Resume - Enviromental Process Engineer/Technician

Misco Jobs

Resume #71697

CONTACT INFORMATION:
View contact information...

Objective To secure a technical service position with a growth orientated company offering opportunity for professional development and advancement.
Experience 2007-2008 Halliburton Oooguruk Island, AK
Lead Operator
* Install, operate and repair solid control and grind and inject equipment.
* Supervise drilling fluid mixing and transferring of fluid from mudplant to drilling rig.
* Supervise five man crew in mudplant and grind and inject units.
2007-2007 MI Swaco Bakersfield, CA
Technical Service Engineer
* Provided technical support to servicemen and other colleagues daily and during special projects.
* Surveyed existing Drilling Waste Management installations to determine if they provided the customer optimal results.
* Reviewed upcoming Drilling Waste Management Installations to determine the required equipment and processes to provide the customer with their desired results through the specific environmental processes.
* My job assignments were located in Bakersfield, California, North Slope, Alaska and Ignacio, Colorado.
2004-2007 Brandt a National Oilwell Varco Company Bakersfield, CA
Senior Technician
* Installed, maintained, diagnosed and repaired Solids Control and Drilling Waste Management equipment located at both onshore and offshore drilling rigs.
* Project Manager in charge of drilling waste management for the San Andres seismic project.
* Project Manager on special assignment during Geothermal Drilling.
* My job assignments were located in Bakersfield, California, Nueve Leon, Mexico and the Gulf of Mexico.
1997-2004 Oiltools/Derrick Equipment Bakersfield, CA
Equipment Technician
* Operated a Mud Cooler and Cutting Dryers during the environmental process.
* Installed, maintained, diagnosed and repaired Solids Control and Drilling Waste Management equipment located at both onshore and offshore drilling rigs.
* Worked 14 consecutive days/nights with 14 consecutive days/nights off during offshore schedule and on call twenty-four hours a day, seven days a week during the onshore schedule.
* My job assignments were located in Bakersfield, California, Fort McMurray, Canada, Cerra Puerta, Mexico and the Gulf of Mexico.
1988-1997 TRW Brandt Bakersfield, CA
Offshore Technician
* Installed, maintained, diagnosed and repaired Solids Control and Drilling Waste Management equipment exclusively for off shore drilling rigs.
* Lead Offshore Operator located in the Gulf of Mexico.
* Project Manager of all offshore drilling projects.
* Worked 28 consecutive days/nights with 28 consecutive days/nights off.
1982-1988 Struthers Thermo Flood Bakersfield, CA
Construction Crew Lead, Technician
* Supervised six man crew in construction and retrofit of twenty five and fifty million btu generators.
* Maintained, diagnosed and repaired steam generators and atmospheric scrubbing units.

Education 1982 West High School Bakersfield, CA
* High School Diploma
Qualification Highlights

I possess over twenty years of experience operating, maintaining and troubleshooting High-Speed Decanting Centrifuges, Atmospheric and Vacuum Type Degassers, High Volume Mud Cleaners, Linear and Elliptical Motion Shale Shakers, Cutting Dryers, Mud Coolers, Cutting Conveyance Systems, Centrifugal, Positive Displacement and Diaphragm Type Pumps.
Additional Skills Microsoft Outlook Microsoft Outlook Express Microsoft Access PC Anywhere Adobe PhotoShop Windows NT/98/2000/XP/2003 Windows 3.1/95/98/ME/XP/2003
Training Certificates STOP Safety Training North Slope Safety Training H2S Confined Space Adult and Infant First Aid and CPR DRIVESMART Water Safety

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1801 to 1850 of 2388)

Go to Search Parameters...

Brief Description

Recent graduated geologist. Looking for a challenging career in geoscience anywhere in the world. Good comunication and teamworking skills

Nurse wanting job in Iraq or Kuwait

Civil, electrical, and mechanical inspector

I'm specialized in developing new water based decorative paints and in modifying existing decorative paint formulations.

B.Tech in Chemical Technology with Experience in Technical Sales and Services

I have gained in excess of twenty five years experience in the construction petrochemical industry which includes offshore and onshore oil & gas projects for such companies as Shell, Arco, McDermott, Hyundai, ConocoPhillips, Premier Oil, Saipem, Unocal and Statoil

Bs. in Metallurgical Engineering, Ms. Environmental Engineering, Ms. Mining Engineering. 3 years experience in mineral processing and mining and 1 year experience in environmental auditing. I'm analytically skilled, good at working in a team, can carryout complex task with no supervision

Dual Post Graduate Mechanical Engineer with 10 years of experience

Muliti-storey, Precast Panels, Site Retention, Demolition, Project Management, Structural Steel, Asbestos Removal, Re-roofing

Basic automotive schooling at technical school. One year automotive experience and three years work on Semi Tractor and Trailors

Educated, experienced, reliable, and hard working. Please ask for refrences, as I have many...all very positive and complimentary. Willing to start anywhere (within reason) and work my way up !

