Resume - Automation Project Engineer ( 4yrs Exp)

Misco Jobs

Resume #70726

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
-----------
Passed BE INSTRUMENTATION from Mumbai University with second class in the year
2003.

OBJECTIVE:
------------
Strive harder to increase my bank of knowledge in the Automation technology and
Using my potential to the fullest implementing them as per requirement and to attain professional excellence in the field of Automation.

Work Experience:-

1. SIEMENS, DUBAI.
Department: -Siemens Building Technologies.
From: July 2006.
To: Till date.

Designation: Project Engineer.
Responsibility:
* Designing of the project
* Development of software
* Management of site activity and commissioning
* Commercial accounting of the project
* Demonstration and technical discussion with the client
* Documentation and handing over of the project

Ongoing Projects:
1. Dubai Electricity and Water Authority, L-station Phase-2 (power plant):
The project is to commission the Building management system in DEWA
power plant. The system consists of 25 buildings. Monitoring and data acquisition of all the buildings is to be done on the central workstation.

2. Olefins Company, Ras Laffan, Qatar.:
The projects consist of 16 buildings in Oil field in Ras Laffan. Each building has a standalone system. The Control and monitoring is done from dedicated touch panels.

3. Sidra Tower, Dubai.
The tower is of 45 floors, the BMS of the building will be monitored from the workstation.

4. B+G+5 office building, Dubai.
The project is to commission the building management system, in the office building. The system consists of 84 nos. of FCU. Third party integration with UPS on modbus.

Projects:

1. Dubai Electricity and Water Authority, L-station Phase-1 (power plant):
The project was to commission the Building management system in DEWA
power plant. The system consisted of 30 buildings. Monitoring and data acquisition of all the buildings was done on the central workstation. Integration with the DCS was done on Modbus.

2. Dubai Electricity and Water Authority, Administration building:
The project was to commission the administration building of DEWA. The building consisted of office areas, cabins and common areas.

3. Traders Hotel, Dubai.
The project consisted of ROOM MANAGEMENT SYSTEM which was implemented in the hotel which consisted of 270 rooms. RMS is controlling all the parameters in the room, for energy saving. This system is based on KONNEX
protocol. The access of the room as well as other parameters of the room like temperature, lighting etc, was depended on the chip card technology. By implementation of the system, energy saving was done to a considerable amount. The BMS for the entire 40floor building was also done.

4. B+G+6 office building, Dubai.
The project was to commission the building management system, in the office building. Third party integration with Central battery system was done on LON.

2. SIEMENS, MUMBAI.
Department: -Siemens building technologies
From: November 2005
To: June 2006.

Designation: Project Engineer.

Responsibility:
* On-site commissioning of the project.
* Demonstration to the client.
Projects:

1. Pfizer, Navi Mumbai.
The project was to commission the BMS in the laboratories of the pharmaceutical plant.

2. Chiron Vaccines, Gujarat
The project was to commission the BMS in the laboratories of the pharmaceutical plant.

3. Jhondeere Pvt Ltd., Pune
The project was to commission the BMS in the administration office. Third party integration with UPS system was done on LON.

4. The Cotton Corporation of India, Navi Mumbai.
The project was to commission the BMS in the administration office.

3. Expert Systems
Process Control and Plant Automation, Navi Mumbai.
From: May 2004
To: November 2005

Designation: Project Engineer.

Responsibility:

* On-site commissioning of the project.
Projects:

1. TATA Motors, Pune
The project was to commission the Integrated Production Management system (MES) for TATA motors.
The software used was Cimplicity-GE Fanuc.

2. Jindal Aluminum, Bangalore.
The project was to do the automation of the TANDEM MILL. The logic for the control of Tandem mill was developed. The automation was done on GE Fanuc
PLC. The drives were Simoreg-Siemens.

3. KPT Metal Pvt. Ltd, Ahemadabad.
The project was to do the automation of the 12 HI ROLLING MILL. The logic for the control of Rolling mill was developed. The automation was done on GE
Fanuc PLC. The drives were Simoreg-Siemens.

4. Mohnot Steel Pvt. Ltd, Jodhpur.
The project was to do the automation of the 4 HI ROLLING MILL. The logic for the control of Rolling mill was developed. The automation was done on GE
Fanuc PLC. The drives were Simoreg-Siemens.

5. Nagarjuna Fertilizers and Chemical Ltd., Kakinada
The project involved up gradation in the material handling system. The PLC logic was modified and upgraded as per the client requirement. The PLC was U84-
L&T.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 451 to 500 of 2387)

Go to Search Parameters...

Brief Description

Offer a unique combination of Senior Level Federal Government and Private Sector project management and leadership experience. Extensive International experience providing strategic solutions to a wide variety of International Clients.

RFID hardware design, end - to end RFID system integration, presales activity

I am the Environmental Health Specialist for the Gulf Cooperation Council Center for Infection Control, I have ISO 14001:2004 Certified Lead Auditor Certificate EMS

My years of experience have equipped me with a multitude of skills, and I would like to continue my growth at a progressive organization. Additionally, I possess strong office/administrative, and good planning skills,

Three year working experince in field of hydrogeology and hydrochemistry.

