Resume - Obtaining a position as an Electrical Engineer or Designer to utilize my strong ...

Misco Jobs

Resume #72412

CONTACT INFORMATION:
View contact information...

Professional Experience
February 2008 – Present
Electrical Designer, Lowe, Gravelle & Associates Inc., Cornwall, Ontario
* Designed electrical and control system for industrial plants including:
o Waste treatment facilities, which integrated fully controlled pipe and tanks freezing protection system, pumps and agitations power supply and protection, life safety system.
o Dust collector power system involving high power VFD operated motors, life safety system.
* Retrofitted, adjusted and tested annunciation systems for high voltage yard, rectifying installation and critical production process. Upgraded existing control system without interrupting critical technological flow.
* Performed audits of clients' electrical systems recommending numerous improvements and enhancements.

September 2005 – February 2008
Integration Specialist, C-COM Satellite Systems Inc., Ottawa, Ontario
Responsible for
* Integrating, installing and testing hardware and software for mobile full-duplex satellite data communication system (iNetVu).
* Building prototypes and pilot systems, analyzing problems and performance, recommending improvements.

July 2001 – September 2005
Electrical Engineer & Project Manager, Design Division, Military Plant, Israel
* Designed electrical and communication systems for mobile and stationary facilities of military units, navy and air forces, including mobile dental clinic, command centers, RF laboratories, meeting rooms, training classes, UPS system and electrical rooms.
* Performed research and development in the field of modern technologies, such as o Computer design of electrical and communication harnesses.
o Protection methods against electrocution in stationary communication facilities and mobile vehicles.
* Group leader for the integration of civilian electrical appliances into military communication-equipment vehicles.

August 1998 – July 2001
Electrical Engineer, Intel Electronic Ltd. FAB 18, Israel
* In charge of plant's main transformation stations (total of 14 station up to 5MVA):
o Analyzed transformation stations fault and failure data and wrote specifications for preventative maintenance.
o Managed the transformation stations maintenance process including planning and scheduling the work of different teams, groups and production facilities.
o Checked-up and calibrated of protection systems.
o Designed the control system for force cooling of the transformers.
* As a team leader responsible for installation and maintenance of on-line capacity measuring system.
o Performed market researching and reporting recommendations to the steering committee for decision making.
o Prepared CDR, safety instructions and procedures for installation and calibration.
o Managed the installation, integration with the monitoring software and supervising the newly deployed system during its first month of operation.
* As a project leader performed the task of rising voltage to 208V without having the customers disconnected:
o Monitored and performed computer-assisted analysis of voltage changes of the consumers and distribution boards.
o Designed the enterprise-scale procedure for transferring electrical load to a back up transformer.
o Supervised the implementation.
* Supervised and controlled installation of production equipment in the Clean Room.
* Lead the project of enhancing the command and control system for about 40 MCC's.
* Performed calibration and maintenance of Clean Room's static Electricity Neutralization System.
* Instructed and trained other employees.
* Implemented troubleshooting and repair.
* Supervised miscellaneous electrical jobs.

August 1994 – August 1998
Practical Electrical Engineer, AGAN Chemicals, Israel
* Designed, installed, wired and operated plant's electrical system.
* Managed electrical projects and supervised contractors.
Education & Professional Training
2004/2005 - McKit, Marketing & Engineering Company, Methodical Engineering CAD
* Solid Edge basic design (CAD software), 45 hours.
* Fast track to pro/ENGINEER® Wildfire (CAD software), 45 hours.

2003 - Net Bryce Technology Institute
* Telecommunication and Computer Networks, 45 hours.
* Computer Hardware and Architecture, 100 hours.

1999-2000 – Bureau of Professional Engineers and Architects, Israel
* Electrical installation, design and examination of low voltage electrical facilities up to 1000 volt, 140 hours.
* Electrical installation, design and examination of electrical facilities without voltage and current limitations, 60 hours.

1987-1992 - Polytechnic University, Belarus
* Diploma in Electrical Engineering, evaluated as B.Sc. by CCPE; specialization in power supply of industrial enterprises, cities and agriculture.
Professional Membership
* Application to PEO pending.
* A member of the Israel Engineers' and Architects' Organization, Electrical Engineering section from 1992.
Awards and Achievements
* Recognition letters from various employers and customers.
* In 2004 awarded Certificate of Excellency from Design Division, Military Plant.
* Hardcopy is available upon request.
Computer Skills
* Microsoft Windows, Office, Visio.
* CAD: AutoCAD, Simatron IT/Elite, Solid Age, Pro-Engineering.
* Design software: Tyco - HarnWare, Raychem - TraceCalc Pro.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 601 to 650 of 2388)

Go to Search Parameters...

Brief Description

Pro/ENGINEER, AutoCAD, SAS, Microsoft Office, MSC NASTRAN

A Mechanical Engineer with over 11 years of proven functional experience and can perform various roles in Manufacturing, Programming ,Design and Materials Procurement / Material Management.

I am the head of the laboratory at the moment. I have been working in the metrology field for 6 years and I deal with the following: preparation of gas mixtures by gravimetric and dynamic methods, gas analysis on GC, NDIR, FTIR and others. As the head of the lab I deal with clients.

Doctorate in Science, Ecotoxicology, marine pollution, Enzymes, Biomarker, biomonitoring of pollution,

LOOKING FOR A CHEMIST AND/OR ENVIRONMENTAL POSITION THAT ALLOWS ME TO APPLY MY 9 YEARS OF EXPERIENCE AND EDUCATION IN CHEMISTRY.

