Supervisory responsibility among co-trainees
- Undergone and conducted production lectures and trainings
- Maintained assembly and molding machines and sophisticated industrial machines involved in manufacturing of medical mask.
- Maintained Electrical and electronic control devices
- Maintained Centralized HVAC
- Designed and Installed security cameras, door sensors and Line activated entrance
- Trained to reorganize and modified production techniques to its simplest effective form
- Assigned as department purchaser for supplies and materials
- Conducted Inventories on supplies and materials
- Monitored production related problems and initiate corrective plans
- Prepared department weekly reports of Engineering and Maintenance
- Installed intercom and LAN lines for communications and networking
- Trained in fire fighting techniques
- Installed High Voltage Generator

Company: National Power Corporation
Masinloc Coal-Fire Thermal Plant

Position: Student Trainee
Electrical Division

Nature of Work:
- Analyzed and modified Japanese Standard circuitries to local standards
- Performed Power Generation Maintenance
- Repaired and Maintained Circuitries involving power generation control
- Performed Gauge and Monitor Check-ups
- Installed Sophisticated equipment issued by Mitsubishi Heavy Industries
- Performed Radio Control during maintenance procedures inside the generation room
- Designed building and power system distribution under the supervision of Mitsubishi Heavy Industries Limited
- Filed Important Records and documentation for references
- Coordinated with NPC senior officers to ensure that assigned task and SOP's are followed

Company: Department of Interior and Local Government

Position: Elected Official

Nature of Work:
- Assigned as Council Treasurer
- Conducted Information drives and counseling
- Submitted resolutions for improvement and development of youth oriented activities.

EDUCATION:
Scholar at Meralco Foundation Institute –Olongapo City Campus
June 1997-March 2000
INDUSTRIAL TECHNICIAN MAJOR IN ELECTRICAL TECHNOLOGY

PERSONAL INFORMATION:
Age:…………………………………………………..27
Sex:…………………………………………………..Male
Date of Birth:………………………………………...December 25, 1980
Place of Birth:………………………………………..Sta. Cruz, Zambales
Civil Status:………………………………………….Married
Religion:……………………………………………..ISLAM
Nationality:…………………………………………..Filipino
Height/Weight:……………………………………....172 cm. /75 kg.
Languages Written /Spoken…………………………English,Tagalog,Zambal

CHARACTER REFERENCES:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2051 to 2100 of 2389)

Go to Search Parameters...

Brief Description

Motor equipment operator class b cdl, teamsters local 317, past operating engineer union member

Seeking career prospects in metallurgical processing, mineral resources (ferrous metals, base metals, precious and rare metals), process improvement and optimization, research and development, project management, process-business analysis, technology policy and resources assessments

Industrial electrician

Analytical skills to perform analysis of project costs and approaching problems, uses well thought out solutions. Prioritization of time management to ensure that project reports are timely compiled. Workload is managed effectively within deadlines. High level Excel user. Specializing in InControl

Mechanical Engineer, 12 Years Gulf Experience In Maintenance Department

Sdw

BEng Hons., Naval Architecture & Ocean Engineering, University of Glasgow, Scotland

Occupational Health Safety & Environmental Practitioner, Post Gruate Cert. in OHS&E Management

A Dedicated Occupational Health & Safety Professional and Certified Safety Trainer

12 years experience in instrumentation mining processing plant.holder of a craft certifitecate in process control instrumentation.

Data Analyst

4.5-years experience - project management, construction economics, control, contractual compliance, AutoCAD, 4-D scheduling, cost estimation, risk analysis and probabilistic modeling, technology consulting, work breakdown structures, project financial analysis.

Warehouse/Stocking/forklift

Office Programs, Internet Programs, Programming Languages, high communication, hard worker, analytical and researching.

Experienced in construction and repair of recovery and power boilers, exchangers, vessels, light and heavy plate work, basic pipe and structural fitting, as well as work on mild steel, stainless, and aluminum.