I am a Chemical Engineer with Seven years of experience. My experience can be divided in to two main categories; industrial and consulting, on air and wastewater, treatment, operation and maintenance encompassing permit applications, work plans for regulatory compliance in the areas of Environment,

Hydraulic Design, Troubleshoot, Repair and Manufacture

i can relate actively in the community and i am highly adaptable in any diverse culture and people

Licensed Electrical Supervisor / Project Manager with 30 years experience

Petroleum and Natural Gas Engineering, BSc Earth science, MS Candidate

Automation Project Engineer ( 4yrs Exp)

Materials Science Engineering, Physics, Polymers

Degree in Civil Engineering, Masters in Soil Mechanics and Foundation Engineering and Ph.D. in Environmental Geotechnology from IIT Bombay, India

Experience in pollution assessment, emission inventories / monitoring, characterisation of sources, exposure assessment, source testing, data collection & interpretation, emission estimates, regulatory analysis, engineering calculation, presentation and technical report writing.

ME (Environmetal Engineering), 4+ years in desing of waste water treatment units, design of under ground drainage network systems to cities.

Dynamic Assistant Professor of Environmental Engineering broadly experienced in contaminant transport modelling and pollution control in surface and groundwater. Physico-chemical, biological and electrochemical design of environmental control processes, hazardous waste management and treatment.

Iam a postgraduate in Environment Management worked with various petrochemicals, chemical, pharmaceutical, bulk drugs and Oil & Gas E&P industry for the past 8 years in various countries. My experience has been as an Environment Engineer; Environmental Specialist; QHSE Engineer and EMS staff in

Environmental Engineer/Scientist

I have over 10yrs as a mechanical plant fitter

Strategic planning, persuasive and knowledgeable presentation of company product, ability to influence key decision makers and gain contract commitments is what I will bring to your organization as an experienced Outside Sales Representative with a proven track record.

Masters student at CSU with experience as RSO

Assistant Product Engineer " Wafer Probing ang responsible for Yield improvement "

4 years of exp in Administration, Pursuing MBA

Hold a Master degree in Environment Sciences specializing in climate change and honors degree in Environmental Biology as well as six months’ experience in a CDM project developer, six months in a NGO and one year with the Environment Agency, Desire to work on CLimate Change issues.

I have 15 years of working experience with over 5 years in senior management positions with international companies in Asia.

Ambient air monitoring of total suspended particulate (TSP), nitrogen dioxide (NO2), sulfur dioxide (SO2), heavy metals, hydrogen sulfide (H2S), volatile organic compounds (VOC) as per DENR and USEPA standard.

Chillers Process Systems, Compressor Screw & Reciprocating & Centrifugal,Motor Starter,Cascade Refrigeration, Gas Compression,Ammonia Plants,Control Panel, PLC's, VFD's

ISO 17025/ GC CHEMIST /LAB CHEMIST

PhD in enironment engineering

HSE Manager NEBOSH, IOSH, HND's

Technological Assessment and Management -environmental studies, transportation and energy production

My skills and qualification are very wide-ranging and diverse; this allows me a lot of latitude for skills transfer for both land based and marine orientated positions.

Environmental Engineer with more than 7 years professional experience in water projects. Right now, she is acquiring her Masters Degree in Environmental Engineering Science, UNSW, Australia.

I have a BS in Chemical Engineering from Colorado State University. I am a recent graduate from the Environmental Science and Engineering department at Colorado School of Mines, where I completed graduate Master’s research and thesis work specializing in groundwater remediation.

Career Objective, To share knowledge on Best Practices on Health, Safety, Environment and Quality (HSEQ) in the development and implementation of HSEQ Management System and promote a culture of Continuous Improvement.

Excellent practical and theoretical environmental skills for a recent graduate. Demonstrated ability to collect and analyse a variety of ecological and environmental data. Computer software exp in statistics and GIS packages. Solid work history of prior employment displaying a commitment to work.

8 years of drilling engineering experience. Drilling and workover engineer, junior drilling supervisor, well site drilling engineer, bits optimisation engineer, HSEQ support Eng. Bits, stuck pipe & well control contracts manager and cost management project engineer.

A Graduate in Master of Technology (M.Tech) in Environmental Engineering and Management. having 8 years of experience in the areas of Environmental, Health and Safety Projects Management.

Geologist looking for environment, mining, mudlogging careers

ITI fitter I have 6 years experience in mechanic field also i know lathe ,milling machine operations

Piping Designer PDS CAD

GIS, Oracle, SDE, ARCGIS, Data Model, Administration, Senior GIS, CMMI

To seek a position in an organization, which values & benefits from my technical and analytical skills. My areas of interest in map making are Digital Cartography, Remote Sensing & GIS application.

Experiennced Environmental Scientist

OBJECTIVE A challenging position which provides opportunity to improve my skills as a Senior Process Engineer.

Dear: Human Resources I am writing to express my interest your advertised position and I have endorsed my resume for your consideration. The work, and educational experiences outlined in my accompanying resume demonstrate the professionalism, and innovation I can bring to your organization.

30 yrs. experience in equipment maintenance, operation, and supervision. Expertise: Supervision, planning, cost control, record keeping, PM scheduling, maintenance and repair (electric, diesel, gas), Hydraulics, Pneumatics, Pump and dewatering systems, Milling.

Successfully leverage my consulting, analytical and academic skills to enter the industry as an environmental specialist – while attaining professional growth through continuing education and a challenging career.

Hydrography, GPS GIS CZM

21 Yr Exp Power Electronics - Electrical Engineer, Large Variable Speed Drives & Motors, Automation

1 2 3 4 5 6 7 8 9 [ 10 ] 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out