Bachelor of Engineering graduate in Electronics & Communication in honours. Now working as a RF Engineer in CDMA optimization Project driven by Wipro Technologies, Gurgaon. Our client is Motorola Japan Limited. Skills: RF Planning and Optimization

Senior Instrumentation & Control Systems Engineer

My objectif Is to prove my skills experience and obtain challenging position in which I can utilize my abilties to meet the need of the organization in which i'm employed.

a good team player,skillfull in environmental resourse management and higly inteligent

Experienced Industrial Structural Engineer - concrete, steel - 20+ years, UK & US codes

I was worked at PT. Pusri Palembang,INDONESIA (Bulk Carrier Shipping Division), responsible for maintenance diesel engine

Wetland Studies, Wildlife Research, Environmental Assessment, Endangered Species Survey

To obtain gainful employment in the Software Engineering field with an organization that will benefit from my knowledge and experience.

Seeking a challenging position in Environmental Engineering field, Environmental safety and Health, Environmental Quality Monitoring, Water and Waste Water projects where I can apply the knowledge that I have learned and gained practical experience and serve the organization.

Strengths in project management, problem solving, team leadership, instrumental analysis, laboratory techniques, analysis data, research proposals, design interactive website, poster, oral presentation, Stella computer modelling, Outlook, MS Office Suite, Adobe Photoshop, and Fusion.

I have: . Master's Degree in Geology . 4 years research experience . 2 years teaching experience . An impressive career of field works including mapping . Efficiency in sampling of rock and soil from outdoors . Extensive training and experience in laboratory.

A graduate of University of Port Harcourt, Faculty of Science, Department Of Geology (Bs.c Geology) Rivers State, Nigeria. Working currently as a contract staff with Shell Petroleum Development Company Nigeria Ltd.

Recent college graduate with experience in environmental education, natural resource conservation, advocacy and consulting work.

Design eng. in solid works, ideas, and ug & b-tech in mechanical eng.

Application post for welder

To be a part of a progressive organization that gives scope to enhance my knowledge, skills and confidence to achieve my goals with the combination of honesty, sincerity and hard work

Welding all rod types: M.I.G., T.I.G, all plastics, oxyacertylene. Equipment repair and maintenance of all machinery for use in metal working shears, brakes, manual cutting, machine cutting. All machine shop equipment, lathers, radial arm, drill presses, and iron works.

A highly experienced professional with expertise in providing computer mapping using ESRI's products. Demonstrated ability in the data collection and data conversion of digital maps. Detail-oriented and results driven to achieve the overall goals of the company.

I have a MS and BS in Environmental Engineering with just under 1 year experience as engineering consultant. I am looking for a career related to energy supply, generation, and distribution.

Training, education and experience in health, safety and the environment.

I am a talented and hard-working individual, committed to the environment, seeking to gain experience in an environmental field.

Risk Assessment Studies, Safety and Environmental Audits, Environmental Management Plans, Environmental Impact Assessment Studies, Basic & Detailed Design and Engineering of Effluent Treatment Plants & Sewage Treatment Plants

Obtaining a position as an Electrical Engineer or Designer to utilize my strong technical, analytical and organizational skills.

COO - Director of Business Development - VP/General Manager

B.Sc. Natural and Health Science, B.Tech Environmental Health, Health, Safety and Environmental Management

Metallurgical engineer with diploma in mechanical engg. and graduate's diploma in computer application

Graduated MSc cum laude in earth sciences. Project Manager with 51/2 years work experience with a multinational natural resource group and a leading consultancy with an eminent client list. Consultant in coordinating and writing environmental impact assessments (EIAs) and in environmental management

Skilled in Environmental Impact Assessment

14 yrs, in Refinery & Petrochem. Develop& management of cost-effective EHS Programs, Implementation of EMS, Wastewater Treatment, Hazardous Waste, Air Pollution Control Tech., prevention/minimization& recycle/reuse, Knowledge of national and international environmental regulations.

I am chemical engineer with 14 years experieced in corrsion inthe industrial water treatment, process units, coating, cathodic protection, and chemical injection.

Outstanding Engineer

Groundwater sampling, indoor air, GIS, groundwater/contaminant transport modeling

Translator

Environmental Engineer looking for a full-time engineering position in the field of environmental, transportation or civil engineering, nationwide, willing to travel, will consider other engineering disciplines if training is available. Prefers jobs in a big metropolitan area, 2 weeks notice needed.

Highly motivated, team-oriented individual with excellent communication skills. Two years of industry experience with Turner Construction-USA & NESPAK-Pakistan respectively. Prepared budget reports, schedules, estimates and bill of quantities and performed engineering supervision of various trades.

At the present time I am working as an Environmental Engineer within the Semiconductor field. I manage the companies Hazardous Waste Management program and teach numerous health and safety training classes globally.

To obtain a civil/environmental engineering position with the opportunity for promotion to project management

Environmental Scientist, with experience in Water Quality. Willing to train for any position. Willing to travel Worldwide.

Meteorologist

I am a geologist with at 13 years experience in different fields of engineering geology. I have involved in different engineering geological and geotechnical studies of major infrastructures such as dams and tunnels. I am dynamic and motivative and wish to improve my knowledge in geotechnic

ERP Implementation, Business Process reengineering, Process Documentation

To secure a position with responsibility to apply my extensive programming and analytical skills in the field of software supplemented with my engineering background

Environmental Engineer/Scientist with over thirty years of experience with project and program management, industrial hygiene, hazardous waste and material management, modeling, monitoring, regulations, risk and technology assessment, pollution control, and environmental remediation

fitter /pumpman /operator/maintainer of plant at powerstation /just worked in kuwait as mechanic for us military

Doctor of Engineering, Department of Civil Engineering, Kyoto University, Japan.

1 2 3 4 5 6 7 8 9 10 11 12 [ 13 ] 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out