Resume - Professional Engioeer

Misco Jobs

Resume #72669

CONTACT INFORMATION:
View contact information...

Design Engineer [Pro-E / CAD / CAM]

Objective:
To seek a challenging job in the fields of CAD/CAM/CAE/Pro-E/CATIA, and to enhance my proficiency towards advancement of the firm and for my career appraisal.

Academic Record:
1 M CAD/ CAM Course in CENTRAL INSTITUTE OF TOOL DESIGN, Hyderabad, India
2 Bachelor of Technology in Mechanical Engineering from Sri Venkateshwara University College of Engineering, Tirupati in 2001, India.

Professional Experience:
1 CAD Professional with 6 years of Experience.
2 Pro/E-2001 Wildfire 1,2,3,Autocad,Catia V5, Pro/INTRALINK3.1/3.3.

CompanyDesignation Period:
1) Worked in Wipro Technologies, Bangalore, Karnataka, India as a Sr. Project Engineer in Consumer & Industrial Appliances
* Project proposal, Estimation, Project start up, team member identification,
Project induction, Planning, Delivering Rework(if any), Clients feed back & Invoice.
* Job planning Scheduling and execution of modeling and assemblies
* Detailing of modeled and assembled components using detailing modules.
* Creation of standard Components, Assemblies and Detailing in PRO\E(2001,Wildfire2,3).
* QC Sheet maintenance, Case studies to find the loop holes.
* Maintaining customer's standards & requests.
* Handled Interviews, Technical presentations, Self learning.
2) Worked in L&T e-ES Bangalore, Karnataka, India as an Executive ( Design Engineer) in Construction & Mining Equipment Team
* Job planning Scheduling and execution of modeling and assemblies
* Detailing of modeled and assembled components using detailing modules.
* Creation of standard Components, Sheet Metal, Assemblies and Detailing in PRO\E(2001,Wildfire).
* Designing the Components Under stress conditions.
* Maintaining customers standards & requests.
3) Worked in EMERSON CLIMATE TECHNOLOGY, EDEC, Pune, India as an ENGINEER-PRODUCT DESIGN in CONDENSING UNIT DIVISION(CUD)
* Job planning Scheduling and execution of modeling and assemblies
* Detailing of modeled and assembled components using detailing modules.
* Creation of standard Components, Assemblies and Detailing in PRO\E.
* Database sharing by pro\Intralink, Meta Frame.
* Preparing the BOM, getting new Engineering Notification details.
* Maintaining customer's standards & requests.
4) Worked in GE, India Business center, Hyderabad, India as a CONTRACTOR in
MOTORS TEAM from April'03 to June '04, through RANN VISION PVT. LTD. CAD Engineer
* Job planning Scheduling and execution of modeling
* Detailing of modeled and assembled components using detailing modules.
* Creation of standard Components, Assemblies and Detailing in PRO\E.
* Job planning Scheduling and execution of modeling
* Developing 2D drawing into 3D solid models

5) GRABEN IMAGE SYSTEM PVT. LTD., Hyderabad, India CAD Engineer
* Identify and record any problems relating to product and process.
* Modifying the design for improving reliability and other abilities.
* Developing 2D drws into 3D solid models and maintaining the Quality level of solid model.
CAD / CAM Knowledge:

Auto CAD: 2D Modeling, 3D Modeling and Drafting.

Pro- E: Part Modeling, Surface Modeling, Assembly, Drafting, Sheet Metal
Design, Mould, Mechanica, Manufacturing.

I-DEAS: Modeling, Assembly, Surfacing, Drafting, Simulation and Manufacturing.

CATIA: Surface Modeling, Assembly

ANSYS: Sructural & Thermal Analysis

MASTER CAM: Turning & Milling

UNIGRAPHIS: Part Modeling, Solid Modeling, Surface Modeling, NC, CNC Programming.

SOLID WORKS: Modeling, Assembly, Surfacing, Drafting

Computer Skills:

Operating System Windows - 9X, 2K & NT.
Languages C, C++.