Engineering

Repairing & Troubleshooting Computer Hardware, Printer’s and UPS etc. Data Communications & Computer Networks (Networking using windows OS 95, 98, NT, Active Directory & ISA Server). Familiarity with LINUX OS (Installation & Configuration). Electronic Devices and Circuits. MS Office.

Environmental, Occupational Health and Safety Engineer

Broad experience in Petroleum Exploration and Production With cross-functional expertise in Operating, Commissioning, Maintenance, Testing, Training and Safety / Environmental Compliance.

Industrial Projects, Purchase, Procurement, Supply Chain Management,Contracts Management,ERP Implementation,Vendor Mgmt, Business Development.,Material Management.

Arc view 3.2a, ERDAS Imagine 8.7,Arc GIS 9.1, (All extensions),AutoCAD/DeskMap,Ms Office ,DEM,Spatial analysis,DBMS

More than 8 years experience in electronics field

Experience in ISO 9001, ISO 17025, ISO 17799 , Good Laboratory Practices(GLP) systems. The ISO 17025 and GLP are mainly focussed on testing and clinical laboraories. Almost 7 years of experience in Qulaity Management Systems as well as and System Administration activities.

Human Resource, Employee Relations, Recruitment, Corporate Social Responsibility, Social Audit

General manager of Services Company / QHSE and Management systems Oil and Gas sectors

Free! I am able to effectively perform set tasks, successfully fulfil the task objectives and meet their dead-lines. I report information to the necessary authorities by means of written and/or verbal reports which are reliable and accurate.

Lead Engineer for Aramco Transmission projects and Systems integrator also for Various overseas projects.

QC Mechanical, API 570, API 653, CWI & NACE coatings inspector

Shift in-charge (Production Operator) & Maintenance Engineer-Electrical, 5+years experiences, MSc Power Engineering, Chalmers Technical University, Gotenborg Sweden, Management training, Computer operations (Windows application software, comsol multiphysics, Mathlab) skills, Plant safety training, p

Experianced Petroleum Graduate

Educational in Mechanical Engineer, as well as in miscellaneous personal studies that I had attended(i.e. Safety & Health Officer, French Language, Japanese & Mandarin Language).

Accountant with data analysis and auditing skills, able to create Applications for Database and all Financial Systems,able to manage any recruitments at any field

Technical, Managment, communication. Skills

Enviromental Process Engineer/Technician

Operations Manager; Telecommunications; Administrative; Business Development

Document Control / Project Administrator

Talented and value driven professional with 9+ years of experience in health, safety, environmental and quality management. Motivated by challenge and rewarded through key initiatives that aid continuous improvement, as well as profitability and productivity.

10 years Auto cad work experience with Design & Drafting background in the field of Fabrication structures, Sheet metal, Conveyors and Material Handling systems

I am skilled in providing/developing HSE advice, HSE policies, accident/incident investigations, safety inspections, HSE training, Risk Assessments, emergency response/ evacuation procedures. I have obtained the National NEBOSH Certification in UK and the NISP - HSE certification in Nigeria

Qualified health and security manager. Experienced in leading H&S supervisor on oil and gas plants or on remote site. Also have experience on construction site. Implementation of H&S programs, accidents and incidents investigation.

MBA with 5 Yrs of Pharmaceutical Experience in Sales and Marketing, Good Man Management skills, Team Management abilities, Target Oriented.

Project Engineer Automation Controls Instrumentation PMP Certified 9+Years exp Plant Automation PLC SCADA DCS Project Manager CAP

Management, business, trading, oil and gas, adminstration, HR, petrolium

Project Engineer wit BSc of Chemical Engineering and experiences in oil and gas

Operating Engineer

Perform concurrent duties of a project manager which involve the management of several Aramco and non Aramco projects in close coordination with the client and/or his representatives and with the engineering design team

Mechanical Engineer with proficiency in IDEAS, Nastran

A dynamic accomplished Information Technology Professional with unique combination of experience in Networking and Hardware. Strong Analytical, Organizational and problem solving skills. Ability to identify Operational Deficiencies, skilled in applying Technology and Administration practices to impr

Mechanical engineering finite element analysis composites ansys Master's

PLANNER SMELTER

Mud engineer/ mechanical engineer/ hse advisor/ compliance and standard/ maintenance supervisor/ general inspector and supervisor

AutoCad Mechanical Desktop AutoCad Inventor 3D Modeler

PDMS-11.6, PDS-7.1, Autocad-2006, CAEPIPE 5.11, Pro-E Wildfire2.0

Handled operations Batch Chemical Processes, Fermentation, Distillation, Extraction, Evaporation, Plant Utility Section, Pumps & Compresors, Safety of 3M's and Housekeeping, Maintenance & Overhaul of Operations, Troubleshooting, Startup & Shutdown of the operations in the cGMP environment etc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 [ 37 ] 38 39 40 41 42 43 44 45 46 47 48

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out