I am an undergraduate at the College of William and Mary majoring in business and geology. I have worked in aggregate quaries durring summers in a number of different jobs. I am certified as a QC lab tech by VDOT, I can operate mobile equipment, repair plant equipment, and geotechnic wor

Chemical/Natural Gas Engineer

Education: M. Sc., Chemistry, Specialisation: Heterogeneous Catalysis; Work experience (current occupation), Researcher, Subject: Preparation supported metal catalysts, Goal: Development self-invented technique; International experience: Manager & windsurf instructor, Aruba, Dutch Antilles

5 years experience in Secretary work, Administration support and Branch manager assistant - team support to senior and management level in a multinational company

Performs all basic fireman apprenticeship functions in engineering areas aboard ship, involving cleanliness.

Academic Qualification

HSE ENGINEER AND SUPERVISOR

Doctorate of Chiropractic Medicine, B.S. Anatomy & Physiology, B.S. Health & Wellness w/ toxicology minor, 112 of 120 hrs towards B.S. Biology/Analytical Chemistry Degree

Graduated 09/2004 in Master of Science (Mechanical Engineering) from The University at Buffalo, The State University of New York. Emphasis: Design Optimization. 8 years experience in facilities management (water, fire protection). Extensive experience in South and South East Asia.

Livelink Administrator, Causeway Collboration Administrator

Geologist - Planning - Production - Development - Drilling - etc.

Electrical Apprentice/ Skidsteer Operator/ Forklift Oper ator/ Labourer

Maintenance Technician

Experienced CAD-GIS Professional/Consultant with years of experience in Autodesk design softwares such as AutoCAD, Civil 3D, Map 3D, MapGuide Enterprise and Raster Design.

Marine Geologist with experience in Bathymetric, Oceanographic, Geophysical and Geotechnical Data Processing and QA/QC. Proficient in MicroStation, uSMART and InRoads mapping softwares.

I have the qualifications and experience you are seeking. I am certified as a Journeyman Refrigeration Mechanic, Journeyman Electrician, and Controls Technician. My experience includes over 17 years in construction and service of mechanical systems.

Seven years of hands on mining experience in surface and underground mining of rock salt, silica sand, high alumina clay (fire clay), and limestone

Supply Chain and Procurement Professional with international oil and gas project experience!

cnc edm machinist over 8 years of experience

HUMAN RESOURCES PROFESSIONAL

Experience in EDP (Electronic Data Processing) for 2 year, Knowledge of System and Networking, I can learn the work easily in any industry ,any job regarding my Exp.

geological,geotechnical and hydroegeologiacl investigations

Rangeland Ecology and Management Degree

Objective: To gain professional experience and apply my knowledge on the IT and Telecommunication

Diploma in computer engineering from state board of punjab

Computer literate, adaptable, hard working,

Mining Engineer, Quarry Engineer/manager, Explosives engineer, site superintendent for explosives plant

Environmental Geological Scientist

Experienced Decks and Pools Supervisor in maritime industry seeking position of Deck Supervisor in mining, petroleum, oil, drilling industries. Able to manage, organize, supervise and train a team of international crew members.

Technical Writer / Editor and Proposal Writer

More than one-year experience in the oil and gas fields (exploration and production) as a wellsite geologist on many rig sites in Oman. I have a good practical and theoretical knowledge of the geological settings of Oman, preliminary geological analysis, wellsite logs (LWD, MWD, and Wireline)...

Exp. in nitrogen,snubbing, workover,and also have class A CDL w/ tanker endorsement

6 years Health and Safety experience and training.

Five-year experience in metallurgical projects from the Gold and Nickel industry. Two-year plant and pilot plant experience. Speak, read and write English and Chinese (Mandarin). Familiar with pressure leaching at high temperature.

Working in the Safety and Environmental for the Manufacturing, Oil and Gas and the Wind Industry

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 [ 42 ] 43 44 45 46 47 48

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out