Strengths:

* Highly organized and dedicated with positive attitude.
* Able to handle multiple assignments under high pressure and consistently meet high deadlines.
* Have excellent written, Oral and interpersonal communication skills.
* Thrive on working in all challenging environment.
Project Details:
Title Progressive Die Tool P463.
Client Wipro Technologies, Bangalore, Karnataka, India
Team 3
Software Pro-E (Wildfire 3)
Role (i) Designing the component to meet required conditions of a Progressive die tool to perform the piercing, cropping & naming operations
(ii)Modeling & Detailing in Pro/e Wildfire.
(iii)Meeting the customers required Stds by QC &as a PL

Title Concept generation for Tailgate Weight reduction.
Client Wipro Technologies, Bangalore, Karnataka, India
Team 6
Software Pro-E (Wildfire 3)
Role (i) Concept generation to meet required condition of weight reduction by alternative material, Structures & mechanisms.
(ii)Modeling & Detailing in Pro/e Wildfire for representation.

Title Concept generation for Governor resetting mechanism.
Client Wipro Technologies, Bangalore, Karnataka, India.
Team 6
Software Pro-E (Wildfire 3)
Role (i) Concept generation to meet required condition of resetting the Governor of the lift by the mechanism driven by solenoids.
(ii)Modeling & Detailing in Pro/e Wildfire for representations

Title Progressive Die Tool P437,P447
Client Wipro Technologies, Bangalore, Karnataka, India.
Team 2
Software Pro-E (Wildfire 3)
Role (i) Designing the component to meet required conditions of a Progressive die tool to perform the piercing, cropping & naming operations
(ii)Modeling & Detailing in Pro/e Wildfire as per clients stds as a project leader

Title Front loader.
Client Wipro Technologies, Bangalore, Karnataka
Team 4
Software Pro-E (Wildfire 2)
Role (i) Designing the component to meet required conditions of a lifter of Front Loader which collect the garbage to the Refuse trucks.
(ii)Modeling & Detailing in Pro/e Wildfire Part, Assemble & Sheet metal

Title Power Pack
Client L&T e-ES, Bangalore, Karnataka, India
Team 6
Software Pro-E (Wildfire 1),Sheet metal, Auto Inventor.
Role (i) Designing the component to meet required conditions of a Power Pack
(ii)Modeling & Detailing in Pro/e Wildfire Sheet metal

Title Variable Mach Numbers For Flow Nozzle.
Client L&T e-ES,Bangalore,Karnataka
Team 11
Software Pro-E (Version 2001)
Role (i) Designing &analyzing the component to meet required conditions of a wind tunnel used in aerospace.
(ii) Assembling components of VMFN using Pro/Assembly
(iii)Modeling & detailing of the components in pro\e.
(iv)Reporting the results after completion of the respective component.
(v)Checking the intersecting components
(vi)Calculations of various component at different pressure conditions & comparing the same with Ansys results

Title Scroll Line Conversion
Client EDEC, Pune, India.
Team 2
Software Pro-E (Version 2001)
Role (i) Using Pro/Intralink, Main Frame,
(ii) Assembling components of Condensing Unit using Pro/Assembly
(iii)Modeling & detailing of the components in pro\e.
(iv)Replacing the old compressors with New Space
Compressors, accordingly replacing the appropriate Tube assemblies.
(v)Checking the electrical circuits of 1 & 3 phases Fan Motors.
(vi)Preparing BOM, Taking Engineering Notification, & Submitting the Quality Work Bench.

Title Compressor Power Cable Location
Client EDEC, Pune, India.
Team 1
Software Pro-E (Version 2001), View Port, QWB
Role (i) Using Pro/Intralink, Main Frame,
(ii) Assembling components of Condensing Unit using Pro/Assembly
(iii)Modeling & detailing of the components in pro\e.
(iv)Placing the compressors Power Cables location, checking the Compressors, other components which is effecting the change.
(v)Preparing BOM, Taking Engineering Notification, & Submitting the Quality Work Bench.

Title Conduit Location
Client EDEC, Pune, India.
Team 1
Software Pro-E (Version 2001), View Port, QWB
Role (i) Using Pro/Intralink, Main Frame,
(ii) Assembling components of Condensing Unit using Pro/Assembly
(iii)Modeling & detailing of the components in pro\e.
(iv)Placing the Conduit location, checking the other components which got effected by the change.
(v)Preparing BOM, Issuing Final Engineering Notification, & Submitting the Quality Work Bench.

Title D-Line Condensing Unit
Client EDEC, Pune, India
Team 1
Software Pro-E (Version 2001), View Port, QWB
Role (i) Using Pro/Intralink, Main Frame,
(ii) Assembling components of Condensing Unit using Pro/Assembly
(iii)Modeling & detailing of the components in pro\e.
(iv)Placing the Conduit location, checking the other components which got effected by the change.
(v)Preparing BOM, Issuing Final Engineering Notification, & Submitting the Quality Work Bench.

Title Outline s (OMP)
Client GE, INDSYS (Fort Wayne), India.
Team 4
Software Pro-E (Version 2001)
Role (i) Using Pro/Intralink.
(ii) Assembling components of Motor using Pro/Assembly
(iii)Modeling & detailing shafts in pro\e.
(iv)Maintaining the quality of solid models as per the Standard & Client requirements.

Title Induction Motor Outlines (PMP)
Client GE, INDSYS (Fort Wayne)
Team 4
Software Pro-E (Version 2001)
Role (i) Using Pro/Intralink.
(ii) Assembling with skeletons, components of Motor using Pro/Assembly
(iii)Maintaining the quality of solid models as per the Standard & Client requirements.

Title Modeling End shields of 210 TEFC.
Client GE, INDSYS (Fort Wayne)
Team 1
Software Pro-E (Version 2001)
Role (i) Using Pro/Intralink.
(ii) Modeling of End shield using Pro/Assembly module
(iii)Maintaining the quality of solid models as per the
Standard & Client requirements.

Title Modeling End shields of 250 TEFC
Client GE, INDSYS (Fort Wayne)
Team 1
Software Pro-E (Version 2001)
Role (i) Using Pro/Intralink.
(ii) Modeling of End shield using Top Down Design
Methodology, using Pro/Assembly Module to maintain clients required stds.

Title Modeling End shields of 500 DP Frame Motors
Client GE, INDSYS (Fort Wayne)
Team 1
Software Pro-E (Version 2001)
Role (i) Using Pro/Intralink.
(ii) Modeling of End shield using Top Down Design Methodology, using Pro/Assembly Module
(iii) Maintaining the quality of solid models as per the Standard & Client requirements.

Title Reduction Gear Box. 3000 HP
Client Lufkin, France
Team 4
Software Pro-E (Version 2001)
Role (i) Variation Check of Gear Box Assemblies using Pro/E Module.
(ii) Modeling of Gear - Boxes using Top Down Design Methodology, using Pro/Assembly Module
(iii) Maintaining the quality of solid models as per the Standard & Client requirements.

Title Assembly Work for Internal Fan Alternator (Automation)
Client Lucas - TVS, Padi, Chennai
Team 4
Software Pro-E (Version 2001)
Role (i) Modeling Alternator Components using Top Down Design Methodology.
(ii) Various parts and Sub - Assemblies have been created Detailing also done as part of the project.

Title Modeling of Transmission Casing
Team 4
Software Pro-E (Version 2001)
Role (i)Modeling Designing and drafting of the transmission casing, which is used to hold gear mechanism of tractor and supports whole body of the vehicle.
(ii) Maintaining the quality of solid models as per the Standard & Client requirements.

Title Modeling of Clutch Housing
Team 4
Software Pro-E (Version 2001)
Role (i) Modeling of Clutch Housing, which is used to hold the clutch assembly of the tractor.
(ii) Identify and record any Problems relating to the Model and Assembly
(iii) Maintaining the quality of solid models.

Academic Projects:

Title Graphics Programming approach for Projection of line using Ansi C.
Description:
In this project the usage of C language and Engineering graphics principles of 1st angle projection to obtain the projection of straight lines which displays on the monitor.

Title Computer automated part programming & Interfacing CNC Lathe with PC.
Description:
In this project the software for the PC based CNC accessory devices. Communication program. CNC editor, conversational CNC control & Graphical simulation has been developed, which is beneficial to enter and verify the data offline.

Personal Details:
Date of Birth: 09/04/1980
Present Location: San Diego.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 2383)

Go to Search Parameters...

Brief Description

Research Experience: Polymer solutions and adsorption behavior.

My Resume

I can type anything fast on the computer, I type 45 words per minute, I clean very well, because I love a clean house! I can do pretty much anything if I was trained for a job! I just love working, the job I have now is a Home Maker for the Elders, but I want more hours because I love to work!

System Administrator (Desktop/Windows support)

Looking for Instrumentation and controls job

I am a Quality Health and Safety Management Consultant with more than 16 years experience in Middle East . I am a Lead Auditor for ISO9001:2000; ISO14001:2004 and OHSAS18001:2007. Apart from this I am NEBOSH-UK Certified HSE Advisor . Has rich exerience in evaluating Management systems

Qualified, results-producing Management Professional with experience steering and directing all aspects of operations, administration, budgeting, and equipment maintenance. Successful in managing multiple projects with compelling priorities involving program development.

Hydrogeological Technologist - 4 years experience in mining and water supply industries, International experience

Developed ability to work in a fast-paced atmosphere Maintained excellent customer relations and developed customer rapport

Senior management professional with extensive experience in Management & Operations of IT & Telecom Networked Infrastructure and Systems, Managed Services, Information Security, Process Modeling, SAP Implementation, Consultancy etc across industry segments.

My geological background is unconventional, international, and interdisciplinary; from the petroleum and mining industries, university teaching in China and USA, petroleum-related research in Norway, to mining-exploration and management positions in Laos and Malaysia.

Marine Operations, Shipping, Logistics, Port Management, Ship Agency, Representation in Ukraine at port of Berdyansk

1. Designing, Estimating and Costing 2. To make the perspective techno commercial offer

8 years of professional experience in Administration and personal assistance.

Office Assistant / Helper

HSE MANAGER wide range of industries

Safety & Environmental Specialist with excellent knowledge and experience. Please refer my resume with complete details available.

Mcsa, Mcse

2 years au pair and 6 months in shop

Experienced Ops Engineer

Financial and management reporting system, financial & business process analysis, auditing, budgeting, taxation, financial planning and forecasting, performance management system, activity-based costing, market research and development, process and system documentation,

Eco-friendly Architect, Revit, Autocad, 3D max, SketchUp, Photoshop, Flash, Coral-draw, Illustrator, Rhino3D.

Basic Soft Skills (Communication Skills, Presentation Skills, Team Working, Technical & Business Writing)

3rd Year Enviromental Technologist

Working with Kuwait Petroleum Corporation for more than 3 years, Masters in English Literature, Good in Ms. Office,Excellent communication & interpersonal skills, Excellent time- management skills, Multitasked, Maintains confidentiality, Self- motivated, Can work under pressure, Hard working.

Office & IT Skills

Sales, Engineering Project Manager

Administrative Coordination, Legal Research, Legal Administration & Analysis, Evaluation & Monitoring, Case Management, Project Management, Outreach, and Computing.

Masters in Materials Processing & Engineering ,B.Sc. Chemical engineering ,Metals Testing (Destructive and NDT), Metallography, Heat Treatment Techniques, Structure investigation, Failure analysis, Technical report writing

Sr. Engineering Recruiter

Electrical Engineer with wireless, optical and integration expertise

Applying for the post of safety officer in your esteemed concern

Professional Engioeer

Experienced mechanical, civil engineer and land surveyor. Emplayed in mining, railroads, building, construction and other projects. Supervisor of other engineers and contractors. Plant engineer including hazardous waste. air quality and environmental health (OSHA).

Sound oil & gas production operations and excellent management skills.

Technical/General English Instructor. Certified. BA and MA. Employed in field since 1988. Overseas experience in Middle East and Far East including oil and gas industry.

Technical Recruitments, AutoCAD

Pip in indistrial safety, working in ministry of elec & water ,kuwait.

Mechanical Engineer with 7 years of hands on experience, A Qualified Lead auditor for ISO 9001:2000, ISO 14001:2004 & OHSAS 18001:1999

Resume for ordinary employment

Automobile related

I am Masters Degree holder in Mineral Process and Diploma (PG) in Energy & Environmental Management

Working as Procurement head to handle all the Project items needed for constructions and Mining. Good in MSoffice/Computer/ERP/SAP/ORACLE.

i have passed chemical engineering which is of 4 year and passed Environment protection Technician fron Centennial collge,Toronto.

I am a Chemical Engineering graduate having 17+ years experience in the field of Safety, Occupational Health &Environment.

At present doing a 2 year contract at a bulk fuel installation, in Basrah, Iraq, as an Operator. I have 25 years experience as a fire fighter and paramedic and the last 2 years have been doing aviation and road fuels at an Airport and bulk fuel installation

Prevent / correct unsafe acts & condition.

I have completed my M.Tech. in applied geology from the Indian Institute of Technology Roorkee presently working as a Manager Geologist in DGDC Ltd.,I am looking for a job of Geologis ,

Project and maintenance work experience in power generation, transmission and distribution , steam raising plant,,,large power transformers, AC motors, DC motors and drives ,power factor control equipment, energy management systems, (PLC) & SCADA , Instrumentation and Control Engineering

Enthusiastic & experienced Materials/ Purchasing/ Project Manager

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Seach Parameters


Change search parameters...
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out